| Age | Commit message (Collapse) | Author |
|---|
|
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're
required whether or not A.OUT format is available.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix typo in comments.
BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise
checkpatch.pl will be complaining.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Function timekeeping_is_continuous() no longer checks flag
CLOCK_IS_CONTINUOUS, and it checks CLOCK_SOURCE_VALID_FOR_HRES now. So rename
the function accordingly.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's only one caller left - the kill_pgrp one - so merge these two
functions and forget the kill_pgrp_info one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reviewed-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
signal_struct->tsk points to the ->group_leader and thus we have the nasty
code in de_thread() which has to change it and restart ->real_timer if the
leader is changed.
Use "struct pid *leader_pid" instead. This also allows us to kill now
unneeded send_group_sig_info().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
twice
There is a window when de_thread() switches the leader and drops
tasklist_lock. In that window do_each_pid_task(PIDTYPE_PID) finds both new
and old leaders.
The problem is pretty much theoretical and probably can be ignored. Currently
the only users of do_each_pid_task(PIDTYPE_PID) are send_sigio/send_sigurg, so
they can send the signal to the same process twice.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pid_vnr returns the user space pid with respect to the pid namespace the
struct pid was allocated in. What we want before we return a pid to user
space is the user space pid with respect to the pid namespace of current.
pid_vnr is a very nice optimization but because it isn't quite what we want
it is easy to use pid_vnr at times when we aren't certain the struct pid
was allocated in our pid namespace.
Currently this describes at least tiocgpgrp and tiocgsid in ttyio.c the
parent process reported in the core dumps and the parent process in
get_signal_to_deliver.
So unless the performance impact is huge having an interface that does what
we want instead of always what we want should be much more reliable and
much less error prone.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_signal_stop() counts all sub-thread and sets ->group_stop_count
accordingly. Every thread should decrement ->group_stop_count and stop,
the last one should notify the parent.
However a sub-thread can exit before it notices the signal_pending(), or it
may be somewhere in do_exit() already. In that case the group stop never
finishes properly.
Note: this is a minimal fix, we can add some optimizations later. Say we
can return quickly if thread_group_empty(). Also, we can move some signal
related code from exit_notify() to exit_signals().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change set_special_pids() to work with struct pid, not pid_t from global name
space. This again speedups and imho cleanups the code, also a preparation for
the next patch.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the patch
"Fix ptrace_attach()/ptrace_traceme()/de_thread() race"
commit f5b40e363ad6041a96e3da32281d8faa191597b9
we set PT_ATTACHED and change child->parent "atomically" wrt task_list lock.
This means we can remove the checks like "PT_ATTACHED && ->parent != ptracer"
which were needed to catch the "ptrace attach is in progress" case. We can
also remove the flag itself since nobody else uses it.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sem_exit_ns(), msg_exit_ns() and shm_exit_ns() are all called when an
ipc_namespace is released to free all ipcs of each type. But in fact, they
do the same thing: they loop around all ipcs to free them individually by
calling a specific routine.
This patch proposes to consolidate this by introducing a common function,
free_ipcs(), that do the job. The specific routine to call on each
individual ipcs is passed as parameter. For this, these ipc-specific
'free' routines are reworked to take a generic 'struct ipc_perm' as
parameter.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Each ipc_namespace contains a table of 3 pointers to struct ipc_ids (3 for
msg, sem and shm, structure used to store all ipcs) These 'struct ipc_ids'
are dynamically allocated for each icp_namespace as the ipc_namespace
itself (for the init namespace, they are initialized with pointers to
static variables instead)
It is so for historical reason: in fact, before the use of idr to store the
ipcs, the ipcs were stored in tables of variable length, depending of the
maximum number of ipc allowed. Now, these 'struct ipc_ids' have a fixed
size. As they are allocated in any cases for each new ipc_namespace, there
is no gain of memory in having them allocated separately of the struct
ipc_namespace.
This patch proposes to make this table static in the struct ipc_namespace.
Thus, we can allocate all in once and get rid of all the code needed to
allocate and free these ipc_ids separately.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Acked-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Get the constness right, avoid nasty cast.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Backend for s390.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Give architectures that support the new termios2 the possibilty to overide the
user_termios_to_kernel_termios and kernel_termios_to_user_termios macros. As
soon as all architectures that use the generic variant have been converted the
ifdefs can go away again. Architectures in question are avr32, frv, powerpc
and s390.
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix an off by one bug in the fault reason string reporting function, and
clean up some of the code around this buglet.
[akpm@linux-foundation.org: cleanup]
Signed-off-by: mark gross <mgross@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Typical PDE creation code looks like:
pde = create_proc_entry("foo", 0, NULL);
if (pde)
pde->proc_fops = &foo_proc_fops;
Notice that PDE is first created, only then ->proc_fops is set up to
final value. This is a problem because right after creation
a) PDE is fully visible in /proc , and
b) ->proc_fops are proc_file_operations which do not have ->open callback. So, it's
possible to ->read without ->open (see one class of oopses below).
The fix is new API called proc_create() which makes sure ->proc_fops are
set up before gluing PDE to main tree. Typical new code looks like:
pde = proc_create("foo", 0, NULL, &foo_proc_fops);
if (!pde)
return -ENOMEM;
Fix most networking users for a start.
In the long run, create_proc_entry() for regular files will go.
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000024
printing eip: c1188c1b *pdpt = 000000002929e001 *pde = 0000000000000000
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/block/sda/sda1/dev
Modules linked in: foo af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom
Pid: 24679, comm: cat Not tainted (2.6.24-rc3-mm1 #2)
EIP: 0060:[<c1188c1b>] EFLAGS: 00210002 CPU: 0
EIP is at mutex_lock_nested+0x75/0x25d
EAX: 000006fe EBX: fffffffb ECX: 00001000 EDX: e9340570
ESI: 00000020 EDI: 00200246 EBP: e9340570 ESP: e8ea1ef8
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 24679, ti=E8EA1000 task=E9340570 task.ti=E8EA1000)
Stack: 00000000 c106f7ce e8ee05b4 00000000 00000001 458003d0 f6fb6f20 fffffffb
00000000 c106f7aa 00001000 c106f7ce 08ae9000 f6db53f0 00000020 00200246
00000000 00000002 00000000 00200246 00200246 e8ee05a0 fffffffb e8ee0550
Call Trace:
[<c106f7ce>] seq_read+0x24/0x28a
[<c106f7aa>] seq_read+0x0/0x28a
[<c106f7ce>] seq_read+0x24/0x28a
[<c106f7aa>] seq_read+0x0/0x28a
[<c10818b8>] proc_reg_read+0x60/0x73
[<c1081858>] proc_reg_read+0x0/0x73
[<c105a34f>] vfs_read+0x6c/0x8b
[<c105a6f3>] sys_read+0x3c/0x63
[<c10025f2>] sysenter_past_esp+0x5f/0xa5
[<c10697a7>] destroy_inode+0x24/0x33
=======================
INFO: lockdep is turned off.
Code: 75 21 68 e1 1a 19 c1 68 87 00 00 00 68 b8 e8 1f c1 68 25 73 1f c1 e8 84 06 e9 ff e8 52 b8 e7 ff 83 c4 10 9c 5f fa e8 28 89 ea ff <f0> fe 4e 04 79 0a f3 90 80 7e 04 00 7e f8 eb f0 39 76 34 74 33
EIP: [<c1188c1b>] mutex_lock_nested+0x75/0x25d SS:ESP 0068:e8ea1ef8
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we possibly lookup the pid in the wrong pid namespace. So
seq_file convert proc_pid_status which ensures the proper pid namespaces is
passed in.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: another build fix]
[akpm@linux-foundation.org: s390 build fix]
[akpm@linux-foundation.org: fix task_name() output]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrew Morgan <morgan@kernel.org>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently many /proc/pid files use a crufty precursor to the current seq_file
api, and they don't have direct access to the pid_namespace or the pid of for
which they are displaying data.
So implement proc_single_file_operations to make the seq_file routines easy to
use, and to give access to the full state of the pid of we are displaying data
for.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just like with the user namespaces, move the namespace management code into
the separate .c file and mark the (already existing) PID_NS option as "depend
on NAMESPACES"
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the IPC namespace management code is spread over the ipc/*.c files.
I moved this code into ipc/namespace.c file which is compiled out when needed.
The linux/ipc_namespace.h file is used to store the prototypes of the
functions in namespace.c and the stubs for NAMESPACES=n case. This is done
so, because the stub for copy_ipc_namespace requires the knowledge of the
CLONE_NEWIPC flag, which is in sched.h. But the linux/ipc.h file itself in
included into many many .c files via the sys.h->sem.h sequence so adding the
sched.h into it will make all these .c depend on sched.h which is not that
good. On the other hand the knowledge about the namespaces stuff is required
in 4 .c files only.
Besides, this patch compiles out some auxiliary functions from ipc/sem.c,
msg.c and shm.c files. It turned out that moving these functions into
namespaces.c is not that easy because they use many other calls and macros
from the original file. Moving them would make this patch complicated. On
the other hand all these functions can be consolidated, so I will send a
separate patch doing this a bit later.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently all the namespace management code is in the kernel/utsname.c file,
so just compile it out and make stubs in the appropriate header.
The init namespace itself is in init/version.c and is in the kernel all the
time.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I replaced hugetlb_dynamic_pool with nr_overcommit_hugepages I used
proc_doulongvec_minmax() directly. However, hugetlb.c's locking rules
require that all counter modifications occur under the hugetlb_lock. Add a
callback into the hugetlb code similar to the one for nr_hugepages. Grab
the lock around the manipulation of nr_overcommit_hugepages in
proc_doulongvec_minmax().
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (44 commits)
dm raid1: report fault status
dm raid1: handle read failures
dm raid1: fix EIO after log failure
dm raid1: handle recovery failures
dm raid1: handle write failures
dm snapshot: combine consecutive exceptions in memory
dm: stripe enhanced status return
dm: stripe trigger event on failure
dm log: auto load modules
dm: move deferred bio flushing to workqueue
dm crypt: use async crypto
dm crypt: prepare async callback fn
dm crypt: add completion for async
dm crypt: add async request mempool
dm crypt: extract scatterlist processing
dm crypt: tidy io ref counting
dm crypt: introduce crypt_write_io_loop
dm crypt: abstract crypt_write_done
dm crypt: store sector mapping in dm_crypt_io
dm crypt: move queue functions
...
|
|
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (59 commits)
hwmon: (lm80) Add individual alarm files
hwmon: (lm80) De-macro the sysfs callbacks
hwmon: (lm80) Various cleanups
hwmon: (w83627hf) Refactor beep enable handling
hwmon: (w83627hf) Add individual alarm and beep files
hwmon: (w83627hf) Enable VBAT monitoring
hwmon: (w83627ehf) The W83627DHG has 8 VID pins
hwmon: (asb100) Add individual alarm files
hwmon: (asb100) De-macro the sysfs callbacks
hwmon: (asb100) Various cleanups
hwmon: VRM is not written to registers
hwmon: (dme1737) fix Super-IO device ID override
hwmon: (dme1737) fix divide-by-0
hwmon: (abituguru3) Add AUX4 fan input for Abit IP35 Pro
hwmon: Add support for Texas Instruments/Burr-Brown ADS7828
hwmon: (adm9240) Add individual alarm files
hwmon: (lm77) Add individual alarm files
hwmon: Discard useless I2C driver IDs
hwmon: (lm85) Make the pwmN_enable files writable
hwmon: (lm85) Return standard values in pwmN_enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm
* 'slub-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
SLUB: fix checkpatch warnings
Use non atomic unlock
SLUB: Support for performance statistics
SLUB: Alternate fast paths using cmpxchg_local
SLUB: Use unique end pointer for each slab page.
SLUB: Deal with annoying gcc warning on kfree()
|
|
Save some bytes.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
|
|
Move compat_ioctl handling into dm-ioctl.c.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
|
|
The statistics provided here allow the monitoring of allocator behavior but
at the cost of some (minimal) loss of performance. Counters are placed in
SLUB's per cpu data structure. The per cpu structure may be extended by the
statistics to grow larger than one cacheline which will increase the cache
footprint of SLUB.
There is a compile option to enable/disable the inclusion of the runtime
statistics and its off by default.
The slabinfo tool is enhanced to support these statistics via two options:
-D Switches the line of information displayed for a slab from size
mode to activity mode.
-A Sorts the slabs displayed by activity. This allows the display of
the slabs most important to the performance of a certain load.
-r Report option will report detailed statistics on
Example (tbench load):
slabinfo -AD ->Shows the most active slabs
Name Objects Alloc Free %Fast
skbuff_fclone_cache 33 111953835 111953835 99 99
:0000192 2666 5283688 5281047 99 99
:0001024 849 5247230 5246389 83 83
vm_area_struct 1349 119642 118355 91 22
:0004096 15 66753 66751 98 98
:0000064 2067 25297 23383 98 78
dentry 10259 28635 18464 91 45
:0000080 11004 18950 8089 98 98
:0000096 1703 12358 10784 99 98
:0000128 762 10582 9875 94 18
:0000512 184 9807 9647 95 81
:0002048 479 9669 9195 83 65
anon_vma 777 9461 9002 99 71
kmalloc-8 6492 9981 5624 99 97
:0000768 258 7174 6931 58 15
So the skbuff_fclone_cache is of highest importance for the tbench load.
Pretty high load on the 192 sized slab. Look for the aliases
slabinfo -a | grep 000192
:0000192 <- xfs_btree_cur filp kmalloc-192 uid_cache tw_sock_TCP
request_sock_TCPv6 tw_sock_TCPv6 skbuff_head_cache xfs_ili
Likely skbuff_head_cache.
Looking into the statistics of the skbuff_fclone_cache is possible through
slabinfo skbuff_fclone_cache ->-r option implied if cache name is mentioned
.... Usual output ...
Slab Perf Counter Alloc Free %Al %Fr
--------------------------------------------------
Fastpath 111953360 111946981 99 99
Slowpath 1044 7423 0 0
Page Alloc 272 264 0 0
Add partial 25 325 0 0
Remove partial 86 264 0 0
RemoteObj/SlabFrozen 350 4832 0 0
Total 111954404 111954404
Flushes 49 Refill 0
Deactivate Full=325(92%) Empty=0(0%) ToHead=24(6%) ToTail=1(0%)
Looks good because the fastpath is overwhelmingly taken.
skbuff_head_cache:
Slab Perf Counter Alloc Free %Al %Fr
--------------------------------------------------
Fastpath 5297262 5259882 99 99
Slowpath 4477 39586 0 0
Page Alloc 937 824 0 0
Add partial 0 2515 0 0
Remove partial 1691 824 0 0
RemoteObj/SlabFrozen 2621 9684 0 0
Total 5301739 5299468
Deactivate Full=2620(100%) Empty=0(0%) ToHead=0(0%) ToTail=0(0%)
Descriptions of the output:
Total: The total number of allocation and frees that occurred for a
slab
Fastpath: The number of allocations/frees that used the fastpath.
Slowpath: Other allocations
Page Alloc: Number of calls to the page allocator as a result of slowpath
processing
Add Partial: Number of slabs added to the partial list through free or
alloc (occurs during cpuslab flushes)
Remove Partial: Number of slabs removed from the partial list as a result of
allocations retrieving a partial slab or by a free freeing
the last object of a slab.
RemoteObj/Froz: How many times were remotely freed object encountered when a
slab was about to be deactivated. Frozen: How many times was
free able to skip list processing because the slab was in use
as the cpuslab of another processor.
Flushes: Number of times the cpuslab was flushed on request
(kmem_cache_shrink, may result from races in __slab_alloc)
Refill: Number of times we were able to refill the cpuslab from
remotely freed objects for the same slab.
Deactivate: Statistics how slabs were deactivated. Shows how they were
put onto the partial list.
In general fastpath is very good. Slowpath without partial list processing is
also desirable. Any touching of partial list uses node specific locks which
may potentially cause list lock contention.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
|
|
We use a NULL pointer on freelists to signal that there are no more objects.
However the NULL pointers of all slabs match in contrast to the pointers to
the real objects which are in different ranges for different slab pages.
Change the end pointer to be a pointer to the first object and set bit 0.
Every slab will then have a different end pointer. This is necessary to ensure
that end markers can be matched to the source slab during cmpxchg_local.
Bring back the use of the mapping field by SLUB since we would otherwise have
to call a relatively expensive function page_address() in __slab_alloc(). Use
of the mapping field allows avoiding a call to page_address() in various other
functions as well.
There is no need to change the page_mapping() function since bit 0 is set on
the mapping as also for anonymous pages. page_mapping(slab_page) will
therefore still return NULL although the mapping field is overloaded.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Many I2C hwmon drivers define a driver ID but no other code references
these, meaning that they are useless. Discard them, along with a few
IDs which are defined but never used at all.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
|
* Drop unused defines
* Drop unused driver ID
* Remove trailing whitespace
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
|
* Drop trailing spaces
* Drop unused driver ID
* Drop stray backslashes in macros
* Rename new_client to client
* Drop redundant initializations to 0
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
|
* Drop history, it doesn't belong there
* Drop unused struct member
* Drop bogus struct member comment
* Drop unused driver ID
* Rename new_client to client
* Drop redundant initializations to 0
* Drop useless cast
* Drop trailing space
* Fix comment
* Drop duplicate comment
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
|
Let drivers walk the DMI table for their own needs. Some drivers need
data stored in OEM-specific DMI records for proper operation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (48 commits)
[SCSI] aacraid: do not set valid bit in sense information
[SCSI] ses: add new Enclosure ULD
[SCSI] enclosure: add support for enclosure services
[SCSI] sr: fix test unit ready responses
[SCSI] u14-34f: fix data direction bug
[SCSI] aacraid: pci_set_dma_max_seg_size opened up for late model controllers
[SCSI] fix BUG when sum(scatterlist) > bufflen
[SCSI] arcmsr: updates (1.20.00.15)
[SCSI] advansys: make 3 functions static
[SCSI] Small cleanups for scsi_host.h
[SCSI] dc395x: fix uninitialized var warning
[SCSI] NCR53C9x: remove driver
[SCSI] remove m68k NCR53C9x based drivers
[SCSI] dec_esp: Remove driver
[SCSI] kernel-doc: fix scsi docbook
[SCSI] update my email address
[SCSI] add protocol definitions
[SCSI] sd: handle bad lba in sense information
[SCSI] qla2xxx: Update version number to 8.02.00-k8.
[SCSI] qla2xxx: Correct issue where incorrect init-fw mailbox command was used on non-NPIV capable ISPs.
...
|
|
The enclosure misc device is really just a library providing sysfs
support for physical enclosure devices and their components.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
Small cleanups in scsi_host.h. Few #defines make me wonder if their
description is still up to date..?
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
A lot of SCSI command replies have a protocol ID field. Add
definitions for the interpretation of that from SPC-3.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
The session age mask is only 4 bits, but session->age is 32. When
it gets larger then 15 and we try to or the bits some bits get
dropped and the check for session age in iscsi_verify_itt is useless.
The ISCSI_CID_MASK related bits are also useless since cid is always
one.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
Some iscsi class messages have the dev_printk prefix and some libiscsi
and iscsi_tcp messages have "iscsi" or the module name as a prefix which
is normally pretty useless when trying to figure out which session
or connection the message is attached to. This patch adds iscsi lib
and class dev_printks so all messages have a common prefix that
can be used to figure out which object printed it.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
In qla4xxx's probe it will call the iscsi session setup functions
for session that got setup on the initial start. This then makes
it easy for the iscsi class to export a helper which indicates
when those scans are done.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
This just adds iscsi session scanning which works like fc rport scanning.
The future patches will hook the drivers into Mathew Wilcox's async
scanning infrastructure, so userspace does not have to special case
iscsi and so userspace does not have to make a extra special case for
hardware iscsi root scanning.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
This adds a iscsi session state file which exports the session
state for both software and hardware iscsi. It also hooks libiscsi
in.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
__iscsi_complete_pdu() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
|
Commit ad7f71674ad7c3c4467e48f6ab9e85516dae2720 ("[POWERPC] Use a
sensible default for clock_getres() in the VDSO") corrected the clock
resolution reported by the VDSO clock_getres() but introduced another
problem in that older versions of gcc (gcc-4.0 and earlier) fail to
compile the new code in arch/powerpc/kernel/asm-offsets.c.
This fixes it by introducing a new MONOTONIC_RES_NSEC define in the
generic code which is equivalent to KTIME_MONOTONIC_RES but is just an
integer constant, not a ktime union.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
Input: i8042 - non-x86 build fix
Input: pxa27x_keypad - also enable on PXA3xx
Input: pxa27x_keypad - add debounce_interval to the keypad platform data
Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
Input: pxa27x_keypad - enable rotary encoders and direct keys
Input: pxa27x_keypad - introduce pxa27x_keypad_config()
Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
Input: pxa27x_keypad - remove pin configuration from the driver
Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
Input: constify function pointer tables (seq_operations)
Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
Input: i8042 - enable DMI quirks on x86-64
Input: i8042 - add Dritek quirk for Acer Aspire 9110
Input: add input event to APM event bridge
Input: mousedev - use BIT_MASK instead of BIT
Input: remove duplicate includes
Input: remove cdev from input_dev structure
Input: remove duplicated headers in drivers/char/keyboard.c
Input: i8042 - add Dritek keyboard extension quirk
Input: add Tosa keyboard driver
...
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC32]: Use regsets in arch_ptrace().
[SPARC64]: Use regsets in arch_ptrace().
[SPARC32]: Use regsets for ELF core dumping.
[SPARC64]: Use regsets for ELF core dumping.
[SPARC64]: Remove unintentional ptrace debugging messages.
[SPARC]: Move over to arch_ptrace().
[SPARC]: Remove PTRACE_SUN* handling.
[SPARC]: Kill DEBUG_PTRACE code.
[SPARC32]: Add user regset support.
[SPARC64]: Add user regsets.
[SPARC64]: Fix booting on non-zero cpu.
|
|
* git://git.infradead.org/mtd-2.6: (120 commits)
[MTD] Fix mtdoops.c compilation
[MTD] [NOR] fix startup lock when using multiple nor flash chips
[MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
[MTD] Fix maps/physmap.c compilation with CONFIG_PM
[MTD] onenand: Add panic_write function to the onenand driver
[MTD] mtdoops: Use the panic_write function when present
[MTD] Add mtd panic_write function pointer
[MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
[MTD] physmap.c: Add support for multiple resources
[MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
[MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
[MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
[MTD] [NAND] Remove unused variable in plat_nand_remove
[MTD] Unlocking all Intel flash that is locked on power up.
[MTD] [NAND] at91_nand: Make mtdparts option can override board info
[MTD] mtdoops: Various minor cleanups
[MTD] mtdoops: Ensure sequential write to the buffer
[MTD] mtdoops: Perform write operations in a workqueue
[MTD] mtdoops: Add further error return code checking
[MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
...
|
