aboutsummaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2011-09-21Bluetooth: Add a flag to indicate that SMP is going onVinicius Costa Gomes
Add HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending for that connection. This allows to have information that an SMP procedure is going on for that connection. We use the HCI_CONN_ENCRYPT_PEND to indicate that encryption (HCI_LE_Start_Encryption) is pending for that connection. While a SMP procedure is going on we hold an reference to the connection, to avoid disconnections. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: make use of connection number to optimize the schedulerLuiz Augusto von Dentz
This checks if there is any existing connection according to its type before start iterating in the list and immediately stop iterating when reaching the number of connections. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-20NFC: basic NCI protocol implementationIlan Elias
The NFC Controller Interface (NCI) is a standard communication protocol between an NFC Controller (NFCC) and a Device Host (DH), defined by the NFC Forum. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: move nfc.h from include/net to include/net/nfcIlan Elias
The file nfc.h was moved from include/net to include/net/nfc, since new NFC header files will be added to include/net/nfc. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: Add dev_up and dev_down control operationsIlan Elias
Add 2 new nfc control operations: dev_up to turn on the nfc device dev_down to turn off the nfc device Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20mac80211: fix indentationAlexander Simon
Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-19cfg80211/nl80211: Add PMKSA caching candidate eventJouni Malinen
When the driver (or most likely firmware) decides which AP to use for roaming based on internal scan result processing, user space needs to be notified of PMKSA caching candidates to allow RSN pre-authentication to be used. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19cfg80211: add cfg80211_find_vendor_ie() functionEliad Peller
Add function to find vendor-specific ie (along with vendor-specific ie struct definition and P2P OUI values) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into ↵John W. Linville
for-davem
2011-09-18tcp: fix build error if !CONFIG_SYN_COOKIESEric Dumazet
commit 946cedccbd7387 (tcp: Change possible SYN flooding messages) added a build error if CONFIG_SYN_COOKIES=n Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-18Merge git://github.com/davem330/netLinus Torvalds
* git://github.com/davem330/net: (62 commits) ipv6: don't use inetpeer to store metrics for routes. can: ti_hecc: include linux/io.h IRDA: Fix global type conflicts in net/irda/irsysctl.c v2 net: Handle different key sizes between address families in flow cache net: Align AF-specific flowi structs to long ipv4: Fix fib_info->fib_metrics leak caif: fix a potential NULL dereference sctp: deal with multiple COOKIE_ECHO chunks ibmveth: Fix checksum offload failure handling ibmveth: Checksum offload is always disabled ibmveth: Fix issue with DMA mapping failure ibmveth: Fix DMA unmap error pch_gbe: support ML7831 IOH pch_gbe: added the process of FIFO over run error pch_gbe: fixed the issue which receives an unnecessary packet. sfc: Use 64-bit writes for TX push where possible Revert "sfc: Use write-combining to reduce TX latency" and follow-ups bnx2x: Fix ethtool advertisement bnx2x: Fix 578xx link LED bnx2x: Fix XMAC loopback test ...
2011-09-17tcp: md5: remove one indirection level in tcp_md5sig_poolEric Dumazet
tcp_md5sig_pool is currently an 'array' (a percpu object) of pointers to struct tcp_md5sig_pool. Only the pointers are NUMA aware, but objects themselves are all allocated on a single node. Remove this extra indirection to get proper percpu memory (NUMA aware) and make code simpler. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16Revert "Scm: Remove unnecessary pid & credential references in Unix socket's ↵David S. Miller
send and receive path" This reverts commit 0856a304091b33a8e8f9f9c98e776f425af2b625. As requested by Eric Dumazet, it has various ref-counting problems and has introduced regressions. Eric will add a more suitable version of this performance fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16wan: make LAPB callbacks conststephen hemminger
This is compile tested only. Suggested by dumpster diving in PAX. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16net: Handle different key sizes between address families in flow cachedpward
With the conversion of struct flowi to a union of AF-specific structs, some operations on the flow cache need to account for the exact size of the key. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16net: Align AF-specific flowi structs to longDavid Ward
AF-specific flowi structs are now passed to flow_key_compare, which must also be aligned to a long. Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16sctp: deal with multiple COOKIE_ECHO chunksMax Matveev
Attempt to reduce the number of IP packets emitted in response to single SCTP packet (2e3216cd) introduced a complication - if a packet contains two COOKIE_ECHO chunks and nothing else then SCTP state machine corks the socket while processing first COOKIE_ECHO and then loses the association and forgets to uncork the socket. To deal with the issue add new SCTP command which can be used to set association explictly. Use this new command when processing second COOKIE_ECHO chunk to restore the context for SCTP state machine. Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16nl80211/cfg80211/mac80211: fix wme docsEliad Peller
Add/fix some missing docs. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16Merge branch 'master' of ../netdev/David S. Miller
2011-09-15tcp: Change possible SYN flooding messagesEric Dumazet
"Possible SYN flooding on port xxxx " messages can fill logs on servers. Change logic to log the message only once per listener, and add two new SNMP counters to track : TCPReqQFullDoCookies : number of times a SYNCOOKIE was replied to client TCPReqQFullDrop : number of times a SYN request was dropped because syncookies were not enabled. Based on a prior patch from Tom Herbert, and suggestions from David. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-14wireless: fix kernel-doc warning in net/cfg80211.hRandy Dunlap
Fix kernel-doc warning in net/cfg80211.h: Warning(include/net/cfg80211.h:1884): No description found for parameter 'registered' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: add ssid config to bss information in AP-modeArik Nemtsov
Set SSID information from nl80211 beacon parameters. Advertise changes in SSID to low level drivers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: make ieee80211_send_bar available for driversFelix Fietkau
To properly maintain the peer's block ack window, the driver needs to be able to control the new starting sequence number that is sent along with the BlockAckReq frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13nl80211/cfg80211: add match filtering for sched_scanLuciano Coelho
Introduce filtering for scheduled scans to reduce the number of unnecessary results (which cause useless wake-ups). Add a new nested attribute where sets of parameters to be matched can be passed when starting a scheduled scan. Only scan results that match any of the sets will be returned. At this point, the set consists of a single parameter, an SSID. This can be easily extended in the future to support more complex matches. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flagEliad Peller
add WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on AP mode. Advertise it to userspace by including a new NL80211_ATTR_SUPPORT_AP_UAPSD attribute. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: add flag to indicate HW only Tx-agg setup supportArik Nemtsov
When this flag is set, Tx A-MPDU sessions will not be started by mac80211. This flag is required for devices that support Tx A-MPDU setup in hardware. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13cfg80211/nl80211: Indicate roaming feature capability to userspace.Vivek Natarajan
When the rssi of the current AP drops, both wpa_supplicant and the firmware may do a background scan to find a better AP and try to associate. Since firmware based roaming is faster, inform wpa_supplicant to avoid roaming and let the firmware decide to roam if necessary. For fullmac drivers like ath6kl, it is just enough to provide the ESSID and the firmware will decide on the BSSID. Since it is not possible to do pre-auth during roaming for fullmac drivers, the wpa_supplicant needs to completely disconnect with the old AP and reconnect with the new AP. This consumes lot of time and it is better to leave the roaming decision to the firmware. Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-09-08wireless: fix kernel-doc warning in net/cfg80211.hRandy Dunlap
Fix kernel-doc warning in net/cfg80211.h: Warning(include/net/cfg80211.h:1884): No description found for parameter 'registered' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-06fs/9p: Use protocol-defined value for lock/getlock 'type' field.Jim Garlick
Signed-off-by: Jim Garlick <garlick@llnl.gov> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-09-06fs/9p: Add OS dependent open flags in 9p protocolAneesh Kumar K.V
Some of the flags are OS/arch dependent we add a 9p protocol value which maps to asm-generic/fcntl.h values in Linux Based on the original patch from Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-08-30net: relax PKTINFO non local ipv6 udp xmit checkMaciej Żenczykowski
Allow transparent sockets to be less restrictive about the source ip of ipv6 udp packets being sent. Google-Bug-Id: 5018138 Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: "Erik Kline" <ek@google.com> CC: "Lorenzo Colitti" <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29cfg80211: document wiphy->registeredStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-08-26wireless: relicense regulatory header to ISCLuis R. Rodriguez
I will suck out stuff to userspace to start the regulatory revampamp, this work will be permissively licensed. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26mac80211: add uapsd_queues and max_sp params fieldsEliad Peller
Add uapsd_queues and max_sp fields to ieee80211_sta. These fields might be needed by low-level drivers in order to configure the AP. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26nl80211/cfg80211: add STA WME parametersEliad Peller
Add new NL80211_ATTR_STA_WME nested attribute that contains wme params needed by the low-level driver (uapsd_queues and max_sp). Add these params to the station_parameters struct as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-24Scm: Remove unnecessary pid & credential references in Unix socket's send ↵Tim Chen
and receive path Patch series 109f6e39..7361c36c back in 2.6.36 added functionality to allow credentials to work across pid namespaces for packets sent via UNIX sockets. However, the atomic reference counts on pid and credentials caused plenty of cache bouncing when there are numerous threads of the same pid sharing a UNIX socket. This patch mitigates the problem by eliminating extraneous reference counts on pid and credentials on both send and receive path of UNIX sockets. I found a 2x improvement in hackbench's threaded case. On the receive path in unix_dgram_recvmsg, currently there is an increment of reference count on pid and credentials in scm_set_cred. Then there are two decrement of the reference counts. Once in scm_recv and once when skb_free_datagram call skb->destructor function unix_destruct_scm. One pair of increment and decrement of ref count on pid and credentials can be eliminated from the receive path. Until we destroy the skb, we already set a reference when we created the skb on the send side. On the send path, there are two increments of ref count on pid and credentials, once in scm_send and once in unix_scm_to_skb. Then there is a decrement of the reference counts in scm_destroy's call to scm_destroy_cred at the end of unix_dgram_sendmsg functions. One pair of increment and decrement of the reference counts can be removed so we only need to increment the ref counts once. By incorporating these changes, for hackbench running on a 4 socket NHM-EX machine with 40 cores, the execution of hackbench on 50 groups of 20 threads sped up by factor of 2. Hackbench command used for testing: ./hackbench 50 thread 2000 Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24sctp: Bundle HEAERTBEAT into ASCONF_ACKMichio Honda
With this patch a HEARTBEAT chunk is bundled into the ASCONF-ACK for ADD IP ADDRESS, confirming the new destination as quickly as possible. Signed-off-by: Michio Honda <micchie@sfc.wide.ad.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24NFC: Reserve tx head and tail roomSamuel Ortiz
We can have the NFC core layer allocating the tx head and tail room for the drivers and avoid 1 or more SKBs copy on write on the Tx path. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace make meshif mesh gateJavier Cardona
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh peering frame formatThomas Pedersen
This patch updates the mesh peering frames to the format specified in the recently ratified 802.11s standard. Several changes took place to make this happen: - Change RX path to handle new self-protected frames - Add new Peering management IE - Remove old Peer Link IE - Remove old plink_action field in ieee80211_mgmt header These changes by themselves would either break peering, or work by coincidence, so squash them all into this patch. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-22mac80211: fix suspend/resume races with unregister hwStanislaw Gruszka
Do not call ->suspend, ->resume methods after we unregister wiphy. Also delete sta_clanup timer after we finish wiphy unregister to avoid this: WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0() Hardware name: 6369CTO ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211] Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode] Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19 Call Trace: [<c0454cfd>] warn_slowpath_common+0x6d/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30 [<c05e05e5>] debug_print_object+0x85/0xa0 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211] [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180 [<c051175b>] kfree+0x8b/0x150 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211] [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211] [<c068d959>] device_release+0x19/0x80 [<c05d06ba>] kobject_release+0x7a/0x1c0 [<c07646a8>] ? rtnl_unlock+0x8/0x10 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211] [<c05d0640>] ? kobject_del+0x30/0x30 [<c05d1a6d>] kref_put+0x2d/0x60 [<c05d056d>] kobject_put+0x1d/0x50 [<c08015f4>] ? mutex_lock+0x14/0x40 [<c068d60f>] put_device+0xf/0x20 [<c069716a>] dpm_resume+0xca/0x160 [<c04912bd>] hibernation_snapshot+0xcd/0x260 [<c04903df>] ? freeze_processes+0x3f/0x90 [<c049151b>] hibernate+0xcb/0x1e0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c048fe60>] state_store+0xa0/0xb0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c05d0200>] kobj_attr_store+0x20/0x30 [<c0575ea4>] sysfs_write_file+0x94/0xf0 [<c051e26a>] vfs_write+0x9a/0x160 [<c0575e10>] ? sysfs_open_file+0x200/0x200 [<c051e3fd>] sys_write+0x3d/0x70 [<c080959f>] sysenter_do_call+0x12/0x28 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-17rps: Add flag to skb to indicate rxhash is based on L4 tupleTom Herbert
The l4_rxhash flag was added to the skb structure to indicate that the rxhash value was computed over the 4 tuple for the packet which includes the port information in the encapsulated transport packet. This is used by the stack to preserve the rxhash value in __skb_rx_tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13af_iucv: add HiperSockets transportUrsula Braun
The current transport mechanism for af_iucv is the z/VM offered communications facility IUCV. To provide equivalent support when running Linux in an LPAR, HiperSockets transport is added to the AF_IUCV address family. It requires explicit binding of an AF_IUCV socket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV is announced. An af_iucv specific transport header is defined preceding the skb data. A small protocol is implemented for connecting and for flow control/congestion management. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13iucv: introduce loadable iucv interfaceFrank Blaschka
This patch adds a symbol to dynamically load iucv functions. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-16 10:54:09 +0000