aboutsummaryrefslogtreecommitdiff
path: root/include/acpi
AgeCommit message (Collapse)Author
2011-03-15PM: Remove CONFIG_PM_OPSRafael J. Wysocki
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be replaced with CONFIG_PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-01-20Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: Update version to 20110112 ACPICA: Update all ACPICA copyrights and signons to 2011 ACPICA: Fix issues/fault with automatic "serialized" method support ACPICA: Debugger: Lock namespace for duration of a namespace dump ACPICA: Fix namespace race condition ACPICA: Fix memory leak in acpi_ev_asynch_execute_gpe_method().
2011-01-18ACPICA: Update version to 20110112Bob Moore
Version 20110112. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-18ACPICA: Update all ACPICA copyrights and signons to 2011Bob Moore
Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-14Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Report wakeup events before resuming devices PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events PCI: sysfs: Update ROM to include default owner write access x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available PCI/ACPI: Request _OSC control once for each root bridge (v3) PCI: enable pci=bfsort by default on future Dell systems PCI/PCIe: Clear Root PME Status bits early during system resume PCI: pci-stub: ignore zero-length id parameters x86/PCI: irq and pci_ids patch for Intel Patsburg PCI: Skip id checking if no id is passed PCI: fix __pci_device_probe kernel-doc warning PCI: make pci_restore_state return void PCI: Disable ASPM if BIOS asks us to PCI: Add mask bit definition for MSI-X table PCI: MSI: Move MSI-X entry definition to pci_regs.h Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the meantime been converted to not use legacy PCI power management, and thus no longer use pci_restore_state() at all (and that caused trivial conflicts with the "make pci_restore_state return void" patch)
2011-01-14PCI/ACPI: Request _OSC control once for each root bridge (v3)Rafael J. Wysocki
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits) ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework ACPI: fix resource check message ACPI / Battery: Update information on info notification and resume ACPI: Drop device flag wake_capable ACPI: Always check if _PRW is present before trying to evaluate it ACPI / PM: Check status of power resources under mutexes ACPI / PM: Rename acpi_power_off_device() ACPI / PM: Drop acpi_power_nocheck ACPI / PM: Drop acpi_bus_get_power() Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() ACPI / Fan: Rework the handling of power resources ACPI / PM: Register power resource devices as soon as they are needed ACPI / PM: Register acpi_power_driver early ACPI / PM: Add function for updating device power state consistently ACPI / PM: Add function for device power state initialization ACPI / PM: Introduce __acpi_bus_get_power() ACPI / PM: Introduce function for refcounting device power resources ACPI / PM: Add functions for manipulating lists of power resources ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes ACPICA: Update version to 20101209 ...
2011-01-12ACPI: Drop device flag wake_capableRafael J. Wysocki
The wake_capable ACPI device flag is not necessary, because it is only used in scan.c for recording the information that _PRW is present for the given device. That information is only used by acpi_add_single_object() to decide whether or not to call acpi_bus_get_wakeup_device_flags(), so the flag may be dropped if the _PRW check is moved to acpi_bus_get_wakeup_device_flags(). Moreover, acpi_bus_get_wakeup_device_flags() always returns 0, so it really should be void. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12Merge branch 'throttling' into releaseLen Brown
2011-01-12Merge branch 'wakeup-etc-rafael' into releaseLen Brown
2011-01-12Merge branch 'power-resource' into releaseLen Brown
2011-01-12ACPI / PM: Drop acpi_bus_get_power()Rafael J. Wysocki
There are no more users of acpi_bus_get_power(), so it can be dropped. Moreover, it should be dropped, because it modifies the device->power.state field of an ACPI device without updating the reference counters of the device's power resources, which is wrong. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / Fan: Rework the handling of power resourcesRafael J. Wysocki
Use the new function acpi_bus_update_power() for manipulating power resources used by ACPI fan devices, which allows them to be put into the right state during initialization and resume. Consequently, remove the flags.force_power_state field from struct acpi_device, which is not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPI / PM: Add function for updating device power state consistentlyRafael J. Wysocki
Add function acpi_bus_update_power() for reading the actual power state of an ACPI device and updating its device->power.state field in such a way that its power resources' reference counters will remain consistent with that field. For this purpose introduce __acpi_bus_set_power() setting the power state of an ACPI device without updating its device->power.state field and make acpi_bus_set_power() and acpi_bus_update_power() use it (acpi_bus_set_power() retains the current behavior for now). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPICA: Update version to 20101209Lin Ming
Version 20101209. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPICA: Global event handlerLin Ming
The global event handler is called whenever a general purpose or fixed ACPI event occurs. Also update Linux OSL to collect events counter with global event handler. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPICA: Implicit notify supportLin Ming
This feature provides an automatic device notification for wake devices when a wakeup GPE occurs and there is no corresponding GPE method or handler. Rather than ignoring such a GPE, an implicit AML Notify operation is performed on the parent device object. This feature is not part of the ACPI specification and is provided for Windows compatibility only. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPICA: New GPE handler callback definitionLin Ming
The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12ACPICA: Rename some function and variable namesLin Ming
Some function and variable names are renamed to be consistent with ACPICA code base. acpi_raw_enable_gpe -> acpi_ev_add_gpe_reference acpi_raw_disable_gpe -> acpi_ev_remove_gpe_reference acpi_gpe_can_wake -> acpi_setup_gpe_for_wake acpi_gpe_wakeup -> acpi_set_gpe_wake_mask acpi_update_gpes -> acpi_update_all_gpes acpi_all_gpes_initialized -> acpi_gbl_all_gpes_initialized acpi_handler_info -> acpi_gpe_handler_info ... Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-10ACPI: Reevaluate whether the T-state is supported or not after cpu is ↵Zhao Yakui
online/offline After one CPU is offlined, it is unnecessary to switch T-state for it. So it will be better that the throttling is disabled after the cpu is offline. At the same time after one cpu is online, we should check whether the T-state is supported and then set the corresponding T-state flag. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07ACPI / PM: Drop special ACPI wakeup flagsRafael J. Wysocki
Drop special ACPI wakeup flags, wakeup.state.enabled and wakeup.flags.always_enabled, that aren't necessary any more after we've started to use standard device wakeup flags for handling ACPI wakeup devices. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-11ACPI: video: fix build for CONFIG_ACPI=nChris Wilson
In file included from drivers/gpu/drm/i915/intel_opregion.c:30: include/acpi/video.h:22: warning: ‘struct acpi_device’ declared inside parameter list ... include/acpi/video.h:24: error: ‘ENODEV’ undeclared (first use in this function) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-26Merge branch 'misc' into releaseLen Brown
2010-10-25Merge branch 'gpe-defer' into releaseLen Brown
2010-10-25Merge branch 'acpi_pm_device_sleep_state' into releaseLen Brown
2010-10-25Merge branches 'bugzilla-15807', 'bugzilla-15979-v2' and 'bugzilla-19162' ↵Len Brown
into release
2010-10-25Merge branch 'acpica' into releaseLen Brown
Conflicts: drivers/acpi/acpica/aclocal.h Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19ACPI: remove dead codeStephen Hemminger
Found by running make namespacecheck on linux-next Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-17ACPICA: Update version to 20101013Bob Moore
Version 20101013. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-15ACPI / PM: Fix problems with acpi_pm_device_sleep_state()Rafael J. Wysocki
There is a number of problems with acpi_pm_device_sleep_state() now. First, if _S0W is not defined, it prevents devices from being put into D3 by PCI runtime PM, which shouldn't happen. Second, it shouldn't use adev->wakeup.state.enabled, because if it's set, it only means that either the device is permanently enabled to wake up the system, or that it has been enabled to do that through /proc/acpi/wakeup. Finally, it should be compiled if CONFIG_PM_SLEEP is not set, so that PCI runtime PM works correctly in that case. Fix these problems. Reported-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPI/PNP: A HID value of an object never changes -> make it constThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Update version to 20100915Bob Moore
Version 20100915. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Make acpi_gbl_system_awake_and_running publically availableBob Moore
Added extern for this boolean in acpixf.h. Some hosts utilize this value during suspend/restore operations. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Update math module; no functional changeBob Moore
Move the 64-bit overlay structures to the utmath module since they are used nowhere else. Update module comment. ACPICA BZ 829. http://www.acpica.org/bugzilla/show_bug.cgi?id=829 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Make acpi_thread_id no longer configurable, always u64Lin Ming
Change definition of acpi_thread_id to always be a u64. This simplifies the code, especially any printf output. u64 is the only common data type for all thread_id types across all operating systems. We now force the OSL to cast the native thread_id type to u64 before returning the value to ACPICA (via acpi_os_get_thread_id). Signed-off-by: Lin Ming <ming.m.lin@intel.com Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Add ACPI_INLINE configuration parameterLin Ming
The C inline keyword is not standardized, ACPI_INLINE allows this to be configured on a per-compiler basis. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Obsolete the acpi_os_derive_pci_id OSL interfaceBob Moore
This function is not OS-dependent and has been replaced by acpi_hw_derive_pci_id, which is now in the ACPICA core code. Local implementations of acpi_os_derive_pci_id are no longer necessary and are removed. ACPICA BZ 857. http://www.acpica.org/bugzilla/show_bug.cgi?id=857 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Update version to 20100806Bob Moore
Version 20100806. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA/ACPI: Add new host interfaces for _OSI supportLin Ming
Adds install/remove interfaces so that the host can dynamically alter the global _OSI table. Also adds support for _OSI handlers. Additional support: new debugger command (osi), and test support in the acpiexec utility. Adds new file, utilities/utosi.c. ACPICA bugzilla 836. The Linux OSL _OSI code is also changed. acpi_osi_setup can't call acpi_install/remove_interface because ACPICA is not initialized yet at this early time. So we just save the osi string in acpi_osi_setup and will handle it later in a new function acpi_osi_setup_late. http://www.acpica.org/bugzilla/show_bug.cgi?id=836 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01ACPICA: Fix acpi_os_read_pci_configuration prototypeBob Moore
Prototype in acpiosxf.h had the output value pointer as a (u32 *). Should be a (u64 *). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28ACPI: Fix typosLucas De Marchi
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-24ACPI / ACPICA: Defer enabling of runtime GPEs (v3)Rafael J. Wysocki
The current ACPI GPEs initialization code has a problem that it enables some GPEs pointed to by device _PRW methods, generally intended for signaling wakeup events (system or device wakeup). These GPEs are then almost immediately disabled by the ACPI namespace scanning code with the help of acpi_gpe_can_wake(), but it would be better not to enable them at all until really necessary. Modify the initialization of GPEs so that the ones that have associated _Lxx or _Exx methods and are not pointed to by any _PRW methods will be enabled after the namespace scan is complete. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: bus speed strings should be const PCI hotplug: Fix build with CONFIG_ACPI unset PCI: PCIe: Remove the port driver module exit routine PCI: PCIe: Move PCIe PME code to the pcie directory PCI: PCIe: Disable PCIe port services during port initialization PCI: PCIe: Ask BIOS for control of all native services at once ACPI/PCI: Negotiate _OSC control bits before requesting them ACPI/PCI: Do not preserve _OSC control bits returned by a query ACPI/PCI: Make acpi_pci_query_osc() return control bits ACPI/PCI: Reorder checks in acpi_pci_osc_control_set() PCI: PCIe: Introduce commad line switch for disabling port services PCI: PCIe AER: Introduce pci_aer_available() x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs
2010-08-24ACPI/PCI: Do not preserve _OSC control bits returned by a query Rafael J. Wysocki
There is the assumption in acpi_pci_osc_control_set() that it is always sufficient to compare the mask of _OSC control bits to be requested with the result of an _OSC query where all of the known control bits have been checked. However, in general, that need not be the case. For example, if an _OSC feature A depends on an _OSC feature B and control of A, B plus another _OSC feature C is requested simultaneously, the BIOS may return A, B, C, while it would only return C if A and C were requested without B. That may result in passing a wrong mask of _OSC control bits to an _OSC control request, in which case the BIOS may only grant control of a subset of the requested features. Moreover, acpi_pci_run_osc() will return error code if that happens and the caller of acpi_pci_osc_control_set() will not know that it's been granted control of some _OSC features. Consequently, the system will generally not work as expected. Apart from this acpi_pci_osc_control_set() always uses the mask of _OSC control bits returned by the very first invocation of acpi_pci_query_osc(), but that is done with the second argument equal to OSC_PCI_SEGMENT_GROUPS_SUPPORT which generally happens to affect the returned _OSC control bits. For these reasons, make acpi_pci_osc_control_set() always check if control of the requested _OSC features will be granted before making the final control request. As a result, the osc_control_qry and osc_queried members of struct acpi_pci_root are not necessary any more, so drop them and remove the remaining code referring to them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-15Merge branch 'linus' into releaseLen Brown
Conflicts: drivers/acpi/debug.c Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI processor: remove deprecated ACPI procfs I/FZhang Rui
Remove deprecated ACPI processor procfs I/F, including: /proc/acpi/processor/CPUX/power /proc/acpi/processor/CPUX/limit /proc/acpi/processor/CPUX/info /proc/acpi/processor/CPUX/throttling still exists, as we don't have sysfs I/F available for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15Merge branch 'acpica-gpe' into releaseLen Brown
2010-08-14ACPI: introduce module parameter acpi.aml_debug_outputZhang Rui
Introduce module parameter acpi.aml_debug_output. With acpi.aml_debug_output set, we can get AML debug object output (Store (AAA, Debug)), even with CONFIG_ACPI_DEBUG cleared. Together with the runtime custom method mechanism, we can debug AML code problems without rebuilding the kernel. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>