aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2013-04-02Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfix from J Bruce Fields: "An xdr decoding error--thanks, Toralf Förster, and Trinity!" * 'for-3.9' of git://linux-nfs.org/~bfields/linux: nfsd4: reject "negative" acl lengths
2013-04-01loop: prevent bdev freeing while device in useAnatol Pomozov
struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We've had a busy two weeks of bug fixing. The biggest patches in here are some long standing early-enospc problems (Josef) and a very old race where compression and mmap combine forces to lose writes (me). I'm fairly sure the mmap bug goes all the way back to the introduction of the compression code, which is proof that fsx doesn't trigger every possible mmap corner after all. I'm sure you'll notice one of these is from this morning, it's a small and isolated use-after-free fix in our scrub error reporting. I double checked it here." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't drop path when printing out tree errors in scrub Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holes Btrfs: fix race between mmap writes and compression Btrfs: fix memory leak in btrfs_create_tree() Btrfs: fix locking on ROOT_REPLACE operations in tree mod log Btrfs: fix missing qgroup reservation before fallocating Btrfs: handle a bogus chunk tree nicely Btrfs: update to use fs_state bit
2013-03-29Btrfs: don't drop path when printing out tree errors in scrubJosef Bacik
A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-28Merge tag 'driver-core-3.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull sysfs fixes from Greg Kroah-Hartman: "Here are two fixes for sysfs that resolve issues that have been found by the Trinity fuzz tool, causing oopses in sysfs. They both have been in linux-next for a while to ensure that they do not cause any other problems." * tag 'driver-core-3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: handle failure path correctly for readdir() sysfs: fix race between readdir and lseek
2013-03-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull userns fixes from Eric W Biederman: "The bulk of the changes are fixing the worst consequences of the user namespace design oversight in not considering what happens when one namespace starts off as a clone of another namespace, as happens with the mount namespace. The rest of the changes are just plain bug fixes. Many thanks to Andy Lutomirski for pointing out many of these issues." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: userns: Restrict when proc and sysfs can be mounted ipc: Restrict mounting the mqueue filesystem vfs: Carefully propogate mounts across user namespaces vfs: Add a mount flag to lock read only bind mounts userns: Don't allow creation if the user is chrooted yama: Better permission check for ptraceme pid: Handle the exit of a multi-threaded init. scm: Require CAP_SYS_ADMIN over the current pidns to spoof pids.
2013-03-28Btrfs: fix wrong return value of btrfs_lookup_csum()Miao Xie
If we don't find the expected csum item, but find a csum item which is adjacent to the specified extent, we should return -EFBIG, or we should return -ENOENT. But btrfs_lookup_csum() return -EFBIG even the csum item is not adjacent to the specified extent. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: fix wrong reservation of csumsMiao Xie
We reserve the space for csums only when we write data into a file, in the other cases, such as tree log, log replay, we don't do reservation, so we can use the reservation of the transaction handle just for the former. And for the latter, we should use the tree's own reservation. But the function - btrfs_csum_file_blocks() didn't differentiate between these two types of the cases, fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: fix double free in the btrfs_qgroup_account_ref()Wang Shilong
The function btrfs_find_all_roots is responsible to allocate memory for 'roots' and free it if errors happen,so the caller should not free it again since the work has been done. Besides,'tmp' is allocated after the function btrfs_find_all_roots, so we can return directly if btrfs_find_all_roots() fails. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: limit the global reserve to 512mbJosef Bacik
A user reported a problem where he was getting early ENOSPC with hundreds of gigs of free data space and 6 gigs of free metadata space. This is because the global block reserve was taking up the entire free metadata space. This is ridiculous, we have infrastructure in place to throttle if we start using too much of the global reserve, so instead of letting it get this huge just limit it to 512mb so that users can still get work done. This allowed the user to complete his rsync without issues. Thanks Cc: stable@vger.kernel.org Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: hold the ordered operations mutex when waiting on ordered extentsJosef Bacik
We need to hold the ordered_operations mutex while waiting on ordered extents since we splice and run the ordered extents list. We need to make sure anybody else who wants to wait on ordered extents does actually wait for them to be completed. This will keep us from bailing out of flushing in case somebody is already waiting on ordered extents to complete. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: fix space accounting for unlink and renameJosef Bacik
We are way over-reserving for unlink and rename. Rename is just some random huge number and unlink accounts for tree log operations that don't actually happen during unlink, not to mention the tree log doesn't take from the trans block rsv anyway so it's completely useless. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: fix space leak when we fail to reserve metadata spaceJosef Bacik
Dave reported a warning when running xfstest 275. We have been leaking delalloc metadata space when our reservations fail. This is because we were improperly calculating how much space to free for our checksum reservations. The problem is we would sometimes free up space that had already been freed in another thread and we would end up with negative usage for the delalloc space. This patch fixes the problem by calculating how much space the other threads would have already freed, and then calculate how much space we need to free had we not done the reservation at all, and then freeing any excess space. This makes xfstests 275 no longer have leaked space. Thanks Cc: stable@vger.kernel.org Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-28Btrfs: fix EIO from btrfs send in is_extent_unchanged for punched holesJan Schmidt
When you take a snapshot, punch a hole where there has been data, then take another snapshot and try to send an incremental stream, btrfs send would give you EIO. That is because is_extent_unchanged had no support for holes being punched. With this patch, instead of returning EIO we just return 0 (== the extent is not unchanged) and we're good. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Cc: Alexander Block <ablock84@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-27vfs/splice: Fix missed checks in new __kernel_write() helperAl Viro
Commit 06ae43f34bcc ("Don't bother with redoing rw_verify_area() from default_file_splice_from()") lost the checks to test existence of the write/aio_write methods. My apologies ;-/ Eventually, we want that in fs/splice.c side of things (no point repeating it for every buffer, after all), but for now this is the obvious minimal fix. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-27userns: Restrict when proc and sysfs can be mountedEric W. Biederman
Only allow unprivileged mounts of proc and sysfs if they are already mounted when the user namespace is created. proc and sysfs are interesting because they have content that is per namespace, and so fresh mounts are needed when new namespaces are created while at the same time proc and sysfs have content that is shared between every instance. Respect the policy of who may see the shared content of proc and sysfs by only allowing new mounts if there was an existing mount at the time the user namespace was created. In practice there are only two interesting cases: proc and sysfs are mounted at their usual places, proc and sysfs are not mounted at all (some form of mount namespace jail). Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27vfs: Carefully propogate mounts across user namespacesEric W. Biederman
As a matter of policy MNT_READONLY should not be changable if the original mounter had more privileges than creator of the mount namespace. Add the flag CL_UNPRIVILEGED to note when we are copying a mount from a mount namespace that requires more privileges to a mount namespace that requires fewer privileges. When the CL_UNPRIVILEGED flag is set cause clone_mnt to set MNT_NO_REMOUNT if any of the mnt flags that should never be changed are set. This protects both mount propagation and the initial creation of a less privileged mount namespace. Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27vfs: Add a mount flag to lock read only bind mountsEric W. Biederman
When a read-only bind mount is copied from mount namespace in a higher privileged user namespace to a mount namespace in a lesser privileged user namespace, it should not be possible to remove the the read-only restriction. Add a MNT_LOCK_READONLY mount flag to indicate that a mount must remain read-only. CC: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-27userns: Don't allow creation if the user is chrootedEric W. Biederman
Guarantee that the policy of which files may be access that is established by setting the root directory will not be violated by user namespaces by verifying that the root directory points to the root of the mount namespace at the time of user namespace creation. Changing the root is a privileged operation, and as a matter of policy it serves to limit unprivileged processes to files below the current root directory. For reasons of simplicity and comprehensibility the privilege to change the root directory is gated solely on the CAP_SYS_CHROOT capability in the user namespace. Therefore when creating a user namespace we must ensure that the policy of which files may be access can not be violated by changing the root directory. Anyone who runs a processes in a chroot and would like to use user namespace can setup the same view of filesystems with a mount namespace instead. With this result that this is not a practical limitation for using user namespaces. Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "stable fodder; assorted deadlock fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vt: synchronize_rcu() under spinlock is not nice... Nest rename_lock inside vfsmount_lock Don't bother with redoing rw_verify_area() from default_file_splice_from()
2013-03-26Nest rename_lock inside vfsmount_lockAl Viro
... lest we get livelocks between path_is_under() and d_path() and friends. The thing is, wrt fairness lglocks are more similar to rwsems than to rwlocks; it is possible to have thread B spin on attempt to take lock shared while thread A is already holding it shared, if B is on lower-numbered CPU than A and there's a thread C spinning on attempt to take the same lock exclusive. As the result, we need consistent ordering between vfsmount_lock (lglock) and rename_lock (seq_lock), even though everything that takes both is going to take vfsmount_lock only shared. Spotted-by: Brad Spengler <spender@grsecurity.net> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26Merge tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 idmapper regression - Fix an Oops in the pNFS blocks client - Fix up various issues with pNFS layoutcommit - Ensure correct read ordering of variables in rpc_wake_up_task_queue_locked * tag 'nfs-for-3.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked NFSv4.1: Add a helper pnfs_commit_and_return_layout NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn NFSv4.1: Fix a race in pNFS layoutcommit pnfs-block: removing DM device maybe cause oops when call dev_remove NFSv4: Fix the string length returned by the idmapper
2013-03-26nfsd4: reject "negative" acl lengthsJ. Bruce Fields
Since we only enforce an upper bound, not a lower bound, a "negative" length can get through here. The symptom seen was a warning when we attempt to a kmalloc with an excessive size. Reported-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-26Btrfs: fix race between mmap writes and compressionChris Mason
Btrfs uses page_mkwrite to ensure stable pages during crc calculations and mmap workloads. We call clear_page_dirty_for_io before we do any crcs, and this forces any application with the file mapped to wait for the crc to finish before it is allowed to change the file. With compression on, the clear_page_dirty_for_io step is happening after we've compressed the pages. This means the applications might be changing the pages while we are compressing them, and some of those modifications might not hit the disk. This commit adds the clear_page_dirty_for_io before compression starts and makes sure to redirty the page if we have to fallback to uncompressed IO as well. Signed-off-by: Chris Mason <chris.mason@fusionio.com> Reported-by: Alexandre Oliva <oliva@gnu.org> cc: stable@vger.kernel.org
2013-03-25Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from J Bruce Fields: "Fixes for a couple mistakes in the new DRC code. And thanks to Kent Overstreet for noticing we've been sync'ing the wrong range on stable writes since 3.8." * 'for-3.9' of git://linux-nfs.org/~bfields/linux: nfsd: fix bad offset use nfsd: fix startup order in nfsd_reply_cache_init nfsd: only unhash DRC entries that are in the hashtable
2013-03-22nfsd: fix bad offset useKent Overstreet
vfs_writev() updates the offset argument - but the code then passes the offset to vfs_fsync_range(). Since offset now points to the offset after what was just written, this is probably not what was intended Introduced by face15025ffdf664de95e86ae831544154d26c9c "nfsd: use vfs_fsync_range(), not O_SYNC, for stable writes". Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: stable@vger.kernel.org Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-22vfs,proc: guarantee unique inodes in /procLinus Torvalds
Dave Jones found another /proc issue with his Trinity tool: thanks to the namespace model, we can have multiple /proc dentries that point to the same inode, aliasing directories in /proc/<pid>/net/ for example. This ends up being a total disaster, because it acts like hardlinked directories, and causes locking problems. We rely on the topological sort of the inodes pointed to by dentries, and if we have aliased directories, that odering becomes unreliable. In short: don't do this. Multiple dentries with the same (directory) inode is just a bad idea, and the namespace code should never have exposed things this way. But we're kind of stuck with it. This solves things by just always allocating a new inode during /proc dentry lookup, instead of using "iget_locked()" to look up existing inodes by superblock and number. That actually simplies the code a bit, at the cost of potentially doing more inode [de]allocations. That said, the inode lookup wasn't free either (and did a lot of locking of inodes), so it is probably not that noticeable. We could easily keep the old lookup model for non-directory entries, but rather than try to be excessively clever this just implements the minimal and simplest workaround for the problem. Reported-and-tested-by: Dave Jones <davej@redhat.com> Analyzed-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-21Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French: "Three small CIFS Fixes (the most important of the three fixes a recent problem authenticating to Windows 8 using cifs rather than SMB2)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: ignore everything in SPNEGO blob after mechTypes cifs: delay super block destruction until all cifsFileInfo objects are gone cifs: map NT_STATUS_SHARING_VIOLATION to EBUSY instead of ETXTBSY
2013-03-21Merge tag 'ext4_for_linue' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix a number of regression and other bugs in ext4, most of which were relatively obscure cornercases or races that were found using regression tests." * tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits) ext4: fix data=journal fast mount/umount hang ext4: fix ext4_evict_inode() racing against workqueue processing code ext4: fix memory leakage in mext_check_coverage ext4: use s_extent_max_zeroout_kb value as number of kb ext4: use atomic64_t for the per-flexbg free_clusters count jbd2: fix use after free in jbd2_journal_dirty_metadata() ext4: reserve metadata block for every delayed write ext4: update reserved space after the 'correction' ext4: do not use yield() ext4: remove unused variable in ext4_free_blocks() ext4: fix WARN_ON from ext4_releasepage() ext4: fix the wrong number of the allocated blocks in ext4_split_extent() ext4: update extent status tree after an extent is zeroed out ext4: fix wrong m_len value after unwritten extent conversion ext4: add self-testing infrastructure to do a sanity check ext4: avoid a potential overflow in ext4_es_can_be_merged() ext4: invalidate extent status tree during extent migration ext4: remove unnecessary wait for extent conversion in ext4_fallocate() ext4: add warning to ext4_convert_unwritten_extents_endio ext4: disable merging of uninitialized extents ...
2013-03-21Btrfs: fix memory leak in btrfs_create_tree()Tsutomu Itoh
We should free leaf and root before returning from the error handling code. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-21Btrfs: fix locking on ROOT_REPLACE operations in tree mod logJan Schmidt
To resolve backrefs, ROOT_REPLACE operations in the tree mod log are required to be tied to at least one KEY_REMOVE_WHILE_FREEING operation. Therefore, those operations must be enclosed by tree_mod_log_write_lock() and tree_mod_log_write_unlock() calls. Those calls are private to the tree_mod_log_* functions, which means that removal of the elements of an old root node must be logged from tree_mod_log_insert_root. This partly reverts and corrects commit ba1bfbd5 (Btrfs: fix a tree mod logging issue for root replacement operations). This fixes the brand-new version of xfstest 276 as of commit cfe73f71. Cc: stable@vger.kernel.org Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-21Btrfs: fix missing qgroup reservation before fallocatingWang Shilong
Steps to reproduce: mkfs.btrfs <disk> mount <disk> <mnt> btrfs quota enable <mnt> btrfs sub create <mnt>/subv btrfs qgroup limit 10M <mnt>/subv fallocate --length 20M <mnt>/subv/data For the above example, fallocating will return successfully which is not expected, we try to fix it by doing qgroup reservation before fallocating. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-21Btrfs: handle a bogus chunk tree nicelyJosef Bacik
If you restore a btrfs-image file system and try to mount that file system we'll panic. That's because btrfs-image restores and just makes one big chunk to envelope the whole disk, since they are really only meant to be messed with by our btrfs-progs. So fix up btrfs_rmap_block and the callers of it for mount so that we no longer panic but instead just return an error and fail to mount. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-21Btrfs: update to use fs_state bitLiu Bo
Now that we use bit operation to check fs_state, update btrfs_free_fs_root()'s checker, otherwise we get back to memory leak case. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-21cifs: ignore everything in SPNEGO blob after mechTypesJeff Layton
We've had several reports of people attempting to mount Windows 8 shares and getting failures with a return code of -EINVAL. The default sec= mode changed recently to sec=ntlmssp. With that, we expect and parse a SPNEGO blob from the server in the NEGOTIATE reply. The current decode_negTokenInit function first parses all of the mechTypes and then tries to parse the rest of the negTokenInit reply. The parser however currently expects a mechListMIC or nothing to follow the mechTypes, but Windows 8 puts a mechToken field there instead to carry some info for the new NegoEx stuff. In practice, we don't do anything with the fields after the mechTypes anyway so I don't see any real benefit in continuing to parse them. This patch just has the kernel ignore the fields after the mechTypes. We'll probably need to reinstate some of this if we ever want to support NegoEx. Reported-by: Jason Burgess <jason@jacknife2.dns2go.com> Reported-by: Yan Li <elliot.li.tech@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-21Don't bother with redoing rw_verify_area() from default_file_splice_from()Al Viro
default_file_splice_from() ends up calling vfs_write() (via very convoluted callchain). It's an overkill, since we already have done rw_verify_area() in the caller by the time we call vfs_write() we are under set_fs(KERNEL_DS), so access_ok() is also pointless. Add a new helper (__kernel_write()), use it instead of kernel_write() in there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-21NFSv4.1: Add a helper pnfs_commit_and_return_layoutTrond Myklebust
In order to be able to safely return the layout in nfs4_proc_setattr, we need to block new uses of the layout, wait for all outstanding users of the layout to complete, commit the layout and then return it. This patch adds a helper in order to do all this safely. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Boaz Harrosh <bharrosh@panasas.com>
2013-03-21NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturnTrond Myklebust
Note that clearing NFS_INO_LAYOUTCOMMIT is tricky, since it requires you to also clear the NFS_LSEG_LAYOUTCOMMIT bits from the layout segments. The only two sites that need to do this are the ones that call pnfs_return_layout() without first doing a layout commit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Benny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org
2013-03-21NFSv4.1: Fix a race in pNFS layoutcommitTrond Myklebust
We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations where the two are out of sync. The first half of the problem is to ensure that pnfs_layoutcommit_inode clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg. We still need to keep the reference to those segments until the RPC call is finished, so in order to make it clear _where_ those references come from, we add a helper pnfs_list_write_lseg_done() that cleans up after pnfs_list_write_lseg. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Benny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org
2013-03-21pnfs-block: removing DM device maybe cause oops when call dev_removefanchaoting
when pnfs block using device mapper,if umounting later,it maybe cause oops. we apply "1 + sizeof(bl_umount_request)" memory for msg->data, the memory maybe overflow when we do "memcpy(&dataptr [sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))", because the size of bl_msg is more than 1 byte. Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-03-20sysfs: handle failure path correctly for readdir()Ming Lei
In case of 'if (filp->f_pos == 0 or 1)' of sysfs_readdir(), the failure from filldir() isn't handled, and the reference counter of the sysfs_dirent object pointed by filp->private_data will be released without clearing filp->private_data, so use after free bug will be triggered later. This patch returns immeadiately under the situation for fixing the bug, and it is reasonable to return from readdir() when filldir() fails. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20sysfs: fix race between readdir and lseekMing Lei
While readdir() is running, lseek() may set filp->f_pos as zero, then may leave filp->private_data pointing to one sysfs_dirent object without holding its reference counter, so the sysfs_dirent object may be used after free in next readdir(). This patch holds inode->i_mutex to avoid the problem since the lock is always held in readdir path. Reported-by: Dave Jones <davej@redhat.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20NFSv4: Fix the string length returned by the idmapperTrond Myklebust
Functions like nfs_map_uid_to_name() and nfs_map_gid_to_group() are expected to return a string without any terminating NUL character. Regression introduced by commit 57e62324e469e092ecc6c94a7a86fe4bd6ac5172 (NFS: Store the legacy idmapper result in the keyring). Reported-by: Dave Chiluk <dave.chiluk@canonical.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: stable@vger.kernel.org [>=3.4]
2013-03-20ext4: fix data=journal fast mount/umount hangTheodore Ts'o
In data=journal mode, if we unmount the file system before a transaction has a chance to complete, when the journal inode is being evicted, we can end up calling into jbd2_log_wait_commit() for the last transaction, after the journalling machinery has been shut down. Arguably we should adjust ext4_should_journal_data() to return FALSE for the journal inode, but the only place it matters is ext4_evict_inode(), and so to save a bit of CPU time, and to make the patch much more obviously correct by inspection(tm), we'll fix it by explicitly not trying to waiting for a journal commit when we are evicting the journal inode, since it's guaranteed to never succeed in this case. This can be easily replicated via: mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb ------------[ cut here ]------------ WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd() Hardware name: Bochs JBD2: bad log_start_commit: 3005630206 3005630206 0 0 Modules linked in: Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020 Call Trace: [<c015c0ef>] warn_slowpath_common+0x68/0x7d [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd [<c015c177>] warn_slowpath_fmt+0x2b/0x2f [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd [<c02b8075>] jbd2_log_start_commit+0x24/0x34 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3 [<c021f0ec>] evict+0x94/0x135 [<c021f9aa>] iput+0x10a/0x110 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce [<c0175284>] ? bit_waitqueue+0x50/0x50 [<c028d23f>] ext4_put_super+0x52/0x294 [<c020efe3>] generic_shutdown_super+0x48/0xb4 [<c020f071>] kill_block_super+0x22/0x60 [<c020f3e0>] deactivate_locked_super+0x22/0x49 [<c020f5d6>] deactivate_super+0x30/0x33 [<c0222795>] mntput_no_expire+0x107/0x10c [<c02233a7>] sys_umount+0x2cf/0x2e0 [<c02233ca>] sys_oldumount+0x12/0x14 [<c08096b8>] syscall_call+0x7/0xb ---[ end trace 6a954cc790501c1f ]--- jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2013-03-20ext4: fix ext4_evict_inode() racing against workqueue processing codeTheodore Ts'o
Commit 84c17543ab56 (ext4: move work from io_end to inode) triggered a regression when running xfstest #270 when the file system is mounted with dioread_nolock. The problem is that after ext4_evict_inode() calls ext4_ioend_wait(), this guarantees that last io_end structure has been freed, but it does not guarantee that the workqueue structure, which was moved into the inode by commit 84c17543ab56, is actually finished. Once ext4_flush_completed_IO() calls ext4_free_io_end() on CPU #1, this will allow ext4_ioend_wait() to return on CPU #2, at which point the evict_inode() codepath can race against the workqueue code on CPU #1 accessing EXT4_I(inode)->i_unwritten_work to find the next item of work to do. Fix this by calling cancel_work_sync() in ext4_ioend_wait(), which will be renamed ext4_ioend_shutdown(), since it is only used by ext4_evict_inode(). Also, move the call to ext4_ioend_shutdown() until after truncate_inode_pages() and filemap_write_and_wait() are called, to make sure all dirty pages have been written back and flushed from the page cache first. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e *pdpt = 0000000030bc3001 *pde = 0000000000000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: Pid: 6, comm: kworker/u:0 Not tainted 3.8.0-rc3-00013-g84c1754-dirty #91 Bochs Bochs EIP: 0060:[<c01dda6a>] EFLAGS: 00010046 CPU: 0 EIP is at cwq_activate_delayed_work+0x3b/0x7e EAX: 00000000 EBX: 00000000 ECX: f505fe54 EDX: 00000000 ESI: ed5b697c EDI: 00000006 EBP: f64b7e8c ESP: f64b7e84 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 30bc2000 CR4: 000006f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process kworker/u:0 (pid: 6, ti=f64b6000 task=f64b4160 task.ti=f64b6000) Stack: f505fe00 00000006 f64b7e9c c01de3d7 f6435540 00000003 f64b7efc c01def1d f6435540 00000002 00000000 0000008a c16d0808 c040a10b c16d07d8 c16d08b0 f505fe00 c16d0780 00000000 00000000 ee153df4 c1ce4a30 c17d0e30 00000000 Call Trace: [<c01de3d7>] cwq_dec_nr_in_flight+0x71/0xfb [<c01def1d>] process_one_work+0x5d8/0x637 [<c040a10b>] ? ext4_end_bio+0x300/0x300 [<c01e3105>] worker_thread+0x249/0x3ef [<c01ea317>] kthread+0xd8/0xeb [<c01e2ebc>] ? manage_workers+0x4bb/0x4bb [<c023a370>] ? trace_hardirqs_on+0x27/0x37 [<c0f1b4b7>] ret_from_kernel_thread+0x1b/0x28 [<c01ea23f>] ? __init_kthread_worker+0x71/0x71 Code: 01 83 15 ac ff 6c c1 00 31 db 89 c6 8b 00 a8 04 74 12 89 c3 30 db 83 05 b0 ff 6c c1 01 83 15 b4 ff 6c c1 00 89 f0 e8 42 ff ff ff <8b> 13 89 f0 83 05 b8 ff 6c c1 6c c1 00 31 c9 83 EIP: [<c01dda6a>] cwq_activate_delayed_work+0x3b/0x7e SS:ESP 0068:f64b7e84 CR2: 0000000000000000 ---[ end trace a1923229da53d8a4 ]--- Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz>
2013-03-19Merge tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull XFS fixes from Ben Myers: - Fix for a potential infinite loop which was introduced in commit 4d559a3bcb73 ("xfs: limit speculative prealloc near ENOSPC thresholds") - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from commit a1e16c26660b ("xfs: limit speculative prealloc size on sparse files") - Fix for a failed buffer readahead causing subsequent callers to fail incorrectly * tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs: xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type xfs: fix potential infinite loop in xfs_iomap_prealloc_size()
2013-03-18nfsd: fix startup order in nfsd_reply_cache_initJeff Layton
If we end up doing "goto out_nomem" in this function, we'll call nfsd_reply_cache_shutdown. That will attempt to walk the LRU list and free entries, but that list may not be initialized yet if the server is starting up for the first time. It's also possible for the shrinker to kick in before we've initialized the LRU list. Rearrange the initialization so that the LRU list_head and cache size are initialized before doing any of the allocations that might fail. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-18nfsd: only unhash DRC entries that are in the hashtableJeff Layton
It's not safe to call hlist_del() on a newly initialized hlist_node. That leads to a NULL pointer dereference. Only do that if the entry is hashed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-18xfs: ensure we capture IO errors correctlyDave Chinner
Failed buffer readahead can leave the buffer in the cache marked with an error. Most callers that then issue a subsequent read on the buffer do not zero the b_error field out, and so we may incorectly detect an error during IO completion due to the stale error value left on the buffer. Avoid this problem by zeroing the error before IO submission. This ensures that the only IO errors that are detected those captured from are those captured from bio submission or completion. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit c163f9a1760229a95d04e37b332de7d5c1c225cd)
2013-03-18xfs: fix xfs_iomap_eof_prealloc_initial_size typeMark Tinguely
Fix the return type of xfs_iomap_eof_prealloc_initial_size() to xfs_fsblock_t to reflect the fact that the return value may be an unsigned 64 bits if XFS_BIG_BLKNOS is defined. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e8108cedb1c5d1dc359690d18ca997e97a0061d2)