| Age | Commit message (Collapse) | Author |
|---|
|
The following implementation of ppoll() and pselect() system calls
depends on the architecture providing a TIF_RESTORE_SIGMASK flag in the
thread_info.
These system calls have to change the signal mask during their
operation, and signal handlers must be invoked using the new, temporary
signal mask. The old signal mask must be restored either upon successful
exit from the system call, or upon returning from the invoked signal
handler if the system call is interrupted. We can't simply restore the
original signal mask and return to userspace, since the restored signal
mask may actually block the signal which interrupted the system call.
The TIF_RESTORE_SIGMASK flag deals with this by causing the syscall exit
path to trap into do_signal() just as TIF_SIGPENDING does, and by
causing do_signal() to use the saved signal mask instead of the current
signal mask when setting up the stack frame for the signal handler -- or
by causing do_signal() to simply restore the saved signal mask in the
case where there is no handler to be invoked.
The first patch implements the sys_pselect() and sys_ppoll() system
calls, which are present only if TIF_RESTORE_SIGMASK is defined. That
#ifdef should go away in time when all architectures have implemented
it. The second patch implements TIF_RESTORE_SIGMASK for the PowerPC
kernel (in the -mm tree), and the third patch then removes the
arch-specific implementations of sys_rt_sigsuspend() and replaces them
with generic versions using the same trick.
The fourth and fifth patches, provided by David Howells, implement
TIF_RESTORE_SIGMASK for FR-V and i386 respectively, and the sixth patch
adds the syscalls to the i386 syscall table.
This patch:
Add the pselect() and ppoll() system calls, providing core routines usable by
the original select() and poll() system calls and also the new calls (with
their semantics w.r.t timeouts).
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Here is a series of patches which introduce in total 13 new system calls
which take a file descriptor/filename pair instead of a single file
name. These functions, openat etc, have been discussed on numerous
occasions. They are needed to implement race-free filesystem traversal,
they are necessary to implement a virtual per-thread current working
directory (think multi-threaded backup software), etc.
We have in glibc today implementations of the interfaces which use the
/proc/self/fd magic. But this code is rather expensive. Here are some
results (similar to what Jim Meyering posted before).
The test creates a deep directory hierarchy on a tmpfs filesystem. Then
rm -fr is used to remove all directories. Without syscall support I get
this:
real 0m31.921s
user 0m0.688s
sys 0m31.234s
With syscall support the results are much better:
real 0m20.699s
user 0m0.536s
sys 0m20.149s
The interfaces are for obvious reasons currently not much used. But they'll
be used. coreutils (and Jeff's posixutils) are already using them.
Furthermore, code like ftw/fts in libc (maybe even glob) will also start using
them. I expect a patch to make follow soon. Every program which is walking
the filesystem tree will benefit.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
find_exported_dentry contains two duplicate loops to find an alias that the
acceptable callback likes. Split this out to a new helper and switch from
list_for_each to list_for_each_entry to make it more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
A recent patch which checked the return status of vfs_getattr in nfsd,
completely missed the nfsproc.c (NFSv2) part. Here is it.
This patch moved the call to vfs_getattr from the xdr encoding (at which point
it is too late to return an error) to the call handling. This means several
calls to vfs_getattr are needed in nfsproc.c. Many are encapsulated in
nfsd_return_attrs and nfsd_return_dirop.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
nfsd_sync* return an errno, which usually needs to be converted to an errno,
sometimes immediately, sometimes a little later.
Also, nfsd_setattr returns an nfserr which SHOULDN'T be converted from
an errno (because it isn't one).
Also some tidyups of the form:
err = XX
err = nfserrno(err)
and
err = XX
if (err)
err = nfserrno(err)
become
err = nfserrno(XX)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
missing nfserrno() in default case of a switch by return value of
posix_lock_file(); as the result we send negative host-endian to clients that
expect positive network-endian, preferably mentioned in RFC... BTW, that case
is not impossible - posix_lock_file() can return -ENOLCK and we do not handle
that one explicitly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
->rp_status is network-endian and nobody byteswaps it before sending to
client; putting NFSERR_SERVERFAULT instead of nfserr_serverfault in there is
not nice...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
-EINVAL (in host order, no less) is not a good thing to return to client.
nfsd4_truncate() returns it in one case and its callers expect nfs_.... from
it. AFAICS, it should be nfserr_inval
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Several failure exits return -E<something> instead of nfserr_<something> and
vice versa.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Clean up some unnecessary special-casing in the setattr code..
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix bug in rdattr_error return which causes correct error code to be
overwritten by nfserr_toosmall.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Bad bookkeeping of the share reservations when handling open upgrades was
causing open downgrade to fail.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
In an earlier patch (commit b648330a1d741d5df8a5076b2a0a2519c69c8f41) I noted
that a too-early grace-period check was preventing us from bumping the
sequence id on open. Unfortunately in that patch I stupidly moved the
grace-period check back too far, so now an open for create can succesfully
create the file while still returning ERR_GRACE.
The correct place for that check is after we've set the open_owner and handled
any replays, but before we actually start mucking with the filesystem.
Thanks to Avishay Traeger for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
nfsd4_process_open1 is very highly nested; flatten it out a bit.
Also, the preceding comment, which just outlines the logic, seems redundant.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove some goto's that made the logic here a little more tortuous than
necessary.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We shouldn't check for replays until after checking whether the open owner is
confirmed. Clients are allowed to reuse openowners without bumping the seqid.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We need to make sure open reclaims are marked confirmed immediately so that we
can handle replays even if they fail (e.g. with a seqid-incrementing error).
(See 8.1.8.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make sure we get a directory when we look up the recovery directory.
Thanks to Christoph Hellwig for the bug report.
Based on feedback from Christoph and others, we may remove the need for this
lookup and just pass in a file descriptor from userspace instead, and/or
completely move the directory handling to userspace. For now we're just
fixing the obvious bugs.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We should be opening this directory RDONLY, not RDWR.
Thanks to Christoph Hellwig for the bug report.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Simple, useful debugging printk: print the number of each op as we process it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix some bad logic.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It's confusing having both release_stateowner() and release_state_owner().
And as it turns out, release_state_owner() is short and only called from one
place; so just remove it.
Also note the confirmed check is superfluous there--preprocess_seqid_op
already check this.
And remove a redundant comment and a superfluous line assignment while we're
at it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
One of the things that's confusing about nfsd4_lock is that the lk_stateowner
field could be set to either of two different lockowners: the open owner or
the lock owner. Rename to lk_replay_owner and add a comment to make it clear
that it's used for whichever stateowner has its sequence id bumped for replay
detection.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
release_state_owner also puts the lock owner on the close_lru. There's no
need for that, though; replays of the failed lock would be handled by the
openowner not the lockowner.
Also consolidate the cleanup a bit, fixing leaks that can happen if errors
occur between the time a new lock owner is allocated and the lock is done.
Remove a comment and dprintk that look a little redundant.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Logic fixes for LOCK and UNLOCK.
- Move the permission check on the current file handle outside of
nfs4_lock_state()
- remove the file manager fl_release_private calls; fl_ops is not set.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
These are both called from two places close together. I could rearrange that
code so there is only one call site, but just removing the 'inline' is
probably best.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change nfsd_sync_dir to return an error if ->sync fails, and pass that error
up through the stack. This involves a number of rearrangements of error
paths, and care to distinguish between Linux -errno numbers and NFSERR
numbers.
In the 'create' routines, we continue with the 'setattr' even if a previous
sync_dir failed.
This patch is quite different from Takashi's in a few ways, but there is still
a strong lineage.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Set the correct type and creator for symlinks.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
HFS+ also requires the correct creation date so recent version of OS X
recognize it as link.
Improve link handling:
- if something is wrong with the link, ignore the link attribute and treat
it as regular file (this also fixes a missing unlock during lookup).
- check for incorrect link counts during unlink.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Read the correct ctime from disk (it was written but never read for some
reason). Read also creation date, which is used in the next patch. (Problem
found by Olivier Castan <olivier.castan@certa.ssi.gouv.fr>)
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add support for HFSX, which allows for case-sensitive filenames.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add the log level and a "hfs: " prefix to all kernel prints.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add the log level and a "hfs: " prefix to all kernel prints. (HFS and HFS+
will use the same prefix, as they share some code and could be merged at some
point.)
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
All standard system calls should be declared in include/linux/syscalls.h.
Add some of the new additions that were previously missed.
Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
v9fs mmap support was originally removed from v9fs at Al Viro's request,
but recently there have been requests from folks who want readpage
functionality (primarily to enable execution of files mounted via 9P).
This patch adds readpage support (but not writepage which contained most of
the objectionable code). It passes fsx-linux (and other regressions) so it
should be relatively safe.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
While checkpointing we have to check that our transaction still is in the
checkpoint list *and* (not or) that it's not just a different transaction
with the same address.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
a page while we are still submitting other buffers on the same page for
I/O.
SGI-PV: 948197
SGI-Modid: xfs-linux-melb:xfs-kern:25004a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
|
|
Fix race in setting bitfields of fuse_conn. Spotted by Andrew Morton.
The two fields ->connected and ->mounted were always changed with the
fuse_lock held. But other bitfields in the same structure were changed
without the lock. In theory this could lead to losing the assignment of
even the ones under lock. The chosen solution is to change these two
fields to be a full unsigned type. The other bitfields aren't "important"
enough to warrant the extra complexity of full locking or changing them to
bitops.
For all bitfields document why they are safe wrt. concurrent
assignments.
Also make the initialization of the 'num_waiting' atomic counter explicit.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch changes fuse_readpages() to send READ requests asynchronously.
This makes it possible for userspace filesystems to utilize the kernel
readahead logic instead of having to implement their own (resulting in double
caching).
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add a separate function for filling in the READ request. This will make it
possible to send asynchronous READ requests as well as synchronous ones.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Now the INIT requests can be completely handled in inode.c and the
fuse_send_init() function need not be global any more.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add possibility for requests to run asynchronously and call an 'end' callback
when finished.
With this, the special handling of the INIT and RELEASE requests can be
cleaned up too.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add ability to abort a filesystem connection.
With the introduction of asynchronous reads, the ability to interrupt any
request is not enough to dissolve deadlocks, since now waiting for the request
completion (page unlocked) is independent of the actual request, so in a
deadlock all threads will be uninterruptible.
The solution is to make it possible to abort all requests, even those
currently undergoing I/O to/from userspace. The natural interface for this is
'mount -f mountpoint', but that only works as long as the filesystem is
attached. So also add an 'abort' attribute to the sysfs view of the
connection.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch adds the 'waiting' attribute which indicates how many filesystem
requests are currently waiting to be completed. A non-zero value without any
filesystem activity indicates a hung or deadlocked filesystem.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Kobjectify fuse_conn, and make it visible under /sys/fs/fuse/connections.
Lacking any natural naming, connections are numbered.
This patch doesn't add any attributes, just the infrastructure.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The ->connected flag for a fuse_conn object previously only indicated whether
the device file for this connection is currently open or not.
Change it's meaning so that it indicates whether the connection is active or
not: now either umount or device release will clear the flag.
The separate ->mounted flag is still needed for handling background requests.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Create a new list for requests in the process of being transfered to/from
userspace. This will be needed to be able to abort all requests even those
currently under I/O
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The state of request was made up of 2 bitfields (->sent and ->finished) and of
the fact that the request was on a list or not.
Unify this into a single state field.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- remove some unneeded assignments
- use kzalloc instead of kmalloc + memset
- simplify setting sb->s_fs_info
- in fuse_send_init() use fuse_get_request() instead of
do_get_request() helper
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
