| Age | Commit message (Collapse) | Author |
|---|
|
We update information in logical volume integrity descriptor after each
allocation (as LVID contains free space, number of directories and files on
disk etc.). If the filesystem is on some phase change media, this leads to its
quick degradation as such media is able to handle only 10000 overwrites or so.
We solve the problem by writing new information into LVID only on umount,
remount-ro and sync. This solves the problem at the price of longer media
inconsistency (previously media became consistent after pdflush flushed dirty
LVID buffer) but that should be acceptable.
Report by and patch written in cooperation with
Rich Coe <Richard.Coe@med.ge.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Anchor block can be located at several places on the medium. Two of the
locations are relative to media end which is problematic to detect. Also
some drives report some block as last but are not able to read it or any
block nearby before it. So let's first try block 256 and if it is all fine,
don't look at other possible locations of anchor blocks to avoid IO errors.
This change required a larger reorganization of code but the new code is
hopefully more readable and definitely shorter.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch makes the UDF FS driver use the hardware sector size as the
default logical block size, which is required by the UDF specifications.
While the previous default of 2048 bytes was correct for optical disks,
it was not for hard disks or USB storage devices, and made it impossible
to use such a device with the default mount options. (The Linux mkudffs
tool uses a default block size of 2048 bytes even on devices with
smaller hardware sectors, so this bug is unlikely to be noticed unless
UDF-formatted USB storage devices are exchanged with other OSs.)
To avoid regressions for people who use loopback optical disk images or
who used the (sometimes wrong) defaults of mkudffs, we also try with
a block size of 2048 bytes if no anchor was found with the hardware
sector size.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
On x86 (and several other archs) mode_t is defined as "unsigned short"
and comparing unsigned shorts to negative ints is broken (because short
is promoted to int and then compared). Fix it.
Reported-and-tested-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
"dmode" allows overriding permissions of directories and
"mode" allows overriding permissions of files.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch implements parsing of metadata partitions and reading of Metadata
File thus allowing to read UDF 2.50 media. Error resilience is implemented
through accessing the Metadata Mirror File in case the data the Metadata File
cannot be read. The patch is based on the original patch by Sebastian Manciulea
<manciuleas@yahoo.com> and Mircea Fedoreanu <mirceaf_spl@yahoo.com>.
Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com>
Signed-off-by: Mircea Fedoreanu <mirceaf_spl@yahoo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
UDF anchor block detection is complicated by several things - there are several
places where the anchor point can be, some of them relative to the last
recorded block which some devices report wrongly. Moreover some devices on some
media seem to have 7 spare blocks sectors for every 32 blocks (at least as far
as I understand the old code) so we have to count also with that possibility.
This patch splits anchor block detection into several functions so that it is
clearer what we actually try to do. We fix several bugs of the type "for such
and such media, we fail to check block blah" as a result of the cleanup.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
There's really no reason to keep udf headers in include/linux as they're
not used by anything but fs/udf/.
This patch merges most of include/linux/udf_fs_i.h into fs/udf/udf_i.h,
include/linux/udf_fs_sb.h into fs/udf/udf_sb.h and
include/linux/udf_fs.h into fs/udf/udfdecl.h.
The only thing remaining in include/linux/ is a stub of udf_fs_i.h
defining the four user-visible udf ioctls. It's also moved from
unifdef-y to headers-y because it can be included unconditionally now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add a .show_options super operation to udf.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
convert UDF_SB_ALLOC_BITMAP macro to udf_sb_alloc_bitmap function
convert UDF_SB_FREE_BITMAP macro to udf_sb_free_bitmap function
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- convert UDF_SB_ALLOC_PARTMAPS macro to udf_sb_alloc_partition_maps function
- convert kmalloc + memset to kcalloc
- check if kcalloc failed (partially)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
remove macros:
- UDF_SB_PARTMAPS
- UDF_SB_PARTTYPE
- UDF_SB_PARTROOT
- UDF_SB_PARTLEN
- UDF_SB_PARTVSN
- UDF_SB_PARTNUM
- UDF_SB_TYPESPAR
- UDF_SB_TYPEVIRT
- UDF_SB_PARTFUNC
- UDF_SB_PARTFLAGS
- UDF_SB_VOLIDENT
- UDF_SB_NUMPARTS
- UDF_SB_PARTITION
- UDF_SB_SESSION
- UDF_SB_ANCHOR
- UDF_SB_LASTBLOCK
- UDF_SB_LVIDBH
- UDF_SB_LVID
- UDF_SB_UMASK
- UDF_SB_GID
- UDF_SB_UID
- UDF_SB_RECORDTIME
- UDF_SB_SERIALNUM
- UDF_SB_UDFREV
- UDF_SB_FLAGS
- UDF_SB_VAT
- UDF_UPDATE_UDFREV
- UDF_SB_FREE
and open code them
convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function
rename some struct udf_sb_info fields:
- s_volident to s_volume_ident
- s_lastblock to s_last_block
- s_lvidbh to s_lvid_bh
- s_recordtime to s_record_time
- s_serialnum to s_serial_number;
- s_vat to s_vat_inode;
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fix weird behaviour of UDF mounting procedure. To get UID
changed (for now) we have to type
mount -t udf -o uid=some_user,uid=ignore /dev/device /mnt/moun_point
and specifying two uid at once is strange a bit. So with the patch we are
able to mount without additional 'uid=ignore' option. The same for GID
option is done.
This patch will not break current mount scheme (with two option).
Btw this does fix (I hope) the following
[BUG 6124] mount of UDF fs ignores UID and GID options
http://bugzilla.kernel.org/show_bug.cgi?id=6124
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael <auslands-kv@gmx.de>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes up sources after conversion by Lindent.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch converts UDF coding style to kernel coding style using Lindent.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make UDF use get_bh() instead of directly accessing b_count and use
brelse() instead of udf_release_data() which does just brelse()...
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a bug in udf where it would write uid/gid = 0 to the disk for files
owned by the id given with the uid=/gid= mount options. It also adds 4 new
mount options: uid/gid=forget and uid/gid=ignore. Without any options the
id in core and on disk always match. Giving uid/gid=nnn specifies a
default ID to be used in core when the on disk ID is -1. uid/gid=ignore
forces the in core ID to allways be used no matter what the on disk ID is.
uid/gid=forget forces the on disk ID to always be written out as -1.
The use of these options allows you to override ownerships on a disk or
disable ownwership information from being written, allowing the media to be
used portably between different computers and possibly different users
without permissions issues that would require root to correct.
Signed-off-by: Phillip Susi <psusi@cfl.rr.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is the fs/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in fs/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
