aboutsummaryrefslogtreecommitdiff
path: root/fs/nfs
AgeCommit message (Collapse)Author
2011-07-12NFS: fix commentWeston Andros Adamson
We support IPv4 and IPv6 now. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: use scope from exchange_id to skip reclaimWeston Andros Adamson
can be skipped if the "eir_server_scope" from the exchange_id proc differs from previous calls. Also, in the future server_scope will be useful for determining whether client trunking is available Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: pnfs: loop over multipath addrs on connectWeston Andros Adamson
Don't just use the first addr in the multipath list - instead, loop over addresses when calling nfs4_set_ds_client() (which calls connect) until it is successful. Although this is not real multipath support, it's a quick fix to handle when an MDS sends a list of addresses for a DS and some of the addr families are unsupported or misconfigured (like no routable ipv6 addr assigned). This will attempt all paths to the DS before giving up, instead of immediately falling back to the MDS. As before, an error encountered after a successful connect() will cause all i/o to fall back to the MDS. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: Parse and store all multipath DS addressesWeston Andros Adamson
This parses and stores all addresses associated with each data server, laying the groundwork for supporting multipath to data servers. - Skips over addresses that cannot be parsed (ie IPv6 addrs if v6 is not enabled). Only fails if none of the addresses are recognizable - Currently only uses the first address that parsed cleanly - Tested against pynfs server (modified to support multipath) Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-12NFS: pnfs IPv6 supportWeston Andros Adamson
Handle ipv6 remote addresses from GETDEVICEINFO - supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies - added ds_remotestr to avoid having to handle different AFs in every dprintk - tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs - tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to refuse to accept IPv6 addresses Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-07-11NFSv4.1: update nfs4_fattr_bitmap_maxszAndy Adamson
Attribute IDs assigned in RFC 5661 now require three bitmaps. Fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs. Signed-off-by: Andy Adamson <andros@netapp.com> Cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-28pnfs: write: Set mds_offset in the generic layer - it is needed by all LDsBoaz Harrosh
In current pnfs tree, all the layouts set mds_offset in their .write_pagelist member. mds_offset is only used by generic layer and should be handled by it. This patch is for upstream. It is needed in this -rc series to fix a bug in objects layout_commit. I'll send patches for objects and blocks to be squashed into current pnfs tree. TODO: It looks like the read path needs the same patch. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-21NFS: Fix decode_secinfo_maxszBryan Schumaker
I initially did the calculation in bytes, and not words Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-21NFSv4.1: Fix an off-by-one error in pnfs_generic_pg_testTrond Myklebust
And document what is going on there... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-21NFSv4.1: Fix some issues with pnfs_generic_pg_testTrond Myklebust
1. If the intention is to coalesce requests 'prev' and 'req' then we have to ensure at least that we have a layout starting at req_offset(prev). 2. If we're only requesting a minimal layout of length desc->pg_count, we need to test the length actually returned by the server before we allow the coalescing to occur. 3. We need to deal correctly with (pgio->lseg == NULL) 4. Fixup the test guarding the pnfs_update_layout. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-20NFSv4.1: file layout must consider pg_bsize for coalescingBenny Halevy
Otherwise we end up overflowing the rpc buffer size on the receive end. Signed-off-by: Benny Halevy <benny@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-19pnfs-obj: No longer needed to take an extra ref at add_deviceBoaz Harrosh
Andy's last device_cache patches, already take an extra reference on the newly inserted device_id. So we can remove it from obj-io. Without this patch the device_ids are leaked. Andy's patches are not in Linus tree yet. So I'm not sure if they are scheduled for this Kernel or the next. This patch should be added as part of these. CC: Andy Adamson <andros@netapp.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-16NFSv4: Fix a readdir regressionTrond Myklebust
Commit 7ebb9315 (NFS: use secinfo when crossing mountpoints) introduces a regression when decoding an NFSv4 readdir entry that sets the rdattr_error field. By treating the resulting value as if it is a decoding error, the current code may cause us to skip valid readdir entries. Reported-by: Andy Adamson <andros@netapp.com> Cc: stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15nfs4.1: mark layout as bad on error path in _pnfs_return_layoutFred Isaman
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15nfs4.1: prevent race that allowed use of freed layout in _pnfs_return_layoutFred Isaman
mark_matching_lsegs_invalid could put the last ref to the layout, so the get_layout_hdr needs to be called first. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: need to put_layout_hdr on _pnfs_return_layout error pathBenny Halevy
We always get a reference on the layout header and we rely on nfs4_layoutreturn_release to put it. If we hit an allocation error before starting the rpc proc we bail out early without dereferncing the layout header properly. Signed-off-by: Benny Halevy <benny@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFS: (d)printks should use %zd for ssize_t argumentsDavid Howells
(d)printks should use %zd for ssize_t arguments not %ld, otherwise they might get a warning. I see the following with MN10300. fs/nfs/objlayout/objlayout.c: In function 'objlayout_read_done': fs/nfs/objlayout/objlayout.c:294: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t' Signed-off-by: David Howells <dhowells@redhat.com> cc: Trond Myklebust <Trond.Myklebust@netapp.com> cc: linux-nfs@vger.kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: fix break condition in pnfs_find_lsegBenny Halevy
The break condition to skip out of the loop got broken when cmp_layout was change. Essentially, we want to stop looking once we know no layout on the remainder of the list can match the first byte of the looked-up range. Reported-by: Peng Tao <peng_tao@emc.com> Signed-off-by: Benny Halevy <benny@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15nfs4.1: fix several problems with _pnfs_return_layoutFred Isaman
_pnfs_return_layout had the following problems: - it did not call pnfs_free_lseg_list on all paths - it unintentionally did a forgetful return when there was no outstanding io - it raced with concurrent LAYOUTGETS Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: allow zero fh array in filelayout decode layoutAndy Adamson
Signed-off-by: Andy Adamson <andros@netapp.com> cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: allow nfs_fhget to succeed with mounted on fileidAndy Adamson
Commit 28331a46d88459788c8fca72dbb0415cd7f514c9 "Ensure we request the ordinary fileid when doing readdirplus" changed the meaning of NFS_ATTR_FATTR_FILEID which used to be set when FATTR4_WORD1_MOUNTED_ON_FILED was requested. Allow nfs_fhget to succeed with only a mounted on fileid when crossing a mountpoint or a referral. Ask for the fileid of the absent file system if mounted_on_fileid is not supported. Signed-off-by: Andy Adamson <andros@netapp.com> cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: Fix a refcounting issue in the pNFS device id cacheTrond Myklebust
When we add something to the global device id cache, we need to bump the reference count, so that the cache itself holds a reference. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFSv4.1: deprecate headerpadsz in CREATE_SESSIONBenny Halevy
We don't support header padding yet so better off ditching it Reported-by: Sid Moore <learnmost@gmail.com> Signed-off-by: Benny Halevy <benny@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFS41: do not update isize if inode needs layoutcommitPeng Tao
nfs_update_inode will update isize if there is no queued pages. For pNFS, layoutcommit is supposed to change file size on server, the same effect as queued pages. nfs_update_inode may be called when dirty pages are written back (nfsi->npages==0) but layoutcommit is not sent, and it will change client file size according to server file size. Then client ends up losing what it just writes back in pNFS path. So we should skip updating client file size if file needs layoutcommit. Signed-off-by: Peng Tao <peng_tao@emc.com> Cc: stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-06-15NFS: fix umount of pnfs filesystemsWeston Andros Adamson
Unmounting a pnfs filesystem hangs using filelayout and possibly others. This fixes the use of the rcu protected node by making use of a new 'tmpnode' for the temporary purge list. Also, the spinlock shouldn't be held when calling synchronize_rcu(). Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-05-29Merge branch 'pnfs-submit' of git://git.open-osd.org/linux-open-osdLinus Torvalds
* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits) pnfs-obj: pg_test check for max_io_size NFSv4.1: define nfs_generic_pg_test NFSv4.1: use pnfs_generic_pg_test directly by layout driver NFSv4.1: change pg_test return type to bool NFSv4.1: unify pnfs_pageio_init functions pnfs-obj: objlayout_encode_layoutcommit implementation pnfs: encode_layoutcommit pnfs-obj: report errors and .encode_layoutreturn Implementation. pnfs: encode_layoutreturn pnfs: layoutret_on_setattr pnfs: layoutreturn pnfs-obj: osd raid engine read/write implementation pnfs: support for non-rpc layout drivers pnfs-obj: define per-inode private structure pnfs: alloc and free layout_hdr layoutdriver methods pnfs-obj: objio_osd device information retrieval and caching pnfs-obj: decode layout, alloc/free lseg pnfs-obj: pnfs_osd XDR client implementation pnfs-obj: pnfs_osd XDR definitions pnfs-obj: objlayoutdriver module skeleton ...
2011-05-29Merge branch 'nfs-for-2.6.40' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Support for RPC over AF_LOCAL transports SUNRPC: Remove obsolete comment SUNRPC: Use AF_LOCAL for rpcbind upcalls SUNRPC: Clean up use of curly braces in switch cases NFS: Revert NFSROOT default mount options SUNRPC: Rename xs_encode_tcp_fragment_header() nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() nfs41: Correct offset for LAYOUTCOMMIT NFS: nfs_update_inode: print current and new inode size in debug output NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors NFSv4: Handle expired stateids when the lease is still valid SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...
2011-05-29pnfs-obj: pg_test check for max_io_sizeBoaz Harrosh
Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [simplify logic] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: define nfs_generic_pg_testBoaz Harrosh
By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: use pnfs_generic_pg_test directly by layout driverBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: change pg_test return type to boolBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29NFSv4.1: unify pnfs_pageio_init functionsBenny Halevy
Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: objlayout_encode_layoutcommit implementationBoaz Harrosh
* Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: encode_layoutcommitBenny Halevy
Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: report errors and .encode_layoutreturn Implementation.Boaz Harrosh
An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: encode_layoutreturnAndy Adamson
Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by: Andy Adamson <andros@netapp.com> [fixup layout header pointer for encode_layoutreturn] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: layoutret_on_setattrBenny Halevy
With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: layoutreturnBenny Halevy
NFSv4.1 LAYOUTRETURN implementation Currently, does not support layout-type payload encoding. Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Andy Adamson <andros@citi.umich.edu> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> [call pnfs_return_layout right before pnfs_destroy_layout] [remove assert_spin_locked from pnfs_clear_lseg_list] [remove wait parameter from the layoutreturn path.] [remove return_type field from nfs4_layoutreturn_args] [remove range from nfs4_layoutreturn_args] [no need to send layoutcommit from _pnfs_return_layout] [don't wait on sync layoutreturn] [fix layout stateid in layoutreturn args] [fixed NULL deref in _pnfs_return_layout] [removed recaim member of nfs4_layoutreturn_args] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: osd raid engine read/write implementationBoaz Harrosh
With the use of the in-kernel osd library. Implement read/write of data from/to osd-objects according to information specified in the objects-layout. Support for stripping over mirrors with a received stripe_unit. There are however a few constrains which are not supported: 1. Stripe Unit must be a multiple of PAGE_SIZE 2. stripe length (stripe_unit * number_of_stripes) can not be bigger then 32bit. Also support raid-groups and partial-layout. Partial-layout is when not all the groups are received on the line, addressing only a partial range of the file. TODO: Only raid0! raid 4/5/6 support will come at later stage A none supported layout will send IO through the MDS [Important fallout from the last rebase] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: support for non-rpc layout driversBenny Halevy
Non-rpc layout driver such as for objects and blocks implement their own I/O path and error handling logic. Therefore bypass NFS-based error handling for these layout drivers. [fix lseg ref-count bugs, and null de-refs] [Fall out from: non-rpc layout drivers] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [get rid of PNFS_USE_RPC_CODE] [get rid of __nfs4_write_done_cb] [revert useless change in nfs4_write_done_cb] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: define per-inode private structureBenny Halevy
allocate and deallocate per-inode private pnfs_layout_hdr in preparation for I/O implementation. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: alloc and free layout_hdr layoutdriver methodsBenny Halevy
[gfp_flags] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: objio_osd device information retrieval and cachingBoaz Harrosh
When a new layout is received in objio_alloc_lseg all device_ids referenced are retrieved. The device information is queried for from MDS and then the osd_device is looked-up from the osd-initiator library. The devices are cached in a per-mount-point list, for later use. At unmount all devices are "put" back to the library. objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware API for retrieving device information given a device_id. TODO: The device cache can get big. Cap its size. Keep an LRU and start to return devices which were not used, when list gets to big, or when new entries allocation fail. [pnfs-obj: Bugs in new global-device-cache code] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [gfp_flags] [use global device cache] [use layout driver in global device cache] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: decode layout, alloc/free lsegBoaz Harrosh
objlayout_alloc_lseg prepares an xdr_stream and calls the raid engins objio_alloc_lseg() to allocate a private pnfs_layout_segment. objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to decode and store the layout_segment information in an objio_segment struct, using the pnfs_osd_xdr.h API for the actual parsing the layout xdr. objlayout_free_lseg calls objio_free_lseg() to free the allocated space. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [gfp_flags] [removed "extern" from function definitions] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: pnfs_osd XDR client implementationBoaz Harrosh
* Add the fs/nfs/objlayout/pnfs_osd_xdr_cli.c file, which will include the XDR encode/decode implementations for the pNFS client objlayout driver. [Wrong type in comments] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs-obj: objlayoutdriver module skeletonBenny Halevy
* Define the PNFS_OBJLAYOUT Kconfig option in the nfs master Kconfig file. * Add the objlayout driver to the Kernel's Kbuild system. * Add the fs/nfs/objlayout/Kbuild file for building the objlayoutdriver.ko driver * Define fs/nfs/objlayout/objio_osd.c, register the driver on module initialization and unregister on exit. [pnfs-obj: remove of CONFIG_PNFS fallout] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [added "unsure" clause] [depend on NFS_V4_1] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: client statsJ. Bruce Fields
A pNFS client auto-negotiates a lot of features (minorversion level, pNFS layout type, etc.). This is convenient, but makes certain kinds of failures hard for a user to detect. For example, if the client falls back on 4.0, or falls back to MDS IO because the user didn't connect to the right iscsi disks before mounting, the only symptoms may be reduced performance, which may not be noticed till long after the actual failure, and may be difficult for a user to diagnose. However, such "failures" may also be perfectly normal in some cases, so we don't want to spam the system logs with them. One approach would be to put some more information into /proc/self/mountstats. Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [pnfs: add commit client stats] [fixup data types for "ret" variables in pnfs_try_to* inline funcs.] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [fix definition of show_pnfs for !CONFIG_PNFS] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case] There is a build error when CONFIG_NFS_V4 is set but CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype was unbalanced between the two cases. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> [pnfs: super.c remove CONFIG_PNFS] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: Use byte-range for cb_layoutrecallBenny Halevy
Use recalled range to invalidate particular layout segments in the layout cache. Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: align layoutget requests on page boundariesBenny Halevy
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2011-05-29pnfs: Use byte-range for layoutgetBenny Halevy
Add offset and count parameters to pnfs_update_layout and use them to get the layout in the pageio path. Order cache layout segments in the following order: * offset (ascending) * length (descending) * iomode (RW before READ) Test byte range against the layout segment in use in pnfs_{read,write}_pg_test so not to coalesce pages not using the same layout segment. [fix lseg ordering] [clean up pnfs_find_lseg lseg arg] [remove unnecessary FIXME] [fix ordering in pnfs_insert_layout] [clean up pnfs_insert_layout] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-15 23:00:57 +0000