| Age | Commit message (Collapse) | Author |
|---|
|
Reads and writes have very similar results. This patch combines the two
structs together with comments to show where the differing fields are
used.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Reads and writes have very similar arguments. This patch combines them
together and documents the few fields used only by write.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Security labels go with each directory entry, thus they are always
stored in the page cache, not in the head buffer. The length of the
reply that goes in head[0] should not have changed to support
NFSv4.2 labels.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Avoid returning incorrect acl mask attributes when the server doesn't
support ACLs.
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
decode_op_hdr() cannot distinguish between an XDR decoding error and
the perfectly valid errorcode NFS4ERR_IO. This is normally not a
problem, but for the particular case of OPEN, we need to be able
to increment the NFSv4 open sequence id when the server returns
a valid response.
Reported-by: J Bruce Fields <bfields@fieldses.org>
Link: http://lkml.kernel.org/r/20131204210356.GA19452@fieldses.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
|
|
Currently, if the server is doing NFSv4.2 and supports labeled NFS, then
our on-the-wire READDIR request ends up asking for the label information,
which is then ignored unless we're doing readdirplus.
This patch ensures that READDIR doesn't ask the server for label information
at all unless the readdir->bitmask contains the FATTR4_WORD2_SECURITY_LABEL
attribute, and the readdir->plus flag is set.
While we're at it, optimise away the 3rd bitmap field if it is zero.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Introduce a mechanism for probing a server to determine if an FSID
is present or absent.
The on-the-wire compound is different between minor version 0 and 1.
Minor version 0 appends a RENEW operation to identify which client
ID is probing. Minor version 1 has a SEQUENCE operation in the
compound which effectively carries the same information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The nfs4_proc_fs_locations() function is invoked during referral
processing to perform a GETATTR(fs_locations) on an object's parent
directory in order to discover the target of the referral. It
performs a LOOKUP in the compound, so the client needs to know the
parent's file handle a priori.
Unfortunately this function is not adequate for handling migration
recovery. We need to probe fs_locations information on an FSID, but
there's no parent directory available for many operations that
can return NFS4ERR_MOVED.
Another subtlety: recovering from NFS4ERR_LEASE_MOVED is a process
of walking over a list of known FSIDs that reside on the server, and
probing whether they have migrated. Once the server has detected
that the client has probed all migrated file systems, it stops
returning NFS4ERR_LEASE_MOVED.
A minor version zero server needs to know what client ID is
requesting fs_locations information so it can clear the flag that
forces it to continue returning NFS4ERR_LEASE_MOVED. This flag is
set per client ID and per FSID. However, the client ID is not an
argument of either the PUTFH or GETATTR operations. Later minor
versions have client ID information embedded in the compound's
SEQUENCE operation.
Therefore, by convention, minor version zero clients send a RENEW
operation in the same compound as the GETATTR(fs_locations), since
RENEW's one argument is a clientid4. This allows a minor version
zero server to identify correctly the client that is probing for a
migration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The operation status is decoded in decode_op_hdr.
Stop the print_overflow message that is always hit without this patch:
nfs: decode_free_stateid: prematurely hit end of receive buffer. Remaining
buffer length is 0 words.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This is a minimal client side implementation of SP4_MACH_CRED. It will
attempt to negotiate SP4_MACH_CRED iff the EXCHANGE_ID is using
krb5i or krb5p auth. SP4_MACH_CRED will be used if the server supports the
minimal operations:
BIND_CONN_TO_SESSION
EXCHANGE_ID
CREATE_SESSION
DESTROY_SESSION
DESTROY_CLIENTID
This patch only includes the EXCHANGE_ID negotiation code because
the client will already use the machine cred for these operations.
If the server doesn't support SP4_MACH_CRED or doesn't support the minimal
operations, the exchange id will be resent with SP4_NONE.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Plumb in a mechanism for plugging an NFSv4.0 mount, using the
same infrastructure as NFSv4.1 sessions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We always encode to __be32 format in XDR: silences a sparse warning.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Andy Adamson <andros@netapp.com>
|
|
Technically, we don't really need to convert these time stamps,
since they are actually cookies.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <Chuck.Lever@oracle.com>
|
|
The attribute length is already calculated in advance. There is no
reason why we cannot calculate the bitmap in advance too so that
we don't have to play pointer games.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The calculation of the attribute length was 4 bytes off.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Technically, the Linux client is allowed by the NFSv4 spec to send
3 word bitmaps as part of an OPEN request. However, this causes the
current FreeBSD server to return NFS4ERR_ATTRNOTSUPP errors.
Fix the regression by making the Linux client use a 2 word bitmap unless
doing NFSv4.2 with labeled NFS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* labeled-nfs:
NFS: Apply v4.1 capabilities to v4.2
NFS: Add in v4.2 callback operation
NFS: Make callbacks minor version generic
Kconfig: Add Kconfig entry for Labeled NFS V4 client
NFS: Extend NFS xattr handlers to accept the security namespace
NFS: Client implementation of Labeled-NFS
NFS: Add label lifecycle management
NFS:Add labels to client function prototypes
NFSv4: Extend fattr bitmaps to support all 3 words
NFSv4: Introduce new label structure
NFSv4: Add label recommended attribute and NFSv4 flags
NFSv4.2: Added NFS v4.2 support to the NFS client
SELinux: Add new labeling type native labels
LSM: Add flags field to security_sb_set_mnt_opts for in kernel mount data.
Security: Add Hook to test if the particular xattr is part of a MAC model.
Security: Add hook to calculate context based on a negative dentry.
NFS: Add NFSv4.2 protocol constants
Conflicts:
fs/nfs/nfs4proc.c
|
|
The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the XDR overhead.
The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC
headers (including security flavor credentials and verifiers).
Split out the struct pnfs_device field maxcount which is the gdia_maxcount
from the pglen field which is the reply (the total) buffer length.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This patch implements the client transport and handling support for labeled
NFS. The patch adds two functions to encode and decode the security label
recommended attribute which makes use of the LSM hooks added earlier. It also
adds code to grab the label from the file attribute structures and encode the
label to be sent back to the server.
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Matthew N. Dodd <Matthew.Dodd@sparta.com>
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The fattr handling bitmap code only uses the first two fattr words sofar. This
patch adds the 3rd word to being sent but doesn't populate it yet.
Signed-off-by: Miguel Rodel Felipe <Rodel_FM@dsi.a-star.edu.sg>
Signed-off-by: Phua Eu Gene <PHUA_Eu_Gene@dsi.a-star.edu.sg>
Signed-off-by: Khin Mi Mi Aung <Mi_Mi_AUNG@dsi.a-star.edu.sg>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The main reason for doing this is will be to allow for an asynchronous
RPC mode that we can use for freeing lock stateids as per section
8.2.4 of RFC5661.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
* rpcsec_gss-from_cel: (21 commits)
NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE
NFSv4: Don't clear the machine cred when client establish returns EACCES
NFSv4: Fix issues in nfs4_discover_server_trunking
NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available
NFS: Use server-recommended security flavor by default (NFSv3)
SUNRPC: Don't recognize RPC_AUTH_MAXFLAVOR
NFS: Use "krb5i" to establish NFSv4 state whenever possible
NFS: Try AUTH_UNIX when PUTROOTFH gets NFS4ERR_WRONGSEC
NFS: Use static list of security flavors during root FH lookup recovery
NFS: Avoid PUTROOTFH when managing leases
NFS: Clean up nfs4_proc_get_rootfh
NFS: Handle missing rpc.gssd when looking up root FH
SUNRPC: Remove EXPORT_SYMBOL_GPL() from GSS mech switch
SUNRPC: Make gss_mech_get() static
SUNRPC: Refactor nfsd4_do_encode_secinfo()
SUNRPC: Consider qop when looking up pseudoflavors
SUNRPC: Load GSS kernel module by OID
SUNRPC: Introduce rpcauth_get_pseudoflavor()
SUNRPC: Define rpcsec_gss_info structure
NFS: Remove unneeded forward declaration
...
|
|
RFC 3530 says that the seconds value of a nfstime4 structure is a 64bit
value, but we are instead sending a 32-bit 0 and then a 32bit conversion
of the 64bit Linux value. This means that if we try to set atime to a
value before the epoch (touch -t 196001010101) the client will only send
part of the new value due to lost precision.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we're doing NFSv4.1 against a server that has persistent sessions,
then we should not need to call SETATTR in order to reset the file
attributes immediately after doing an exclusive create.
Note that since the create mode depends on the type of session that
has been negotiated with the server, we should not choose the
mode until after we've got a session slot.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently, the compound operation the Linux NFS client sends to the
server to confirm a client ID looks like this:
{ SETCLIENTID_CONFIRM; PUTROOTFH; GETATTR(lease_time) }
Once the lease is confirmed, it makes sense to know how long before
the client will have to renew it. And, performing these operations
in the same compound saves a round trip.
Unfortunately, this arrangement assumes that the security flavor
used for establishing a client ID can also be used to access the
server's pseudo-fs.
If the server requires a different security flavor to access its
pseudo-fs than it allowed for the client's SETCLIENTID operation,
the PUTROOTFH in this compound fails with NFS4ERR_WRONGSEC. Even
though the SETCLIENTID_CONFIRM succeeded, our client's trunking
detection logic interprets the failure of the compound as a failure
by the server to confirm the client ID.
As part of server trunking detection, the client then begins another
SETCLIENTID pass with the same nfs4_client_id. This fails with
NFS4ERR_CLID_INUSE because the first SETCLIENTID/SETCLIENTID_CONFIRM
already succeeded in confirming that client ID -- it was the
PUTROOTFH operation that caused the SETCLIENTID_CONFIRM compound to
fail.
To address this issue, separate the "establish client ID" step from
the "accessing the server's pseudo-fs root" step. The first access
of the server's pseudo-fs may require retrying the PUTROOTFH
operation with different security flavors. This access is done in
nfs4_proc_get_rootfh().
That leaves the matter of how to retrieve the server's lease time.
nfs4_proc_fsinfo() already retrieves the lease time value, though
none of its callers do anything with the retrieved value (nor do
they mark the lease as "renewed").
Note that NFSv4.1 state recovery invokes nfs4_proc_get_lease_time()
using the lease management security flavor. This may cause some
heartburn if that security flavor isn't the same as the security
flavor the server requires for accessing the pseudo-fs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The NFSv4 SECINFO procedure returns a list of security flavors. Any
GSS flavor also has a GSS tuple containing an OID, a quality-of-
protection value, and a service value, which specifies a particular
GSS pseudoflavor.
For simplicity and efficiency, I'd like to return each GSS tuple
from the NFSv4 SECINFO XDR decoder and pass it straight into the RPC
client.
Define a data structure that is visible to both the NFS client and
the RPC client. Take structure and field names from the relevant
standards to avoid confusion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the server sends us a pathname with more components than the client
limit of NFS4_PATHNAME_MAXCOMPONENTS, more server entries than the client
limit of NFS4_FS_LOCATION_MAXSERVERS, or sends a total number of
fs_locations entries than the client limit of NFS4_FS_LOCATIONS_MAXENTRIES
then we will currently Oops because the limit checks are done _after_ we've
decoded the data into the arrays.
Reported-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If we replay a READ or WRITE call, we should not be changing the
stateid. Currently, we may end up doing so, because the stateid
is only selected at xdr encode time.
This patch ensures that we select the stateid after we get an NFSv4.1
session slot, and that we keep that same stateid across retries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When reading uids and gids off the wire convert them to
kuids and kgids.
When putting kuids and kgids onto the wire first convert
them to uids and gids the other side will understand.
When printing kuids and kgids convert them to values in
the initial user namespace then use normal printf formats.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
|
|
Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When the server tells us that it is dynamically resizing the session
replay cache, we should reset the sequence number for those slots
that have been deallocated.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Dynamic slot allocation in NFSv4.1 depends on the client being able to
track the server's target value for the highest slotid in the
slot table. See the reference in Section 2.10.6.1 of RFC5661.
To avoid ordering problems in the case where 2 SEQUENCE replies contain
conflicting updates to this target value, we also introduce a generation
counter, to track whether or not an RPC containing a SEQUENCE operation
was launched before or after the last update.
Also rename the nfs4_slot_table target_max_slots field to
'target_highest_slotid' to avoid confusion with a slot
table size or number of slots.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Replace the session pointer + slotid with a pointer to the
allocated slot.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Instead of doing slot table pointer gymnastics every time we want to
know which slot we're using.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Move the session pointer into the slot table, then have struct nfs4_slot
point to that slot table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
encode_exchange_id() uses more stack space than necessary, giving a compile
time warning. Reduce the size of the static buffer for implementation name.
Signed-off-by: Jim Rees <rees@umich.edu>
Reviewed-by: "Adamson, Dros" <Weston.Adamson@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Convert the ones that are not trivial to check into WARN_ON_ONCE().
Remove checks for things such as NFS2_MAXPATHLEN, which are trivially
done by the caller.
Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being
done there is just wrong...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We currently make no distinction in attribute requests between normal OPENs
and OPEN with CLAIM_PREVIOUS. This offers more possibility of failures in
the GETATTR response which foils OPEN reclaim attempts.
Reduce the requested attributes to the bare minimum needed to update the
reclaim open stateid and split nfs4_opendata_to_nfs4_state processing
accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Don't put an ACCESS op in OPEN compound if O_EXCL, because ACCESS
will return permission denied for all bits until close.
Fixes a regression due to commit 6168f62c (NFSv4: Add ACCESS operation to
OPEN compound)
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The OPEN operation has no way to differentiate an open for read and an
open for execution - both look like read to the server. This allowed
users to read files that didn't have READ access but did have EXEC access,
which is obviously wrong.
This patch adds an ACCESS call to the OPEN compound to handle the
difference between OPENs for reading and execution. Since we're going
through the trouble of calling ACCESS, we check all possible access bits
and cache the results hopefully avoiding an ACCESS call in the future.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We want to be able to pass on the information that the page was not
dirtied under a lock. Instead of adding a flag parameter, do this
by passing a pointer to a 'struct nfs_lock_owner' that may be NULL.
Also reuse this structure in struct nfs_lock_context to carry the
fl_owner_t and pid_t.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last
decode_* call must have succeeded.
Cc: stable@vger.kernel.org
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Pass the checks made by decode_getacl back to __nfs4_get_acl_uncached
so that it knows if the acl has been truncated.
The current overflow checking is broken, resulting in Oopses on
user-triggered nfs4_getfacl calls, and is opaque to the point
where several attempts at fixing it have failed.
This patch tries to clean up the code in addition to fixing the
Oopses by ensuring that the overflow checks are performed in
a single place (decode_getacl). If the overflow check failed,
we will still be able to report the acl length, but at least
we will no longer attempt to cache the acl or copy the
truncated contents to user space.
Reported-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Sachin Prabhu <sprabhu@redhat.com>
|
|
Instead of using the private field xdr->p from struct xdr_stream,
use the public xdr_stream_pos().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Resetting the cursor xdr->p to a previous value is not a safe
practice: if the xdr_stream has crossed out of the initial iovec,
then a bunch of other fields would need to be reset too.
Fix this issue by using xdr_enter_page() so that the buffer gets
page aligned at the bitmap _before_ we decode it.
Also fix the confusion of the ACL length with the page buffer length
by not adding the base offset to the ACL length...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
|
|
Otherwise we break backwards compatibility when v4 becomes a modules.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
fl_type is not a bitmap.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
