aboutsummaryrefslogtreecommitdiff
path: root/fs/cifs/smb2ops.c
AgeCommit message (Collapse)Author
2013-11-19Check SMB3 dialects against downgrade attacksSteve French
When we are running SMB3 or SMB3.02 connections which are signed we need to validate the protocol negotiation information, to ensure that the negotiate protocol response was not tampered with. Add the missing FSCTL which is sent at mount time (immediately after the SMB3 Tree Connect) to validate that the capabilities match what we think the server sent. "Secure dialect negotiation is introduced in SMB3 to protect against man-in-the-middle attempt to downgrade dialect negotiation. The idea is to prevent an eavesdropper from downgrading the initially negotiated dialect and capabilities between the client and the server." For more explanation see 2.2.31.4 of MS-SMB2 or http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-18CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large filesSteve French
This third version of the patch, incorparating feedback from David Disseldorp extends the ability of copychunk (refcopy) over smb2/smb3 mounts to handle servers with smaller than usual maximum chunk sizes and also fixes it to handle files bigger than the maximum chunk sizes In the future this can be extended further to handle sending multiple chunk requests in on SMB2 ioctl request which will further improve performance, but even with one 1MB chunk per request the speedup on cp is quite large. Reviewed-by: David Disseldorp <ddiss@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-14CIFS: SMB2/SMB3 Copy offload support (refcopy) phase 1Steve French
This first patch adds the ability for us to do a server side copy (ie fast copy offloaded to the server to perform, aka refcopy) "cp --reflink" of one file to another located on the same server. This is much faster than traditional copy (which requires reading and writing over the network and extra memcpys). This first version is not going to be copy files larger than about 1MB (to Samba) until I add support for multiple chunks and for autoconfiguring the chunksize. It includes: 1) processing of the ioctl 2) marshalling and sending the SMB2/SMB3 fsctl over the network 3) simple parsing of the response It does not include yet (these will be in followon patches to come soon): 1) support for multiple chunks 2) support for autoconfiguring and remembering the chunksize 3) Support for the older style copychunk which Samba 4.1 server supports (because this requires write permission on the target file, which cp does not give you, apparently per-posix). This may require a distinct tool (other than cp) and other ioctl to implement. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02Query network adapter info at mount time for debuggingSteve French
When CONFIG_CIFS_STATS2 enabled query adapter info for debugging It is easy now in SMB3 to query the information about the server's network interfaces (and at least Windows 8 and above do this, if not other clients) there are some useful pieces of information you can get including: - all of the network interfaces that the server advertises (not just the one you are mounting over), and with SMB3 supporting multichannel this helps with more than just failover (also aggregating multiple sockets under one mount) - whether the adapter supports RSS (useful to know if you want to estimate whether setting up two or more socket connections to the same address is going to be faster due to RSS offload in the adapter) - whether the server supports RDMA - whether the server has IPv6 interfaces (if you connected over IPv4 but prefer IPv6 e.g.) - what the link speed is (you might want to reconnect over a higher speed interface if available) (Of course we could also rerequest this on every mount cheaplly to the same server, as Windows apparently does, so we can update the adapter info on new mounts, and also on every reconnect if the network interface drops temporarily - so we don't have to rely on info from the first mount to this server) It is trivial to request this information - and certainly will be useful when we get to the point of doing multichannel (and eventually RDMA), but some of this (linkspeed etc.) info may help for debugging in the meantime. Enable this request when CONFIG_CIFS_STATS2 is on (only for smb3 mounts since it is an SMB3 or later ioctl). Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02Query File System AlignmentSteven French
In SMB3 it is now possible to query the file system alignment info, and the preferred (for performance) sector size and whether the underlying disk has no seek penalty (like SSD). Query this information at mount time for SMB3, and make it visible in /proc/fs/cifs/DebugData for debugging purposes. This alignment information and preferred sector size info will be helpful for the copy offload patches to setup the right chunks in the CopyChunk requests. Presumably the knowledge that the underlying disk is SSD could also help us make better readahead and writebehind decisions (something to look at in the future). Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02Query device characteristics at mount time from server on SMB2/3 not just on ↵Steven French
cifs mounts Currently SMB2 and SMB3 mounts do not query the device information at mount time from the server as is done for cifs. These can be useful for debugging. This is a minor patch, that extends the previous one (which added ability to query file system attributes at mount time - this returns the device characteristics - also via in /proc/fs/cifs/DebugData) Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-28Query file system attributes from server on SMB2, not just cifs, mountsSteve French
Currently SMB2 and SMB3 mounts do not query the file system attributes from the server at mount time as is done for cifs. These can be useful for debugging. Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-28Allow setting per-file compression via SMB2/3Steve French
Allow cifs/smb2/smb3 to return whether or not a file is compressed via lsattr, and allow SMB2/SMB3 to set the per-file compression flag ("chattr +c filename" on an smb3 mount). Windows users often set the compressed flag (it can be done from the desktop and file manager). David Disseldorp has patches to Samba server to support this (at least on btrfs) which are complementary to this Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Respect epoch value from create lease context v2Pavel Shilovsky
that force a client to purge cache pages when a server requests it. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Add create lease v2 context for SMB3Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Move parsing lease buffer to ops structPavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Move creating lease buffer to ops structPavel Shilovsky
to make adding new types of lease buffers easier. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09CIFS: Store lease state itself rather than a mapped oplock valuePavel Shilovsky
and separate smb20_operations struct. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Replace clientCanCache* bools with an integerPavel Shilovsky
that prepare the code to handle different types of SMB2 leases. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08CIFS: Implement follow_link for SMB2Pavel Shilovsky
that allows to access files through symlink created on a server. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-10CIFS: Reconnect durable handles for SMB2Pavel Shilovsky
On reconnects, we need to reopen file and then obtain all byte-range locks held by the client. SMB2 protocol provides feature to make this process atomic by reconnecting to the same file handle with all it's byte-range locks. This patch adds this capability for SMB2 shares. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-07-10CIFS: Make SMB2_open use cifs_open_parms structPavel Shilovsky
to prepare it for further durable handle reconnect processing. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-07-10CIFS: Respect create_options in smb2_open_filePavel Shilovsky
and eliminated unused file_attribute parms of SMB2_open. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-06-27cifs: fix SMB2 signing enablement in cifs_enable_signingJeff Layton
Commit 9ddec56131 (cifs: move handling of signed connections into separate function) broke signing on SMB2/3 connections. While the code to enable signing on the connections was very similar between the two, the bits that get set in the sec_mode are different. Declare a couple of new smb_version_values fields and set them appropriately for SMB1 and SMB2/3. Then change cifs_enable_signing to use those instead. Reported-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-27[CIFS] Fix build warningSteve French
Fix build warning in Shirish's recent SMB3 signing patch which occurs when SMB2 support is disabled in Kconfig. fs/built-in.o: In function `cifs_setup_session': >> (.text+0xa1767): undefined reference to `generate_smb3signingkey' Pointed out by: automated 0-DAY kernel build testing backend Intel Open Source Technology Center CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-26Remove typoSteve French
Cut and paste likely introduced accidentally inserted spurious #define in d60622eb5a23904facf4a4efac60f5bfa810d7d4 causes no harm but looks weird Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24Add ability to dipslay SMB3 share flags and capabilities for debuggingSteve French
SMB3 protocol adds various optional per-share capabilities (and SMB3.02 adds one more beyond that). Add ability to dump (/proc/fs/cifs/DebugData) the share capabilities and share flags to improve debugging. Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-24Add SMB3.02 dialect supportSteve French
The new Windows update supports SMB3.02 dialect, a minor update to SMB3. This patch adds support for mounting with vers=3.02 Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com>
2013-05-04[CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches
It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2013-03-06CIFS: Fix missing of oplock_read value in smb30_values structurePavel Shilovsky
Cc: stable@vger.kernel.org Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-01-01CIFS: Don't let read only caching for mandatory byte-range locked filesPavel Shilovsky
If we have mandatory byte-range locks on a file we can't cache reads because pagereading may have conflicts with these locks on the server. That's why we should allow level2 oplocks for files without mandatory locks only. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-09Do not send SMB2 signatures for SMB3 framesSteve French
Restructure code to make SMB2 vs. SMB3 signing a protocol specific op. SMB3 signing (AES_CMAC) is not enabled yet, but this restructuring at least makes sure we don't send an smb2 signature on an smb3 signed connection. A followon patch will add AES_CMAC and enable smb3 signing. Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Jeff Layton <jlayton@samba.org>
2012-12-05Add SMB2.02 dialect supportSteve French
This patch enables optional for original SMB2 (SMB2.02) dialect by specifying vers=2.0 on mount. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05CIFS: Make use of common cifs_build_path_to_root for CIFS and SMB2Steve French
because the is no difference here. This also adds support of prefixpath mount option for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-10-01[CIFS] Fix SMB2 negotiation support to select only one dialect (based on vers=)Steve French
Based on whether the user (on mount command) chooses: vers=3.0 (for smb3.0 support) vers=2.1 (for smb2.1 support) or (with subsequent patch, which will allow SMB2 support) vers=2.0 (for original smb2.02 dialect support) send only one dialect at a time during negotiate (we had been sending a list). Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-26CIFS: Make ops->close return voidPavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24Trivial endian fixesSteve French
Some trivial endian fixes for the SMB2 code. One warning remains which I asked Pavel to look at. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add SMB2.1 lease break supportPavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Request SMB2.1 leasesPavel Shilovsky
if server supports them and we need oplocks. Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Use brlock cache for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24CIFS: Add brlock support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru>
2012-09-24CIFS: Handle SMB2 lock flagsPavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-09-24cifs: remove kmap lock and rsize limitJeff Layton
Now that we aren't abusing the kmap address space, there's no need for this lock or to impose a limit on the rsize. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-09-24cifs: remove the kmap size limit from wsizeJeff Layton
Now that we're not kmapping so much at once, there's no need to cap the wsize at the amount that can be simultaneously kmapped. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add statfs support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add oplock break support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Process oplocks for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add readdir support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add set_file_info support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add SMB2 support for set_file_sizePavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add SMB2 support for hardlink operationPavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add SMB2 support for rename operationPavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add writepage support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add readpage support for SMB2Pavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24CIFS: Add SMB2 support for cifs_iovec_writePavel Shilovsky
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>