aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-10-13V4L: copy-paste bug in videodev.cSascha Hauer
This patch fixes a copy-paste bug in videodev.c where the vidioc_qbuf() function gets called for the dqbuf ioctl. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13bcm43xx: fix regressions in 2.6.18Larry Finger
The bcm43xx code in 2.6.18 has a serious problems not found in 2.6.17, due to a change in the locking mechanism introduced to reduce latency. The following patch fixes the problems in locking, reduces the latency associated with the periodic work tasklet, and contains code needed for those cards that use 64-bit DMA. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13ide-generic: jmicron fixAlan Cox
Some people find their Jmicron pata port reports its disabled even though it has devices on it and was boot probed. Fix this (Candidate for 2.6.18.*, less so for 2.6.19 as we've got a proper jmicron driver on the merge for that to replace ide-generic support) From: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13scx200_hrt: fix precedence bug manifesting as 27x clock in 1 MHz modeJim Cromie
Fix paren-placement / precedence bug breaking initialization for 1 MHz clock mode. Also fix comment spelling error, and fence-post (off-by-one) error on symbol used in request_region. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=7242 Thanks alexander.krause@erazor-zone.de, dzpost@dedekind.net, for the reports and patch test, and phelps@mantara.com for the independent patch and verification. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: <alexander.krause@erazor-zone.de> Cc: <dzpost@dedekind.net> Cc: <phelps@mantara.com> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13rtc driver rtc-pcf8563 century bit inversedJean-Baptiste Maneyrol
The century bit PCF8563_MO_C in the month register is misinterpreted. It is set to 1 for the 20th century and 0 for 21th, and the driver is expecting the opposite behavior. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13fbdev: correct buffer size limit in fbmem_read_proc()Geert Uytterhoeven
Address http://bugzilla.kernel.org/show_bug.cgi?id=7189 It should check `clen', not `len'. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <jurij@wooyd.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13MD: Fix problem where hot-added drives are not resynced.Neil Brown
If a drive is added with HOT_ADD_DISK rather than ADD_NEW_DISK, saved_raid_disk isn't initialised properly, and the drive can be included in the array without a resync. From: Neil Brown <neilb@suse.de> Cc: <syrius.ml@no-log.org> Cc: Richard Bollinger <rabollinger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13sata_mv: fix oopsJeff Garzik
From: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13CPUFREQ: Fix some more CPU hotplug locking.Dave Jones
[CPUFREQ] Fix some more CPU hotplug locking. Lukewarm IQ detected in hotplug locking BUG: warning at kernel/cpu.c:38/lock_cpu_hotplug() [<b0134a42>] lock_cpu_hotplug+0x42/0x65 [<b02f8af1>] cpufreq_update_policy+0x25/0xad [<b0358756>] kprobe_flush_task+0x18/0x40 [<b0355aab>] schedule+0x63f/0x68b [<b01377c2>] __link_module+0x0/0x1f [<b0119e7d>] __cond_resched+0x16/0x34 [<b03560bf>] cond_resched+0x26/0x31 [<b0355b0e>] wait_for_completion+0x17/0xb1 [<f965c547>] cpufreq_stat_cpu_callback+0x13/0x20 [cpufreq_stats] [<f9670074>] cpufreq_stats_init+0x74/0x8b [cpufreq_stats] [<b0137872>] sys_init_module+0x91/0x174 [<b0102c81>] sysenter_past_esp+0x56/0x79 As there are other places that call cpufreq_update_policy without the hotplug lock, it seems better to keep the hotplug locking at the lower level for the time being until this is revamped. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13Fix VIDIOC_ENUMSTD bugJonathan Corbet
The v4l2 API documentation for VIDIOC_ENUMSTD says: To enumerate all standards applications shall begin at index zero, incrementing by one until the driver returns EINVAL. The actual code, however, tests the index this way: if (index<=0 || index >= vfd->tvnormsize) { ret=-EINVAL; So any application which passes in index=0 gets EINVAL right off the bat - and, in fact, this is what happens to mplayer. So I think the following patch is called for, and maybe even appropriate for a 2.6.18.x stable release. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13backlight: fix oops in __mutex_lock_slowpath during head ↵Michael Hanselmann
/sys/class/graphics/fb0/* Seems like not all drivers use the framebuffer_alloc() function and won't have an initialized mutex. But those don't have a backlight, anyway. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Olaf Hering <olaf@aepfle.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Daniel R Thompson <daniel.thompson@st.com> Cc: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13rtc: lockdep fix/workaroundPeter Zijlstra
BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted) [<c04051ee>] show_trace_log_lvl+0x58/0x171 [<c0405802>] show_trace+0xd/0x10 [<c040591b>] dump_stack+0x19/0x1b [<c043abee>] trace_hardirqs_on+0xa2/0x11e [<c06143c3>] _spin_unlock_irq+0x22/0x26 [<c0541540>] rtc_get_rtc_time+0x32/0x176 [<c0419ba4>] hpet_rtc_interrupt+0x92/0x14d [<c0450f94>] handle_IRQ_event+0x20/0x4d [<c0451055>] __do_IRQ+0x94/0xef [<c040678d>] do_IRQ+0x9e/0xbd [<c0404a49>] common_interrupt+0x25/0x2c DWARF2 unwinder stuck at common_interrupt+0x25/0x2c Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13powerpc: Fix ohare IDE irq workaround on old powermacsBenjamin Herrenschmidt
Looks like a workaround for old bogus OF bitrot... This fixes it and hence fixes boot on some performa machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13sky2 network driver device idsStephen Hemminger
This makes the id table match the current netdev upstream tree. From: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13sky2: tx pause bug fixStephen Hemminger
The sky2 driver will hang if transmit flow control is enabled and it receives a pause frame. The pause frame gets partially processed by hardware but never makes it through to the correct logic. This patch made it into 2.6.17 stable, but never got accepted for 2.6.18, so it will have to go into 2.6.18.1 See also: http://bugzilla.kernel.org/show_bug.cgi?id=6839 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13netdrvr: lp486e: fix typoJeff Garzik
inside #if 0'd code, but it bugged me. Really, we should probably just delete the driver. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13mv643xx_eth: fix obvious typo, which caused build breakageJeff Garzik
The last minute fix submitted by the author fixed a bug, but broke the driver build. Noticed by Al Viro, since I can't build on said platform. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13USB: Allow compile in g_ether, fix typoTony Lindgren
Allows compiling g_ether in and fixes a typo with MUSB_HDRC Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13IB/mthca: Fix lid used for sending trapsJack Morgenstein
The SM LID used to send traps to is incorrectly set to port LID. This is a regression from 2.6.17 -- after a PortInfo MAD is received, no traps are sent to the SM LID. The traps go to the loopback interface instead, and are dropped there. The SM LID should be taken from the sm_lid of the PortInfo response. The bug was introduced by commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5: IB/mthca: Add client reregister event generation Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13zd1211rw: ZD1211B ASIC/FWT, not jointly decoderDaniel Drake
The vendor driver chooses this value based on an ifndef ASIC, and ASIC is never defined. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13V4L: pvrusb2: Limit hor res for 24xxx devicesMike Isely
Currently it is not understood how to properly control the horizontal capture resolution on 24xxx devices. The pvrusb2 driver is doing everything it should (pass resolution paramter(s) to cx2341x and cx25840 modules) but for some reason the result is corrupted video if any resolution other than 720 is used. This patch causes the driver to only permit a horizontal resolution of 720 to be used on 24xxx devices. Even if the app requests something else, the driver will force the resolution back to 720. This patch still allows full control of the resolution for 29xxx devices. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13V4L: pvrusb2: Suppress compiler warningMike Isely
The pvrusb2 driver needs to call video_devdata() in order to correctly transform a file pointer into a video_device pointer. Unfortunately the prototype for this function has been marked V4L1-only and there's no official substitute that I can find for V4L2. Adding to the mystery is that the implementation for this function exists whether or not V4L1 compatibility has been selected. The upshot of all this is that we get a compilation warning here about a missing prototype but the code links OK. This fix solves the warning by copying the prototype into the source file that is using it. Yes this is a hack, but it's a safe one for 2.6.18 (any alternative would be much more intrusive). A better solution should be forthcoming for the next kernel. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13V4L: pvrusb2: improve 24XXX config option descriptionMike Isely
The CONFIG_VIDEO_PVRUSB2_24XXX is not nearly as "experimental" as the description suggests. So refine the description to better match reality. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13V4L: pvrusb2: Solve mutex deadlockMike Isely
There is a mutex ordering problem between the pvrusb2 driver and the v4l core. Two different pathways take mutexes in opposing orders and this (under rare circumstances) can cause a deadlock. The two mutexes in question are videodev_lock in the v4l core and device_lock inside the pvrusb2 driver. The device_lock instance in the driver protects a private global array of context pointers which had been implemented in advance of v4l core changes which eliminate the video_set_drvdata() and video_get_drvdata() functions. This patch restores the use of video_get_drvdata() and video_set_drvdata(), eliminating the need for the array and the mutex. (This is actually a patch to restore the previous implementation.) We can do this for 2.6.18 since those functions are in fact still present. A better (and larger) solution will be done for later kernels. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13DVB: cx24123: fix PLL divisor setupYeasah Pell
The cx24109 datasheet says: "NOTE: if A=0, then N=N+1" The current code is the result of a misinterpretation of the datasheet to mean exactly the opposite of the requirement -- The actual value of N is 1 greater than the value written when A is 0, so 1 needs to be *subtracted* from it to compensate. Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13V4L: Fix msp343xG handling regressionHans Verkuil
The msp3430G and msp3435G models cannot do Automatic Standard Detection, so these should be forced to BTSC. These chips are early production versions for the msp34xxG series and are quite rare. The workaround for kernel 2.6.18 is to use 'standard=32' as msp3400 module option. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-19[ATM]: [he] don't hold the device lock when upcallingChas Williams
This can create a deadlock/lock ordering problem with other layers that want to use the transmit (or other) path of the card at that time. Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-19Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD] Use SEEK_{SET,CUR,END} instead of hardcoded values in mtdchar lseek() MTD: Fix bug in fixup_convert_atmel_pri [JFFS2][SUMMARY] Fix a summary collecting bug. [PATCH] [MTD] DEVICES: Fill more device IDs in the structure of m25p80 MTD: Add lock/unlock operations for Atmel AT49BV6416 MTD: Convert Atmel PRI information to AMD format fs/jffs2/xattr.c: remove dead code [PATCH] [MTD] Maps: Add dependency on alternate probe methods to physmap [PATCH] MTD: Add Macronix MX29F040 to JEDEC [MTD] Fixes of performance and stability issues in CFI driver. block2mtd.c: Make kernel boot command line arguments work (try 4) [MTD NAND] Fix lookup error in nand_get_flash_type() remove #error on !PCI from pmc551.c MTD: [NAND] Fix the sharpsl driver after breakage from a core conversion [MTD] NAND: OOB buffer offset fixups make fs/jffs2/nodelist.c:jffs2_obsolete_node_frag() static [PATCH] [MTD] NAND: fix dead URL in Kconfig
2006-09-18Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM] CLIP: Do not refer freed skbuff in clip_mkip(). [NET]: Drop tx lock in dev_watchdog_up [PACKET]: Don't truncate non-linear skbs with mmaped IO [NET]: Mark frame diverter for future removal. [NETFILTER]: Add secmark headers to header-y [ATM]: linux-atm-general mailing list is subscribers only [ATM]: [he] when transmit fails, unmap the dma regions [TCP] tcp-lp: update information to MAINTAINERS [TCP] tcp-lp: bug fix for oops in 2.6.18-rc6 [BRIDGE]: random extra bytes on STP TCN packet [IPV6]: Accept -1 for IPV6_TCLASS [IPV6]: Fix tclass setting for raw sockets. [IPVS]: remove the debug option go ip_vs_ftp [IPVS]: Make sure ip_vs_ftp ports are valid [IPVS]: auto-help for ip_vs_ftp [IPVS]: Document the ports option to ip_vs_ftp in kernel-parameters.txt [TCP]: Turn ABC off. [NEIGH]: neigh_table_clear() doesn't free stats
2006-09-18Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Fix regression in sys_getdomainname() [OPENPROMIO]: Handle current_node being NULL correctly.
2006-09-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3815/1: headers_install support for ARM [ARM] 3794/1: S3C24XX: do not defined set_irq_wake when no CONFIG_PM [ARM] 3793/1: S3C2412: fix wrong serial info struct [ARM] 3780/1: Fix iop321 cpuid [ARM] 3786/1: pnx4008: update defconfig [ARM] 3785/1: S3C2412: Fix idle code as default uses wrong clocks [ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413
2006-09-18[ARM] 3793/1: S3C2412: fix wrong serial info structBen Dooks
Patch from Ben Dooks The S3C2440 serial info struct is being passed through the S3C2412 serial info struct probe routine. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Glexiner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-18[OPENPROMIO]: Handle current_node being NULL correctly.David S. Miller
If the user tries to traverse to the next node of the last node, we get NULL in current_node and a zero phandle returned. That's fine, but if the user tries to obtain properties in that state, we try to dereference a NULL pointer in the downcall to the of_*() routines. So protect against that. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-17[ATM]: [he] when transmit fails, unmap the dma regionsChas Williams
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-17[MTD] Use SEEK_{SET,CUR,END} instead of hardcoded values in mtdchar lseek()Josef 'Jeff' Sipek
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-17Merge branch 'master' into upstream-fixesJeff Garzik
2006-09-17[PATCH] s390: qeth driver fixes [6/6]Frank Pavlic
[PATCH 9/9] s390: qeth driver fixes [6/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Hipersockets has no IPV6 support, thus prevent issueing SETRTG_IPV6 control commands on Hipersockets devices. - fixed error handling in qeth_sysfs_(un)register Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [5/6]Frank Pavlic
[PATCH 8/9] s390: qeth driver fixes [5/6] From: Frank Pavlic <fpavlic@de.ibm.com> fix kernel panic in qdio queue handling. qeth_qdio_clear_card() could be invoked by 2 CPUs simultaneously (for example reboot event and recovery). Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [4/6]Frank Pavlic
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [3/6]Frank Pavlic
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [2/6]Frank Pavlic
[PATCH 5/9] s390: qeth driver fixes [2/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fixed error handling in create_device_attributes - fixed some minor bugs in IPv4 and IPv6 address checking Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [1/6]Frank Pavlic
[PATCH 4/9] s390: qeth driver fixes [1/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Drop incoming packets with vlan_tag set if card->vlangrp is not set. - use always vlan_hwaccel_rx to pass vlan frames to the stack. - fix recovery problem. Device was recovered properly but still not working. netif_carrier_on call right before recovery start fixes it. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: Makefile cleanupFrank Pavlic
[PATCH 3/9] s390: Makefile cleanup From: Frank Pavlic <fpavlic@de.ibm.com> remove CONFIG_MPC from Makefile which was introduced accidently in the past. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: netiucv driver fixesFrank Pavlic
[PATCH 2/9] s390: netiucv driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - missing lock initialization added - avoid duplicate iucv-interfaces to the same peer - rw-lock added for manipulating the list of defined iucv connections Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: minor s390 network driver fixesFrank Pavlic
Hi Jeff, this is a RESEND of the nine s390 network driver patches. I finally found that my kmail corrupted almost every patch I sent the last time. Please apply these 9 patches and forget about my first attempt! Sorry for the delay, I had some fights with sendmail, IMAP and mutt configuration. Frank [RESEND PATCH 1/9] s390: minor s390 network driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - iucv driver: use do { } while (0) constructs instead of empty defines to avoid compile bugs. - ctc driver: missing lock initialization added - lcs driver: BUG_ON usage was removed accidently with the last lcs patch. Put them back in place. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-16Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Increase the IB CM retry count in CMA IPoIB: Retry failed send-only multicast group joins IB/srp: Don't schedule reconnect from srp
2006-09-16[PATCH] MTD NAND: OOB buffer offset fixupsVitaly Wool
In the case of data-pad-ecc-pad-data... layout the oob start position has to be sizeof(data) in nand_write_oob_syndrom(). In nand_fill_oob() we need to copy to buf + buffer offset instead of buf + write offset. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16[PATCH] IPMI: fix handling of OEM flagsCorey Minyard
If one of the OEM flags becomes set in the flags from the hardware, the driver could hang if no OEM handler was set. Fix the code to handle this. This was tested by setting the flags by hand after they were fetched. Signed-off-by: Corey Minyard <minyard@acm.org> Ackde-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16[PATCH] hvc_console suspend fixAndrew Morton
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7152 Cc: Michael Tautschnig <tautschn@model.in.tum.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16[PATCH] IPMI: Fix oops on ipmi_msghandler removal for non ipmi systemsArnaud Patard
When the ipmi_si module is loaded on a system without any ipmi device, it fails with nodev. It would be fine if all resources were freed. A call to device_unregister() is missing, resulting to a oops when you remove the ipmi_msghandler. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-17 04:34:39 +0000