aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-12-23isp1704_charger: Add DT supportSebastian Reichel
This patch introduces device tree support to the isp1704 charger driver. Adding support involved moving the handling of the enable GPIO from board code into the driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23charger-manager: of_cm_parse_desc() should be staticAnton Vorontsov
Fixes the following warning: drivers/power/charger-manager.c:1539:21: warning: symbol 'of_cm_parse_desc' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23bq2415x_charger: Add DT supportSebastian Reichel
This adds DT support to the bq2415x driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23power_supply: Add power_supply_get_by_phandleSebastian Reichel
Add method to get power supply by device tree phandle. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23bq2415x_charger: Use power_supply notifier for automodePali Rohár
This patch removing set_mode_hook function from board data and replacing it with new string variable of notifier power supply device. After this change it is possible to add DT support because driver does not need specific board function anymore. Only static data and name of power supply device is required. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23power: reset: Add as3722 power-off driverLaxman Dewangan
ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23charger-manager: Support deivce tree in charger manager driverJonghwa Lee
Charger-manager can parse charger_desc data from devicetree which is used to register charger manager. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23charger-manager: Modify the way of checking battery's temperatureJonghwa Lee
Charger-manager driver used to check battery temperature through the callback function passed by platform data. Unfortunatley, without that pre-defined callback function, charger-manager can't get battery's temperature at all. Also passing callback function through platform data ruins DT support for charger-manager. This patch mondifies charger-manager driver to get temperature of battery without pre-defined callback function. Now, charger-manager can use either of battery thermometer in fuel-gauge and ouside of battery. It uses thermal framework interface for outer thermometer if thermal fw is enabled. Otherwise, it tries to use fuel-gauge's through the power supply interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01power_supply: Add power_supply notifierPali Rohár
This patch adds a notifier chain to the power_supply, this helps drivers in other subsystem to listen to changes in power supply subsystem. This would help to take some actions in those drivers on changing the power supply properties. One such scenario is to increase/decrease system performance based on the battery capacity/voltage. Another scenario is to adjust the h/w peak current detection voltage/current thresholds based on battery voltage/capacity. The notifier helps drivers to listen to changes in power_suppy susbystem without polling the power_supply properties Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01max17042_battery: Fix build errors caused by missing REGMAP_I2C configAustin Boyle
max17042 now uses regmap interface but does not enable config option. This patch fixes the following build errors: drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function) drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c: In function ‘max17042_probe’: drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’ Signed-off-by: Austin Boyle <boyle.austin@gmail.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activateShuah Khan
power_supply_register() calls device_init_wakeup() to register a wakeup source before initializing dev_name. As a result, device_wakeup_enable() end up registering wakeup source with a null name when wakeup_source_register() gets called with dev_name(dev) which is null at the time. When kernel is booted with wakeup_source_activate enabled, it will panic when the trace point code tries to dereference ws->name. Fixed the problem by moving up the kobject_set_name() call prior to accesses to dev_name(). Replaced kobject_set_name() with dev_set_name() which is the right interface to be called from drivers. Fixed the call to device_del() prior to device_add() in for wakeup_init_failed error handling code. Trace after the change: bash-2143 [003] d... 132.280697: wakeup_source_activate: BAT1 state=0x20001 kworker/3:2-1169 [003] d... 132.281305: wakeup_source_deactivate: BAT1 state=0x30000 Oops message: [ 819.769934] device: 'BAT1': device_add [ 819.770078] PM: Adding info for No Bus:BAT1 [ 819.770235] BUG: unable to handle kernel NULL pointer dereference at (null) [ 819.770435] IP: [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.770572] PGD 3efd90067 PUD 3eff61067 PMD 0 [ 819.770716] Oops: 0000 [#1] SMP [ 819.770829] Modules linked in: arc4 iwldvm mac80211 x86_pkg_temp_thermal coretemp kvm_intel joydev i915 kvm uvcvideo ghash_clmulni_intel videobuf2_vmalloc aesni_intel videobuf2_memops videobuf2_core aes_x86_64 ablk_helper cryptd videodev iwlwifi lrw rfcomm gf128mul glue_helper bnep btusb media bluetooth parport_pc hid_generic ppdev snd_hda_codec_hdmi drm_kms_helper snd_hda_codec_realtek cfg80211 drm tpm_infineon samsung_laptop snd_hda_intel usbhid snd_hda_codec hid snd_hwdep snd_pcm microcode snd_page_alloc snd_timer psmouse i2c_algo_bit lpc_ich tpm_tis video wmi mac_hid serio_raw ext2 lp parport r8169 mii [ 819.771802] CPU: 0 PID: 2167 Comm: bash Not tainted 3.12.0+ #25 [ 819.771876] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D/SAMSUNG_NP1234567890, BIOS P03AAC 07/12/2012 [ 819.772022] task: ffff88002e6ddcc0 ti: ffff8804015ca000 task.ti: ffff8804015ca000 [ 819.772119] RIP: 0010:[<ffffffff813381c0>] [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.772242] RSP: 0018:ffff8804015cbc70 EFLAGS: 00010046 [ 819.772310] RAX: 0000000000000003 RBX: ffff88040cfd6d40 RCX: 0000000000000018 [ 819.772397] RDX: 0000000000020001 RSI: 0000000000000000 RDI: 0000000000000000 [ 819.772484] RBP: ffff8804015cbcc0 R08: 0000000000000000 R09: ffff8803f0768d40 [ 819.772570] R10: ffffea001033b800 R11: 0000000000000000 R12: ffffffff81c519c0 [ 819.772656] R13: 0000000000020001 R14: 0000000000000000 R15: 0000000000020001 [ 819.772744] FS: 00007ff98309b740(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 [ 819.772845] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 819.772917] CR2: 0000000000000000 CR3: 00000003f59dc000 CR4: 00000000001407f0 [ 819.773001] Stack: [ 819.773030] ffffffff81114003 ffff8804015cbcb0 0000000000000000 0000000000000046 [ 819.773146] ffff880409757a18 ffff8803f065a160 0000000000000000 0000000000020001 [ 819.773273] 0000000000000000 0000000000000000 ffff8804015cbce8 ffffffff8143e388 [ 819.773387] Call Trace: [ 819.773434] [<ffffffff81114003>] ? ftrace_raw_event_wakeup_source+0x43/0xe0 [ 819.773520] [<ffffffff8143e388>] wakeup_source_report_event+0xb8/0xd0 [ 819.773595] [<ffffffff8143e3cd>] __pm_stay_awake+0x2d/0x50 [ 819.773724] [<ffffffff8153395c>] power_supply_changed+0x3c/0x90 [ 819.773795] [<ffffffff8153407c>] power_supply_register+0x18c/0x250 [ 819.773869] [<ffffffff813d8d18>] sysfs_add_battery+0x61/0x7b [ 819.773935] [<ffffffff813d8d69>] battery_notify+0x37/0x3f [ 819.774001] [<ffffffff816ccb7c>] notifier_call_chain+0x4c/0x70 [ 819.774071] [<ffffffff81073ded>] __blocking_notifier_call_chain+0x4d/0x70 [ 819.774149] [<ffffffff81073e26>] blocking_notifier_call_chain+0x16/0x20 [ 819.774227] [<ffffffff8109397a>] pm_notifier_call_chain+0x1a/0x40 [ 819.774316] [<ffffffff81095b66>] hibernate+0x66/0x1c0 [ 819.774407] [<ffffffff81093931>] state_store+0x71/0xa0 [ 819.774507] [<ffffffff81331d8f>] kobj_attr_store+0xf/0x20 [ 819.774613] [<ffffffff811f8618>] sysfs_write_file+0x128/0x1c0 [ 819.774735] [<ffffffff8118579d>] vfs_write+0xbd/0x1e0 [ 819.774841] [<ffffffff811861d9>] SyS_write+0x49/0xa0 [ 819.774939] [<ffffffff816d1052>] system_call_fastpath+0x16/0x1b [ 819.775055] Code: 89 f8 48 89 e5 f6 82 c0 a6 84 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 a6 84 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80 [ 819.775760] RIP [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.775881] RSP <ffff8804015cbc70> [ 819.775949] CR2: 0000000000000000 [ 819.794175] ---[ end trace c4ef25127039952e ]--- Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "One performance improvement and a few bug fixes. Two of the fixes deal with the clock related problems we have seen on recent kernels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: handle asce-type exceptions as normal page fault s390,time: revert direct ktime path for s390 clockevent device s390/time,vdso: convert to the new update_vsyscall interface s390/uaccess: add missing page table walk range check s390/mm: optimize copy_page s390/dasd: validate request size before building CCW/TCW request s390/signal: always restore saved runtime instrumentation psw bit
2013-11-29Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some easy but needed fixes for i2c drivers since rc1" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm2835: Linking platform nodes to adapter nodes i2c: omap: raw read and write endian fix i2c: i2c-bcm-kona: Fix module build i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C i2c: bcm-kona: remove duplicated include i2c: davinci: raw read and write endian fix
2013-11-29Merge branch 'for-3.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "libata device removal path was removing parent device node before its child, which is mostly harmless but triggers warning after recent sysfs changes. Rafael's patch fixes the order. Other than that, minor controller-specific fixes and device ID additions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ATA: Fix port removal ordering ahci: add Marvell 9230 to the AHCI PCI device list ata: fix acpi_bus_get_device() return value check pata_arasan_cf: add missing clk_disable_unprepare() on error path ahci: add support for IBM Akebono platform device
2013-11-29Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm qxl leak fix from Dave Airlie: "As usual 5 mins after I send a trivial pull fix I find a real bug! This fixes a memory leak and I'd like to get it into stable queue asap" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: fix memory leak in release list handling
2013-11-29drm/qxl: fix memory leak in release list handlingDave Airlie
wow no idea how I got this far without seeing this, leaking the entries in the list makes kmalloc-64 slab grow. References: https://bugzilla.kernel.org/show_bug.cgi?id=65121 Cc: stable@vger.kernel.org Reported-by: Matthew Stapleton <matthew4196@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-28Merge tag 'gpio-v3.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here us a bunch of patches for the v3.13 series. Most important stuff is related to fixes and documentation for the new GPIO descriptor API. If the diffstat is scary you'll notice most of it is to Documentation/*: - A big slew of documentation for the gpiod transition that happened in the merge window, no semantic effect, but we should provide proper documentation with the new API. - Fix flags related to the new API. - Fix to the find_chip_by_name() lookup function related to the new API. - Fix of_find_gpio() when not using device tree. - Bug fix for the TB10x direction setting. - Error path fixes from Dan Carpenter. - Nasty IRQdomain bug relating to taking an unitialized spinlock. - Minor fixes here and there" * tag 'gpio-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm281xx: Fix return value of bcm_kona_gpio_get() gpio: pl061: move irqdomain initialization gpio: ucb1400: Add MODULE_ALIAS gpiolib: fix of_find_gpio() when OF not defined gpio: fix memory leak in error path gpio: rcar: NULL dereference on error in probe() gpio: msm: make msm_gpio.summary_irq signed for error handling gpio: mvebu: make mvchip->irqbase signed for error handling gpiolib: use dedicated flags for GPIO properties gpiolib: fix find_chip_by_name() Documentation: gpiolib: document new interface gpio: tb10x: Set output value before setting direction to output
2013-11-28Merge tag 'md/3.13-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md fixes from Neil Brown: "Three bug fixes for md in 3.13-rc All recent regressions, one in 3.12 so marked for -stable" * tag 'md/3.13-fixes' of git://neil.brown.name/md: md/raid5: fix newly-broken locking in get_active_stripe. md: test mddev->flags more safely in md_check_recovery. md/raid5: fix new memory-reference bug in alloc_thread_groups.
2013-11-28i2c: bcm2835: Linking platform nodes to adapter nodesFlorian Meier
In order to find I2C devices in the device tree, the platform nodes have to be known by the I2C core. This requires setting the dev.of_node parameter of the adapter. Signed-off-by: Florian Meier <florian.meier@koalo.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Just two minor fixes as people keep resending since they are so low hanging" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/hwmon: fix compilation without CONFIG_HWMON drm/sysfs: fix OOM verification
2013-11-27Merge tag 'tty-3.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for reported issues in 3.13-rc2. The n_gsm "fix" was reverted as it was found to not be correct. Hopefully this will be resolved in a future pull request, but as there's really only one user of this line setting, it's not a big deal..." * tag 'tty-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "n_gsm: race between ld close and gsmtty open" n_tty: Protect minimum_to_wake reset for concurrent readers tty: Reset hupped state on open TTY: amiserial, add missing platform check TTY: pmac_zilog, check existence of ports in pmz_console_init() n_gsm: race between ld close and gsmtty open tty/serial/8250: fix typo in help text n_tty: Fix 4096-byte canonical reads n_tty: Fix echo overrun tail computation n_tty: Ensure reader restarts worker for next reader
2013-11-27Merge tag 'staging-3.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are a number of staging, and IIO driver, fixes for 3.13-rc2 that resolve issues that have been reported for 3.13-rc1. All of these have been in linux-next for a bit this week" * tag 'staging-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits) Staging: tidspbridge: disable driver staging: zsmalloc: Ensure handle is never 0 on success staging/lustre/ptlrpc: fix ptlrpc_stop_pinger logic staging: r8188eu: Fix AP mode Staging: btmtk_usb: Add hdev parameter to hdev->send driver callback Staging: go7007: fix up some remaining go->dev issues staging: imx-drm: Fix modular build of DRM_IMX_IPUV3 staging: ft1000: fix use of potentially uninitialized variable Revert "staging:media: Use dev_dbg() instead of pr_debug()" Staging: zram: Fix memory leak by refcount mismatch staging: vt6656: [BUG] Fix for TX USB resets from vendors driver. staging: nvec: potential NULL dereference on error path Staging: vt6655-6: potential NULL dereference in hostap_disable_hostapd() staging: comedi: s626: fix value written by s626_set_dac() Staging: comedi: pcl730: fix some bitwise vs logical AND bugs staging: comedi: fix potentially uninitialised variable iio:accel:kxsd9 fix missing mutex unlock iio: adc: ti_am335x_adc: avoid double free of buffer. staging:iio: Fix hmc5843 Kconfig dependencies iio: Fix tcs3472 Kconfig dependencies ...
2013-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix compat ioctl leak in uhid, by David Herrmann - fix scheduling in atomic context (causing actual lockups in real world) in hid-sony driver, by Sven Eckelmann - revert patch introducing VID/PID conflict, by Jiri Kosina - support from various new device IDs by Benjamin Tissoires and KaiChung Cheng * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: uhid: fix leak for 64/32 UHID_CREATE HID: kye: fix unresponsive keyboard HID: kye: Add report fixup for Genius Manticore Keyboard HID: multicouh: add PID VID to support 1 new Wistron optical touch device HID: appleir: force input to be set Revert "HID: wiimote: add LEGO-wiimote VID" HID: sony: Send FF commands in non-atomic context
2013-11-27Merge tag 'pm+acpi-3.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fix for a recent regression in the Tegra cpufreq driver causing excess error messages to be printed from Stephen Warren - ACPI-based device hotplug fix to prevent conflicting notify handlers from being installed for PCI host bridge objects. From Toshi Kani - ACPICA update to upstream version 20131115. This contains bug fixes mostly (loop termination fix for the get AML length function, fixes related to namespace node removal and debug output). From Bob Moore, Tomasz Nowicki and Lv Zheng - Removal of incorrect inclusions of internal ACPICA header files by non-ACPICA code from Lv Zheng - Fixes for the ACPI sysfs interface exposing tables to user space from Daisuke Hatayama and Jeremy Compostella - Assorted ACPI and cpufreq cleanups from Sachin Kamat and Al Stone - cpupower tool fix and man page from Thomas Renninger * tag 'pm+acpi-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Clean up incorrect inclusions of ACPICA headers tools: cpupower: fix wrong err msg not supported vs not available tools: cpupower: Add cpupower-idle-set(1) manpage ACPI / sysfs: Fix incorrect ACPI tables walk in acpi_tables_sysfs_init() ACPI / sysfs: Set file size for each exposed ACPI table ACPICA: Update version to 20131115. ACPICA: Add support to delete all objects attached to the root namespace node. ACPICA: Delete all attached data objects during namespace node deletion. ACPICA: Resources: Fix loop termination for the get AML length function. ACPICA: Tests: Add CHECKSUM_ABORT protection for test utilities. ACPICA: Debug output: Do not emit function nesting level for kernel build. ACPI / sleep: clean up compiler warning about uninitialized field cpufreq: exynos: Remove unwanted EXPORT_SYMBOL cpufreq: tegra: don't error target() when suspended ACPI / hotplug: Fix conflicted PCI bridge notify handlers
2013-11-28drm/nouveau/hwmon: fix compilation without CONFIG_HWMONIlia Mirkin
Reported-by: Jim Davis <jim.epost@gmail.com> Tested-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-28drm/sysfs: fix OOM verificationDavid Herrmann
Copy/Paste typo.. we need to test for ->kdev instead of ->dev. Reported-by: Juha Leppänen <juha_efku@dnainternet.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-27remove obsolete references to powertweakDave Jones
This tool hasn't been maintained in over a decade, and is pretty much useless these days. Let's pretend it never happened. Also remove a long-dead email address. Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "The main thing that caused problem was that CONFIG_CPU_LITTLE_ENDIAN got turned on with allyesconfig and such, which is not a very good idea especially since it requires a newer toolchain than what most people have. So we turned it into a choice instead that defaults to big endian" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/windfarm: Fix XServe G5 fan control Makefile issue arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow powerpc/signals: Improved mark VSX not saved with small contexts fix powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN powerpc: Fix error when cross building TAGS & cscope powerpc/booke: Only check for hugetlb in flush if vma != NULL powerpc/85xx: typo in dts: "interupt" (four devices) powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well
2013-11-28md/raid5: fix newly-broken locking in get_active_stripe.NeilBrown
commit 566c09c53455d7c4f1 raid5: relieve lock contention in get_active_stripe() modified the locking in get_active_stripe() reducing the range protected by the (highly contended) device_lock. Unfortunately it reduced the range too much opening up some races. One race can occur if get_priority_stripe runs between the test on sh->count and device_lock being taken. This will mean that sh->lru is not empty while get_active_stripe thinks ->count is zero resulting in a 'BUG' firing. Another race happens if __release_stripe is called immediately after sh->count is tested and found to be non-zero. If STRIPE_HANDLE is not set, get_active_stripe should increment ->active_stripes when it increments ->count from 0, but as it didn't think it was 0, it doesn't. Extending device_lock to cover the test on sh->count close these races. While we are here, fix the two BUG tests: -If count is zero, then lru really must not be empty, or we've lock the stripe_head somehow - no other tests are relevant. -STRIPE_ON_RELEASE_LIST is completely independent of ->lru so testing it is pointless. Reported-and-tested-by: Brassow Jonathan <jbrassow@redhat.com> Reviewed-by: Shaohua Li <shli@kernel.org> Fixes: 566c09c53455d7c4f1 Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-28md: test mddev->flags more safely in md_check_recovery.NeilBrown
commit 7a0a5355cbc71efa md: Don't test all of mddev->flags at once. made most tests on mddev->flags safer, but missed one. When commit 260fa034ef7a4ff8b7306 md: avoid deadlock when dirty buffers during md_stop. added MD_STILL_CLOSED, this caused md_check_recovery to misbehave. It can think there is something to do but find nothing. This can lead to the md thread spinning during array shutdown. https://bugzilla.kernel.org/show_bug.cgi?id=65721 Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Fixes: 260fa034ef7a4ff8b7306 Cc: stable@vger.kernel.org (3.12) Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-28md/raid5: fix new memory-reference bug in alloc_thread_groups.NeilBrown
In alloc_thread_groups, worker_groups is a pointer to an array, not an array of pointers. So worker_groups[i] is wrong. It should be &(*worker_groups)[i] Found-by: coverity Fixes: 60aaf9338545 Reported-by: Ben Hutchings <bhutchings@solarflare.com> Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-11-27ATA: Fix port removal orderingRafael J. Wysocki
After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) Mika Westerberg sees traces analogous to the one below in Thunderbolt hot-remove testing: WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0() sysfs group ffffffff81c6f1e0 not found for kobject 'host7' Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13 Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8 ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0 ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48 Call Trace: [<ffffffff817daab1>] dump_stack+0x45/0x56 [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50 [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70 [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0 [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50 [<ffffffff8142a0d0>] device_del+0x40/0x1b0 [<ffffffff8142a24d>] device_unregister+0xd/0x20 [<ffffffff8144131a>] scsi_remove_host+0xba/0x110 [<ffffffff8145f526>] ata_host_detach+0xc6/0x100 [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20 [<ffffffff812e8f48>] pci_device_remove+0x28/0x60 [<ffffffff8142d854>] __device_release_driver+0x64/0xd0 [<ffffffff8142d8de>] device_release_driver+0x1e/0x30 [<ffffffff8142d257>] bus_remove_device+0xf7/0x140 [<ffffffff8142a1b1>] device_del+0x121/0x1b0 [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0 [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0 [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0 [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20 [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0 [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0 [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0 [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0 [<ffffffff812fd90d>] hotplug_event+0xcd/0x160 [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60 [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22 [<ffffffff8105cf3a>] process_one_work+0x17a/0x430 [<ffffffff8105db29>] worker_thread+0x119/0x390 [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0 [<ffffffff81063a5d>] kthread+0xcd/0xf0 [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180 [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0 [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180 The source of this problem is that SCSI hosts are removed from ATA ports after calling ata_tport_delete() which removes the port's sysfs directory, among other things. Now, after commit bcdde7e221a8, the sysfs directory is removed along with all of its subdirectories that include the SCSI host's sysfs directory and its subdirectories at this point. Consequently, when device_del() is finally called for any child device of the SCSI host and tries to remove its "power" group (which is already gone then), it triggers the above warning. To make the warnings go away, change the removal ordering in ata_port_detach() so that the SCSI host is removed from the port before ata_tport_delete() is called. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281 Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-11-27i2c: omap: raw read and write endian fixVictor Kamensky
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-27Staging: tidspbridge: disable driverGreg Kroah-Hartman
There seems to be no active maintainer for the driver, and there is an unfixed security bug, so disable the driver for now. Hopefully someone steps up to be the maintainer, and works to get this out of staging, otherwise it will be deleted soon. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Omar Ramirez Luna <omar.ramirez@copitl.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Kanigeri, Hari <h-kanigeri2@ti.com> Cc: Ameya Palande <ameya.palande@nokia.com> Cc: Guzman Lugo, Fernando <fernando.lugo@ti.com> Cc: Hebbar, Shivananda <x0hebbar@ti.com> Cc: Ramos Falcon, Ernesto <ernesto@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Anna, Suman <s-anna@ti.com> Cc: Gupta, Ramesh <grgupta@ti.com> Cc: Gomez Castellanos, Ivan <ivan.gomez@ti.com> Cc: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Armando Uribe De Leon <x0095078@ti.com> Cc: Deepak Chitriki <deepak.chitriki@ti.com> Cc: Menon, Nishanth <nm@ti.com> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27gpio: bcm281xx: Fix return value of bcm_kona_gpio_get()Markus Mayer
We need to return the corresponding bit for a particular GPIO. This bit contains shift not mask. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27gpio: pl061: move irqdomain initializationLinus Walleij
The PL061 driver had the irqdomain initialization in an unfortunate place: when used with device tree (and thus passing the base IRQ 0) the driver would work, as this registers an irqdomain and waits for mappings to be done dynamically as the devices request their IRQs, whereas when booting using platform data the irqdomain core would attempt to allocate IRQ descriptors dynamically (which works fine) but also to associate the irq_domain_associate_many() on all IRQs, which in turn will call the mapping function which at this point will try to set the type of the IRQ and then tries to acquire a non-initialized spinlock yielding a backtrace like this: CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652 Backtrace: [<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c) r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140 [<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28) [<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80) [<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80) r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000 r4:c782c000 [<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74) r6:c01a1100 r5:800000d3 r4:c798acd0 [<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x) r6:00000000 r5:00000000 r4:c798acd0 [<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104) r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8 [<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60) r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000 [<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54) r6:c79693c0 r5:c798acd0 r4:00000060 [<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190) r5:00000060 r4:c046da1c [<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man) r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000 [<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp) r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008 [<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c) r6:00000060 r5:c0464380 r4:c798acd0 [<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0) r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000 r4:c0464380 This moves the irqdomain initialization to a point where the spinlock and GPIO chip are both fully propulated, so the callbacks can be used without crashes. I had some problem reproducing the crash, as the devm_kzalloc():ed zeroed memory would seemingly mask the spinlock as something OK, but by poisoning the lock like this: u32 *dum; dum = (u32 *) &chip->lock; *dum = 0xaaaaaaaaU; I could reproduce, fix and test the patch. Reported-by: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27HID: uhid: fix leak for 64/32 UHID_CREATEDavid Herrmann
UHID allows short writes so user-space can omit unused fields. We automatically set them to 0 in the kernel. However, the 64/32 bit compat-handler didn't do that in the UHID_CREATE fallback. This will reveal random kernel heap data (of random size, even) to user-space. Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems') Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-27powerpc/windfarm: Fix XServe G5 fan control Makefile issueBenjamin Herrenschmidt
We are missing building windfarm_max6690_sensor.o when building CONFIG_WINDFARM_RM31. Usually all the windfarm drivers are built and thus this isn't a problem but some more "tailored" setups (Gentoo ?) building only that driver are not working because the require sensor module is missing. Reported-by: Stanislav Ponomarev <devhexorg@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-27Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: exynos: Remove unwanted EXPORT_SYMBOL cpufreq: tegra: don't error target() when suspended
2013-11-27Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPI: Clean up incorrect inclusions of ACPICA headers ACPICA: Update version to 20131115. ACPICA: Add support to delete all objects attached to the root namespace node. ACPICA: Delete all attached data objects during namespace node deletion. ACPICA: Resources: Fix loop termination for the get AML length function. ACPICA: Tests: Add CHECKSUM_ABORT protection for test utilities. ACPICA: Debug output: Do not emit function nesting level for kernel build.
2013-11-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Mostly bugfixes and a few small code removals. Worth pointing out is: - A handful of more fixes to get DT enablement working properly on OMAP, finding new breakage of things that don't work quite right yet without the traditional board files. I expect a bit more of this to come in this release as people test on their hardware. - Implementation of power_down_finish() on vexpress, to make kexec work and to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1). - A handful of minor fixes for various platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: bcm2835: add missing #xxx-cells to I2C nodes ARM: dts: Add max77686 RTC interrupt to cros5250-common ARM: vexpress/TC2: Implement MCPM power_down_finish() ARM: tegra: Provide dummy powergate implementation ARM: omap: fix warning with LPAE build ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: imx6qdl: disable spdif "rxtx5" clock option ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-26Merge tag 'ntb-3.13' of git://github.com/jonmason/ntbLinus Torvalds
Pull non-transparent bridge updates from Jon Mason: "NTB driver bug fixes to address a missed call to pci_enable_msix, NTB-RP Link Up issue, Xeon Doorbell errata workaround, ntb_transport link down race, and correct dmaengine_get/put usage. Also, clean-ups to remove duplicate defines and document a hardware errata. Finally, some changes to improve performance" * tag 'ntb-3.13' of git://github.com/jonmason/ntb: NTB: Disable interrupts and poll under high load NTB: Enable Snoop on Primary Side NTB: Document HW errata NTB: remove duplicate defines NTB: correct dmaengine_get/put usage NTB: Fix ntb_transport link down race ntb: Fix missed call to pci_enable_msix() NTB: Fix NTB-RP Link Up NTB: Xeon Doorbell errata workaround
2013-11-26i2c: i2c-bcm-kona: Fix module buildTim Kryger
Correct a typo that prevented the driver from being built as a module. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2CMartin Vogt
The previous diolan adapter uses other out/in endpoints than the current DLN-2-U2C in compatibility mode. They changed from 0x2/0x84 to 0x3/0x83. This patch gets the endpoints from the usb interface, instead of hardcode them in the driver. This was tested on a current DLN-2-U2C board. Signed-off-by: Martin Vogt <mvogt1@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: bcm-kona: remove duplicated includeWei Yongjun
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: davinci: raw read and write endian fixTaras Kondratiuk
I2C IP block expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26sony-laptop: do not scribble keyboard backlight registers on resumeMattia Dongili
Follow-up to commit 294d31e8227c ("sony-laptop: don't change keyboard backlight settings"): avoid messing up the state on resume. Leave it to what was before suspending as it's anyway likely that we still don't know what value we should write to the EC registers. This fix is also required in 3.12 Cc: stable@vger.kernel.org Tested-by: Karol Babioch <karol@babioch.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-25Revert "n_gsm: race between ld close and gsmtty open"Greg Kroah-Hartman
This reverts commit c284ee2cf12b55fa8496b2d098bf0938688f1c1c. Turns out the locking was incorrect. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Chao Bi <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-26ACPI: Clean up incorrect inclusions of ACPICA headersLv Zheng
Header file <acpi/acpi.h> contains environemnt settings and architecture specific implementation that should be included before any other ACPICA headers in order to keep a consistent build environment for ACPICA users. The following internal ACPICA header files should be included from <acpi/acpi.h> and should not be included by other kernel files: <acpi/acpiosxf.h> <acpi/acpixf.h> Clean up incorrect inclusions of these files from non-ACPICA source files. [rjw: Subject and changelog] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-25Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-30 21:02:05 +0000