aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-07-25mtd: nandsim: don't open code a do_div helperHerton Ronaldo Krzesinski
commit 596fd46268634082314b3af1ded4612e1b7f3f03 upstream. We don't need to open code the divide function, just use div_u64 that already exists and do the same job. While this is a straightforward clean up, there is more to that, the real motivation for this. While building on a cross compiling environment in armel, using gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build error: ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined! After investigating with objdump and hand built assembly version generated with the compiler, I narrowed __aeabi_uldivmod as being generated from the divide function. When nandsim.c is built with -fno-inline-functions-called-once, that happens when CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in arch/arm/include/asm/div64.h doesn't work as expected with the open coded divide function: even if the do_div we are using doesn't have a constant divisor, the compiler still includes the else parts of the optimized do_div macro, and translates the divisions there to use __aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and optimizing/removing everything else out. So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel. After this change, the compiler does the intended thing even with -fno-inline-functions-called-once, and optimizes out as expected the constant handling in the optimized do_div on arm. As this also avoids a build issue, I'm marking for Stable, as I think is applicable for this case. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: cdc-wdm: fix lockup on error in wdm_readBjørn Mork
commit b086b6b10d9f182cd8d2f0dcfd7fd11edba93fc9 upstream. Clear the WDM_READ flag on empty reads to avoid running forever in an infinite tight loop, causing lockups: Jul 1 21:58:11 nemi kernel: [ 3658.898647] qmi_wwan 2-1:1.2: Unexpected error -71 Jul 1 21:58:36 nemi kernel: [ 3684.072021] BUG: soft lockup - CPU#0 stuck for 23s! [qmi.pl:12235] Jul 1 21:58:36 nemi kernel: [ 3684.072212] CPU 0 Jul 1 21:58:36 nemi kernel: [ 3684.072355] Jul 1 21:58:36 nemi kernel: [ 3684.072367] Pid: 12235, comm: qmi.pl Tainted: P O 3.5.0-rc2+ #13 LENOVO 2776LEG/2776LEG Jul 1 21:58:36 nemi kernel: [ 3684.072383] RIP: 0010:[<ffffffffa0635008>] [<ffffffffa0635008>] spin_unlock_irq+0x8/0xc [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072388] RSP: 0018:ffff88022dca1e70 EFLAGS: 00000282 Jul 1 21:58:36 nemi kernel: [ 3684.072393] RAX: ffff88022fc3f650 RBX: ffffffff811c56f7 RCX: 00000001000ce8c1 Jul 1 21:58:36 nemi kernel: [ 3684.072398] RDX: 0000000000000010 RSI: 000000000267d810 RDI: ffff88022fc3f650 Jul 1 21:58:36 nemi kernel: [ 3684.072403] RBP: ffff88022dca1eb0 R08: ffffffffa063578e R09: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072407] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002 Jul 1 21:58:36 nemi kernel: [ 3684.072412] R13: 0000000000000246 R14: ffffffff00000002 R15: ffff8802281d8c88 Jul 1 21:58:36 nemi kernel: [ 3684.072418] FS: 00007f666a260700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 1 21:58:36 nemi kernel: [ 3684.072428] CR2: 000000000270d9d8 CR3: 000000022e865000 CR4: 00000000000007f0 Jul 1 21:58:36 nemi kernel: [ 3684.072433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 1 21:58:36 nemi kernel: [ 3684.072444] Process qmi.pl (pid: 12235, threadinfo ffff88022dca0000, task ffff88022ff76380) Jul 1 21:58:36 nemi kernel: [ 3684.072448] Stack: Jul 1 21:58:36 nemi kernel: [ 3684.072458] ffffffffa063592e 0000000100020000 ffff88022fc3f650 ffff88022fc3f6a8 Jul 1 21:58:36 nemi kernel: [ 3684.072466] 0000000000000200 0000000100000000 000000000267d810 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072475] 0000000000000000 ffff880212cfb6d0 0000000000000200 ffff880212cfb6c0 Jul 1 21:58:36 nemi kernel: [ 3684.072479] Call Trace: Jul 1 21:58:36 nemi kernel: [ 3684.072489] [<ffffffffa063592e>] ? wdm_read+0x1a0/0x263 [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072500] [<ffffffff8110adb7>] ? vfs_read+0xa1/0xfb Jul 1 21:58:36 nemi kernel: [ 3684.072509] [<ffffffff81040589>] ? alarm_setitimer+0x35/0x64 Jul 1 21:58:36 nemi kernel: [ 3684.072517] [<ffffffff8110aec7>] ? sys_read+0x45/0x6e Jul 1 21:58:36 nemi kernel: [ 3684.072525] [<ffffffff813725f9>] ? system_call_fastpath+0x16/0x1b Jul 1 21:58:36 nemi kernel: [ 3684.072557] Code: <66> 66 90 c3 83 ff ed 89 f8 74 16 7f 06 83 ff a1 75 0a c3 83 ff f4 The WDM_READ flag is normally cleared by wdm_int_callback before resubmitting the read urb, and set by wdm_in_callback when this urb returns with data or an error. But a crashing device may cause both a read error and cancelling all urbs. Make sure that the flag is cleared by wdm_read if the buffer is empty. We don't clear the flag on errors, as there may be pending data in the buffer which should be processed. The flag will instead be cleared on the next wdm_read call. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: option: Add MEDIATEK product idsGaosen Zhang
commit aacef9c561a693341566a6850c451ce3df68cb9a upstream. Signed-off-by: Gaosen Zhang <gaosen.zhang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25USB: option: add ZTE MF60Bjørn Mork
commit 8e16e33c168a6efd0c9f7fa9dd4c1e1db9a74553 upstream. Switches into a composite device by ejecting the initial driver CD. The four interfaces are: QCDM, AT, QMI/wwan and mass storage. Let this driver manage the two serial interfaces: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 28 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1402 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE WCDMA Technologies MSM S: SerialNumber=xxxxx C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25gpiolib: wm8994: Pay attention to the value set when enabling as outputMark Brown
commit 8cd578b6e28693f357867a77598a88ef3deb6b39 upstream. Not paying attention to the value being set is a bad thing because it means that we'll not set the hardware up to reflect what was requested. Not setting the hardware up to reflect what was requested means that the caller won't get the results they wanted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25usb: Add support for root hub port status CASStanislaw Ledwon
commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 upstream. The host controller port status register supports CAS (Cold Attach Status) bit. This bit could be set when USB3.0 device is connected when system is in Sx state. When the system wakes to S0 this port status with CAS bit is reported and this port can't be used by any device. When CAS bit is set the port should be reset by warm reset. This was not supported by xhci driver. The issue was found when pendrive was connected to suspended platform. The link state of "Compliance Mode" was reported together with CAS bit. This link state was also not supported by xhci and core/hub.c. The CAS bit is defined only for xhci root hub port and it is not supported on regular hubs. The link status is used to force warm reset on port. Make the USB core issue a warm reset when port is in ether the 'inactive' or 'compliance mode'. Change the xHCI driver to report 'compliance mode' when the CAS is set. This force warm reset on the root hub port. This patch should be backported to stable kernels as old as 3.2, that contain the commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When hot reset for USB3 fails, try warm reset." Signed-off-by: Stanislaw Ledwon <staszek.ledwon@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25iommu/amd: Initialize dma_ops for hotplug and sriov devicesJoerg Roedel
commit ac1534a55d1e87d59a21c09c570605933b551480 upstream. When a device is added to the system at runtime the AMD IOMMU driver initializes the necessary data structures to handle translation for it. But it forgets to change the per-device dma_ops to point to the AMD IOMMU driver. So mapping actually never happens and all DMA accesses end in an IO_PAGE_FAULT. Fix this. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> [bwh: Backported to 3.2: - Adjust context - Use global iommu_pass_through; there is no per-device pass_through] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25iommu/amd: Fix missing iommu_shutdown initialization in passthrough modeShuah Khan
commit f2f12b6fc032c7b1419fd6db84e2868b5f05a878 upstream. The iommu_shutdown callback is not initialized when the AMD IOMMU driver runs in passthrough mode. Fix that by moving the callback initialization before the check for passthrough mode. Signed-off-by: Shuah Khan <shuah.khan@hp.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25macvtap: zerocopy: validate vectors before building skbJason Wang
commit b92946e2919134ebe2a4083e4302236295ea2a73 upstream. There're several reasons that the vectors need to be validated: - Return error when caller provides vectors whose num is greater than UIO_MAXIOV. - Linearize part of skb when userspace provides vectors grater than MAX_SKB_FRAGS. - Return error when userspace provides vectors whose total length may exceed - MAX_SKB_FRAGS * PAGE_SIZE. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25macvtap: zerocopy: set SKBTX_DEV_ZEROCOPY only when skb is built successfullyJason Wang
commit 01d6657b388438def19c8baaea28e742b6ed32ec upstream. Current the SKBTX_DEV_ZEROCOPY is set unconditionally after zerocopy_sg_from_iovec(), this would lead NULL pointer when macvtap fails to build zerocopy skb because destructor_arg was not initialized. Solve this by set this flag after the skb were built successfully. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25macvtap: zerocopy: put page when fail to get all requested user pagesJason Wang
commit 02ce04bb3d28c3333231f43bca677228dbc686fe upstream. When get_user_pages_fast() fails to get all requested pages, we could not use kfree_skb() to free it as it has not been put in the skb fragments. So we need to call put_page() instead. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25macvtap: zerocopy: fix truesize underestimationJason Wang
commit 4ef67ebedffa44ed9939b34708ac2fee06d2f65f upstream. As the skb fragment were pinned/built from user pages, we should account the page instead of length for truesize. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25macvtap: zerocopy: fix offset calculation when building skbJason Wang
commit 3afc9621f15701c557e60f61eba9242bac2771dd upstream. This patch fixes the offset calculation when building skb: - offset1 were used as skb data offset not vector offset - reset offset to zero only when we advance to next vector Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25brcmsmac: "INTERMEDIATE but not AMPDU" only when tracingEldad Zack
commit 6ead629b27269c553c9092c47cd8f5ab0309ee3b upstream. I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Acked-by: Franky Lin<frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25drm/i915: fix operator precedence when enabling RC6pEugeni Dodonov
commit c0e2ee1bc0cf82eec89e26b7afe7e4db0561b7d9 upstream. As noticed by Torsten Kaiser, the operator precedence can play tricks with us here. CC: Dave Airlie <airlied@redhat.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25drm/i915: do not enable RC6p on Sandy BridgeEugeni Dodonov
commit 1c8ecf80fdee4e7b23a9e7da7ff9bd59ba2dcf96 upstream. With base on latest findings, RC6p seems to be respondible for RC6-related issues on Sandy Bridge platform. To work-around those issues, the previous solution was to completely disable RC6 on Sandy Bridge for the past few releases, even if plain RC6 was not giving any issues. What this patch does is preventing RC6p from being enabled on Sandy Bridge even if users enable RC6 via a kernel parameter. So it won't change the defaults in any way, but will ensure that if users do enable RC6 manually it won't break their machines by enabling this extra state. Proper fix for this (enabling specific RC6 states according to the GPU generation) were proposed for the -next kernel, but we are too late in the release process now to pick such changes. Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25net/wireless: ipw2x00: add supported cipher suites to wiphy initializationStanislav Yakovlev
commit a141e6a0097118bb35024485f1faffc0d9042f5c upstream. Driver doesn't report its supported cipher suites through cfg80211 interface. It still uses wext interface and probably will not work through nl80211, but will at least correctly advertise supported features. Bug was reported by Omar Siam. https://bugzilla.kernel.org/show_bug.cgi?id=43049 Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25rtl8187: ->brightness_set can not sleepStanislaw Gruszka
commit 0fde0a8cfd0ede7f310d6a681c8e5a7cb3e32406 upstream. Fix: BUG: sleeping function called from invalid context at kernel/workqueue.c:2547 in_atomic(): 1, irqs_disabled(): 0, pid: 629, name: wpa_supplicant 2 locks held by wpa_supplicant/629: #0: (rtnl_mutex){+.+.+.}, at: [<c08b2b84>] rtnl_lock+0x14/0x20 #1: (&trigger->leddev_list_lock){.+.?..}, at: [<c0867f41>] led_trigger_event+0x21/0x80 Pid: 629, comm: wpa_supplicant Not tainted 3.3.0-0.rc3.git5.1.fc17.i686 Call Trace: [<c046a9f6>] __might_sleep+0x126/0x1d0 [<c0457d6c>] wait_on_work+0x2c/0x1d0 [<c045a09a>] __cancel_work_timer+0x6a/0x120 [<c045a160>] cancel_delayed_work_sync+0x10/0x20 [<f7dd3c22>] rtl8187_led_brightness_set+0x82/0xf0 [rtl8187] [<c0867f7c>] led_trigger_event+0x5c/0x80 [<f7ff5e6d>] ieee80211_led_radio+0x1d/0x40 [mac80211] [<f7ff3583>] ieee80211_stop_device+0x13/0x230 [mac80211] Removing _sync is ok, because if led_on work is currently running it will be finished before led_off work start to perform, since they are always queued on the same mac80211 local->workqueue. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=795176 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25tg3: Apply short DMA frag workaround to 5906Matt Carlson
commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream. 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25raid5: delayed stripe fixShaohua Li
commit fab363b5ff502d1b39ddcfec04271f5858d9f26e upstream. There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but the two bits have relationship. A delayed stripe can be moved to hold list only when preread active stripe count is below IO_THRESHOLD. If a stripe has both the bits set, such stripe will be in delayed list and preread count not 0, which will make such stripe never leave delayed list. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25samsung-laptop: make the dmi check less strictCorentin Chary
commit 3be324a94df0c3f032178d04549dbfbf6cccb09a upstream. This enable the driver for everything that look like a laptop and is from vendor "SAMSUNG ELECTRONICS CO., LTD.". Note that laptop supported by samsung-q10 seem to have a different vendor strict. Also remove every log output until we know that we have a SABI interface (except if the driver is forced to load, or debug is enabled). Keeping a whitelist of laptop with a model granularity is something that can't work without close vendor cooperation (and we don't have that). Signed-off-by: Corentin Chary <corentincj@iksaif.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Matthew Garrett <mjg@redhat.com> [bwh: Backported to 3.2: - Adjust context - Drop changes relating to ACPI video] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12tcm_fc: Resolve suspicious RCU usage warningsMark Rustad
commit 863555be0c81558b1af277addcf68acb8f778860 upstream. Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12mtd: cafe_nand: fix an & vs | mistakeDan Carpenter
commit 48f8b641297df49021093763a3271119a84990a2 upstream. The intent here was clearly to set result to true if the 0x40000000 flag was set. But instead there was a | vs & typo and we always set result to true. Artem: check the spec at wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf and this fix looks correct. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12bonding: Fix corrupted queue_mappingEric Dumazet
[ Upstream commit 5ee31c6898ea5537fcea160999d60dc63bc0c305 ] In the transmit path of the bonding driver, skb->cb is used to stash the skb->queue_mapping so that the bonding device can set its own queue mapping. This value becomes corrupted since the skb->cb is also used in __dev_xmit_skb. When transmitting through bonding driver, bond_select_queue is called from dev_queue_xmit. In bond_select_queue the original skb->queue_mapping is copied into skb->cb (via bond_queue_mapping) and skb->queue_mapping is overwritten with the bond driver queue. Subsequently in dev_queue_xmit, __dev_xmit_skb is called which writes the packet length into skb->cb, thereby overwriting the stashed queue mappping. In bond_dev_queue_xmit (called from hard_start_xmit), the queue mapping for the skb is set to the stashed value which is now the skb length and hence is an invalid queue for the slave device. If we want to save skb->queue_mapping into skb->cb[], best place is to add a field in struct qdisc_skb_cb, to make sure it wont conflict with other layers (eg : Qdiscc, Infiniband...) This patchs also makes sure (struct qdisc_skb_cb)->data is aligned on 8 bytes : netem qdisc for example assumes it can store an u64 in it, without misalignment penalty. Note : we only have 20 bytes left in (struct qdisc_skb_cb)->data[]. The largest user is CHOKe and it fills it. Based on a previous patch from Tom Herbert. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Tom Herbert <therbert@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Roland Dreier <roland@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12dummy: fix rcu_sched self-detected stallsEric Dumazet
[ Upstream commit 16b0dc29c1af9df341428f4c49ada4f626258082 ] Trying to "modprobe dummy numdummies=30000" triggers : INFO: rcu_sched self-detected stall on CPU { 8} (t=60000 jiffies) After this splat, RTNL is locked and reboot is needed. We must call cond_resched() to avoid this, even holding RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12be2net: fix a race in be_xmit()Eric Dumazet
[ Upstream commit cd8f76c0a0c6fce0b2cf23c9bd0123f91453f46d ] As soon as hardware is notified of a transmit, we no longer can assume skb can be dereferenced, as TX completion might have freed the packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12sky2: fix checksum bit management on some chipsstephen hemminger
[ Upstream commit 5ff0feac88ced864f44adb145142269196fa79d9 ] The newer flavors of Yukon II use a different method for receive checksum offload. This is indicated in the driver by the SKY2_HW_NEW_LE flag. On these newer chips, the BMU_ENA_RX_CHKSUM should not be set. The driver would get incorrectly toggle the bit, enabling the old checksum logic on these chips and cause a BUG_ON() assertion. If receive checksum was toggled via ethtool. Reported-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12mwifiex: fix wrong return values in add_virtual_intf() error casesBing Zhao
commit 858faa57dd9e2b91f3f870fbb1185982e42f5a2b upstream backported for linux-3.2.y, linux-3.3.y, linux-3.4.y add_virtual_intf() needs to return an ERR_PTR(), instead of NULL, on errors, otherwise cfg80211 will crash. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12dm persistent data: fix allocation failure in space map checker initMike Snitzer
commit b0239faaf87c38bb419c9264bf20817438ddc3a9 upstream. If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and memory is fragmented and a sufficiently-large metadata device is used in a thin pool then the space map checker will fail to allocate the memory it requires. Switch from kmalloc to vmalloc to allow larger virtually contiguous allocations for the space map checker's internal count arrays. Reported-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12dm persistent data: handle space map checker creation failureMike Snitzer
commit 62662303e7f590fdfbb0070ab820a0ad4267c119 upstream. If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and dm_sm_checker_create() fails, dm_tm_create_internal() would still return success even though it cleaned up all resources it was supposed to have created. This will lead to a kernel crash: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC ... RIP: 0010:[<ffffffff81593659>] [<ffffffff81593659>] dm_bufio_get_block_size+0x9/0x20 Call Trace: [<ffffffff81599bae>] dm_bm_block_size+0xe/0x10 [<ffffffff8159b8b8>] sm_ll_init+0x78/0xd0 [<ffffffff8159c1a6>] sm_ll_new_disk+0x16/0xa0 [<ffffffff8159c98e>] dm_sm_disk_create+0xfe/0x160 [<ffffffff815abf6e>] dm_pool_metadata_open+0x16e/0x6a0 [<ffffffff815aa010>] pool_ctr+0x3f0/0x900 [<ffffffff8158d565>] dm_table_add_target+0x195/0x450 [<ffffffff815904c4>] table_load+0xe4/0x330 [<ffffffff815917ea>] ctl_ioctl+0x15a/0x2c0 [<ffffffff81591963>] dm_ctl_ioctl+0x13/0x20 [<ffffffff8116a4f8>] do_vfs_ioctl+0x98/0x560 [<ffffffff8116aa51>] sys_ioctl+0x91/0xa0 [<ffffffff81869f52>] system_call_fastpath+0x16/0x1b Fix the space map checker code to return an appropriate ERR_PTR and have dm_sm_disk_create() and dm_tm_create_internal() check for it with IS_ERR. Reported-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12dm persistent data: fix shadow_info_leak on dm_tm_destroyMike Snitzer
commit 25d7cd6faa7ae6ed2565617c3ee2500ccb8a9f7f upstream. Cleanup the shadow table before destroying the transaction manager. Reference: leak was identified with kmemleak when running test_discard_random_sectors in the thinp-test-suite. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12drm/i915: kick any firmware framebuffers before claiming the gttDaniel Vetter
commit 9f846a16d213523fbe6daea17e20df6b8ac5a1e5 upstream. Especially vesafb likes to map everything as uc- (yikes), and if that mapping hangs around still while we try to map the gtt as wc the kernel will downgrade our request to uc-, resulting in abyssal performance. Unfortunately we can't do this as early as readon does (i.e. as the first thing we do when initializing the hw) because our fb/mmio space region moves around on a per-gen basis. So I've had to move it below the gtt initialization, but that seems to work, too. The important thing is that we do this before we set up the gtt wc mapping. Now an altogether different question is why people compile their kernels with vesafb enabled, but I guess making things just work isn't bad per se ... v2: - s/radeondrmfb/inteldrmfb/ - fix up error handling v3: Kill #ifdef X86, this is Intel after all. Noticed by Ben Widawsky. v4: Jani Nikula complained about the pointless bool primary initialization. v5: Don't oops if we can't allocate, noticed by Chris Wilson. v6: Resolve conflicts with agp rework and fixup whitespace. This is commit e188719a2891f01b3100d in drm-next. Backport to 3.5 -fixes queue requested by Dave Airlie - due to grub using vesa on fedora their initrd seems to load vesafb before loading the real kms driver. So tons more people actually experience a dead-slow gpu. Hence also the Cc: stable. Reported-and-tested-by: "Kilarski, Bernard R" <bernard.r.kilarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12md/raid10: fix failure when trying to repair a read error.NeilBrown
commit 055d3747dbf00ce85c6872ecca4d466638e80c22 upstream. commit 58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf md/raid10: handle further errors during fix_read_error better. in 3.1 added "r10_sync_page_io" which takes an IO size in sectors. But we were passing the IO size in bytes!!! This resulting in bio_add_page failing, and empty request being sent down, and a consequent BUG_ON in scsi_lib. [fix missing space in error message at same time] This fix is suitable for 3.1.y and later. Reported-by: Christian Balzer <chibi@gol.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdevmajianpeng
commit 1850753d2e6d9ca7856581ca5d3cf09521e6a5d7 upstream. In ops_run_io(), the call to md_wait_for_blocked_rdev will decrement nr_pending so we lose the reference we hold on the rdev. So atomic_inc it first to maintain the reference. This bug was introduced by commit 73e92e51b7969ef5477d md/raid5. Don't write to known bad block on doubtful devices. which appeared in 3.0, so patch is suitable for stable kernels since then. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12md/raid5: Do not add data_offset before call to is_badblockmajianpeng
commit 6c0544e255dd6582a9899572e120fb55d9f672a4 upstream. In chunk_aligned_read() we are adding data_offset before calling is_badblock. But is_badblock also adds data_offset, so that is bad. So move the addition of data_offset to after the call to is_badblock. This bug was introduced by commit 31c176ecdf3563140e639 md/raid5: avoid reading from known bad blocks. which first appeared in 3.0. So that patch is suitable for any -stable kernel from 3.0.y onwards. However it will need minor revision for most of those (as the comment didn't appear until recently). Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: ignored missing comment] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12md/raid10: Don't try to recovery unmatched (and unused) chunks.NeilBrown
commit fc448a18ae6219af9a73257b1fbcd009efab4a81 upstream. If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Reported-by: Christian Balzer <chibi@gol.com> Tested-by: Christian Balzer <chibi@gol.com> Signed-off-by: NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12ath9k: enable serialize_regmode for non-PCIE AR9287Panayiotis Karabassis
commit 7508b657967cf664b5aa0f6367d05016e7e3bc2a upstream. https://bugzilla.kernel.org/show_bug.cgi?id=42903 Based on the work of <fynivx@gmail.com> Signed-off-by: Panayiotis Karabassis <panayk@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12rtlwifi: rtl8192cu: New USB IDsLarry Finger
commit f63d7dabd5da9ef41f28f6d69b29bc084db0ca5a upstream. The latest Realtek driver for the RTL8188CU and RTL8192CU chips adds three new USB IDs. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12ath9k: fix dynamic WEP related regressionFelix Fietkau
commit bed3d9c0b71f9afbfec905cb6db3b9f16be29d4d upstream. commit 7a532fe7131216a02c81a6c1b1f8632da1195a58 ath9k_hw: fix interpretation of the rx KeyMiss flag This commit used the rx key miss indication to detect packets that were passed from the hardware without being decrypted, however it seems that this bit is not only undefined in the static WEP case, but also for dynamically allocated WEP keys. This caused a regression when using WEP-LEAP. This patch fixes the regression by keeping track of which key indexes refer to CCMP keys and only using the key miss indication for those. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12mwifiex: fix WPS eapol handshake failureStone Piao
commit f03ba7e9a24e5e9efaad56bd1713b994ea556b16 upstream. After association, STA will go through eapol handshake with WPS enabled AP. It's observed that WPS handshake fails with some 11n AP. The reason for the failure is that the eapol packet is sent via 11n frame aggregation. The eapol packet should be sent directly without 11n aggregation. This patch fixes the problem by adding WPS session control while dequeuing Tx packets for transmission. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: reformat the if-statement per earlier upstream commit c65a30f35f938b421ac67c34a9e70b0e49e6019a] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12mwifiex: fix 11n rx packet drop issueStone Piao
commit 925839243dc9aa4ef25305f5afd10ed18258a4ac upstream. Currently we check the sequence number of last packet received against start_win. If a sequence hole is detected, start_win is updated to next sequence number. Since the rx sequence number is initialized to 0, a corner case exists when BA setup happens immediately after association. As 0 is a valid sequence number, start_win gets increased to 1 incorrectly. This causes the first packet with sequence number 0 being dropped. Initialize rx sequence number as 0xffff and skip adjusting start_win if the sequence number remains 0xffff. The sequence number will be updated once the first packet is received. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12umem: fix up unpluggingTao Guo
commit 32587371ad3db2f9d335de10dbd8cffd4fff5669 upstream. Fix a regression introduced by 7eaceaccab5f40 ("block: remove per-queue plugging"). In that patch, Jens removed the whole mm_unplug_device() function, which used to be the trigger to make umem start to work. We need to implement unplugging to make umem start to work, or I/O will never be triggered. Signed-off-by: Tao Guo <Tao.Guo@emc.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Shaohua Li <shli@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04acpi_pad: fix power_saving thread deadlockStuart Hayes
commit 5f1601261050251a5ca293378b492a69d590dacb upstream. The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang
commit 85f2f834e85517307f13e30e630a5fc86f757cb5 upstream. The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04xen/netfront: teardown the device before unregistering it.Ian Campbell
commit 6bc96d047fe32d76ef79f3195c52a542edf7c705 upstream. Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: William Dauchy <wdauchy@gmail.com> Cc: 675190@bugs.debian.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: CP210x Add 10 Device IDsCraig Shelley
commit 3fcc8f96829776cf181918461923d1e3bbb831a2 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
commit 065b07e7a14676f4138ce4619d229c0be5a74230 upstream. This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERMH. Peter Anvin
commit 4ad33411308596f2f918603509729922a1ec4411 upstream. It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> [bwh: Backported to 3.2: drop the coretemp device table change] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04PM / Sleep: Prevent waiting forever on asynchronous suspend after abortMandeep Singh Baines
commit 1f758b23177d588a71b96ad02990e715949bb82f upstream. __device_suspend() must always send a completion. Otherwise, parent devices will wait forever. Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and system sleep (v2)", introduced a regression by short-circuiting the complete_all() for certain error cases. This patch fixes the bug by always signalling a completion. Addresses http://crosbug.com/31972 Tested by injecting an abort. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-04drm/i915: Fix eDP blank screen after S3 resume on HP desktopsTakashi Iwai
commit 6db65cbb941f9d433659bdad02b307f6d94465df upstream. This patch fixes the problem on some HP desktop machines with eDP which give blank screens after S3 resume. It turned out that BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2. Otherwise it doesn't take effect on these SNB machines. Tested with 3.5-rc3 kernel. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49233 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-23 20:35:43 +0000