aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-18V4L/DVB (7183): radio-si470x: fix build warningMichael Krufky
fix the following build warning: radio-si470x.c: In function 'si470x_get_rds_registers': radio-si470x.c:562: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma ↵Mauro Carvalho Chehab
is set Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7179): Allow more than one em28xx boardMauro Carvalho Chehab
em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7164): em28xx-alsa: Add a missing mutexMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7163): em28xx: makes audio settings more stableMauro Carvalho Chehab
Improves audio configurations on em28xx: - mutes audio before changing amux; - adds a delay after setting audio src; - waits up to 50ms for ac97 busy. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7162): em28xx: Fix endian and returns the correct valuesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7161): em28xx: Fix printing debug values higher than 127Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7160): em28xx: Allow register dump/setting for debugMauro Carvalho Chehab
Adds vidioc_[g|s]_register handlers. This allows getting/setting register from em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7158): Fix em28xx audio initializationMauro Carvalho Chehab
AC97 register initialization seem to always be needed. This patch fixes audio for Prolink/Pixelview USB2 board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7156): em28xx/em28xx-core.c: fix use of potentially uninitialized ↵Andrew Morton
variable drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source': drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function This looks like a genuine bug to me. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7150): [v4l] convert videbuf_vmalloc_memory to videobuf_vmalloc_memoryBrandon Philips
Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7139): add parenthesesRoel Kluin
'!' has a higher priority than '&': bitanding has no effect. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7132): Add USB ID for a newer variant of Hauppauge WinTV-HVR 900Luc Saillard
Device description: WinTV-HVR-900 M/R: 65018/B3C0 ##4207 Signed-off-by: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7122): saa7134-empress: Remove back lockMauro Carvalho Chehab
videobuf functions at close() method already locks videobuf. It makes no sense to keep the locking at empress close() method. There is also a lock at open() method. I'm not sure if it is safe to remove the locking there. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7121): Renames videobuf lock to vb_lockMauro Carvalho Chehab
This helps to identify where vb_lock is being used, and find missusages of the locks. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7120): videobuf lock is already initialized at videobuf-core.cMauro Carvalho Chehab
Removes the duplicated mutex_init code. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7118): dvb-ttpci: Improved display of still picturesOliver Endriss
Improved display of still pictures (VIDEO_STILLPICTURE ioctl). Ensure that both fields are displayed for progressive frames. Thanks to Reinhard Nissl and Klaus Schmidinger for finding out that the FREEZE command does this. Thanks-to: Reinhard Nissl <rnissl@gmx.de> Thanks-to: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7117): budget-av: Add support for Satelco EasyWatch PCI DVB-TKim Sandberg
Add support for Satelco EasyWatch PCI DVB-T, sub-id 0x1894:0x003a. Signed-off-by: Kim Sandberg <ksan@saunalahti.fi> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7116): budget-av: Add support for KNC TV Station Plus X4Oliver Endriss
Add support for KNC TV Station Plus X4, sub-system id 0x1894:0x0015. Based on a patch submitted by Johannes Deisenhofer. Thanks-to: Johannes Deisenhofer <jo.deisenhofer@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7110): Trivial printf warning fix (radio-si470)Tobias Lorenz
Thanks to Darren Salt <linux@youmustbejoking.demon.co.uk> for pointing this issue. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7108): radio-si470x.c: check-after-useTobias Lorenz
Adrian used the coverity checker against radio-si470x and found this: > The Coverity checker spotted the following check-after-use in > drivers/media/radio/radio-si470x.c: > > <-- snip --> > static void si470x_usb_driver_disconnect(struct usb_interface *intf) > { > struct si470x_device *radio = usb_get_intfdata(intf); > > del_timer_sync(&radio->timer); <------------------ > flush_scheduled_work(); > > usb_set_intfdata(intf, NULL); > if (radio) { <------------------ > video_unregister_device(radio->videodev); > kfree(radio->buffer); > kfree(radio); > } > } > <-- snip --> > > Either "radio" can be NULL and this case has to be properly handled or > the NULL check is not required. These two lines should indeed better be inside the if statement. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7106): em28xx/: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - em28xx-core.c:em28xx_write_reg_bits() - em28xx-video.c:em28xx_vdev_init() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7104): stk-sensor.c: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - stk_sensor_outb() - stk_sensor_inb() Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7103): make stk_camera_cleanup() staticAdrian Bunk
stk_camera_cleanup() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7102): make tuner-core.c:tuner_list staticAdrian Bunk
tuner_list can become static - and it's anyway a way too generic name for a global variable - see commit b00ef4b8d8c29bfb5f6f92ee60bc04b604f36ef2 for a completely different global variable of the same name I just made static... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7100): frontends/tda18271-common.c: fix off-by-oneAdrian Bunk
This patch fixes an off-by-one error spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7097): saa7134-dvb: add missing dvb_attach call (for tda10046_attach)Matthias Schwarzott
saa7134-dvb: add missing dvb_attach around tda10046_attach This patch adds a possibly missing dvb_attach for tda10046_attach. This removes the hard dependency of saa7134-dvb on tda1004x module. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7093): radio-sf16fmi: fix request_region()Mauro Carvalho Chehab
isapnp_fmi_probe attaches device. However, if request_region() fails, the device isn't disattached. Reviewed-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7092): radio-sf16fmr2: fix request_region() validation [bugzilla 9699]Douglas Schilling Landgraf
This patch changed the request_region() validation to avoid invalid return. Thanks to Roland Kletzing <devzero@web.de> for bug report and data collection. Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7091): radio-si470x improvements and seldom problem fixed in tuning ↵Tobias Lorenz
functions I updated the radio-si470x driver another time. Here are the commented history entries: - number of seek_retries changed to tune_timeout The last versions checked for the end of frequency tuning by polling a si470x register. Therefore polling depended on the usb utilization. This was changed to have a constant timeout now. - fixed problem with incomplete tune operations by own buffers The last version used a shared buffer to assembly the USB HID reports. It sometimes happened, that multiple functions were modifing this buffer simultanuously. When sending such reports, the hardware returned USB stalls (-EPIPE). Now buffers of the correct size (smaller than before) are allocated as local variables. - optimization of variables The size of some variables has been reduced to allow the compiler to generate more optimized code. - improved error logging At some important location, error checking was improved. Especially the usb transfers to access si470x registers and the tuning functions were modified. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7090): V4L: stkwebcam: use v4l_compat_ioctl32Jaime Velasco Juan
Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7089): V4L: stkwebcam: Power management supportJaime Velasco Juan
Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7088): V4L: stkwebcam: Add support for YUYV formatJaime Velasco Juan
Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7086): driver: tcm825x - fix logical typo errorCyrill Gorcunov
This patch does fix potential NULL pointer dereference due to logical typo error. The issue is pointed out by Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> CC: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7085): saa7134: detect the LifeView FlyDVB-T Hybrid Mini PCIHermann Pitton
Thanks to Angelo Lisco for his initial patch we missed and to Ahmet Dogan Ugurel confirming such a device functional. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7084): saa7134: add support for the Medion / Creatix CTX948 cardHermann Pitton
This adds support for analog inputs and DVB-T. Good sensitivity for DVB-T currently needs to use analog TV first. DVB-S support is not yet completed, but is on the way. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7083): saa7134: enable radio and external analog audio-in on the md2819Hermann Pitton
It also enumerates now the separate composite input at first and adds mute ability to radio and external audio-in. Many thanks to Daftcho Tabakov for reporting the flaws and testing. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7082): support for Twinhan Hybrid DTV-DVB 3056 PCIHermann Pitton
S-Video is unconfirmed, but likely correct. The remote is not yet investigated. Thanks go to Sioux for providing code and asking to fix the auto detection. Signed-off-by: sioux <sioux_it@libero.it> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7081): zr364xx: add support for Creative DiVi CAM 516Antoine Jacquet
Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7080): zr364xx: add support for Pentax Optio 50Antoine Jacquet
Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7076): bt878: include KERN_ facility levelAkinobu Mita
printk should use KERN_* levels. CC: Manu Abraham <manu@linuxtv.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7049): Remove sound/driver.hMauro Carvalho Chehab
sound/driver.h is already included by sound/core. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7133): Fix Kconfig dependenciesMauro Carvalho Chehab
As pointed by Adrian Bunk, with I2C=m and VIDEO_DEV=y, videodev brokes. This patch moves the functions that videodev needs from v4l2-common. It also fixes some Kconfig changes. After this patch, I2C=m / VIDEO_DEV=y will make v4l2 core statically linked into kernel. v4l2-common will be m, and all V4L drivers will also be m. This approach is very conservative, since it is possible to have V4L drivers that don't need I2C or v4l2-common. The better is to map what drivers really need v4l2-common, making them to select v4l2-common, and allowing the others to be 'y', 'm' and 'n'. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7119): Remove obsolete code from v4l2-commonMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7115): Fix bug #9833: regression when compiling V4L without I2CMauro Carvalho Chehab
Adrian Bunk reported: > > Commit 8ffbc6559493c64d6194c92d856196fdaeb8a5fb causes the following > > compile error with CONFIG_VIDEO_DEV=y/m, CONFIG_I2C=n: > > > > <-- snip --> > > > > ... > > MODPOST 26 modules > > ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined! > > make[2]: *** [__modpost] Error 1 > > > > <-- snip --> ... And what should happen if CONFIG_VIDEO_DEV=y, CONFIG_I2C=m? CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-15Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: fix sparse warning in pata_acpi.c ata: fix sparse warning in pata_marvell.c ata: fix sparse warning in pata_jmicron.c ata: fix sparse warning in pata_cs5536.c ata: sparse fixes for pata_amd.c pata_scc.c: add thaw ops pata_cs5536.c bugfix pata_legacy: don't call ata_host_detach() after initialization failure ata: fix sparse warnings in sata_mv.c ata: fix sparse warning in sata_via.c ata: fix sparse warning in sata_promise.c ata: fix sparse warning in ata_piix.c ata: fix sparse warning in libata-core.c ata: make ata_scsiop_inq_89 static in libata-scsi.c
2008-02-15ata: fix sparse warning in pata_acpi.cHarvey Harrison
drivers/ata/pata_acpi.c:80:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-15ata: fix sparse warning in pata_marvell.cHarvey Harrison
drivers/ata/pata_marvell.c:88:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-15ata: fix sparse warning in pata_jmicron.cHarvey Harrison
drivers/ata/pata_jmicron.c:118:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-15ata: fix sparse warning in pata_cs5536.cHarvey Harrison
Everybody passes in a u32...why fight it. drivers/ata/pata_cs5536.c:124:26: warning: incorrect type in argument 3 (different signedness) drivers/ata/pata_cs5536.c:124:26: expected int *val drivers/ata/pata_cs5536.c:124:26: got unsigned int *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>