aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/
2009-03-18Staging: benet: remove driver now that it is merged in drivers/net/Greg Kroah-Hartman
The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: Sathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-18Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram
2009-03-18Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-03-17USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik
The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add device id for Option GTM380 to option driverAchilleas Kotsis
Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel
* newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff
Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2009-03-17USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams
The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern
This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: EHCI: Fix isochronous URB leakKarsten Wiese
ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: option.c: add ZTE 622 modem deviceAlbert Pauw
Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: wusbcore/wa-xfer, fix lock imbalanceJiri Slaby
Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/vstusb, fix lock imbalanceJiri Slaby
Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: misc/adutux, fix lock imbalanceJiri Slaby
Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: image/mdc800, fix lock imbalanceJiri Slaby
There is an omitted unlock in mdc800_usb_probe's fail path. Add it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Henning Zabel <henning@uni-paderborn.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: atm/cxacru, fix lock imbalanceJiri Slaby
We do not hold mutex in one place in cxacru_cm, but unlock it on fail path. Fix this. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Simon Arlott <cxacru@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: unusual_devs: Add support for GI 0431 SD-Card interfaceJan Dumon
Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: new cp2101 device idRobert M. Kenney
From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist ↵Michael Hennerich
interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: serial: add FTDI USB/Serial converter devicesAxel Wachtler
Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: usbfs: keep async URBs until the device file is closedAlan Stern
The usbfs driver manages a list of completed asynchronous URBs. But it is too eager to free the entries on this list: destroy_async() gets called whenever an interface is unbound or a device is removed, and it deallocates the outstanding struct async entries for all URBs on that interface or device. This is wrong; the user program should be able to reap an URB any time after it has completed, regardless of whether or not the interface is still bound or the device is still present. This patch (as1222) moves the code for deallocating the completed list entries from destroy_async() to usbdev_release(). The outstanding entries won't be freed until the user program has closed the device file, thereby eliminating any possibility that the remaining URBs might still be reaped. This fixes a bug in which a program can hang in the USBDEVFS_REAPURB ioctl when the device is unplugged. Reported-and-tested-by: Martin Poupe <martin.poupe@upek.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: usbtmc: add protocol 1 supportGreg Kroah-Hartman
The driver already supports the 1 protocol support, so just add it to the MODULE_DEVICE_TABLE entry so it properly picks up these devices. Thanks to Jouni Rynö for pointing this out. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17USB: usbtmc: fix stupid bug in open()Greg Kroah-Hartman
open() will never succeed, as we always return -ENODEV. Fix this obvious bug. Thanks to Jouni Ryno for reporting it. Reported-by: Jouni Ryno <Jouni.Ryno@fmi.fi> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm crypt: wait for endio to complete before destruction dm crypt: fix kcryptd_async_done parameter dm io: respect BIO_MAX_PAGES limit dm table: rework reference counting fix dm ioctl: validate name length when renaming
2009-03-16Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acpi-wmi: unsigned cannot be less than 0 thinkpad-acpi: fix module autoloading for older models acer-wmi: Unmark as 'experimental' acpi-wmi: Unmark as 'experimental' acer-wmi: double free in acer_rfkill_exit() platform/x86: depends instead of select for laptop platform drivers asus-laptop: use select instead of depends on eeepc-laptop: restore acpi_generate_proc_event() asus-laptop: restore acpi_generate_proc_event() acpi: check for pxm_to_node_map overflow ACPI: remove doubled status checking ACPI suspend: Blacklist Toshiba Satellite L300 that requires to set SCI_EN directly on resume Revert "ACPI: make some IO ports off-limits to AML" suspend: switch the Asus Pundit P1-AH2 to old ACPI sleep ordering
2009-03-16dm crypt: wait for endio to complete before destructionMilan Broz
The following oops has been reported when dm-crypt runs over a loop device. ... [ 70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000) ... [ 70.381058] Call Trace: [ 70.381058] [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt] [ 70.381058] [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt] [ 70.381058] [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod] [ 70.381058] [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod] [ 70.381058] [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod] [ 70.381058] [<c01a2f24>] ? bio_endio+0x2b/0x2e [ 70.381058] [<c02bad86>] ? loop_thread+0x380/0x3b7 [ 70.381058] [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165 [ 70.381058] [<c013754f>] ? autoremove_wake_function+0x0/0x33 [ 70.381058] [<c02baa06>] ? loop_thread+0x0/0x3b7 When a table is being replaced, it waits for I/O to complete before destroying the mempool, but the endio function doesn't call mempool_free() until after completing the bio. Fix it by swapping the order of those two operations. The same problem occurs in dm.c with md referenced after dec_pending. Again, we swap the order. Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm crypt: fix kcryptd_async_done parameterHuang Ying
In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Cc: stable@kernel.org Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm io: respect BIO_MAX_PAGES limitMikulas Patocka
dm-io calls bio_get_nr_vecs to get the maximum number of pages to use for a given device. It allocates one additional bio_vec to use internally but failed to respect BIO_MAX_PAGES, so fix this. This was the likely cause of: https://bugzilla.redhat.com/show_bug.cgi?id=173153 Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm table: rework reference counting fixMikulas Patocka
Fix an error introduced in dm-table-rework-reference-counting.patch. When there is failure after table initialization, we need to use dm_table_destroy, not dm_table_put, to free the table. dm_table_put may be used only after dm_table_get. Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16dm ioctl: validate name length when renamingMilan Broz
When renaming a mapped device validate the length of the new name. The rename ioctl accepted any correctly-terminated string enclosed within the data passed from userspace. The other ioctls enforce a size limit of DM_NAME_LEN. If the name is changed and becomes longer than that, the device can no longer be addressed by name. Fix it by properly checking for device name length (including terminating zero). Cc: stable@kernel.org Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)" r8169: use hardware auto-padding. igb: remove ASPM L0s workaround netxen: remove old flash check. mv643xx_eth: fix unicast address filter corruption on mtu change xfrm: Fix xfrm_state_find() wrt. wildcard source address. emac: Fix clock control for 405EX and 405EXr chips ixgbe: fix multiple unicast address support via-velocity: Fix DMA mapping length errors on transmit. qlge: bugfix: Pad outbound frames smaller than 60 bytes. qlge: bugfix: Move netif_napi_del() to common call point. qlge: bugfix: Tell hw to strip vlan header. qlge: bugfix: Increase filter on inbound csum. dnet: replace obsolete *netif_rx_* functions with *napi_* net: Add be2net driver. dnet: Fix warnings on 64-bit. dnet: Dave DNET ethernet controller driver (updated) ipv6: Fix BUG when disabled ipv6 module is unloaded bnx2x: Using DMAE to initialize the chip bnx2x: Casting page alignment ...
2009-03-16linux.conf.au 2009: TuzRusty Russell
Impact: help prevent extinction of species The Tasmanian Devil is a shy iconic Australian creature named for its spine-chilling screech. It is threatened with extinction due to a scientifically interesting but horrific transmissible facial cancer. This one is standing in for Tux for one release using the far less-known Devil Facial Tux Disguise. Save The Tasmanian Devil http://tassiedevil.com.au Signed-off-by: Linux.conf.au Hobart Team <contact@marchsouth.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-16Merge branches 'misc-up-now' and 'platform-drivers' into releaseLen Brown
2009-03-16acpi-wmi: unsigned cannot be less than 0Roel Kluin
include/linux/pci-acpi.h:74: typedef u32 acpi_status; result is unsigned, so an error returned by acpi_bus_register_driver() will not be noticed. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16thinkpad-acpi: fix module autoloading for older modelsMathieu Chouquet-Stringer
Looking at the source, there seems to be a missing * to match my DMI string. I mean for newer IBM and Lenovo's laptops you match either one of the following: MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); While for older Thinkpads, you do this (for instance): IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); with IBM_BIOS_MODULE_ALIAS being MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") Note there's no * terminating the string. As result, udev doesn't load anything because modprobe cannot find anything matching this (my machine actually): udevtest: run: '/sbin/modprobe dmi:bvnIBM:bvr1IET71WW(2.10):bd06/16/2006:svnIBM:pn236621U:pvrNotAv Signed-off-by: Mathieu Chouquet-Stringer <mchouque@free.fr> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16acer-wmi: Unmark as 'experimental'Carlos Corbacho
This driver has been around and used long enough that we can drop the 'experimental'. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16acpi-wmi: Unmark as 'experimental'Carlos Corbacho
ACPI-WMI isn't experimental anymore, and there are other drivers that now depend on it that aren't either. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16acer-wmi: double free in acer_rfkill_exit()Dan Carpenter
This is acer_rfkill_exit() from drivers/platform/x86/acer-wmi.c. The code frees wireless_rfkill->data again instead of bluetooth_rfkill->data. This was found using a code checker (http://repo.or.cz/w/smatch.git/). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16platform/x86: depends instead of select for laptop platform driversCorentin Chary
"I hate `select' and will gleefully leap on any s/select/depends/ patch, whether it works or not :)" Andrew Morton select INPUT is not needed here, because if someone doesn't want INPUT, he won't want these drivers either. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16asus-laptop: use select instead of depends onCorentin Chary
Like thinkpad_acpi or eeepc-laptop, asus-laptop will now use "select" instead of "depends on" for LEDS_CLASS, NEW_LEDS and BACKLIGHT_CLASS_DEVICE Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16eeepc-laptop: restore acpi_generate_proc_event()Corentin Chary
Restore acpi_generate_proc_event() for backward compatibility with old acpi scripts. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16asus-laptop: restore acpi_generate_proc_event()Corentin Chary
Restore acpi_generate_proc_event() for backward compatibility with old acpi scripts. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16acpi: check for pxm_to_node_map overflowCyrill Gorcunov
It is hardly (if ever) possible but in case of broken _PXM entry we could reach out of pxm_to_node_map array bounds in acpi_map_pxm_to_node() call. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16ACPI: remove doubled status checkingJiri Slaby
There was a misplaced status test (two consequent tests without a statement in between) in acpi_bus_init for ages. Remove it, since the function which should be checked (acpi_os_initialize1) has BUG_ONs on failure paths. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16ACPI suspend: Blacklist Toshiba Satellite L300 that requires to set SCI_EN ↵Zhang Rui
directly on resume This is a supplement of commit 65df78473ffbf3bff5e2034df1638acc4f3ddd50. http://bugzilla.kernel.org/show_bug.cgi?id=12798 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16Revert "ACPI: make some IO ports off-limits to AML"Len Brown
This reverts commit 5ec5d38a1c8af255ffc481c81eef13e9155524b3. because it caused spurious dmesg warmings. We'll implement the check for off-limit ports in a more clever way in the future. http://bugzilla.kernel.org/show_bug.cgi?id=12758 Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16suspend: switch the Asus Pundit P1-AH2 to old ACPI sleep orderingAndy Whitcroft
Switch the Asus Pundit P1-AH2 (M2N8L motherboard) to the old ACPI 1.0 sleep ordering by default. Without this it will not suspend/resume correctly. Signed-off-by: Andy Whitcroft <apw@canonical.com> Tested-by: Dustin Kirkland <kirkland@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-15r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"françois romieu
It fails on the following systems: - RTL8169sc/8110sc (XID 18000000) reported by Tim Durack <tdurack@gmail.com> (x86) - RTL8169sb/8110sb (XID 10000000) reported by Mikael Pettersson <mikpe@it.uu.se> (ARM) The patch appeared to work on x86 for the following systems: RTL8169sb/8110sb 10000000 PCI (EXT) RTL8110s 04000000 PCI (EXT) RTL8102e 24a00000 PCI-E (LOM) RTL8168c/8111c 3c2000c0 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (LOM) RTL8168b/8111b 38000000 PCI-E (EXT) The patch exposes two problems: 1) while not completely wrong, mac addresses are not read correctly from the EEPROM 2) the MAC address registers are not correctly set Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15r8169: use hardware auto-padding.françois romieu
It shortens the code and fixes the current pci_unmap leak with padded skb reported by Dave Jones. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-25 19:20:43 +0000