aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-12-09oprofile: Fix crash when unloading module (hr timer mode)Robert Richter
commit 87121ca504fd1d963a66b3fb0c72054b0fd9a177 upstream. Oprofile may crash in a KVM guest while unlaoding modules. This happens if oprofile_arch_init() fails and oprofile switches to the hr timer mode as a fallback. In this case oprofile_arch_exit() is called, but it never was initialized properly which causes the crash. This patch fixes this. oprofile: using timer interrupt. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 PGD 41da3f067 PUD 41d80e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP CPU 5 Modules linked in: oprofile(-) Pid: 2382, comm: modprobe Not tainted 3.1.0-rc7-00018-g709a39d #18 Advanced Micro Device Anaheim/Anaheim RIP: 0010:[<ffffffff8123c226>] [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP: 0018:ffff88041de1de98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffffffa00060e0 RCX: dead000000200200 RDX: 0000000000000000 RSI: dead000000100100 RDI: ffffffff8178c620 RBP: ffff88041de1dea8 R08: 0000000000000001 R09: 0000000000000082 R10: 0000000000000000 R11: ffff88041de1dde8 R12: 0000000000000080 R13: fffffffffffffff5 R14: 0000000000000001 R15: 0000000000610210 FS: 00007f9ae5bef700(0000) GS:ffff88042fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000041ca44000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2382, threadinfo ffff88041de1c000, task ffff88042db6d040) Stack: ffff88041de1deb8 ffffffffa0006770 ffff88041de1deb8 ffffffffa000251e ffff88041de1dec8 ffffffffa00022c2 ffff88041de1ded8 ffffffffa0004993 ffff88041de1df78 ffffffff81073115 656c69666f72706f 0000000000610200 Call Trace: [<ffffffffa000251e>] op_nmi_exit+0x15/0x17 [oprofile] [<ffffffffa00022c2>] oprofile_arch_exit+0xe/0x10 [oprofile] [<ffffffffa0004993>] oprofile_exit+0x13/0x15 [oprofile] [<ffffffff81073115>] sys_delete_module+0x1c3/0x22f [<ffffffff811bf09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8148070b>] system_call_fastpath+0x16/0x1b Code: 20 c6 78 81 e8 c5 cc 23 00 48 8b 13 48 8b 43 08 48 be 00 01 10 00 00 00 ad de 48 b9 00 02 20 00 00 00 ad de 48 c7 c7 20 c6 78 81 89 42 08 48 89 10 48 89 33 48 89 4b 08 e8 a6 c0 23 00 5a 5b RIP [<ffffffff8123c226>] unregister_syscore_ops+0x41/0x58 RSP <ffff88041de1de98> CR2: 0000000000000008 ---[ end trace 06d4e95b6aa3b437 ]--- Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09rtc: Disable the alarm in the hardwareRabin Vincent
commit c0afabd3d553c521e003779c127143ffde55a16f upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09xHCI: fix bug in xhci_clear_command_ring()Andiry Xu
commit 158886cd2cf4599e04f9b7e10cb767f5f39b14f1 upstream. When system enters suspend, xHCI driver clears command ring by writing zero to all the TRBs. However, this also writes zero to the Link TRB, and the ring is mangled. This may cause driver accesses wrong memory address and the result is unpredicted. When clear the command ring, keep the last Link TRB intact, only clear its cycle bit. This should fix the "command ring full" issue reported by Oliver Neukum. This should be backported to stable kernels as old as 2.6.37, since the commit 89821320 "xhci: Fix command ring replay after resume" is merged. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09EHCI : Fix a regression in the ISO schedulerMatthieu CASTET
commit e3420901eba65b1c46bed86d360e3a8685d20734 upstream. Fix a regression that was introduced by commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 (USB: EHCI: fix HUB TT scheduling issue with iso transfer). We detect an error if next == start, but this means uframe 0 can't be allocated anymore for iso transfer... Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin
commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: usb-storage: unusual_devs entry for Kingston DT 101 G2Qinglin Ye
commit cec28a5428793b6bc64e56687fb239759d6da74e upstream. Kingston DT 101 G2 replies a wrong tag while transporting, add an unusal_devs entry to ignore the tag validation. Signed-off-by: Qinglin Ye <yestyle@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: option: add SIMCom SIM5218Veli-Pekka Peltola
commit ec0cd94d881ca89cc9fb61d00d0f4b2b52e605b3 upstream. Tested with SIM5218EVB-KIT evaluation kit. Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: option: add Huawei E353 controlling interfacesDirk Nehring
commit 46b1848360c8e634e0b063932a1261062fa0f7d6 upstream. This patch creates the missing controlling devices for the Huawei E353 HSPA+ stick. Signed-off-by: Dirk Nehring <dnehring@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09usb: ftdi_sio: add PID for Propox ISPcable IIIMarcin Kościelnicki
commit 307369b0ca06b27b511b61714e335ddfccf19c4f upstream. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09HID: Correct General touch PIDBenjamin Tissoires
commit b1807719f6acdf18cc4bde3b5400d05d77801494 upstream. Genera Touch told us that 0001 is their single point device and 0003 is the multitouch one. Apparently, we made the tests someone having a prototype, and not the final product. They said it should be safe to do the switch. This partially reverts 5572da0 ("HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'"). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09USB: whci-hcd: fix endian conversion in qset_clear()Dan Carpenter
commit 8746c83d538cab273d335acb2be226d096f4a5af upstream. qset->qh.link is an __le64 field and we should be using cpu_to_le64() to fill it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09Staging: comedi: fix signal handling in read and writeFederico Vaga
commit 6a9ce6b654e491981f6ef7e214cbd4f63e033848 upstream. After sleeping on a wait queue, signal_pending(current) should be checked (not before sleeping). Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09Staging: comedi: fix mmap_countFederico Vaga
commit df30b21cb0eed5ba8a8e0cdfeebc66ba8cde821d upstream. In comedi_fops, mmap_count is decremented at comedi_vm_ops->close but it is not incremented at comedi_vm_ops->open. This may result in a negative counter. The patch introduces the open method to keep the counter consistent. The bug was triggerd by this sample code: mmap(0, ...., comedi_fd); fork(); exit(0); Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09staging: comedi: fix oops for USB DAQ devices.Bernd Porr
commit 3ffab428f40849ed5f21bcfd7285bdef7902f9ca upstream. This fixes kernel oops when an USB DAQ device is plugged out while it's communicating with the userspace software. Signed-off-by: Bernd Porr <berndporr@f2s.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09staging: usbip: bugfix for deadlockBart Westgeest
commit 438957f8d4a84daa7fa5be6978ad5897a2e9e5e5 upstream. Interrupts must be disabled prior to calling usb_hcd_unlink_urb_from_ep. If interrupts are not disabled, it can potentially lead to a deadlock. The deadlock is readily reproduceable on a slower (ARM based) device such as the TI Pandaboard. Signed-off-by: Bart Westgeest <bart@elbrys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Fix endianess issuesLars-Peter Clausen
commit bda63586bc5929e97288cdb371bb6456504867ed upstream. Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Skip header during CRC generationLars-Peter Clausen
commit c56935bdc0a8edf50237d3b0205133a5b0adc604 upstream. The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09firmware: Sigma: Prevent out of bounds memory accessLars-Peter Clausen
commit 4f718a29fe4908c2cea782f751e9805319684e2b upstream. The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: add some loop timeouts in pageflip codeAlex Deucher
commit f64964796dedca340608fb1075ab6baad5625851 upstream. Avoid infinite loops waiting for surface updates if a GPU reset happens while waiting for a page flip. See: https://bugs.freedesktop.org/show_bug.cgi?id=43191 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09SCSI: Silencing 'killing requests for dead queue'Hannes Reinecke
commit 745718132c3c7cac98a622b610e239dcd5217f71 upstream. When we tear down a device we try to flush all outstanding commands in scsi_free_queue(). However the check in scsi_request_fn() is imperfect as it only signals that we _might start_ aborting commands, not that we've actually aborted some. So move the printk inside the scsi_kill_request function, this will also give us a hint about which commands are aborted. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09revert "mfd: Fix twl4030 dependencies for audio codec"Greg Kroah-Hartman
This reverts commit 11b8fc6ae54bf18a48c94e181c37ca135b858b42, which was commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream. Koen Kooi <koen@dominion.thruhere.net> reports that this shouldn't have been applied to the 3.0 kernel as it isn't relevant there, only 3.1. Reported-by: Koen Kooi <koen@dominion.thruhere.net> Cc: Thomas Weber <weber@corscience.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09hwmon: (coretemp) Fix oops on driver loadJean Delvare
This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. If the CPU microcode is too old, the coretemp driver won't work. But instead of failing gracefully, it currently oops. Check for NULL platform device data to avoid this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09rt2x00: Fix efuse EEPROM reading on PPC32.Gertjan van Wingerde
commit 68fa64ef606bcee688fce46d07aa68f175070156 upstream. Fix __le32 to __le16 conversion of the first word of an 8-word block of EEPROM read via the efuse method. Reported-and-tested-by: Ingvar Hagelund <ingvar@redpill-linpro.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09p54spi: Fix workqueue deadlockMichael Büsch
commit 2d1618170eb493d18f66f2ac03775409a6fb97c6 upstream. priv->work must not be synced while priv->mutex is locked, because the mutex is taken in the work handler. Move cancel_work_sync down to after the device shutdown code. This is safe, because the work handler checks fw_state and bails out early in case of a race. Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09p54spi: Add missing spin_lock_initMichael Büsch
commit 32d3a3922d617a5a685a5e2d24b20d0e88f192a9 upstream. The tx_lock is not initialized properly. Add spin_lock_init(). Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09viafb: correct sync polarity for OLPC DCONDaniel Drake
commit a32839696a8eef813a1aff604fbad9a32dff6c95 upstream. While the OLPC display appears to be able to handle either positive or negative sync, the Display Controller only recognises positive sync. This brings viafb (for XO-1.5) in line with lxfb (for XO-1) and fixes a recent regression where the XO-1.5 DCON could no longer be frozen. Thanks to Florian Tobias Schandinat for helping identify the fix. Test case: from a vt, echo 1 > /sys/devices/platform/dcon/freeze should cause the current screen contents to freeze, rather than garbage being displayed. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: fix up gpio i2c mask bits for r4xxAlex Deucher
commit 6c47e5c23aa2a7c54ad7ac13af4bd56cd9e703bf upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDsBjorn Helgaas
commit 4cac2eb158c6da0c761689345c6cc5df788a6292 upstream. Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung <ralfjung-e@gmx.de> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: fix CB tuning check for ILK+Jesse Barnes
commit cb0e093162d7b6589c2217a00e2abfef686b32d6 upstream. CB tuning is needed to handle potential process variations that might cause clock jitter for certain PLL settings. However, we were setting it incorrectly since we were using the wrong M value as a check (M1 when we needed to use the whole M value). Fix it up, making my HDMI attached display a little prettier (used to have occasional dots crawl across the display). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Timo Aaltonen <timo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/ttm: request zeroed system memory pages for new TT buffer objectsBen Skeggs
commit ff02b13f6867af72682d7a9bb9bd705f9af2bab0 upstream. Fixes an information leak to userspace, we were handing out un-zeroed pages for any newly created TTM_PL_TT buffer. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Turn on another required clock gating bit on gen6.Eric Anholt
commit 9ca1d10d748e56964de95e3ed80211b192f56cf4 upstream. Unlike the previous one, I don't have known testcases it fixes. I'd rather not go through the same debug cycle on whatever testcases those might be. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Turn on a required 3D clock gating bit on Sandybridge.Eric Anholt
commit 406478dc911e16677fbd9c84d1d50cdffbc031ab upstream. Fixes rendering failures in Unigine Tropics and Sanctuary and the mesa "fire" demo. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/i915: Ivybridge still has fences!Daniel Vetter
commit 775d17b6ca4357048f36c22151335addfe15db4b upstream. So don't forget to restore them on resume and dump them into the error state. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm/radeon/kms: fix up gpio i2c mask bits for r4xx for realAlex Deucher
commit d724502a9d7a46f4a56a1663b1f50d2dc9d1ef40 upstream. Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drm: integer overflow in drm_mode_dirtyfb_ioctl()Xi Wang
commit a5cd335165e31db9dbab636fd29895d41da55dd2 upstream. There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09crypto: mv_cesa - fix hashing of chunks > 1920 bytesPhil Sutter
commit 274252862f386b7868f35bf5ceaa5391a8ccfdf3 upstream. This was broken by commit 7759995c75ae0cbd4c861582908449f6b6208e7a (yes, myself). The basic problem here is since the digest state is only saved after the last chunk, the state array is only valid when handling the first chunk of the next buffer. Broken since linux-3.0. Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09i2c-algo-bit: Generate correct i2c address sequence for 10-bit targetJeffrey (Sheng-Hui) Chu
commit cc6bcf7d2ec2234e7b41770185e4dc826390185e upstream. The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-29Revert "USB: EHCI: fix HUB TT scheduling issue with iso transfer"Greg Kroah-Hartman
This reverts commit 317451c11fefcb0e05383f0a0080bb7f5445cfcf. Cc: Matthieu Castet <matthieu.castet@parrot.com> Cc: Thomas Poussevin <thomas.poussevin@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26drm/i915: always set FDI composite sync bitJesse Barnes
commit c4f9c4c2b3f1831e932e04db992cf6fe92c2a95a upstream. It's needed for 3 pipe support as well as just regular functionality (e.g. DisplayPort). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Adam Jackson <ajax@redhat.com> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Robert Hooker <robert.hooker@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26drm/i915: fix IVB cursor supportJesse Barnes
commit 65a21cd65316145f9302594be8e69074369e1050 upstream. The cursor regs have moved around, add the offsets and new macros for getting at them. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Robert Hooker <robert.hooker@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: quirks: adding more quirky webcams to avoid squeaky audiosordna
commit 0d145d7d4a241c321c832a810bb6edad18e2217b upstream. The following patch contains additional affected webcam models, on top of the patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc Signed-off-by: sordna <sordna@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: add quirk for Logitech C600 web camJosh Boyer
commit 60c71ca972a2dd3fd9d0165b405361c8ad48349b upstream. We've had another report of the "chipmunk" sound on a Logitech C600 webcam. This patch resolves the issue. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: EHCI: fix HUB TT scheduling issue with iso transferThomas Poussevin
commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream. The current TT scheduling doesn't allow to play and then record on a full-speed device connected to a high speed hub. The IN iso stream can only start on the first uframe (0-2 for a 165 us) because of CSPLIT transactions. For the OUT iso stream there no such restriction. uframe 0-5 are possible. The idea of this patch is that the first uframe are precious (for IN TT iso stream) and we should allocate the last uframes first if possible. For that we reverse the order of uframe allocation (last uframe first). Here an example : hid interrupt stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 125 | 39 | 0 | 0 | 0 | 0 | 0 | ---------------------------------------------------------------------- There no place for iso IN stream (uframe 0-2 are used) and we got "cannot submit datapipe for urb 0, error -28: not enough bandwidth" error. With the patch this become. iso OUT stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 0 | 0 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- iso IN stream ---------------------------------------------------------------------- uframe | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ---------------------------------------------------------------------- max_tt_usecs | 125 | 125 | 125 | 125 | 125 | 125 | 30 | 0 | ---------------------------------------------------------------------- used usecs on a frame | 13 | 0 | 125 | 40 | 125 | 39 | 0 | 0 | ---------------------------------------------------------------------- Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26usb-storage: Accept 8020i-protocol commands longer than 12 bytesAlan Stern
commit 2f640bf4c94324aeaa1b6385c10aab8c5ad1e1cf upstream. The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands; shorter commands must be padded. Simon Detheridge reports that his 3-TB USB disk drive claims to use the 8020i protocol (which is normally meant for ATAPI devices like CD drives), and because of its large size, the disk drive requires the use of 16-byte commands. However the usb_stor_pad12_command() routine in usb-storage always sets the command length to 12, making the drive impossible to use. Since the SFF-8020i specification allows for 16-byte commands in future extensions, we may as well accept them. This patch (as1490) changes usb_stor_pad12_command() to leave commands larger than 12 bytes alone rather than truncating them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Simon Detheridge <simon@widgit.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: Fix Corruption issue in USB ftdi driver ftdi_sio.cAndrew Worsley
commit b1ffb4c851f185e9051ba837c16d9b84ef688d26 upstream. Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: ark3116 initialisation fixBart Hartgers
commit 583182ba5f02c8c9be82ea550f2051eaec15b975 upstream. This patch for the usb serial ark3116 driver fixes an initialisation ordering bug that gets triggered on hotplug when using at least recent debian/ubuntu userspace. Without it, ark3116 serial cables don't work. Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com> Tested-by: law_ence.dev@ntlworld.com Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: workaround for bug in old version of GCCAlan Stern
commit 97ff22ee3b4cb3a334f7385e269773141aed702f upstream. This patch (as1491) works around a bug in GCC-3.4.6, which is still supposed to be supported. The number of microseconds in the udelay() call in quirk_usb_disable_ehci() is fixed at 100, but the compiler doesn't understand this and generates a link-time error. So we replace the otherwise unused variable "delta" with a simple constant 100. This same pattern is already used in other delay loops in that source file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Konrad Rzepecki <krzepecki@dentonet.pl> Tested-by: Konrad Rzepecki <krzepecki@dentonet.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: cdc-acm: Fix disconnect() vs close() raceHavard Skinnemoen
commit 5dc2470c602da8851907ec18942cd876c3b4ecc1 upstream. There's a race between the USB disconnect handler and the TTY close handler which may cause the acm object to be freed while it's still being used. This may lead to things like http://article.gmane.org/gmane.linux.usb.general/54250 and https://lkml.org/lkml/2011/5/29/64 This is the simplest fix I could come up with. Holding on to open_mutex while closing the TTY device prevents acm_disconnect() from freeing the acm object between acm->port.count drops to 0 and the TTY side of the cleanups are finalized. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: serial: pl2303: rm duplicate idwangyanqing
commit 0c16595539b612fe948559433dda08ff96a8bdc7 upstream. I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by: Wang YanQing <Udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26USB: option: add PID of Huawei E173s 3G modemFerenc Wagner
commit 4aa3648c719265bac9c2742c9ebb043e6dbdd790 upstream. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-28 08:01:46 +0000