aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-02-05[PPP]: Fixed hardware RX checksum handlingHerbert Xu
When we pull the PPP protocol off the skb, we forgot to update the hardware RX checksum. This may lead to messages such as dsl0: hw csum failure. Similarly, we need to clear the hardware checksum flag when we use the existing packet to store the decompressed result. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05[PATCH] USB: Fix GPL markings on usb core functions.Greg KH
I thought we had fixed up all non-gpl USB drivers, and was wrong to do this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] pktcdvd: Don't waste kernel memoryPeter Osterlund
Allocate memory for read-gathering at open time, when it is known just how much memory is needed. This avoids wasting kernel memory when the real packet size is smaller than the maximum packet size supported by the driver. This is always the case when using DVD discs. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] Let CDROM_PKTCDVD_WCACHE depend on EXPERIMENTALAdrian Bunk
Unless the help text is outdated, this seems to be logical. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] pktcdvd: remove version stringPeter Osterlund
The version information is not useful for a driver that is maintained in Linus' kernel tree. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] pktcdvd: Fix overflow for discs with large packetsPhillip Susi
The pktcdvd driver was using an 8 bit field to store the packet length obtained from the disc track info. This causes it to overflow packet length values of 128KB or more. I changed the field to 32 bits to fix this. The pktcdvd driver defaulted to its maximum allowed packet length when it detected a 0 in the track info field. I changed this to fail the operation and refuse to access the media. This seems more sane than attempting to access it with a value that almost certainly will not work. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] Fix i2o_scsi oops on abortMarkus Lidel
Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923 When a scsi command failed, an oops would result. Back-to-back SMART queries would make the Seagate drives unhappy. The second SMART query would timeout, and the command would be aborted. Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Kenny Simpson <theonetruekenny@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] percpu data: only iterate over possible CPUsEric Dumazet
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: William Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: data/functions wrongly marked as __init with cpu hotplug.Ashok Raj
attached patch is 2 more cases i found via running the reference_init.pl script. These were easy to spot just knowing the file names. There is one another about init/main.c that i cant exactly zero in. (partly because i dont know how to interpret the data thats spewed out of the tool). Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Remove rogue default y in EDAC KconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Only switch to IPI broadcast timer on Intel when C3 is supportedVenkatesh Pallipadi
Bug in apic timer removal on C3 patch. We should switch to IPI from APIC timer only when C3 state is valid. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
2006-02-03Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2006-02-03Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2006-02-03[SERIAL] 8250: limit range of runtime portsRussell King
Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-02-03[PATCH] IDE: always enable CONFIG_PDC202XX_FORCEAdrian Bunk
Remove the CONFIG_PDC202XX_FORCE=n case. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] RocketPoint 1520 [hpt366] fails clock stabilizationLoren M. Lang
I just purchased a HighPoint Rocket 1520 SATA controller. There seems to be no libata driver (yet), but there is an ide driver, hpt366. When the driver gets loaded, it causes a kernel NULL pointer dereference in pci_bus_clock_list. It seems to be because the driver is waiting for clock stabilization in init_hpt37x() which never comes. The driver just continues on with the pci drvdata set to NULL, instead of a valid clock entry. The following patch prevents the NULL dereference from happening, but instead exit with an error. Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ide: set latency when resetting it821x out of firmware modeAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ide-disk: Restore missing space in log messageJean Delvare
Restore a missing space in a log message, which was accidentally removed by a previous change: 3e087b575496b8aa445192f58e7d996b1cdfa121 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <axboe@suse.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] drivers/ide/ide-io.c: make __ide_end_request() staticAdrian Bunk
Since there's no longer any external user, we can make __ide_end_request() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] solve false-positive soft lockup messages during IDE initIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rogio Brito <rbrito@ime.usp.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] stop CompactFlash devices being marked as removableRichard Purdie
This patch stops CompactFlash devices being marked as removable. They are not removable (as defined by Linux) as the media and device are inseparable. When a card is removed, the whole device is removed from the system and never sits in a media-less state. This stops some nasty udev device creation/destruction loops. Further, once this change is made, there is no need for ide to can be removed from ide_drive_t. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ide Kconfig fixesAndreas Mohr
CONFIG_BLK_DEV_IDECS docu mentions everything and the kitchen sink, yet fails to list the most important/widespread (IMHO) device: Compact Flash PCMCIA adapters. This incomplete description recently caused me to deselect the ide_cs module, causing great pain soon thereafter when I realized why I had actually enabled it some years ago. Updates: - make sure to mention Compact Flash adapters - fix some random typos in ide Kconfig Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ia64: drop arch-specific IDE MAX_HWIFS definitionBjorn Helgaas
There's no reason MAX_HWIFS needs to be ia64-specific, so set MAX_HWIFS from CONFIG_IDE_MAX_HWIFS. This reduces the default from 10 to 4, but I don't think that's a problem. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] piix: add Intel ICH8M device IDsJason Gaston
Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] IPMI: fix issues reported by Coverity in ipmi_msghandler.cJayachandran C
While looking to the report by Coverity in ipmi, I came across the following issue: The IPMI message handler relies on two defines which are the same -one in include/linux/ipmi.h #define IPMI_NUM_CHANNELS 0x10 and one in drivers/char/ipmi/ipmi_msghandler. #define IPMI_MAX_CHANNELS 16 These are used interchangeably in ipmi_msghandler.c, but since the array addr->channels[] is of size IPMI_MAX_CHANNELS, I have made a patch that uses IPMI_MAX_CHANNELS for all the checks for the array index. NOTE: You could probably remove the line that defines IPMI_NUM_CHANNELS from ipmi.h, or move IPMI_MAX_CHANNELS to ipmi.h Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] i4l: warning fixesKarsten Keil
drivers/isdn/hisax/hscx_irq.c: In function `hscx_interrupt': drivers/isdn/hisax/hscx_irq.c:201: warning: comparison is always 1 due to width of bit-field It's due to (PACKET_NOACK != bcs->tx_skb->pkt_type) pkt_type is only three bit wide. I think this should fix it for the moment, pkt_type 7 is not used yet and this is only used internal in hisax. Signed-off-by: Karsten keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ip2main.c warning fixesAndrew Morton
With Eric's "i386: Add a temporary to make put_user more type safe" patch we get a pile of warnings out of ip2m1in.c: drivers/char/ip2main.c: In function `ip2_ipl_ioctl': drivers/char/ip2main.c:2910: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2911: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2912: warning: assignment makes integer from pointer without a cast etc. This ioctl is copying the kernel virtual address of a large number of functions out to userspace. Heaven knows why. Rather than fixing the warnings, I think we'll just nuke that code. The patch also fixes a couple of `defined but not used' warnings. Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] edac_mc: Remove include of version.hEric W. Biederman
By including version.h edac_mc was rebuilding on every incremental build. Which defeats the point of incremental builds. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] new tty buffering locking fixPaul Fulghum
Change locking in the new tty buffering facility from using tty->read_lock, which is currently ignored by drivers and thus ineffective. New locking uses a new tty buffering specific lock enforced centrally in the tty buffering code. Two drivers (esp and cyclades) are updated to use the tty buffering functions instead of accessing tty buffering internals directly. This is required for the new locking to work. Minor checks for NULL buffers added to tty_prepare_flip_string/tty_prepare_flip_string_flags Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ipmi: mem_{in,out}[bwl] => intf_mem_{in,out}[bwl]Alexey Dobriyan
On mips: drivers/char/ipmi/ipmi_si_intf.c:1274: error: conflicting types for 'mem_inb' include/asm/io.h:436: error: previous definition of 'mem_inb' was here Don't look at line 436 unless you really know what you're doing. Move those static functions out of more or less generic namespace. Signed-off-by: Alexey "## should be banned" Dobriyan <adobriyan@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] Export cpu topology in sysfsZhang, Yanmin
The patch implements cpu topology exportation by sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: represent the physical package id of cpu X; 2) /sys/devices/system/cpu/cpuX/topology/core_id: represent the cpu core id to cpu X; 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: represent the thread siblings to cpu X in the same core; 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: represent the thread siblings to cpu X in the same physical package; To implement it in an architecture-neutral way, a new source file, driver/base/topology.c, is to export the 5 attributes. If one architecture wants to support this feature, it just needs to implement 4 defines, typically in file include/asm-XXX/topology.h. The 4 defines are: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) #define topology_thread_siblings(cpu) #define topology_core_siblings(cpu) The type of **_id is int. The type of siblings is cpumask_t. To be consistent on all architectures, the 4 attributes should have deafult values if their values are unavailable. Below is the rule. 1) physical_package_id: If cpu has no physical package id, -1 is the default value. 2) core_id: If cpu doesn't support multi-core, its core id is 0. 3) thread_siblings: Just include itself, if the cpu doesn't support HT/multi-thread. 4) core_siblings: Just include itself, if the cpu doesn't support multi-core and HT/Multi-thread. So be careful when declaring the 4 defines in include/asm-XXX/topology.h. If an attribute isn't defined on an architecture, it won't be exported. Thank Nathan, Greg, Andi, Paul and Venki. The patch provides defines for i386/x86_64/ia64. Signed-off-by: Zhang, Yanmin <yanmin.zhang@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] ixj: fix writing silence checkAlexey Dobriyan
j->write_buffer_rp is a pointer. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] drivers/serial/jsm/: cleanupsAdrian Bunk
- jsm_driver.c: remove the now unused jsm_rawreadok module_param - jsm_tty.c: remove a now unused variable Is there any problem with removing the now useless jsm_rawreadok module_param? Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] jsm: update for tty buffering revampV. Ananda Krishnan
Signed-off-by: V. Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] I2O: fix and workaround for Motorola/Freescale controllerMarkus Lidel
- This controller violates the I2O spec for the I/O registers. The patch contains a workaround which moves the registers to the proper location. (originally author: Matthew Starzewski) - If a message frame is beyond the mapped address range a error is returned. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] I2O: don't disable PCI device if it is enabled before probingMarkus Lidel
If PCI device is enabled before probing, it will not be disabled at exit. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] edac: use C99 initializers (sparse warnings)Randy Dunlap
drivers/edac/e752x_edac.c:1042:7: warning: obsolete struct initializer, use C99 syntax Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] parport: fix documentationArnaud Giersch
Fix documentation to actually match the code. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] parport: add parallel port support for SGI O2Arnaud Giersch
Add support for the built-in parallel port on SGI O2 (a.k.a. IP32). Define a new configuration option: PARPORT_IP32. The module is named parport_ip32. Hardware support for SPP, EPP and ECP modes along with DMA support when available are currently implemented. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] drivers/isdn/sc/ioctl.c: copy_from_user() size fixDomen Puncer
A few lines above the patch we have: char *srec; srec = kmalloc(SCIOC_SRECSIZE, GFP_KERNEL); sizeof pointer is probably not meant here. Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] umem: check pci_set_dma_mask return value correctlyTobias Klauser
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] EDAC config cleanupDave Jones
The AMD76x chipsets aren't used in 64-bit, so don't offer the driver to the user. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] Fix some ucLinux breakage from the tty updatesAlan Cox
Breakage reported by Adrian Bunk Untested (no hardware) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] rio cleanupsAlan Cox
INKERNEL is always defined HOST is never defined therefore RTA is also never defined Strip the relevant garbage out of the headers on this basis. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] sx.c printk warning fixesAndrew Morton
drivers/char/sx.c: In function `sx_set_real_termios': drivers/char/sx.c:934: warning: long unsigned int format, different type arg (arg 2) drivers/char/sx.c:961: warning: long unsigned int format, different type arg (arg 2) drivers/char/sx.c:976: warning: long unsigned int format, different type arg (arg 2) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] parport_serial: printk warning fixAndrew Morton
drivers/parport/parport_serial.c: In function `parport_register': drivers/parport/parport_serial.c:334: warning: unsigned int format, different type arg (arg 3) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] parport: fix printk format warningRandy Dunlap
Fix printk format warning: drivers/parport/probe.c:205: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] SBC EPX does not check/claim I/O ports it uses (2nd Edition)Alan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>