aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-02-20hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375Nikolaus Schulz
commit 09e87e5c4f9af656af2a8a3afc03487c5d9287c3 upstream. In order to enable temperature mode aka automatic mode for the F75373 and F75375 chips, the two FANx_MODE bits in the fan configuration register need be set to 01, not 10. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-20gpio/pca953x: Fix warning of enabled interrupts in handlerDavid Jander
commit 6dd599f8af0166805951f4421a78ba716d78321a upstream. When using nested threaded irqs, use handle_nested_irq(). This function does not call the chip handler, so no handler is set. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Manfred Gruber <m.gruber@unverspurt.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-20hwmon: (f75375s) Fix bit shifting in f75375_write16Nikolaus Schulz
commit eb2f255b2d360df3f500042a2258dcf2fcbe89a2 upstream. In order to extract the high byte of the 16-bit word, shift the word to the right, not to the left. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-20drm/i915: no lvds quirk for AOpen MP45Daniel Vetter
commit e57b6886f555ab57f40a01713304e2053efe51ec upstream. According to a bug report, it doesn't have one. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13net: fix NULL dereferences in check_peer_redir()Eric Dumazet
[ Upstream commit d3aaeb38c40e5a6c08dd31a1b64da65c4352be36, along with dependent backports of commits: 69cce1d1404968f78b177a0314f5822d5afdbbfb 9de79c127cccecb11ae6a21ab1499e87aa222880 218fa90f072e4aeff9003d57e390857f4f35513e 580da35a31f91a594f3090b7a2c39b85cb051a12 f7e57044eeb1841847c24aa06766c8290c202583 e049f28883126c689cf95859480d9ee4ab23b7fa ] Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925dbde778 (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by: Gergely Kalman <synapse@hippy.csoma.elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13powernow-k8: Fix indexing issueAndreas Herrmann
commit a8eb28480e9b637cc78b9aa5e08612ba97e1317a upstream. The driver uses the pstate number from the status register as index in its table of ACPI pstates (powernow_table). This is wrong as this is not a 1-to-1 mapping. For example we can have _PSS information to just utilize Pstate 0 and Pstate 4, ie. powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 4 (1400 MHz) In this example the driver's powernow_table has just 2 entries. Using the pstate number (4) as index into this table is just plain wrong. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13powernow-k8: Avoid Pstate MSR accesses on systems supporting CPBAndreas Herrmann
commit 201bf0f129e1715a33568d1563d9a75b840ab4d3 upstream. Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chipAxel Lin
commit b5266ea675c5a041e2852c7ccec4cf2d4f5e0cf4 upstream. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13USB: add new zte 3g-dongle's pid to option.cRui li
commit 1608ea5f4b5d6262cd6e808839491cfb2a67405a upstream. As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li <li.rui27@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13USB: usbserial: add new PID number (0xa951) to the ftdi driverMilan Kocian
commit 90451e6973a5da155c6f315a409ca0a8d3ce6b76 upstream. Signed-off-by: Milan Kocian <milon@wq.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13usb: Skip PCI USB quirk handling for Netlogic XLPJayachandran C
commit e4436a7c17ac2b5e138f93f83a541cba9b311685 upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13usb: gadget: zero: fix bug in loopback autoresume handlingTimo Juhani Lindfors
commit 683da59d7b8ae04891636d4b59893cd4e9b0b7e5 upstream. ab943a2e125b (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13staging: r8712u: Add new Sitecom UsB IDLarry Finger
commit 1793bf1deddc8ce25dc41925d5dbe64536c841b6 upstream. Add USB ID for SITECOM WLA-1000 V1 001 WLAN Reported-and-tested-by: Roland Gruber <post@rolandgruber.de> Reported-and-tested-by: Dario Lucia <dario.lucia@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13Staging: asus_oled: fix NULL-ptr crash on unloadingPekka Paalanen
commit 3589e74595a4332ebf77b5ed006f3c6686071ecd upstream. Asus_oled triggers the following bug on module unloading: usbcore: deregistering interface driver asus-oled BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff8111292b>] sysfs_delete_link+0x30/0x66 Call Trace: [<ffffffff81225373>] device_remove_class_symlinks+0x6b/0x70 [<ffffffff812256a8>] device_del+0x9f/0x1ab [<ffffffff812257c5>] device_unregister+0x11/0x1e [<ffffffffa000cb82>] asus_oled_disconnect+0x4f/0x9e [asus_oled] [<ffffffff81277430>] usb_unbind_interface+0x54/0x103 [<ffffffff812276c4>] __device_release_driver+0xa2/0xeb [<ffffffff81227794>] driver_detach+0x87/0xad [<ffffffff812269e9>] bus_remove_driver+0x91/0xc1 [<ffffffff81227fb4>] driver_unregister+0x66/0x6e [<ffffffff812771ed>] usb_deregister+0xbb/0xc4 [<ffffffffa000ce87>] asus_oled_exit+0x2f/0x31 [asus_oled] [<ffffffff81068365>] sys_delete_module+0x1b8/0x21b [<ffffffff810ae3de>] ? do_munmap+0x2ef/0x313 [<ffffffff813699bb>] system_call_fastpath+0x16/0x1b This is due to an incorrect destruction sequence in asus_oled_exit(). Fix the order, fixes the bug. Tested on an Asus G50V laptop only. Cc: Jakub Schmidtke <sjakub@gmail.com> Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13Staging: asus_oled: fix image processingPekka Paalanen
commit 635032cb397b396241372fa0ff36ae758e658b23 upstream. Programming an image was broken, because odev->buf_offs was not advanced for val == 0 in append_values(). This regression was introduced in: commit 1ff12a4aa354bed093a0240d5e6347b1e27601bc Author: Kevin A. Granade <kevin.granade@gmail.com> Date: Sat Sep 5 01:03:39 2009 -0500 Staging: asus_oled: Cleaned up checkpatch issues. Fix the image processing by special-casing val == 0. I have tested this change on an Asus G50V laptop only. Cc: Jakub Schmidtke <sjakub@gmail.com> Cc: Kevin A. Granade <kevin.granade@gmail.com> Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}Roland Dreier
commit 9fbc8909876a2160044e71d376848973b9bfdc3f upstream. According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Allow PERSISTENT RESERVE IN for non-reservation holderMarco Sanvido
commit 6816966a8418b980481b4dced7eddd1796b145e8 upstream. Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido <marco@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Use correct preempted registration sense codeMarco Sanvido
commit 9e08e34e3735ae057eb3834da3570995811b7eb9 upstream. The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido <marco@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13pcmcia: fix socket refcount decrementing on each resumeRussell King
commit 025e4ab3db07fcbf62c01e4f30d1012234beb980 upstream. This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13hwmon: (w83627ehf) Fix number of fans for NCT6776FGuenter Roeck
commit 585c0fd8216e0c9f98e2434092af7ec0f999522d upstream. NCT6776F can select fan input pins for fans 3 to 5 with a secondary set of chip register bits. Check that second set of bits in addition to the first set to detect if fans 3..5 are monitored. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resumeHubert Feurstein
commit 9f1065032ceb7e86c7c9f16bb86518857e88a172 upstream. An error was existing in the saving of CONTRAST_CTR register across suspend/resume. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/i915: handle 3rd pipeEugeni Dodonov
commit 07c1e8c1462fa7324de4c36ae9e55da2abd79cee upstream. We don't need to check 3rd pipe specifically, as it shares PLL with some other one. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41977 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/i915: Fix TV Out refresh rate.Rodrigo Vivi
commit 23bd15ec662344dc10e9918fdd0dbc58bc71526d upstream. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/i915: check ACTHD of all ringsDaniel Vetter
commit 097354eb14fa94d31a09c64d640643f58e4a5a9a upstream. Otherwise hangcheck spuriously fires when running blitter/bsd-only workloads. Contrary to a similar patch by Ben Widawsky this does not check INSTDONE of the other rings. Chris Wilson implied that in a failure to detect a hang, most likely because INSTDONE was fluctuating. Thus only check ACTHD, which as far as I know is rather reliable. Also, blitter and bsd rings can't launch complex tasks from a single instruction (like 3D_PRIM on the render with complex or even infinite shaders). This fixes spurious gpu hang detection when running tests/gem_hangcheck_forcewake on snb/ivb. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/i915: DisplayPort hot remove notification to audio driverWu Fengguang
commit 832afda6a7d7235ef0e09f4ec46736861540da6d upstream. On DP monitor hot remove, clear DP_AUDIO_OUTPUT_ENABLE accordingly, so that the audio driver will receive hot plug events and take action to refresh its device state and ELD contents. Note that the DP_AUDIO_OUTPUT_ENABLE bit may be enabled or disabled only when the link training is complete and set to "Normal". Tested OK for both hot plug/remove and DPMS on/off. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/i915: HDMI hot remove notification to audio driverWu Fengguang
commit 2deed761188d7480eb5f7efbfe7aa77f09322ed8 upstream. On HDMI monitor hot remove, clear SDVO_AUDIO_ENABLE accordingly, so that the audio driver will receive hot plug events and take action to refresh its device state and ELD contents. The cleared SDVO_AUDIO_ENABLE bit needs to be restored to prevent losing HDMI audio after DPMS on. CC: Wang Zhenyu <zhenyu.z.wang@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/radeon/kms: disable output polling when suspendedSeth Forshee
commit 86698c20f71d488b32c49ed4687fb3cf8a88a5ca upstream. Polling the outputs when the device is suspended can result in erroneous status updates. Disable output polling during suspend to prevent this from happening. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/nouveau/gem: fix fence_sync race / oopsBen Skeggs
commit 525895ba388c949aa906f26e3ec5cb1ab041f56b upstream. Due to a race it was possible for a fence to be destroyed while another thread was trying to synchronise with it. If this happened in the fallback non-semaphore path, it lead to the following oops due to fence->channel being NULL. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<fa9632ce>] nouveau_fence_update+0xe/0xe0 [nouveau] *pde = a649c067 SMP Modules linked in: fuse nouveau(O) ttm(O) drm_kms_helper(O) drm(O) mxm_wmi video wmi netconsole configfs lockd bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_codec_realtek snd_hda_intel snd_hda_cobinfmt_misc uinput ata_generic pata_acpi pata_aet2c_algo_bit i2c_core [last unloaded: wmi] Pid: 2255, comm: gnome-shell Tainted: G O 3.2.0-0.rc5.git0.1.fc17.i686 #1 System manufacturer System Product Name/M2A-VM EIP: 0060:[<fa9632ce>] EFLAGS: 00010296 CPU: 1 EIP is at nouveau_fence_update+0xe/0xe0 [nouveau] EAX: 00000000 EBX: ddfc6dd0 ECX: dd111580 EDX: 00000000 ESI: 00003e80 EDI: dd111580 EBP: dd121d00 ESP: dd121ce8 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process gnome-shell (pid: 2255, ti=dd120000 task=dd111580 task.ti=dd120000) Stack: 7dc86c76 00000000 00003e80 ddfc6dd0 00003e80 dd111580 dd121d0c fa96371f 00000000 dd121d3c fa963773 dd111580 01000246 000ec53d 00000000 ddfc6dd0 00001f40 00000000 ddfc6dd0 00000010 dc7df840 dd121d6c fa9639a0 00000000 Call Trace: [<fa96371f>] __nouveau_fence_signalled+0x1f/0x30 [nouveau] [<fa963773>] __nouveau_fence_wait+0x43/0xd0 [nouveau] [<fa9639a0>] nouveau_fence_sync+0x1a0/0x1c0 [nouveau] [<fa964046>] validate_list+0x176/0x300 [nouveau] [<f7d9c9c0>] ? ttm_bo_mem_put+0x30/0x30 [ttm] [<fa964b8a>] nouveau_gem_ioctl_pushbuf+0x48a/0xfd0 [nouveau] [<c0406481>] ? die+0x31/0x80 [<f7c93d98>] drm_ioctl+0x388/0x490 [drm] [<c0406481>] ? die+0x31/0x80 [<fa964700>] ? nouveau_gem_ioctl_new+0x150/0x150 [nouveau] [<c0635c7b>] ? file_has_perm+0xcb/0xe0 [<f7c93a10>] ? drm_copy_field+0x80/0x80 [drm] [<c0564f56>] do_vfs_ioctl+0x86/0x5b0 [<c0406481>] ? die+0x31/0x80 [<c0635f22>] ? selinux_file_ioctl+0x62/0x130 [<c0554f30>] ? fget_light+0x30/0x340 [<c05654ef>] sys_ioctl+0x6f/0x80 [<c099e3a4>] syscall_call+0x7/0xb [<c0406481>] ? die+0x31/0x80 [<c0406481>] ? die+0x31/0x80 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drm/radeon: Set DESKTOP_HEIGHT register to the framebuffer (not mode) height.Michel Dänzer
commit 1b61925061660009f5b8047f93c5297e04541273 upstream. The value of this register is transferred to the V_COUNTER register at the beginning of vertical blank. V_COUNTER is the reference for VLINE waits and goes from VIEWPORT_Y_START to VIEWPORT_Y_START+VIEWPORT_HEIGHT during scanout, so if VIEWPORT_Y_START is not 0, V_COUNTER actually went backwards at the beginning of vertical blank, and VLINE waits excluding the whole scanout area could never finish (possibly only if VIEWPORT_Y_START is larger than the length of vertical blank in scanlines). Setting DESKTOP_HEIGHT to the framebuffer height should prevent this for any kind of VLINE wait. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=45329 . Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13at_hdmac: bugfix for enabling channel irqNikolaus Voss
commit bda3a47c886664e86ee14eb79e9072b9e341f575 upstream. commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13IB/mlx4: pass SMP vendor-specific attribute MADs to firmwareJack Morgenstein
commit a6f7feae6d19e84253918d88b04153af09d3a243 upstream. In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ira Weiny <weiny2@llnl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13firewire: ohci: disable MSI on Ricoh controllersStefan Richter
commit 320cfa6ce0b3dc794fedfa4bae54c0f65077234d upstream. The PCIe device FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) is unable to access attached FireWire devices when MSI is enabled but works if MSI is disabled. http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html Hence add the "disable MSI" quirks flag for this device, or in fact for safety and simplicity for all current (R5U230, R5U231, R5U240) and future Ricoh PCIe 1394 controllers. Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13firewire: ohci: add reset packet quirk for SB AudigyClemens Ladisch
commit d1bb399ad03c11e792f6dea198d3b1e23061f094 upstream. The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layerSamuel Thibault
commit cbcb8346054073d000ecac324763372d6abd44ac upstream. KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland with a 64bit kernel if the font width is not 8. This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes con_font_get return EIO in such case. This flag should *not* be set for KDFONTOP, since it's actually the whole point of this flag (see comment in con_font_set for instance). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Arthur Taylor <art@ified.ca> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-06PCI: Rework ASPM disable codeMatthew Garrett
commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream. Right now we forcibly clear ASPM state on all devices if the BIOS indicates that the feature isn't supported. Based on the Microsoft presentation "PCI Express In Depth for Windows Vista and Beyond", I'm starting to think that this may be an error. The implication is that unless the platform grants full control via _OSC, Windows will not touch any PCIe features - including ASPM. In that case clearing ASPM state would be an error unless the platform has granted us that control. This patch reworks the ASPM disabling code such that the actual clearing of state is triggered by a successful handoff of PCIe control to the OS. The general ASPM code undergoes some changes in order to ensure that the ability to clear the bits isn't overridden by ASPM having already been disabled. Further, this theoretically now allows for situations where only a subset of PCIe roots hand over control, leaving the others in the BIOS state. It's difficult to know for sure that this is the right thing to do - there's zero public documentation on the interaction between all of these components. But enough vendors enable ASPM on platforms and then set this bit that it seems likely that they're expecting the OS to leave them alone. Measured to save around 5W on an idle Thinkpad X220. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: allow more baud rates above 1MbaudJohan Hovold
commit d1620ca9e7bb0030068c3b45b653defde8839dac upstream. Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: initialise baud rate at openJohan Hovold
commit cdc32fd6f7b2b2580d7f1b74563f888e4dd9eb8a upstream. The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: clean up, refactor and document speed handlingJohan Hovold
commit e5990874e511d5bbca23b3396419480cb2ca0ee7 upstream. Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: fix up set_termios variablesJohan Hovold
commit 34b76fcaee574017862ea3fa0efdcd77a9d0e57d upstream. [Based on a patch from Johan, mangled by gregkh to keep things in line] Fix up the variable usage in the set_termios call. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: do not map baud rates to B0Johan Hovold
commit be125d9c8d59560e7cc2d6e2b65c8fd233498ab7 upstream. We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: fix CP2104 baudrate usagePreston Fick
commit 7f482fc88ac47662228d6b1f05759797c8936a30 upstream. This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by: Preston Fick <preston.fick@silabs.com> [duplicate patch also sent by Johan - gregkh] Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cp210x: call generic open last in openJohan Hovold
commit 55b2afbb92ad92e9f6b0aa4354eb1c94589280c3 upstream. Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19Renato Caldas
commit 791b7d7cf69de11275e4dccec2f538eec02cbff6 upstream. This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by: Renato Caldas <rmsc@fe.up.pt> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03bonding: fix enslaving in alb mode when link downJiri Bohac
[ Upstream commit b924551bed09f61b64f21bffe241afc5526b091a ] bond_alb_init_slave() is called from bond_enslave() and sets the slave's MAC address. This is done differently for TLB and ALB modes. bond->alb_info.rlb_enabled is used to discriminate between the two modes but this flag may be uninitialized if the slave is being enslaved prior to calling bond_open() -> bond_alb_initialize() on the master. It turns out all the callers of alb_set_slave_mac_addr() pass bond->alb_info.rlb_enabled as the hw parameter. This patch cleans up the unnecessary parameter of alb_set_slave_mac_addr() and makes the function decide based on the bonding mode instead, which fixes the above problem. Reported-by: Narendra K <Narendra_K@Dell.com> Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPEBjørn Mork
commit 15699e6fafc3a90e5fdc2ef30555a04dee62286f upstream. The probe does not strictly require the USB_CDC_DMM_TYPE descriptor, which is a good thing as it makes the driver usable on non-conforming interfaces. A user could e.g. bind to it to a CDC ECM interface by using the new_id and bind sysfs files. But this would fail with a 0 buffer length due to the missing descriptor. Fix by defining a reasonable fallback size: The minimum device receive buffer size required by the CDC WMC standard, revision 1.1 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cdc-wdm: better allocate a buffer that is at least as big as we tell ↵Bjørn Mork
the USB core commit 655e247daf52b202a6c2d0f8a06dd2051e756ce4 upstream. As it turns out, there was a mismatch between the allocated inbuf size (desc->bMaxPacketSize0, typically something like 64) and the length we specified in the URB (desc->wMaxCommand, typically something like 2048) Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removalBjørn Mork
commit 62aaf24dc125d7c55c93e313d15611f152b030c7 upstream. wdm_disconnect() waits for the mutex held by wdm_read() before calling wake_up_all(). This causes a deadlock, preventing device removal to complete. Do the wake_up_all() before we start waiting for the locks. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03hwmon: (sht15) fix bad error codeVivien Didelot
commit 6edf3c30af01854c416f8654d3d5d2652470afd4 upstream. When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776FGuenter Roeck
commit ad77c3e1808f07fa70f707b1c92a683b7c7d3f85 upstream. NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03hwmon: (f71805f) Fix clamping of temperature limitsJean Delvare
commit 86b2bbfdbd1fcc4a3aa62ccd3f245c40c5ad5b85 upstream. Properly clamp temperature limits set by the user. Without this fix, attempts to write temperature limits above the maximum supported by the chip (255 degrees Celsius) would arbitrarily and unexpectedly result in the limit being set to 0 degree Celsius. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-21 10:01:11 +0000