aboutsummaryrefslogtreecommitdiff
path: root/drivers/video/Makefile
AgeCommit message (Collapse)Author
2012-09-28ARM: clps711x: Remove board support for CEIVAAlexander Shiyan
The current kernel does not fit in the CEIVA ROM. Also, some functional has already been removed due migrate from 2.6 to 3.0, and it seems that no one uses this platform. So, remove support for this board and modules specific only to this board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
2012-04-29video: auo_k190x: add driver for AUO-K1901 variantHeiko Stübner
This controller not only supports higher resolutions than the K1900 but concurrent updates as well. This results in a generally higher display speed. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-29video: auo_k190x: add driver for AUO-K1900 variantHeiko Stübner
This controller only supports smaller resolutions and only serial updates, i.e. it has to wait for an update to finish before starting another one. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-29video: auo_k190x: add code shared by controller driversHeiko Stübner
The AUO-K190X controllers share a very similar set of commands and can therefore also share most of the driver code. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-15Resurrect Intel740 driver: i740fbOndrej Zary
This is a resurrection of an old (like 2.4.19) out-of-tree driver for Intel740 graphics cards and adaptation for recent kernels. The old driver by Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/ This is a new driver based on skeletonfb, using most of the low level HW code from the old driver. The DDC code is completely new. The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II G460. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-13video: support MIPI-DSI controller driverDonghwa Lee
Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at machine code and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-11-11fbdev: remove display subsystemFlorian Tobias Schandinat
This four year old subsystem does not have a single in-tree user not even in staging and as far as I know also none out-of-tree. I think that justifies removing it which cleans the config up. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2011-09-05Add support for SMSC UFX6000/7000 USB display adaptersSteve Glendinning
This patch adds framebuffer suport for SMSC's UFX6000 (USB 2.0) and UFX7000 (USB 3.0) display adapters. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-07-13video: Add Aeroflex Gaisler GRVGA framebuffer device driverKristoffer Glembo
This patch adds support for the GRVGA framebuffer IP core from Aeroflex Gaisler. The device is used in LEON SPARCV8 based System on Chips. Documentation can be found here: www.gaisler.com/products/grlib/grip.pdf. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23sh_mobile_meram: MERAM framework for LCDCDamian
Based on the patch by Takanari Hayama <taki@igel.co.jp> Adds support framework necessary to use Media RAM (MERAM) caching functionality with the LCDC. The MERAM is accessed through up to 4 Interconnect Buffers (ICBs). ICB numbers and MERAM address ranges to use are specified in by filling in the .meram_cfg member of the LCDC platform data Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-17unicore32 machine related: add frame buffer driver for pkunity-v3 socGuanXuetao
change from original version -- by advice of Paul Mundt 1. remove videomemorysize definitions 2. remove unifb_enable and unifb_setup 3. use dev_warn instead of printk in fb driver 4. remove judgement for FB_ACCEL_PUV3_UNIGFX 5. adjust clk_get and clk_set_rate calls 6. add resources definitions 7. remove unifb_option 8. adjust register for platform_device 9. adjust unifb_ops position and unifb_regs assignment position Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-07video: Add i.MX23/28 framebuffer driverSascha Hauer
changes since v2: - use v3 and v4 for specifying the ip version instead of i.MX23/28. This is a better namespace when future versions are added. - rename mach/fb.h to mach/mxsfb.h changes since v1: - Add a LCDC_ prefix to the register names. - use set/clear registers where appropriate - protect call to mxsfb_disable_controller() in mxsfb_remove() with a (host->enabled) as suggested by Lothar Wassmann Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-fbdev@vger.kernel.org
2011-01-06Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits) ARM: DMA: add support for DMA debugging ARM: PL011: add DMA burst threshold support for ST variants ARM: PL011: Add support for transmit DMA ARM: PL011: Ensure IRQs are disabled in UART interrupt handler ARM: PL011: Separate hardware FIFO size from TTY FIFO size ARM: PL011: Allow better handling of vendor data ARM: PL011: Ensure error flags are clear at startup ARM: PL011: include revision number in boot-time port printk ARM: vexpress: add sched_clock() for Versatile Express ARM i.MX53: Make MX53 EVK bootable ARM i.MX53: Some bug fix about MX53 MSL code ARM: 6607/1: sa1100: Update platform device registration ARM: 6606/1: sa1100: Fix platform device registration ARM i.MX51: rename IPU irqs ARM i.MX51: Add ipu clock support ARM: imx/mx27_3ds: Add PMIC support ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn() mx51: fix usb clock support MX51: Add support for usb host 2 arch/arm/plat-mxc/ehci.c: fix errors/typos ...
2011-01-06Merge branch 'fbdev/udlfb'Paul Mundt
2010-12-16video: add driver for PXA3xx 2D graphics acceleratorDaniel Mack
This adds a driver for the the 2D graphics accelerator found on PXA3xx processors. Only resource mapping, interrupt handling and a simple ioctl handler is done by the kernel part, the rest of the logic is implemented in DirectFB userspace. Graphic applications greatly benefit for line drawing, blend, and rectangle and triangle filling operations. Benchmarks done on a PXA303 using the df_dok benchmarking tool follow, where the value in square brackets show the CPU usage during that test. Without accelerator (benchmarking 256x252 on 480x262 RGB16 (16bit)): Anti-aliased Text 3.016 secs ( 65.649 KChars/sec) [ 99.6%] Fill Rectangle 3.021 secs ( 175.107 MPixel/sec) [ 98.0%] Fill Rectangle (blend) 3.582 secs ( 3.602 MPixel/sec) [ 99.7%] Fill Rectangles [10] 3.177 secs ( 182.753 MPixel/sec) [ 98.1%] Fill Rectangles [10] (blend) 18.020 secs ( 3.580 MPixel/sec) [ 98.7%] Fill Spans 3.019 secs ( 145.306 MPixel/sec) [ 98.0%] Fill Spans (blend) 3.616 secs ( 3.568 MPixel/sec) [ 99.4%] Blit 3.074 secs ( 39.874 MPixel/sec) [ 98.0%] Blit 180 3.020 secs ( 32.042 MPixel/sec) [ 98.0%] Blit with format conversion 3.005 secs ( 19.321 MPixel/sec) [ 99.6%] Blit from 32bit (blend) 4.792 secs ( 2.692 MPixel/sec) [ 98.7%] With accelerator: Anti-aliased Text 3.056 secs (* 36.518 KChars/sec) [ 21.3%] Fill Rectangle 3.015 secs (* 115.543 MPixel/sec) [ 8.9%] Fill Rectangle (blend) 3.180 secs (* 20.286 MPixel/sec) [ 1.8%] Fill Rectangles [10] 3.251 secs (* 119.062 MPixel/sec) [ 1.2%] Fill Rectangles [10] (blend) 6.293 secs (* 20.502 MPixel/sec) [ 0.3%] Fill Spans 3.051 secs (* 97.264 MPixel/sec) [ 35.7%] Fill Spans (blend) 3.377 secs (* 15.282 MPixel/sec) [ 17.8%] Blit 3.046 secs (* 27.533 MPixel/sec) [ 2.6%] Blit 180 3.098 secs (* 27.070 MPixel/sec) [ 2.2%] Blit with format conversion 3.131 secs (* 39.148 MPixel/sec) [ 2.8%] Blit from 32bit (blend) 3.346 secs (* 11.568 MPixel/sec) [ 0.8%] Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Denis Oliver Kropp <dok@directfb.org> Cc: Sven Neumann <s.neumann@raumfeld.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-26fbdev: bfin_adv7393fb: new Blackfin ADV7393 driverMichael Hennerich
Driver for ADV7393 add-on card for multiple Blackfin boards. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-26fbdev: bf537-lq035: new Blackfin Sharp LQ035 framebuffer driverMichael Hennerich
For LCDs hooked up to BF537-STAMP boards. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16fbdev: move udlfb out of staging.Paul Mundt
udlfb has undergone a fair bit of cleanup recently and is effectively at the point where it can be liberated from staging purgatory and promoted to a real driver. The outstanding cleanups are all minor, with some of them dependent on drivers/video headers, so these will be done incrementally from udlfb's new home. Requested-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-09ARM: Add support for the display controllers in VT8500 and WM8505Alexey Charkov
This adds drivers for the LCD controller found in VIA VT8500 SoC, GOVR display controller found in WonderMedia WM8505 SoC and for the Graphics Engine present in both of them that provides hardware accelerated raster operations (used for copyarea and fillrect). Signed-off-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-06Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King
devel-stable Conflicts: drivers/net/irda/sh_irda.c
2010-08-05FBDEV: JZ4740: Add framebuffer driverLars-Peter Clausen
Add support for the LCD controller on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fbdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-04fbdev: sh-mobile: HDMI support for SH-Mobile SoCsGuennadi Liakhovetski
Some SH-Mobile SoCs have an HDMI controller and a PHY, attached to one of their LCDC interfaces. This patch adds a preliminary static support for such controllers, this means, that only the 720p mode is handled ATM. Support for more modes and a dynamic switching between them will be added by a follow up patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-24sh-mobile: add support for displays, connected over the MIPI busGuennadi Liakhovetski
Some SH-mobile SoCs have a MIPI DSI controller, that can be used to connect MIPI displays to LCDC. This patch adds a platform driver for SH-mobile MIPI DSI unit. It uses existing hooks in the sh_mobile_lcdcfb.c driver for display activation and deactivation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add very basic XVR-1000 framebuffer driver. qlogicpti: Remove slash in QlogicPTI irq name
2010-03-13sparc64: Add very basic XVR-1000 framebuffer driver.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Frans van Berckel <fberckel@xs4all.nl>
2010-03-12NUC900 LCD Controller DriverWang Qiang
An LCD controller driver for nuc900s. The Linux LOGO is just fine and the FB-Test application was ok, too. Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Cc: Wang Zongshun <mcuos.com@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16fbdev: bfin-lq035q1-fb: new Blackfin Landscape LCD EZ-Extender driverMichael Hennerich
Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT) http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extender Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-09OMAP: Add VRAM managerTomi Valkeinen
Add a Video RAM manager for OMAP 2 and 3 platforms. VRAM manager is used to allocate large continuous blocks of SDRAM or SRAM. The features VRAM manager has that are missing from dma_alloc_* functions are: - Support for OMAP2's SRAM - Allocate without ioremapping - Allocate at defined physical addresses - Allows larger VRAM area and larger allocations The upcoming DSS2 uses VRAM manager. VRAM area size can be defined in kernel config, board file or with kernel boot parameters. Board file definition overrides kernel config, and boot parameter overrides kernel config and board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-09-23ep93xx video driverRyan Mallon
EP93xx video driver plus documentation. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23davinci: fb: Frame Buffer driver for TI DA8xx/OMAP-L1xxSudhakar Rajashekhara
Add LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx architecture. LCDC specifications can be found at http://www.ti.com/litv/pdf/sprufm0a. LCDC on DA8xx consists of two independent controllers, the Raster Controller and the LCD Interface Display Driver (LIDD) controller. LIDD further supports character and graphic displays. This patch adds support for the graphic display (Sharp LQ035Q3DG01) found on the DA830 based EVM. The EVM details can be found at: http://support.spectrumdigital.com/boards/dskda830/revc/. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Steve Chen <schen@mvista.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> DESC davinci-fb-frame-buffer-driver-for-ti-da8xx-omap-l1xx-fix EDESC From: Andrew Morton <akpm@linux-foundation.org> fix kconfig indenting Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Steve Chen <schen@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23fbdev: framebuffer support for HTC DreamPavel Machek
Add a framebuffer driver for Qualcomm MSM/QSD SoCs, tested on HTC Dream smartphone (aka T-Mobile G1, aka ADP1). Brian said: I did the original quick and dirty version for bringup. Rebecca took over and (re)wrote the bulk of the driver, getting things stable for production ship of Dream and Sapphire, and Dima is currently adding support for later Qualcomm chipsets (QSD8x50, etc). Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Rebecca Schultz Zavin <rebecca@android.com> Cc: Dima Zavin <dima@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-13fb: add support of LCD display controller on pxa168/910 (base layer)Lennert Buytenhek
This driver is originally written by Lennert, modified by Green to be feature complete, and ported by Jun Nie and Kevin Liu for pxa168/910 processors. The patch adds support for the on-chip LCD display controller, it currently supports the base (graphics) layer only. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Green Wan <gwan@marvell.com> Cc: Peter Liao <pliao@marvell.com> Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-05-06fbdev: remove makefile reference to removed driverKrzysztof Helt
The cyblafb driver is removed so remove its last trace in the makefile. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fb: add s3c-fb driver for newer Samsung SoC framebuffer devicesBen Dooks
Add support for the newer Samsung devices, such as found in the S3C2443, S3C6400 or S3C6410 series SoC. It currently does not support all the alpha- or chroma-key options but it will support more exporting more than one framebuffer ready for adding overlay and blending functions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01n411: add missing Makefile entryHerton Ronaldo Krzesinski
There is no entry for n411.c to be built, include one in Makefile. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-16Merge branch 'imx-fb-fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into devel Conflicts: drivers/video/mx3fb.c
2009-02-26i.MX31: framebuffer driverGuennadi Liakhovetski
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-26Revert "i.MX31: framebuffer driver"Dan Williams
This reverts commit 86528da229a448577a8401a17c295883640d336c. This version of the patch was tab-to-space corrupted before application. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-02-10[ARM] 5353/1: fbdev: add E-Ink Broadsheet controller support v3Jaya Kumar
This patch adds support for the E-Ink Broadsheet display controller. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-26Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: i.MX31: framebuffer driver i.MX31: Image Processing Unit DMA and IRQ drivers dmaengine: add async_tx_clear_ack() macro dmaengine: dma_issue_pending_all == nop when CONFIG_DMA_ENGINE=n dmaengine: kill some dubious WARN_ONCEs fsldma: print correct IRQ on mpc83xx fsldma: check for NO_IRQ in fsl_dma_chan_remove() dmatest: Use custom map/unmap for destination buffer fsldma: use a valid 'device' for dma_pool_create dmaengine: fix dependency chaining
2009-01-21i.MX31: framebuffer driverGuennadi Liakhovetski
This is a framebuffer driver for i.MX31 SoCs. It only supports synchronous displays, vertical panning supported, no overlay support. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12fbdev: c2p - Rename c2p to c2p_planarGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12fbdev: c2p/atafb - Add support for Atari interleaved bitplanesGeert Uytterhoeven
The c2p() for normal bitplanes is not suitable for interleaved bitplanes with 2 bytes of interleave, causing a garbled penguin logo. Add c2p_iplan2(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-11-06fbdev: add new framebuffer driver for Fujitsu MB862xx GDCsAnatolij Gustschin
Add a framebuffer driver for the Fujitsu Carmine/Coral-P(A)/Lime graphics controllers. Lime GDC support is known to work on PPC440EPx based lwmon5 and MPC8544E based socrates embedded boards, both equipped with Lime GDC. Carmine/Coral-P PCI GDC support is known to work on PPC440EPx based Sequoia board and also on x86 platform. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Matteo Fortini <m.fortini@selcomgroup.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16fbdev: add new TMIO framebuffer driverDmitry Baryshkov
Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16efifb/imacfb consolidation + hardware supportPeter Jones
Remove imacfb entirely, merging its DMI table into the (otherwise very similar) efifb driver. This also adds hardware support for many of the newer Intel Apple hardware. This has been fairly well tested; we've been shipping it in Fedora for some time. Signed-off-by: Peter Jones <pjones@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16viafb: Makefile, KconfigJoseph Chan
Modified drivers/video/Makefile and drivers/video/Kconfig. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-26[ARM] 5200/1: am200epd: use fb notifiers and gpio apiJaya Kumar
The original am200epd driver was designed with bad assumptions. It manipulated GPSR/GPLR registers directly. It relied on direct access to the pxa LCDC registers which have since conflicted with commit ce4fb7b892a6d6c6a0f87366b26fd834d2923dd7 . This patch moves it into mach-pxa and overhauls it to use a fb obtained through fb notifiers. It now uses the generic GPIO api. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-29video: Kill off leaked CONFIG_FB_SH7343VOU reference.Paul Mundt
This came in with the SH-Mobile LCDC changes in commit cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-15 13:43:08 +0000