aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-06-13USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointerYing Xue
commit a816e3113b63753c330ca4751ea1d208e93e3015 upstream. Pointers should not be compared to plain integers. Quiets the sparse warning: warning: Using plain integer as NULL pointer Signed-off-by: Ying Xue <ying.xue@windriver.com> Cc: Lotfi Manseur <lotfi.manseur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: serial: ftdi_sio: Handle the old_termios == 0 case e.g. uart_resume_port()Andrew Worsley
commit c515598e0f5769916c31c00392cc2bfe6af74e55 upstream. Handle null old_termios in ftdi_set_termios() calls from uart_resume_port(). Signed-off-by: Andrew Worsley <amworsley@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Lotfi Manseur <lotfi.manseur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: mos7720: fix hardware flow controlJohan Hovold
commit a26f009a070e840fadacb91013b2391ba7ab6cc2 upstream. The register access to enable hardware flow control depends on the device port number and not the port minor number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: mos7720: fix message timeoutsJohan Hovold
commit 849513a7809175420d353625b6f651d961e99d49 upstream. The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: mos7720: fix DMA to stackJohan Hovold
commit 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 upstream. The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: revert periodic scheduling bugfixAlan Stern
commit fdc03438f53a00294ed9939eb3a1f6db6f3d8963 upstream. This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d (USB: EHCI: fix bug in scheduling periodic split transfers). The commit was valid -- it fixed a real bug -- but the periodic scheduler in ehci-hcd is in such bad shape (especially the part that handles split transactions) that fixing one bug is very likely to cause another to surface. That's what happened in this case; the result was choppy and noisy playback on certain 24-bit audio devices. The only real fix will be to rewrite this entire section of code. My next project... This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110. Thanks to Tim Richardson for extra testing and feedback, and to Joseph Salisbury and Tyson Tan for tracking down the original source of the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Joseph Salisbury <joseph.salisbury@canonical.com> CC: Tim Richardson <tim@tim-richardson.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: serial: fix Treo/Kyocera interrrupt-in urb contextJohan Hovold
commit 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 upstream. The first and second interrupt-in urbs are swapped for some Treo/Kyocera devices, but the urb context was never updated with the new port. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: whiteheat: fix broken port configurationJohan Hovold
commit 9eecf22d2b375b9064a20421c6c307b760b03d46 upstream. When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: Serial: cypress_M8: Enable FRWD Dongle hidcom deviceRobert Butora
commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream. The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: ark3116: fix control-message timeoutJohan Hovold
commit 634371911730a462626071065b64cd6e1fe213e0 upstream. The control-message timeout is specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: keyspan: fix bogus array indexJohan Hovold
commit a07088098a650267b2eda689538133a324b9523f upstream. The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: iuu_phoenix: fix bulk-message timeoutJohan Hovold
commit 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 upstream. The bulk-message timeout is specified in milliseconds and should not depend on HZ. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13USB: option: blacklist network interface on Huawei E1820Bjørn Mork
commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream. The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: io_ti: Fix NULL dereference in chase_port()Wolfgang Frisch
commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream. The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: UHCI: fix for suspend of virtual HP controllerAlan Stern
commit 997ff893603c6455da4c5e26ba1d0f81adfecdfc upstream. HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: ZhenHua <zhen-hual@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: reset resume quirk needed by a hubOliver Neukum
commit bac6b03275184c912ad0818c9a0a736847804dca upstream. Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph
commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: cxacru: potential underflow in cxacru_cm_get_array()Dan Carpenter
commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream. The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]
commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream. Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams
commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen
commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usb-storage: CY7C68300A chips do not support Cypress ATACBTormod Volden
commit 671b4b2ba9266cbcfe7210a704e9ea487dcaa988 upstream. Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl epHans de Goede
commit 1361bf4b9f9ef45e628a5b89e0fd9bedfdcb7104 upstream. When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset
commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold
commit 58f8b6c4fa5a13cb2ddb400e26e9e65766d71e38 upstream. This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usb/misc/appledisplay: Add 24" LED Cinema displayBen Jencks
commit e7d3b6e22c871ba36d052ca99bc8ceca4d546a60 upstream. Add the Apple 24" LED Cinema display to the supported devices. Signed-off-by: Ben Jencks <ben@bjencks.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: option: add a D-Link DWM-156 variantBjørn Mork
commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: serial: option: Added support Olivetti Olicard 145Filippo Turato
commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: xhci: Fix TRB transfer length macro used for Event TRB.Vivek Gautam
commit 1c11a172cb30492f5f6a82c6e118fdcd9946c34f upstream. Use proper macro while extracting TRB transfer length from Transfer event TRBs. Adding a macro EVENT_TRB_LEN (bits 0:23) for the same, and use it instead of TRB_LEN (bits 0:16) in case of event TRBs. This patch should be backported to kernels as old as 2.6.31, that contain the commit b10de142119a676552df3f0d2e3a9d647036c26a "USB: xhci: Bulk transfer support". This patch will have issues applying to older kernels. Signed-off-by: Vivek gautam <gautam.vivek@samsung.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BDKonstantin Holoborodko
commit 482b0b5d82bd916cc0c55a2abf65bdc69023b843 upstream. It enhances the driver for FTDI-based USB serial adapters to recognize Mitsubishi Electric Corp. USB/RS422 Converters as FT232BM chips and support them. https://search.meau.com/?q=FX-USB-AW Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com> Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: io_ti: fix get_icount for two port adaptersJohan Hovold
commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: garmin_gps: fix memory leak on disconnectJohan Hovold
commit 618aa1068df29c37a58045fe940f9106664153fd upstream. Remove bogus disconnect test introduced by 95bef012e ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: serial: fix interface refcountingJohan Hovold
commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28USB: xhci - fix bit definitions for IMAN registerDmitry Torokhov
commit f8264340e694604863255cc0276491d17c402390 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't re-enable IE constantly". Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 playerDmitry Artamonow
commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream. Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Revert "USB: EHCI: don't check DMA values in QH overlays"Greg Kroah-Hartman
This reverts commit 0319f9909ce68a7516dfc8d53400e07168d281a8, which is commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. It shouldn't have gone into this stable release. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: EHCI: don't check DMA values in QH overlaysAlan Stern
commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: storage: fix Huawei mode switching regressionBjørn Mork
commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream. This reverts commit 200e0d99 ("USB: storage: optimize to match the Huawei USB storage devices and support new switch command" and the followup bugfix commit cd060956 ("USB: storage: properly handle the endian issues of idProduct"). The commit effectively added a large number of Huawei devices to the deprecated usb-storage mode switching logic. Many of these devices have been in use and supported by the userspace usb_modeswitch utility for years. Forcing the switching inside the kernel causes a number of regressions as a result of ignoring existing onfigurations, and also completely takes away the ability to configure mode switching per device/system/user. Known regressions caused by this: - Some of the devices support multiple modes, using different switching commands. There are existing configurations taking advantage of this. - There is a real use case for disabling mode switching and instead mounting the exposed storage device. This becomes impossible with switching logic inside the usb-storage driver. - At least on device fail as a result of the usb-storage switching command, becoming completely unswitchable. This is possibly a firmware bug, but still a regression because the device work as expected using usb_modeswitch defaults. In-kernel mode switching was deprecated years ago with the development of the more user friendly userspace alternatives. The existing list of devices in usb-storage was only kept to prevent breaking already working systems. The long term plan is to remove the list, not to add to it. Ref: http://permalink.gmane.org/gmane.linux.usb.general/28543 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: <fangxiaozhi@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: serial: Add Rigblaster Advantage to device tableSteve Conklin
commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: added support for Cinterion's products AH6 and PLS8Christian Schmiedl
commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: cp210x new Vendor/Device IDsMatwey V. Kornilov
commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: cdc-wdm: fix buffer overflowOliver Neukum
commit c0f5ecee4e741667b2493c742b60b6218d40b3aa upstream. The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: option: add Huawei E5331Bjørn Mork
commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20qcaux: add Franklin U600Dan Williams
commit 2d90e63603ac235aecd7d20e234616e0682c8b1f upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: usb-storage: unusual_devs update for Super TOP SATA bridgeJosh Boyer
commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream. The current entry in unusual_cypress.h for the Super TOP SATA bridge devices seems to be causing corruption on newer revisions of this device. This has been reported in Arch Linux and Fedora. The original patch was tested on devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591 The Arch Forum post on this is here: https://bbs.archlinux.org/viewtopic.php?id=152011 Reported-by: Carsten S. <carsteniq@yahoo.com> Tested-by: Carsten S. <carsteniq@yahoo.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: storage: properly handle the endian issues of idProductfangxiaozhi
commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream. 1. The idProduct is little endian, so make sure its value to be compatible with the current CPU. Make no break on big endian processors. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: ehci-omap: Fix autoloading of moduleRoger Quadros
commit 04753523266629b1cd0518091da1658755787198 upstream. The module alias should be "ehci-omap" and not "omap-ehci" to match the platform device name. The omap-ehci module should now autoload correctly. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Huawei "ACM" devices using protocol = vendorBjørn Mork
commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream. The USB device descriptor of one identity presented by a few Huawei morphing devices have serial functions with class codes 02/02/ff, indicating CDC ACM with a vendor specific protocol. This combination is often used for MSFT RNDIS functions, and the CDC ACM class driver will therefore ignore such functions. The CDC ACM class driver cannot support functions with only 2 endpoints. The underlying serial functions of these modems are also believed to be the same as for alternate device identities already supported by the option driver. Letting the same driver handle these functions independently of the current identity ensures consistent handling and user experience. There is no need to blacklist these devices in the rndis_host driver. Huawei serial functions will either have only 2 endpoints or a CDC ACM functional descriptor with bmCapabilities != 0, making them correctly ignored as "non RNDIS" by that driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add Yota / Megafon M100-1 4g modemBjørn Mork
commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream. Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28USB: option: add and update Alcatel modemsBjørn Mork
commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-11 08:17:28 +0000