aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/renesas_usbhs
AgeCommit message (Collapse)Author
2012-05-04usb: renesas_usbhs: gadget: add support for set_selfpoweredShimoda, Yoshihiro
The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS. So, this patch adds set_selfpowered(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-01Merge tag 'gadget-for-v3.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: Gadget: changes for 3.4 This merge is rather big. Here's what it contains: For am5536udc we have just simple coding style fixes. Nothing that has any potential to cause any issues going forward. With mv_udc, there's only one single change removing an unneeded NULL check. at91_udc also only saw a single change this merge window, and that's only removing a duplicated header. The Renesas controller has a few more involved changes. Support for SUDMAC was added, there's now a special handling of IRQ resources for when the IRQ line is shared between Renesas controller and SUDMAC, we also had a bug fix where Renesas controller would sleep in atomic context while doing DMA transfers from a tasklet. There were also a set of minor cleanups. The FSL UDC also had a scheduling in atomic context bug fix, but that's all. Thanks to Sebastian, the dummy_hcd now works better than ever with support for scatterlists and streams. Sebastian also added SuperSpeed descriptors to the serial gadgets. The highlight on this merge is the addition of a generic API for mapping and unmapping usb_requests. This will avoid code duplication on all UDC controllers and also kills all the defines for DMA_ADDR_INVALID which UDC controllers sprinkled around. A few of the UDC controllers were already converted to use this new API. Conflicts: drivers/usb/dwc3/gadget.c
2012-02-28usb: renesas: gadget: use generic map/unmap routinesFelipe Balbi
those routines have everything we need to map/unmap USB requests and it's better to use them. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-24usb: renesas_usbhs: bugfix: add .release function to gpriv->gadget.devKuninori Morimoto
This patch fixup below warning on device_unregister() renesas_usbhs renesas_usbhs.1: host probed renesas_usbhs renesas_usbhs.1: gadget probed renesas_usbhs renesas_usbhs.1: irq request err ------------[ cut here ]------------ WARNING: at ${LINUX}/drivers/base/core.c:1) Device 'gadget' does not have a release() function, it is broken and must be fi. Modules linked in: [<c000e25c>] (unwind_backtrace+0x0/0xe4) from [<c0016960>] (warn_slowpath_commo) [<c0016960>] (warn_slowpath_common+0x4c/0x64) from [<c00169f8>] (warn_slowpath_) [<c00169f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0185b80>] (device_release+0x) [<c0185b80>] (device_release+0x70/0x84) from [<c013e300>] (kobject_cleanup+0x58) [<c013e300>] (kobject_cleanup+0x58/0x6c) from [<c01cba14>] (usbhs_mod_gadget_re) [<c01cba14>] (usbhs_mod_gadget_remove+0x3c/0x6c) from [<c01c8384>] (usbhs_mod_p) [<c01c8384>] (usbhs_mod_probe+0x68/0x80) from [<c01c7f84>] (usbhs_probe+0x1cc/0) ... Cc: stable@vger.kernel.org Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-14usb: renesas: fix scheduling in atomic context bugGuennadi Liakhovetski
The current renesas_usbhs driver triggers BUG: scheduling while atomic: ksoftirqd/0/3/0x00000102 with enabled CONFIG_DEBUG_ATOMIC_SLEEP, by submitting DMA transfers from an atomic (tasklet) context, which is not supported by the shdma dmaengine driver. Fix it by switching to a work. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-14usb: renesas_usbhs: (cosmetic) simplify list operationsGuennadi Liakhovetski
list.h already provide helpers to find the first entry and to move list nodes to the tail of another list. This patch simply uses those helpers, no functional changes. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()Jesper Juhl
In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas_usbhs: add support for SUDMACShimoda, Yoshihiro
The SUDMAC uses 8-bit width only. So, when the driver uses SUDMAC, we have to clear the MBW_32. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas_usbhs: add IRQ resource decoding for IRQF_SHAREDShimoda, Yoshihiro
In case of the SH7757, the irq number of USB module and SUDMAC are the same. So, we have to set the IRQF_SHARED in such a case. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2011-12-22Merge branch 'for-gadget/next' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ...
2011-12-21usb: renesas: pipe: convert a long if into a XOR operationFelipe Balbi
This is just a minor optimization for the long if we have on the driver. When we want to check that one input is true and the other must be false, the bitwise XOR operator will achieve that for us. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15usb: renesas_usbhs: silence a gcc warningDan Carpenter
Gcc complains about this printk: drivers/usb/renesas_usbhs/mod_gadget.c:188:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15usb: renesas_usbhs: tidyup for smatch warningsKuninori Morimoto
This patch tidyup below smatch complaint drivers/usb/renesas_usbhs/mod_host.c +642 usbhsh_queue_done() warn: variable dereferenced before check 'urb' (see line 636) Special thanks to Dan Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13Merge branch 'for-next/gadget' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu() usb: renesas_usbhs: add force packet remove method usb: renesas_usbhs: care usb_hcd_giveback_urb() status usb: renesas_usbhs: add usbhsh_is_running() usb: renesas_usbhs: disable attch irq after device attached usb: renesas_usbhs: care pipe sequence usb: renesas_usbhs: add usbhs_pipe_attach() method usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case usb: renesas_usbhs: modify device attach method usb: renesas_usbhs: pop packet when urb dequeued usb: renesas_usbhs: add lost error value when enqueue usb: gadget: mv_udc: replace some debug info usb: gadget: mv_udc: refine suspend/resume function usb: gadget: mv_udc: refine the clock relative code usb: gadget: mv_udc: disable ISR when stopped usb: gadget: mv_udc: add otg relative code usb: gadget: Use kcalloc instead of kzalloc to allocate array usb: renesas_usbhs: remove the_controller_link usb: renesas_usbhs: add test-mode support usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable. ...
2011-12-13usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add force packet remove methodKuninori Morimoto
Packet should be force removed when reset/detach Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: care usb_hcd_giveback_urb() statusKuninori Morimoto
Without this patch, USB host hub shows error when cable was detached Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhsh_is_running()Kuninori Morimoto
It is possible to judge whether renesas_usbhs driver is running, by checking attch irq mask. This patch adds usbhsh_is_running() to check it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: disable attch irq after device attachedKuninori Morimoto
attch interrupt might happen infinitely on some USB hub (self power?). This patch disable attch irq after device attached, and enable it again when detach irq happen. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: care pipe sequenceKuninori Morimoto
driver has to re-use the limited pipe for each device/endpoint when it is USB host hub mode, since number of pipe has limitation. Then, each pipe should care own pipe sequence for next packet. This patch adds sequence control. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhs_pipe_attach() methodKuninori Morimoto
driver has to re-use the limited pipe for each device/endpoint when it is USB host hub mode, since number of pipe has limitation. This patch adds usbhsh_pipe_attach/detach() functions for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error caseKuninori Morimoto
This patch adds usbhsh_endpoint_detach_all() for error case. usbhs_endpoitn_xxx() functions were moved to upper side in source code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: modify device attach methodKuninori Morimoto
Current renesas_usbhs had been assigning udev to each urb. It was executed even though it was device0. For this reason, the device0 had to set the new device address which has still not been assigned. (it will be assigned on next step). Current renesas_usbhs used fixed address for it. but it is not good for USB hub support. This patch modifies this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12Merge branch 'for-next/dwc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits) usb: dwc3: ep0: fix for possible early delayed_status usb: dwc3: gadget: fix stream enable bit usb: dwc3: ep0: fix GetStatus handling (again) usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request usb: dwc3: use correct hwparam register for power mgm check usb: dwc3: omap: move to module_platform_driver usb: dwc3: workaround: missing disconnect event usb: dwc3: workaround: missing USB3 Reset event usb: dwc3: workaround: U1/U2 -> U0 transiton usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs() usb: dwc3: ep0: handle delayed_status again usb: dwc3: ep0: push ep0state into xfernotready processing usb: dwc3: fix sparse errors usb: dwc3: fix few coding style problems usb: dwc3: move generic dwc3 code from gadget into core usb: dwc3: use a helper function for operation mode setting usb: dwc3: ep0: don't use ep0in for transfers usb: dwc3: ep0: use proper endianess in SetFeature for wIndex usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX usb: dwc3: omap: add multiple instances support to OMAP ...
2011-12-12usb: renesas_usbhs: pop packet when urb dequeuedKuninori Morimoto
usbhsh_ureq_free() is not enough when urb dequeued. Without this patch, the driver can not recognize re-connected USB device after USB hub disconnected Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add lost error value when enqueueKuninori Morimoto
usbhsh_urb_enqueue() didn't have error value when usbhsh_device_attach() failed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add hcd->has_tt for low/full speedKuninori Morimoto
Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: typofix: irq_dtch control DTCHEKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: remove the_controller_linkKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). with this patch we can finally remove the global "the_controller_link" Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add test-mode supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable.Kuninori Morimoto
When poping packet from queue, it needs correct end procedure. This patch call usbhsg_queue_pop() in usbhsg_pipe_disable(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: send packet in necessary timing.Kuninori Morimoto
Current renesas_usbhs driver always tries to send packet in end of recip handler. But it breaks chapter 9 EndpointHalt test. This patch fixup this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add basic USB_REQ_GET_STATUS supportKuninori Morimoto
This patch adds basic get-status support for chapter 9 test. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add basic USB_REQ_SET_FEATURE supportKuninori Morimoto
This patch adds basic set-feature support for chapter 9 test. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add usbhs_pipe_is_stall()Kuninori Morimoto
This is preparation for chapter 9 test Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: remove superfluous usbhs_lock from recip handlerKuninori Morimoto
recip handler will call various functions which are holding usbhs_lock. This patch removes superfluous usbhs_lock from recip handler to escape double lock. [ balbi@ti.com : brushed up commit log a bit ] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz
This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_device_xx()Kuninori Morimoto
current mod_host used usbhs_device_alloc/free(), but allocated variable was attached to each xx->hcpriv. The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_endpoint_xx()Kuninori Morimoto
current mod_host used usbhs_endpoint_alloc/free(), but allocated variable was attached to each xx->hcpriv. The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_xx_queue_push()Kuninori Morimoto
This patch remove unneeded parameter from usbhsh_xx_queue_push() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: cleanup usbhsh_endpoint_xxx()Kuninori Morimoto
this patch cleanup - make sure static function - remove unneeded label - useless local variable were removed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: adds spin lock area on mod_hostKuninori Morimoto
spin lock was needed in mod_host. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: check device0 status when allocKuninori Morimoto
device0 was treated without checking in usbhsh_device_alloc(). but "udev->usbv" and "dev_set_drvdata()" will be overwritten if device0 was multi-allocated. This patch fixes this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: remove usbhsh_request listKuninori Morimoto
mod_host had usbhsh_request active/free list. it was almost meaningless, and vainly complicated. This patch remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: usbhs_set_device_config() care upphub/hubportKuninori Morimoto
current usbhs_set_device_config() didn't care upphub/hubport. This patch adds its value. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>