aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/renesas_usbhs
AgeCommit message (Collapse)Author
2012-01-24usb: renesas_usbhs: add IRQ resource decoding for IRQF_SHAREDShimoda, Yoshihiro
In case of the SH7757, the irq number of USB module and SUDMAC are the same. So, we have to set the IRQF_SHARED in such a case. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2011-12-22Merge branch 'for-gadget/next' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits) usb: dwc3: gadget: add support for SG lists usb: dwc3: gadget: don't force 'LST' always usb: dwc3: gadget: don't return anything on prepare trbs usb: dwc3: gadget: re-factor dwc3_prepare_trbs() usb: gadget: introduce support for sg lists usb: renesas: pipe: convert a long if into a XOR operation usb: gadget: remove useless depends on Kconfig usb: gadget: s3c-hsudc: remove the_controller global usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource usb: gadget: s3c-hsudc: Add regulator handling usb: gadget: s3c-hsudc: use udc_start and udc_stop functions usb: gadget: s3c-hsudc: move device registration to probe usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe usb: gadget: s3c-hsudc: add __devinit to probe function usb: gadget: s3c-hsudc: move platform_data struct to global header USB: EHCI: Add Marvell Host Controller driver USB: OTG: add Marvell usb OTG driver support usb: gadget: mv_udc: drop ARCH dependency usb: gadget: mv_udc: fix bug in ep_dequeue usb: gadget: enlarge maxburst bit width. ...
2011-12-21usb: renesas: pipe: convert a long if into a XOR operationFelipe Balbi
This is just a minor optimization for the long if we have on the driver. When we want to check that one input is true and the other must be false, the bitwise XOR operator will achieve that for us. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15usb: renesas_usbhs: silence a gcc warningDan Carpenter
Gcc complains about this printk: drivers/usb/renesas_usbhs/mod_gadget.c:188:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-15usb: renesas_usbhs: tidyup for smatch warningsKuninori Morimoto
This patch tidyup below smatch complaint drivers/usb/renesas_usbhs/mod_host.c +642 usbhsh_queue_done() warn: variable dereferenced before check 'urb' (see line 636) Special thanks to Dan Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13Merge branch 'for-next/gadget' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (50 commits) usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu() usb: renesas_usbhs: add force packet remove method usb: renesas_usbhs: care usb_hcd_giveback_urb() status usb: renesas_usbhs: add usbhsh_is_running() usb: renesas_usbhs: disable attch irq after device attached usb: renesas_usbhs: care pipe sequence usb: renesas_usbhs: add usbhs_pipe_attach() method usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error case usb: renesas_usbhs: modify device attach method usb: renesas_usbhs: pop packet when urb dequeued usb: renesas_usbhs: add lost error value when enqueue usb: gadget: mv_udc: replace some debug info usb: gadget: mv_udc: refine suspend/resume function usb: gadget: mv_udc: refine the clock relative code usb: gadget: mv_udc: disable ISR when stopped usb: gadget: mv_udc: add otg relative code usb: gadget: Use kcalloc instead of kzalloc to allocate array usb: renesas_usbhs: remove the_controller_link usb: renesas_usbhs: add test-mode support usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable. ...
2011-12-13usb: renesas_usbhs: show error reason on usbhsh_urb_enqueu()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add force packet remove methodKuninori Morimoto
Packet should be force removed when reset/detach Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: care usb_hcd_giveback_urb() statusKuninori Morimoto
Without this patch, USB host hub shows error when cable was detached Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhsh_is_running()Kuninori Morimoto
It is possible to judge whether renesas_usbhs driver is running, by checking attch irq mask. This patch adds usbhsh_is_running() to check it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: disable attch irq after device attachedKuninori Morimoto
attch interrupt might happen infinitely on some USB hub (self power?). This patch disable attch irq after device attached, and enable it again when detach irq happen. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: care pipe sequenceKuninori Morimoto
driver has to re-use the limited pipe for each device/endpoint when it is USB host hub mode, since number of pipe has limitation. Then, each pipe should care own pipe sequence for next packet. This patch adds sequence control. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhs_pipe_attach() methodKuninori Morimoto
driver has to re-use the limited pipe for each device/endpoint when it is USB host hub mode, since number of pipe has limitation. This patch adds usbhsh_pipe_attach/detach() functions for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: add usbhsh_endpoint_detach_all() for error caseKuninori Morimoto
This patch adds usbhsh_endpoint_detach_all() for error case. usbhs_endpoitn_xxx() functions were moved to upper side in source code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: modify device attach methodKuninori Morimoto
Current renesas_usbhs had been assigning udev to each urb. It was executed even though it was device0. For this reason, the device0 had to set the new device address which has still not been assigned. (it will be assigned on next step). Current renesas_usbhs used fixed address for it. but it is not good for USB hub support. This patch modifies this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12Merge branch 'for-next/dwc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next * 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (392 commits) usb: dwc3: ep0: fix for possible early delayed_status usb: dwc3: gadget: fix stream enable bit usb: dwc3: ep0: fix GetStatus handling (again) usb: dwc3: ep0: use dwc3_request for ep0 requsts instead of usb_request usb: dwc3: use correct hwparam register for power mgm check usb: dwc3: omap: move to module_platform_driver usb: dwc3: workaround: missing disconnect event usb: dwc3: workaround: missing USB3 Reset event usb: dwc3: workaround: U1/U2 -> U0 transiton usb: dwc3: gadget: return early in dwc3_cleanup_done_reqs() usb: dwc3: ep0: handle delayed_status again usb: dwc3: ep0: push ep0state into xfernotready processing usb: dwc3: fix sparse errors usb: dwc3: fix few coding style problems usb: dwc3: move generic dwc3 code from gadget into core usb: dwc3: use a helper function for operation mode setting usb: dwc3: ep0: don't use ep0in for transfers usb: dwc3: ep0: use proper endianess in SetFeature for wIndex usb: dwc3: core: drop DWC3_EVENT_BUFFERS_MAX usb: dwc3: omap: add multiple instances support to OMAP ...
2011-12-12usb: renesas_usbhs: pop packet when urb dequeuedKuninori Morimoto
usbhsh_ureq_free() is not enough when urb dequeued. Without this patch, the driver can not recognize re-connected USB device after USB hub disconnected Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add lost error value when enqueueKuninori Morimoto
usbhsh_urb_enqueue() didn't have error value when usbhsh_device_attach() failed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add hcd->has_tt for low/full speedKuninori Morimoto
Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: typofix: irq_dtch control DTCHEKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: remove the_controller_linkKuninori Morimoto
current renesas_usbhs is using new style udc_start/stop from af1d7056a5c1e5eaaf807ddd1423101db84668d0 (usb: gadget: renesas: convert to new style). with this patch we can finally remove the global "the_controller_link" Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add test-mode supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: call usbhsg_queue_pop() when pipe disable.Kuninori Morimoto
When poping packet from queue, it needs correct end procedure. This patch call usbhsg_queue_pop() in usbhsg_pipe_disable(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: send packet in necessary timing.Kuninori Morimoto
Current renesas_usbhs driver always tries to send packet in end of recip handler. But it breaks chapter 9 EndpointHalt test. This patch fixup this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add basic USB_REQ_GET_STATUS supportKuninori Morimoto
This patch adds basic get-status support for chapter 9 test. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add basic USB_REQ_SET_FEATURE supportKuninori Morimoto
This patch adds basic set-feature support for chapter 9 test. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: add usbhs_pipe_is_stall()Kuninori Morimoto
This is preparation for chapter 9 test Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: remove superfluous usbhs_lock from recip handlerKuninori Morimoto
recip handler will call various functions which are holding usbhs_lock. This patch removes superfluous usbhs_lock from recip handler to escape double lock. [ balbi@ti.com : brushed up commit log a bit ] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: rename usb_gadget_driver::speed to max_speedMichal Nazarewicz
This commit renames the “speed” field of the usb_gadget_driver structure to “max_speed”. This is so that to make it more apparent that the field represents the maximum speed gadget driver can support. This also make the field look more like fields with the same name in usb_gadget and usb_composite_driver structures. All of those represent the *maximal* speed given entity supports. After this commit, there are the following fields in various structures: * usb_gadget::speed - the current connection speed, * usb_gadget::max_speed - maximal speed UDC supports, * usb_gadget_driver::max_speed - maximal speed gadget driver supports, and * usb_composite_driver::max_speed - maximal speed composite gadget supports. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: replace usb_gadget::is_dualspeed with max_speedMichal Nazarewicz
This commit replaces usb_gadget's is_dualspeed field with a max_speed field. [ balbi@ti.com : Fixed DWC3 driver ] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_device_xx()Kuninori Morimoto
current mod_host used usbhs_device_alloc/free(), but allocated variable was attached to each xx->hcpriv. The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_endpoint_xx()Kuninori Morimoto
current mod_host used usbhs_endpoint_alloc/free(), but allocated variable was attached to each xx->hcpriv. The intuitively clear name was not xxx_alloc/free() but xxx_attach/detach(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: parameter cleanup for usbhsh_xx_queue_push()Kuninori Morimoto
This patch remove unneeded parameter from usbhsh_xx_queue_push() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: cleanup usbhsh_endpoint_xxx()Kuninori Morimoto
this patch cleanup - make sure static function - remove unneeded label - useless local variable were removed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: adds spin lock area on mod_hostKuninori Morimoto
spin lock was needed in mod_host. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: check device0 status when allocKuninori Morimoto
device0 was treated without checking in usbhsh_device_alloc(). but "udev->usbv" and "dev_set_drvdata()" will be overwritten if device0 was multi-allocated. This patch fixes this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: remove usbhsh_request listKuninori Morimoto
mod_host had usbhsh_request active/free list. it was almost meaningless, and vainly complicated. This patch remove it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: usbhs_set_device_config() care upphub/hubportKuninori Morimoto
current usbhs_set_device_config() didn't care upphub/hubport. This patch adds its value. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: cleanup usbhs_endpoint_disable()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: modify function name of usbhs_set_device_xx()Kuninori Morimoto
it was device configuration setting function, not only speed. This patch modify function name usbhs_set_device_speed() -> usbhs_set_device_config() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: usbhsh_ureq_alloc/free() care urb->hcprivKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: cleanup complicated ureq alloc/freeKuninori Morimoto
DCP data/status stage needs ureq to usbhs_pkt_push(), but sometimes, there is no data stage. In that case, allocated ureq was not freed, Current ureq alloc/free pair were difficult to understand. This patch removed unnecessary/un-understandable ureq alloc from usbhsh_urb_enqueue(), and create simpler alloc/free pair. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: unified callback functionKuninori Morimoto
renesas_usbhs needs callback for notify hotplug. but it were 2 methods which are almost same. This patch unified these into one. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: add platform power control functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: tidyup the unit of detection_delayKuninori Morimoto
detection_delay was assumed as msec Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: tidyup mod_host request variable nameKuninori Morimoto
renesas_usbhs driver use "req" for struct usb_ctrlrequest, and "ureq" for struct usbhsh_request Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: tidyup usbhs_sys_clock_ctrl() was local functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: renesas_usbhs: remove usbhs_sys_usb_ctrl()Kuninori Morimoto
usbhs_sys_usb_ctrl() can collect into usbhs_sys_host/function_ctrl(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-26 19:22:01 +0000