aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/musb
AgeCommit message (Collapse)Author
2011-03-02usb: musb: omap2430: fix kernel panic on rebootJohan Hovold
commit b193b412e62b134adf69af286c7e7f8e99259350 upstream. Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [<c02377d8>] lr : [<c02377cc>] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26) [<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13) [<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98) [<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-22usb: musb: blackfin: call gpio_free() on error path in musb_platform_init()Sergei Shtylyov
commit 00be545e49d83485d49a598d3b7e090088934be8 upstream. Blackfin's musb_platform_init() needs to call gpio_free() for error cleanup iff otg_get_transceiver() call returns NULL. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28usb: musb: gadget: restart request on clearing endpoint haltSergei Shtylyov
commit a666e3e6098a9f56310e4ec2705f1dad124a34b5 upstream. Commit 46034dca515bc4ddca0399ae58106d1f5f0d809f (USB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()) forgot to restart a queued request after clearing the endpoint halt feature. This results in a couple of USB resets while enumerating the file-backed storage gadget due to CSW packet not being sent for the MODE SENSE(10) command. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX styleMing Lei
commit bd2e74d657fc7d514881cc2117e323790b257914 upstream. For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in field of musb_hw_ep is intialized in musb_g_init_endpoints, and ep_out is not initialized, but musb_g_rx and rxstate may access ep_out field of musb_hw_ep by the method below: musb_ep = &musb->endpoints[epnum].ep_out which can cause the kernel panic[1] below, this patch fixes the issue by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo endpoint. [1], kernel panic [root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000 musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8 musb_g_rx 772: <== (null), rxcsr 4007 ffffffe8 musb_g_rx 786: iso overrun on ffffffe8 Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev Modules linked in: g_zero CPU: 0 Tainted: G W (2.6.35-rc6-gkh-wl+ #92) PC is at musb_g_rx+0xfc/0x2ec LR is at vprintk+0x3f4/0x458 pc : [<c02c07a4>] lr : [<c006ccb0>] psr: 20000193 sp : c760bd78 ip : c03c9d70 fp : c760bdbc r10: 00000000 r9 : fa0ab1e0 r8 : 0000000e r7 : c7e80158 r6 : ffffffe8 r5 : 00000001 r4 : 00004003 r3 : 00010003 r2 : c760bcd8 r1 : c03cd030 r0 : 0000002e Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8778c019 DAC: 00000017 Process kmemleak (pid: 421, stack limit = 0xc760a2e8) Stack: (0xc760bd78 to 0xc760c000) bd60: ffffffe8 c04b1b58 bd80: ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158 bda0: 0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4 bdc0: 00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158 bde0: c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08 be00: c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28 be20: c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001 be40: c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000 be60: 00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000 be80: c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8 bee0: c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000 bf00: c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28 bf20: c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000 bf40: c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00 bf60: c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88 bf80: c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944 bfa0: c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc bfc0: 00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70 bfe0: c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff Backtrace: [<c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<c02bcd68>] (musb_interrupt+0xbc8/0xcc0) [<c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<c02bcecc>] (generic_interrupt+0x6c/0x84) [<c02bce60>] (generic_interrupt+0x0/0x84) from [<c00ad698>] (handle_IRQ_event+0xa8/0x1ec) r7:c760a000 r6:0000005c r5:c7d2e300 r4:c7d2e300 [<c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<c00af984>] (handle_level_irq+0xc0/0x13c) [<c00af8c4>] (handle_level_irq+0x0/0x13c) from [<c0039080>] (asm_do_IRQ+0x80/0xa0) r7:00000002 r6:00000000 r5:00000000 r4:0000005c [<c0039000>] (asm_do_IRQ+0x0/0xa0) from [<c0039b6c>] (__irq_svc+0x4c/0xb4) Exception stack(0xc760be90 to 0xc760bed8) be80: 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff r5:fa200000 r4:ffffffff [<c0064eb8>] (sub_preempt_count+0x0/0x100) from [<c00ff7d0>] (find_and_get_object+0xd0/0x110) r5:c068bae8 r4:00000000 [<c00ff700>] (find_and_get_object+0x0/0x110) from [<c00ffdd8>] (scan_block+0x60/0x104) r8:00000001 r7:c0e23795 r6:c0d76a70 r5:60000013 r4:00000000 [<c00ffd78>] (scan_block+0x0/0x104) from [<c010014c>] (kmemleak_scan+0x140/0x484) [<c010000c>] (kmemleak_scan+0x0/0x484) from [<c01009a8>] (kmemleak_scan_thread+0x70/0xcc) r8:00000000 r7:c0100938 r6:00000000 r5:c7c33f04 r4:00012c00 [<c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<c0088000>] (kthread+0x90/0x98) r5:c7c33f04 r4:c760bfa8 [<c0087f70>] (kthread+0x0/0x98) from [<c006f5e8>] (do_exit+0x0/0x684) r7:00000013 r6:c006f5e8 r5:c0087f70 r4:c7c33f04 Code: e3002312 e58d6000 e2833e16 eb0422d5 (e5963020) ---[ end trace f3d5e96f75c297b7 ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06USB: musb: gadget_ep0: avoid SetupEnd interruptSergei Shtylyov
commit 17be5c5f5ef99c94374e07f71effa78e93a20eda upstream. Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-18USB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, againSergei Shtylyov
commit 196f1b7a387546f425df2f1fad26772e3d513aea upstream. Commit a5073b52833e4df8e16c93dc4cbb7e0c558c74a2 (musb_gadget: fix unhandled endpoint 0 IRQs) somehow missed its key change: "The gadget EP0 code routinely ignores an interrupt at end of the data phase because of musb_g_ep0_giveback() resetting the state machine to "idle, waiting for SETUP" phase prematurely." So, the majority of the cases of unhandled IRQs is still unfixed... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30USB: musb: Fix CPPI IRQs not being signaledDaniel Glöckner
On tx channel abort a cppi interrupt is generated for a short time by setting the lowest bit of the TCPPICOMPPTR register. It is then reset immediately by clearing the bit. When the interrupt handler is run, it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR registers and thus exits early without writing the TCPPIEOIR register. It appears that this inhibits further cppi interrupts until the handler is called by chance, f.ex. from davinci_interrupt(). By moving the unmasking of the interrupt below the writes to TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is necessary. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30USB: musb: respect usb_request->zero in control requestsDaniel Glöckner
In gadget mode the answer to a control request should be followed by a zero-length packet if the amount transferred is an exact multiple of the endpoint's packet size and the requests has its "zero" flag set. This patch prevents the request from being immediately removed from the queue when a control IN transfer ends on a full packet and "zero" is set. The next time ep0_txstate is entered, a zero-length packet is queued and the request is removed as fifo_count is 0. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30USB: musb: fix ISOC Tx programming for CPPI DMAsAjay Kumar Gupta
Isochronous Tx DMA is getting programmed but never getting started for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work. Fixing it by starting DMAs using musb_h_tx_dma_start(). Signed-off-by: Swaminathan S <swami.iyer@ti.com> Signed-off-by: Babu Ravi <ravibabu@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30USB: musb: Remove unwanted message in boot logAjay Kumar Gupta
Removes below unnecessary log of almost 28 lines during boot. musb_hdrc: hw_ep 0shared, max 64 musb_hdrc: hw_ep 1tx, max 512 musb_hdrc: hw_ep 1rx, max 512 ... ... musb_hdrc: hw_ep 13shared, max 4096 musb_hdrc: hw_ep 14shared, max 1024 musb_hdrc: hw_ep 15shared, max 1024 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-30USB: musb_gadget: fix STALL handlingSergei Shtylyov
The driver incorrectly cancels the mass-storage device CSW request (which leads to device reset) due to giving back URB at the head of endpoint's queue after sending each STALL handshake; stop doing that and start checking for the queue being non-empty before stalling an endpoint and disallowing stall in such case in musb_gadget_set_halt() like the other gadget drivers do. Moreover, the driver starts Rx request despite of the endpoint being halted -- fix this by moving the SendStall bit check from musb_g_rx() to rxstate(). And we also sometimes get into rxstate() with DMA still active after clearing an endpoint's halt (not clear why), so bail out in this case, similarly to what txstate() does... While at it, also do the following changes : - in musb_gadget_set_halt(), remove pointless Tx FIFO flushing (the driver does not allow stalling with non-empty Tx FIFO anyway); - in rxstate(), stop pointlessly zeroing the 'csr' variable; - in musb_gadget_set_halt(), move the 'done' label to a more proper place; - in musb_g_rx(), eliminate the 'done' label completely... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-12USB: musb: invert arch depend stringMike Frysinger
The MUSB code relies on platform implementations that currently only exists for Arm and Blackfin processors, so have the MUSB Kconfig depend upon those arches. This should prevent other arches from building MUSB via randconfig. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-09USB: musb: make HAVE_CLK support optionalMike Frysinger
The Blackfin port doesn't support HAVE_CLK and the musb driver works fine with support stubbed out, so take the existing Blackfin clk stubs and move them to common musb code so we can drop the Kconfig dependency. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: musb: fix put_device() call sequenceAjay Kumar Gupta
Invoke put_device(musb->xceiv->dev) before musb_platform_exit()as xceiv is getting unregistered in musb_platform_exit(). Fixes put_device() panic when module insert/removal is performed multiple times. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-10Merge branch 'master' into for-linusRafael J. Wysocki
2009-08-07USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-30Merge branch 'master' into for-linusRafael J. Wysocki
2009-07-28USB: musb: fix CONFIGDATA register read issueAjay Kumar Gupta
INDEX register has to be set to '0' before reading CONFIGDATA register which is only present in TI musb platforms. Currently the default register access mode is set to FLAT_MODE thus INDEX register is not getting set properly with musb_ep_select() which is just a nop operation in FLAT_MODE.This invalid register read is causing module reinset failure. Fixing the issue by moving INDEX register write part to musb_read_configdata() function itself. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: musb: Refer to musb_otg_timer_func under correct #ifdefAmit Kucheria
musb_otg_timer_func() is defined under #ifdef CONFIG_USB_MUSB_OTG. Make sure any reference to it is also under the same #ifdef. Without this fix, the driver failes to compile when USB_OTG is defined but USB_MUSB_OTG isn't. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: musb_gadget_ep0: fix typo in service_zero_data_request()Sergei Shtylyov
This function uses wrong bit mask to prevent clearing RXCSR status bits when halting an endpoint -- which results in clearing SentStall and RxPktRdy bits (that the code actually tries to avoid); must be a result of cut-and-paste... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-22USB: Rework musb suspend()/resume_early()Magnus Damm
This patch reworks platform driver power management code for musb from legacy callbacks to dev_pm_ops. The callbacks are converted for CONFIG_SUSPEND like this: suspend() -> suspend() resume_early() -> resume_noirq() Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ...
2009-07-12USB: musb_host: undo incorrect change in musb_advance_schedule()Sergei Shtylyov
Commit c9cd06b3d6ea825c62e277def929cc4315802b48 (musb_host: refactor URB giveback) included due to my overlook the change incorrect in the context of the current kernel -- undo it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: musb: silence "suspend as a_wait_vrise is_active" msgsDavid Brownell
Get rid of some obnoxious and inappropriate messaging, mostly on DaVinci, when usbcore tries to autosuspend a root hub if just a mini/micro-A connector is connected. Symptom: endless stream of messages reading like: musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1 Improve that musb bus suspend primitive a bit. Take advantage of this call to update the OTG state machine if appropriate, moving the device out of the A_WAIT_VRISE state. There's basically no timer for that state transition just now, except with tusb6010; that can make trouble. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: musb: davinci dm6446evm GPIO renumberingKevin Hilman
Numbering for GPIOs on the pcf857x chips on the dm644x EVM board changed when DaVinci chips with more GPIOs were supported. Update the GPIO number used for nVBUS_DRV. Longer term, we need a better abstraction of board-specific setup in this code so we're not hard-coding board specific GPIOs into the driver, but for now this at least gets it back to working with mainline davinci core code. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: musb: davinci dm355 updates (remainder)David Brownell
Finish merging updates for DM355 chips into musb/davinci.c now that its support is in mainline: kick in new DRVVBUS controls. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-15usb: musb: disable OTG AUTOIDLE only with omap3430Niilo Minkkinen
Omap3 MUSB AUTOIDLE functionality configured through OTG_SYSCONFIG register prevents the device from going into retention. This is a workaround (by Richard Woodruff/TI), as his comment : > A new MUSB bug which is a match to data below was identified very > recently (on hardware and in simulation). > This bug is in 3430 and not 3630. > As a priority test (and as new default) you should have engineers > disable autoidle for MUSB block. > This is the workaround which will show up in next errata. Signed-off-by: Niilo Minkkinen <ext-niilo.1.minkkinen@nokia.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: add high bandwidth ISO supportAjay Kumar Gupta
Tested on OMAP3 host side with Creative (Live! Cam Optia) USB camera which uses high bandwidth isochronous IN endpoints. FIFO mode 4 is updated to provide the needed 4K endpoint buffer without breaking the g_nokia composite gadget configuration. (This is the only gadget driver known to use enough endpoints to notice the change.) Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-15musb: use dma mode 1 for TX if transfer size equals maxpacket (v2)Anand Gadiyar
Currently, with Inventra DMA, we use Mode 0 if transfer size is less than or equal to the endpoint's maxpacket size. This requires that we explicitly set TXPKTRDY for that transfer. However the musb_g_tx code will not set TXPKTRDY twice if the last transfer is exactly equal to maxpacket, even if request->zero is set. Using Mode 1 will solve this; a better fix might be in musb_g_tx(). Without this change, musb will not correctly send out a ZLP if the last transfer is the maxpacket size and request->zero is set. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: support disconnect after HNP roleswitchDavid Brownell
Adjust HNP state machines in MUSB driver so that they handle the case where the cable is disconnected. The A-side machine was very wrong (unrecoverable); the B-Side was much less so. - A_PERIPHERAL ... as usual, the non-observability of the ID pin through Mentor's registers makes trouble. We can't go directly to A_WAIT_VFALL to end the session and start the disconnect processing. We can however sense link suspending, go to A_WAIT_BCON, and from there use OTG timeouts to finally trigger that A_WAIT_VFALL transition. (Hoping that nobody reconnects quickly to that port and notices the wrong state.) - B_HOST ... actually clear the Host Request (HR) bit as the messages say, disconnect the peripheral from the root hub, and don't detour through a suspend state. (In some cases this would eventually have cleaned up.) Also adjust the A_SUSPEND transition to respect the A_AIDL_BDIS timeout, so if HNP doesn't trigger quickly enough the A_WAIT_VFALL transition happens as it should. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: make initial HNP roleswitch work (v2)David Brownell
Minor HNP bugfixes, so the initial role switch works: - A-Device: * disconnect-during-suspend enters A_PERIPHERAL state * kill OTG timer after reset as A_PERIPHERAL ... * ... and also pass that reset to the gadget * once HNP succeeds, clear the "ignore_disconnect" flag * from A_PERIPHERAL, disconnect transitions to A_WAIT_BCON - B-Device: * kill OTG timer on entry to B_HOST state (HNP succeeded) * once HNP succeeds, clear "ignore_disconnect" flag * kick the root hub only _after_ the state is adjusted Other state transitions are left alone. Notably, exit paths from the "roles have switched" state ... A_PERIPHERAL handling of that stays seriously broken. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: otg timer cleanupDavid Brownell
Minor cleanup of OTG timer handling: * unify decls for OTG time constants, in the core header * set up and use that timer in a more normal way * move to the driver struct, so it's usable outside core And tighten use and setup of T(a_wait_bcon) so that if it's used, it's always valid. (If that timer expires, the A-device will stop powering VBUS. For non-OTG systems, that will be a surprise.) No behavioral changes, other than more consistency when applying that core HNP timeout. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: proper hookup to transceiver driversDavid Brownell
Let the otg_transceiver in MUSB be managed by an external driver; don't assume it's integrated. OMAP3 chips need it to be external, and there may be ways to interact with the transceiver which add functionality to the system. Platform init code is responsible for setting up the transeciver, probably using the NOP transceiver for integrated transceivers. External ones will use whatever the board init code provided, such as twl4030 or something more hands-off. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb: split out CPPI interrupt handlerSergei Shtylyov
As DaVinci DM646x has a dedicated CPPI DMA interrupt, replace cppi_completion() (which has always been kind of layering violation) by a complete CPPI interrupt handler. [ dbrownell@users.sourceforge.net: only cppi_dma.c needs platform device header, not cppi_dma.h ] Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_host: refactor URB givebackSergei Shtylyov
As musb_advance_schedule() is now the only remaning caller of musb_giveback() (and the only valid context of such call), just fold the latter into the former and then rename __musb_giveback() into musb_giveback(). This is a net minor shrink. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_host: streamline musb_cleanup_urb() callsSergei Shtylyov
The argument for the 'is_in' parameter of musb_cleanup_urb() is always extracted from an URB that's passed to the function. So that parameter is superfluous; remove it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_host: simplify check for active URBSergei Shtylyov
The existance of the scheduling list shouldn't matter in determining whether there's currectly an URB executing on a hardware endpoint. What should actually matter is the 'in_qh' or 'out_qh' fields of the 'struct musb_hw_ep' -- those are set in musb_start_urb() and cleared in musb_giveback() when the endpoint's URB list drains. Hence we should be able to replace the big *switch* statements in musb_urb_dequeue() and musb_h_disable() with mere musb_ep_get_qh() calls... While at it, do some more changes: - add 'is_in' variable to musb_urb_dequeue(); - remove the unnecessary 'epnum' variable from musb_h_disable(); - fix the comment style in the vicinity. This is a minor shrink of source and object code. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_host: factor out musb_ep_{get|set}_qh()Sergei Shtylyov
Factor out the often used code to get/set the active 'qh' pointer for the hardware endpoint. Change the way the case of a shared FIFO is handled by setting *both* 'in_qh' and 'out_qh' fields of 'struct musb_hw_ep'. That seems more consistent and makes getting to the current 'qh' easy when the code knows the direction beforehand. While at it, turn some assignments into intializers and fix declaration style in the vicinity. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_host: refactor musb_save_toggle() (take 2)Sergei Shtylyov
Refactor musb_save_toggle() as follows: - replace 'struct musb_hw_ep *ep' parameter by 'struct musb_qh *qh' to avoid re-calculating this value - move usb_settogle() call out of the *if* operator. This is a net minor shrink of source and object code. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_gadget: suppress "parasitic" TX interrupts with CPPISergei Shtylyov
Suppress "parasitic" endpoint interrupts in the DMA mode when using CPPI DMA driver; they're caused by the MUSB gadget driver using the DMA request mode 0 instead of the mode 1. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15musb_gadget: fix unhandled endpoint 0 IRQsSergei Shtylyov
The gadget EP0 code routinely ignores an interrupt at end of the data phase because of musb_g_ep0_giveback() resetting the state machine to "idle, waiting for SETUP" phase prematurely. The driver also prematurely leaves the status phase on receiving the SetupEnd interrupt. As there were still unhandled endpoint 0 interrupts happening from time to time after fixing these issues, there turned to be yet another culprit: two distinct gadget states collapsed into one. The (missing) state that comes after STATUS IN/OUT states was typically indiscernible from them since the corresponding interrupts tend to happen within too little period of time (due to only a zero-length status packet in between) and so they got coalesced; yet this state is not the same as the next one which is associated with the reception of a SETUP packet. Adding this extra state seems to have fixed the rest of the unhandled interrupts that generic_interrupt() and davinci_interrupt() hid by faking their result and only emitting a debug message -- so, stop doing that. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-23USB: musb: fix build when !CONFIG_PMAlexander Beregalov
Fix this build error when CONFIG_PM is not set: drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-23USB: musb: Remove my email address from few musb related driversJarkko Nikula
This email address is going to expire soon and my contribution to musb is next to zero so remove it. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb: fix possible panic while resumingKim Kyuwon
During driver resume processing, musb could cause a kernel panic. Fix by enabling the clock earlier, with the resume_early method. Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb: fix isochronous TXDMA (take 2)Sergei Shtylyov
Multi-frame isochronous TX URBs transfers in DMA mode never complete with CPPI DMA because musb_host_tx() doesn't restart DMA on the second frame, only emitting a debug message. With Inventra DMA they complete, but in PIO mode. To fix: - Factor out programming of the DMA transfer from musb_ep_program() into musb_tx_dma_program(); - Reorder the code at the end of musb_host_tx() to facilitate the fallback to PIO iff DMA fails; - Handle the buffer offset consistently for both PIO and DMA modes; - Add an argument to musb_ep_program() for the same reason (it only worked correctly with non-zero offset of the first frame in PIO mode); - Set the completed isochronous frame descriptor's 'actual_length' and 'status' fields correctly in DMA mode. Also, since CPPI reportedly doesn't like sending isochronous packets in the RNDIS mode, change the criterion for this mode to be used only for multi-packet transfers. (There's no need for that mode in the single-packet case anyway.) [ dbrownell@users.sourceforge.net: split comment paragraph into bullet list, shrink patch delta, style tweaks ] Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb: sanitize clearing TXCSR DMA bits (take 2)Sergei Shtylyov
The MUSB code clears TXCSR_DMAMODE incorrectly in several places, either asserting that TXCSR_DMAENAB is clear (when sometimes it isn't) or clearing both bits together. Recent versions of the programmer's guide require DMAENAB to be cleared first, although some older ones didn't. Fix this and while at it: - In musb_gadget::txstate(), stop clearing the AUTOSET and DMAMODE bits for the CPPI case since they never get set anyway (the former bit is reserved on DaVinci); but do clear the DMAENAB bit on the DMA error path. - In musb_host::musb_ep_program(), remove the duplicate DMA controller specific code code clearing the TXCSR previous state, add the code to clear TXCSR DMA bits on the Inventra DMA error path, to replace such code (executed late) on the PIO path. - In musbhsdma::dma_channel_abort()/dma_controller_irq(), add/use the 'offset' variable to avoid MUSB_EP_OFFSET() invocations on every RXCSR/TXCSR access. [dbrownell@users.sourceforge.net: don't introduce CamelCase, shrink diff] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb: bugfixes for multi-packet TXDMA supportSergei Shtylyov
We really want to use DMA mode 1 for all multi-packet transfers; that's one IRQ on DMA completion, instead of one per packet. There is an important issue with such transfers, especially on the host side: when such transfers end with a full-size packet, we must defer musb_dma_completion() calls until the FIFO empties. Else we report URB completions too soon, and may clobber data in the FIFO fifo when writing the next packet (losing data). The Inventra DMA support uses DMA mode 1, but it ignores that issue. The CPPI DMA support uses mode 0, but doesn't handle its TXPKTRDY interrupts quite right either; it can get stale "packet ready" interrupts, and report transfer completion too early using slightly different code paths, also losing data. So I'm solving it in a generic way -- by adding a sort of the "interrupt filter" into musb_host_tx(), catching these cases where a DMA completion IRQ doesn't suffice and removing some needlessly controller-specific logic. When a TXDMA interrupt happens and DMA request mode 1 is active, that filter resets to mode 0 and defers URB completion processing until TXPKTRDY, unless the FIFO is already empty. Related filtering logic in Inventra and CPPI code gets removed. Since it should be competely safe now to use the DMA request mode 1 for host side transfers with the CPPI DMA controller, set it in musb_h_tx_dma_start() ... now renamed (and shared). [ dbrownell@users.sourceforge.net: don't introduce more CamElCase; use more concise explanations ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb_host, fix ep0 fifo flushingDavid Brownell
The MUSB host side can't share generic TX FIFO flush logic with EP0; the EP0 TX status register bits are different from those for other entpoints. Resolve this issue by providing a new EP0-specific routine to flush and reset the FIFO, which pays careful attention to restrictions listed in the latest programmer's guide. This gets rid of an open issue whereby the usbtest control write test (#14) failed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: musb_host, minor enqueue locking fix (v2)David Brownell
Someone noted that the enqueue path used an unlocked access for usb_host_endpoint->hcpriv ... fix that, by being safe and always accessing it under spinlock protection. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-16 18:59:04 +0000