aboutsummaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2012-10-17iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout valuesNicholas Bellinger
commit cf0eb28d3ba60098865bf7dbcbfdd6b1cc483e3b upstream. This patch increases the default for nopin_timeout to 15 seconds (wait between sending a new NopIN ping) and nopin_response_timeout to 30 seconds (wait for NopOUT response before failing the connection) in order to avoid false positives by iSCSI Initiators who are not always able (under load) to respond to NopIN echo PING requests within the current 5 second window. False positives have been observed recently using Open-iSCSI code on v3.3.x with heavy large-block READ workloads over small MTU 1 Gb/sec ports, and increasing these values to more reasonable defaults significantly reduces the possibility of false positive NopIN response timeout events under this specific workload. Historically these have been set low to initiate connection recovery as soon as possible if we don't hear a ping back, but for modern v3.x code on 1 -> 10 Gb/sec ports these new defaults make alot more sense. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-17iscsit: remove incorrect unlock in iscsit_build_sendtargets_respChristoph Hellwig
commit 904753da183566c71211d23c169a80184648c121 upstream. Fix a potential multiple spin-unlock -> deadlock scenario during the overflow check within iscsit_build_sendtargets_resp() as found by sparse static checking. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-17iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-modeNicholas Bellinger
commit 38b11bae6ba02da352340aff12ee25755977b222 upstream. We've had reports in the past about this specific case, so it's time to go ahead and explicitly set cache_dynamic_acls=1 for generate_node_acls=1 (TPG demo-mode) operation. During normal generate_node_acls=0 operation with explicit NodeACLs -> se_node_acl memory is persistent to the configfs group located at /sys/kernel/config/target/$TARGETNAME/$TPGT/acls/$INITIATORNAME, so in the generate_node_acls=1 case we want the reservation logic to reference existing per initiator IQN se_node_acl memory (not to generate a new se_node_acl), so go ahead and always set cache_dynamic_acls=1 when TPG demo-mode is enabled. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-17target/file: Re-enable optional fd_buffered_io=1 operationNicholas Bellinger
commit b32f4c7ed85c5cee2a21a55c9f59ebc9d57a2463 upstream. This patch re-adds the ability to optionally run in buffered FILEIO mode (eg: w/o O_DSYNC) for device backends in order to once again use the Linux buffered cache as a write-back storage mechanism. This logic was originally dropped with mainline v3.5-rc commit: commit a4dff3043c231d57f982af635c9d2192ee40e5ae Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed May 30 16:25:41 2012 -0700 target/file: Use O_DSYNC by default for FILEIO backends This difference with this patch is that fd_create_virtdevice() now forces the explicit setting of emulate_write_cache=1 when buffered FILEIO operation has been enabled. (v2: Switch to FDBD_HAS_BUFFERED_IO_WCE + add more detailed comment as requested by hch) Reported-by: Ferry <iscsitmp@bananateam.nl> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-17iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDUNicholas Bellinger
commit f25590f39d543272f7ae7b00d533359c8d7ff331 upstream. This patch adds a missing iscsi_reject->ffffffff assignment within iscsit_send_reject() code to properly follow RFC-3720 Section 10.17 Bytes 16 -> 19 for the PDU format definition of ISCSI_OP_REJECT. We've not seen any initiators care about this bytes in practice, but as Ronnie reported this was causing trouble with wireshark packet decoding lets go ahead and fix this up now. Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-17target: fix return code in target_core_init_configfs error pathPeter Senna Tschudin
commit 37bb7899ca366dc212b71b150e78566d04808cc0 upstream. This patch fixes error cases within target_core_init_configfs() to properly set ret = -ENOMEM before jumping to the out_global exception path. This was originally discovered with the following Coccinelle semantic match information: Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-10-10target: Fix ->data_length re-assignment bug with SCSI overflowNicholas Bellinger
commit 4c054ba63ad47ef244cfcfa1cea38134620a5bae upstream. This patch fixes a long-standing bug with SCSI overflow handling where se_cmd->data_length was incorrectly being re-assigned to the larger CDB extracted allocation length, resulting in a number of fabric level errors that would end up causing a session reset in most cases. So instead now: - Only re-assign se_cmd->data_length durining UNDERFLOW (to use the smaller value) - Use existing se_cmd->data_length for OVERFLOW (to use the smaller value) This fix has been tested with the following CDB to generate an SCSI overflow: sg_raw -r512 /dev/sdc 28 0 0 0 0 0 0 0 9 0 Tested using iscsi-target, tcm_qla2xxx, loopback and tcm_vhost fabric ports. Here is a bit more detail on each case: - iscsi-target: Bug with open-iscsi with overflow, sg_raw returns -3584 bytes of data. - tcm_qla2xxx: Working as expected, returnins 512 bytes of data - loopback: sg_raw returns CHECK_CONDITION, from overflow rejection in transport_generic_map_mem_to_cmd() - tcm_vhost: Same as loopback Reported-by: Roland Dreier <roland@purestorage.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-09-12target: fix NULL pointer dereference bug alloc_page() fails to get memoryYi Zou
commit d0e27c88d795fb9647153063ec48051fd84e1731 upstream. I am hitting this bug when the target is low in memory that fails the alloc_page() for the newly submitted command. This is a sort of off-by-one bug causing NULL pointer dereference in __free_page() since 'i' here is really the counter of total pages that have been successfully allocated here. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Andy Grover <agrover@redhat.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Open-FCoE.org <devel@open-fcoe.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02iscsi-target: Drop bogus struct file usage for iSCSI/SCTPAl Viro
commit bf6932f44a7b3fa7e2246a8b18a44670e5eab6c2 upstream. From Al Viro: BTW, speaking of struct file treatment related to sockets - there's this piece of code in iscsi: /* * The SCTP stack needs struct socket->file. */ if ((np->np_network_transport == ISCSI_SCTP_TCP) || (np->np_network_transport == ISCSI_SCTP_UDP)) { if (!new_sock->file) { new_sock->file = kzalloc( sizeof(struct file), GFP_KERNEL); For one thing, as far as I can see it'not true - sctp does *not* depend on socket->file being non-NULL; it does, in one place, check socket->file->f_flags for O_NONBLOCK, but there it treats NULL socket->file as "flag not set". Which is the case here anyway - the fake struct file created in __iscsi_target_login_thread() (and in iscsi_target_setup_login_socket(), with the same excuse) do *not* get that flag set. Moreover, it's a bloody serious violation of a bunch of asserts in VFS; all struct file instances should come from filp_cachep, via get_empty_filp() (or alloc_file(), which is a wrapper for it). FWIW, I'm very tempted to do this and be done with the entire mess: Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Grover <agrover@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02target: Check number of unmap descriptors against our limitRoland Dreier
commit 7409a6657aebf8be74c21d0eded80709b27275cb upstream. Fail UNMAP commands that have more than our reported limit on unmap descriptors. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02target: Fix possible integer underflow in UNMAP emulationRoland Dreier
commit b7fc7f3777582dea85156a821d78a522a0c083aa upstream. It's possible for an initiator to send us an UNMAP command with a descriptor that is less than 8 bytes; in that case it's really bad for us to set an unsigned int to that value, subtract 8 from it, and then use that as a limit for our loop (since the value will wrap around to a huge positive value). Fix this by making size be signed and only looping if size >= 16 (ie if we have at least a full descriptor available). Also remove offset as an obfuscated name for the constant 8. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02target: Fix reading of data length fields for UNMAP commandsRoland Dreier
commit 1a5fa4576ec8a462313c7516b31d7453481ddbe8 upstream. The UNMAP DATA LENGTH and UNMAP BLOCK DESCRIPTOR DATA LENGTH fields are in the unmap descriptor (the payload transferred to our data out buffer), not in the CDB itself. Read them from the correct place in target_emulated_unmap. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02target: Add range checking to UNMAP emulationRoland Dreier
commit 2594e29865c291db162313187612cd9f14538f33 upstream. When processing an UNMAP command, we need to make sure that the number of blocks we're asked to UNMAP does not exceed our reported maximum number of blocks per UNMAP, and that the range of blocks we're unmapping doesn't go past the end of the device. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-08-02target: Add generation of LOGICAL BLOCK ADDRESS OUT OF RANGERoland Dreier
commit e2397c704429025bc6b331a970f699e52f34283e upstream. Many SCSI commands are defined to return a CHECK CONDITION / ILLEGAL REQUEST with ASC set to LOGICAL BLOCK ADDRESS OUT OF RANGE if the initiator sends a command that accesses a too-big LBA. Add an enum value and case entries so that target code can return this status. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25target: Fix range calculation in WRITE SAME emulation when num blocks == 0Roland Dreier
commit 1765fe5edcb83f53fc67edeb559fcf4bc82c6460 upstream. When NUMBER OF LOGICAL BLOCKS is 0, WRITE SAME is supposed to write all the blocks from the specified LBA through the end of the device. However, dev->transport->get_blocks(dev) (perhaps confusingly) returns the last valid LBA rather than the number of blocks, so the correct number of blocks to write starting with lba is dev->transport->get_blocks(dev) - lba + 1 (nab: Backport roland's for-3.6 patch to for-3.5) Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25target: Clean up returning errors in PR handling codeRoland Dreier
commit d35212f3ca3bf4fb49d15e37f530c9931e2d2183 upstream. - instead of (PTR_ERR(file) < 0) just use IS_ERR(file) - return -EINVAL instead of EINVAL - all other error returns in target_scsi3_emulate_pr_out() use "goto out" -- get rid of the one remaining straight "return." Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-25tcm_fc: Fix crash seen with aborts and large readsMark Rustad
commit 3cc5d2a6b9a2fd1bf024aa5e52dd22961eecaf13 upstream. This patch fixes a crash seen when large reads have their exchange aborted by either timing out or being reset. Because the exchange abort results in the seq pointer being set to NULL, because the sequence is no longer valid, it must not be dereferenced. This patch changes the function ft_get_task_tag to return ~0 if it is unable to get the tag for this reason. Because the get_task_tag interface provides no means of returning an error, this seems like the best way to fix this issue at the moment. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-07-12tcm_fc: Resolve suspicious RCU usage warningsMark Rustad
commit 863555be0c81558b1af277addcf68acb8f778860 upstream. Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-19target: Return error to initiator if SET TARGET PORT GROUPS emulation failsRoland Dreier
commit 59e4f541baf728dbb426949bfa9f6862387ffd0e upstream. The error paths in target_emulate_set_target_port_groups() are all essentially "rc = -EINVAL; goto out;" but the code at "out:" ignores rc and always returns success. This means that even if eg explicit ALUA is turned off, the initiator will always see a good SCSI status for SET TARGET PORT GROUPS. Fix this by returning rc as is intended. It appears this bug was added by the following patch: commit 05d1c7c0d0db4cc25548d9aadebb416888a82327 Author: Andy Grover <agrover@redhat.com> Date: Wed Jul 20 19:13:28 2011 +0000 target: Make all control CDBs scatter-gather Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: we have transport_complete_task() and not target_complete_cmd()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-06-10target/file: Use O_DSYNC by default for FILEIO backendsNicholas Bellinger
commit a4dff3043c231d57f982af635c9d2192ee40e5ae upstream. Convert to use O_DSYNC for all cases at FILEIO backend creation time to avoid the extra syncing of pure timestamp updates with legacy O_SYNC during default operation as recommended by hch. Continue to do this independently of Write Cache Enable (WCE) bit, as WCE=0 is currently the default for all backend devices and enabled by user on per device basis via attrib/emulate_write_cache. This patch drops the now unnecessary fd_buffered_io= token usage that was originally signalling when to explictly disable O_SYNC at backend creation time for buffered I/O operation. This can end up being dangerous for a number of reasons during physical node failure, so go ahead and drop this option for now when O_DSYNC is used as the default. Also allow explict FUA WRITEs -> vfs_fsync_range() call to function in fd_execute_cmd() independently of WCE bit setting. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [bwh: Backported to 3.2: - We have fd_do_task() and not fd_execute_cmd() - Various fields are in struct se_task rather than struct se_cmd - fd_create_virtdevice() flags initialisation hasn't been cleaned up]
2012-05-20target: Fix bug in handling of FILEIO + block_device resize opsNicholas Bellinger
commit cd9323fd68aee3c1c6b5b21e5746c9d1b586fb58 upstream. This patch fixes a bug in the handling of FILEIO w/ underlying block_device resize operations where the original fd_dev->fd_dev_size was incorrectly being used in fd_get_blocks() for READ_CAPACITY response payloads. This patch avoids using fd_dev->fd_dev_size for FILEIO devices with an underlying block_device, and instead changes fd_get_blocks() to get the sector count directly from i_size_read() as recommended by hch. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-20target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setupsBernhard Kohl
commit edc318d9fea6854df752ec8c645b960b0d5a1d23 upstream. This patch addresses a bug in a special case for target core SPC-2 RELEASE logic where the same physical client (eg: iSCSI InitiatorName) with differing iSCSI session identifiers (ISID) is allowed to incorrectly release the same client's SPC-2 reservation from the non reservation holding path. Note this bug is specific to iscsi-target w/ SPC-2 reservations, and with the default enforce_pr_isids=1 device attr setting in target-core controls if a InitiatorName + different ISID reservations are handled the same as a single iSCSI client entity. Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-05-20target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversionNicholas Bellinger
commit cfebf8f42f47327fa54cf05c19b98f4bd5236a26 upstream. This patch removes some potentially problematic legacy code within core_clear_initiator_node_from_tpg() that was originally intended to release left over se_lun_acl setup during dynamic NodeACL+MappedLUN generate when running with TPG demo-mode operation. Since we now only ever expect to allocate and release se_lun_acl from within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and target_fabric_drop_mappedlun() context respectively, this code for demo-mode release is incorrect and needs to be removed. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2012-04-13tcm_fc: Do not free tpg structure during wq allocation failureMark Rustad
commit 06383f10c49f507220594a455c6491ca6f8c94ab upstream. Avoid freeing a registered tpg structure if an alloc_workqueue call fails. This fixes a bug where the failure was leaking memory associated with se_portal_group setup during the original core_tpg_register() call. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13tcm_fc: Add abort flag for gracefully handling exchange timeoutMark Rustad
commit e1c4038282c7586c3544542b37872c434669d3ac upstream. Add abort flag and use it to terminate processing when an exchange is timed out or is reset. The abort flag is used in place of the transport_generic_free_cmd function call in the reset and timeout cases, because calling that function in that context would free memory that was in use. The aborted flag allows the lifetime to be managed in a more normal way, while truncating the processing. This change eliminates a source of memory corruption which manifested in a variety of ugly ways. (nab: Drop unused struct fc_exch *ep in ft_recv_seq) Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13target: Fix unsupported WRITE_SAME sense payloadMartin Svec
commit 67236c44741e250199ccd77f1115568e68cf8848 upstream. This patch fixes a bug in target-core where unsupported WRITE_SAME ops from a target_check_write_same_discard() failure was incorrectly returning CHECK_CONDITION w/ TCM_INVALID_CDB_FIELD sense data. This was causing some clients to not properly fall back, so go ahead and use the correct TCM_UNSUPPORTED_SCSI_OPCODE sense for this case. Reported-by: Martin Svec <martin.svec@zoner.cz> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulationRoland Dreier
commit 33395fb8a13731c7ef7b175dbf5a4d8a6738fe6c upstream. The old code did (MSB << 8) & 0xff, which always evaluates to 0. Just use get_unaligned_be16() so we don't have to worry about whether our open-coded version is correct or not. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02target: prevent NULL pointer dereference in target_report_lunsJörn Engel
commit 47f1b8803e1e358ebbf4f82bfdb98971c912a2c3 upstream. transport_kmap_data_sg can return NULL. I never saw this trigger, but returning -ENOMEM seems better than a crash. Also removes a pointless case while at it. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02target: fix use after free in target_report_lunsJörn Engel
commit 382436f8804fe1cb20b9a2a811a10eb2d8554721 upstream. Fix possible NULL pointer dereference in target_report_luns failure path. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02target: Don't set WBUS16 or SYNC bits in INQUIRY responseRoland Dreier
commit effc6cc8828257c32c37635e737f14fd6e19ecd7 upstream. SPC-4 says about the WBUS16 and SYNC bits: The meanings of these fields are specific to SPI-5 (see 6.4.3). For SCSI transport protocols other than the SCSI Parallel Interface, these fields are reserved. We don't have a SPI fabric module, so we should never set these bits. (The comment was misleading, since it only mentioned Sync but the actual code set WBUS16 too). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02tcm_fc: Fix fc_exch memory leak in ft_send_resp_statusNicholas Bellinger
commit 031ed4d565b31880a4136bb7366bc89f5b1dba7d upstream. This patch fixes a bug in tcm_fc where fc_exch memory from fc_exch_mgr->ep_pool is currently being leaked by ft_send_resp_status() usage. Following current code in ft_queue_status() response path, using lport->tt.seq_send() needs to be followed by a lport->tt.exch_done() in order to release fc_exch memory back into libfc_em kmem_cache. ft_send_resp_status() code is currently used in pre submit se_cmd ft_send_work() error exceptions, TM request setup exceptions, and main TM response callback path in ft_queue_tm_resp(). This bugfix addresses the leak in these cases. Cc: Mark D Rustad <mark.d.rustad@intel.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02iscsi-target: Fix dynamic -> explict NodeACL pointer referenceNicholas Bellinger
commit d06283341aee9e48eff1b068779d340785c635ce upstream. This patch fixes a free after use in lio_target_make_nodeacl() where iscsi_node_acl was referenced from the original se_nacl_new allocation, instead of from core_tpg_add_initiator_node_acl() in the case of dynamic -> explict NodeACL conversion. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02iscsi-target: Fix iscsit_alloc_buffs() failure casesNicholas Bellinger
commit d335e6054db616bce3f040e659fa38440518ad1d upstream. Make iscsit_alloc_buffs() failure case for page_alloc_failed use correct __free_page() SGL pointer, and return -ENOMEM for iscsit_allocate_iovecs failure to push se_cmd->t_mem_sg release into iscsit_release_cmd() callback during iscsit_add_reject_from_cmd() connection reset. Also drop cmd->t_mem_sg = NULL assignment from page_alloc_failed failure case. Reported-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-02tcm_loop: Set residual field for SCSI commandsRoland Dreier
commit 6cf3fa6918baab0c447f1206f1cef9166ad04864 upstream. If the target core signals an over- or under-run, tcm_loop should call scsi_set_resid() to tell the SCSI midlayer about the residual data length. The difference can be seen by doing something like strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null and looking at the "resid=" part of the SG_IO ioctl -- after this patch, the field is correctly reported as 512. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-19target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASENicholas Bellinger
commit 087a03b3ea1c8d6e2d5743a8d1c6d571058caa04 upstream. This patch addresses a bug with target_check_scsi2_reservation_conflict() return checking in target_scsi2_reservation_[reserve,release]() that was preventing CRH=1 operation from silently succeeding in the two special cases defined by SPC-3, and not failing with reservation conflict status when dealing with legacy RESERVE/RELEASE + active SPC-3 PR logic. Also explictly set cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT during the early non reservation holder failure from pr_ops->t10_seq_non_holder() check in transport_generic_cmd_sequencer() for fabrics that already expect it to be set. This bug was originally introduced in mainline commit: commit eacac00ce5bfde8086cd0615fb53c986f7f970fe Author: Christoph Hellwig <hch@infradead.org> Date: Thu Nov 3 17:50:40 2011 -0400 target: split core_scsi2_emulate_crh Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-19iscsi-target: Fix reservation conflict -EBUSY response handling bugNicholas Bellinger
commit 00fdc6bbef77844ce397a7de7acfaf25e8e2e4eb upstream. This patch addresses a iscsi-target specific bug related to reservation conflict handling in iscsit_handle_scsi_cmd() that has been causing reservation conflicts to complete and not fail as expected due to incorrect errno checking. The problem occured with the change to return -EBUSY from transport_generic_cmd_sequencer() -> transport_generic_allocate_tasks() failures, that broke iscsit_handle_scsi_cmd() checking for -EINVAL in order to invoke a non GOOD status response. This was manifesting itself as data corruption with legacy SPC-2 reservations, but also effects iscsi-target LUNs with SPC-3 persistent reservations. This bug was originally introduced in lio-core commit: commit 03e98c9eb916f3f0868c1dc344dde2a60287ff72 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Fri Nov 4 02:36:16 2011 -0700 target: Address legacy PYX_TRANSPORT_* return code breakage Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29target: Allow control CDBs with data > 1 pageAndy Grover
commit 4949314c7283ea4f9ade182ca599583b89f7edd6 upstream. We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0Roland Dreier
commit bf0053550aebe56f3bb5dd793e9de69238b5b945 upstream. My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Return correct ASC for unimplemented VPD pagesRoland Dreier
commit bb1acb2ee038a6c13ee99e0b9fb44dacb4a9de84 upstream. My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Add workaround for zero-length control CDB handlingNicholas Bellinger
commit 91ec1d3535b2acf12c599045cc19ad9be3c6a47b upstream. This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}Roland Dreier
commit 9fbc8909876a2160044e71d376848973b9bfdc3f upstream. According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Allow PERSISTENT RESERVE IN for non-reservation holderMarco Sanvido
commit 6816966a8418b980481b4dced7eddd1796b145e8 upstream. Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido <marco@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13target: Use correct preempted registration sense codeMarco Sanvido
commit 9e08e34e3735ae057eb3834da3570995811b7eb9 upstream. The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido <marco@purestorage.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INITNicholas Bellinger
commit 2f9bc894c67dbacae5a6a9875818d2a18a918d18 upstream. This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by: Dax Kelson <dkelson@gurulabs.com> Reported-by: Andy Grover <agrover@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13iscsi-target: Fix double list_add with iscsit_alloc_buffs rejectNicholas Bellinger
commit cd931ee62fd0258fc85c76a7c5499fe85e0f3436 upstream. This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13iscsi-target: Fix reject release handling in iscsit_free_cmd()Nicholas Bellinger
commit c1ce4bd56f2846de55043374598fd929ad3b711b upstream. This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98 [ 131.191092] [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [<ffffffff811d0279>] __list_del_entry+0x8d/0x98 [ 131.191092] [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [<ffffffff8138f706>] ? schedule+0x55/0x57 [ 131.191092] [<ffffffff81056c7d>] kthread+0x7d/0x85 [ 131.191092] [<ffffffff81399534>] kernel_thread_helper+0x4/0x10 [ 131.191092] [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [<ffffffff81399530>] ? gs_change+0x13/0x13 Reported-by: <jrepac@yahoo.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-25target: Set additional sense length field in sense dataRoland Dreier
commit 895f3022523361e9b383cf48f51feb1f7d5e7e53 upstream. The target code was not setting the additional sense length field in the sense data it returned, which meant that at least the Linux stack ignored the ASC/ASCQ fields. For example, without this patch, on a tcm_loop device: # sg_raw -v /dev/sda 2 0 0 0 0 0 gives cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Raw sense data (in hex): 70 00 05 00 00 00 00 00 while after the patch we correctly get the following (which matches what a regular disk returns): cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid command operation code Raw sense data (in hex): 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25target: Set response format in INQUIRY responseRoland Dreier
commit ce136176fea522fc8f4c16dcae7e8ed1d890ca39 upstream. Current SCSI specs say that the "response format" field in the standard INQUIRY response should be set to 2, and all the real SCSI devices I have do put 2 here. So let's do that too. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-06iscsi-target: Fix hex2bin warn_unused compile messageNicholas Bellinger
Fix the following compile warning with hex2bin() usage: drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’: drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Don't return an error if disabling unsupported featuresAndy Grover
If an attribute is present (but not yet supported) it should be OK to write 0 (a no-op) to the attribute. This is an issue because userspace should be able to save and restore all set attribute values without error. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-02 20:27:52 +0000