aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2009-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) mac80211: check interface is down before type change cfg80211: fix NULL ptr deref libertas if_usb: Fix crash on 64-bit machines mac80211: fix reason code output endianness mac80211: fix addba timer ath9k: fix misplaced semicolon on rate control b43: Fix DMA TX bounce buffer copying mac80211: fix BSS leak rt73usb.c : more ids ipw2200: fix oops on missing firmware gre: Fix dev_addr clobbering for gretap sky2: set carrier off in probe net: fix sk_forward_alloc corruption pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames ibmtr: possible Read buffer overflow? net: Fix RPF to work with policy routing net: fix kmemcheck annotations e1000e: rework disable K1 at 1000Mbps for 82577/82578 e1000e: config PHY via software after resets ...
2009-10-29pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of PreMax ethernet pcmcia card, and some Sierra Wireless serial card(AC555, AC7xx, AC8xx). use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule powerpc: Minor cleanup to lib/Kconfig.debug powerpc: Minor cleanup to sound/ppc/Kconfig powerpc: Minor cleanup to init/Kconfig powerpc: Limit memory hotplug support to PPC64 Book-3S machines powerpc: Limit hugetlbfs support to PPC64 Book-3S machines powerpc: Fix compile errors found by new ppc64e_defconfig powerpc: Add a Book-3E 64-bit defconfig powerpc/booke: Fix xmon single step on PowerPC Book-E powerpc: Align vDSO base address powerpc: Fix segment mapping in vdso32 powerpc/iseries: Remove compiler version dependent hack powerpc/perf_events: Fix priority of MSR HV vs PR bits powerpc/5200: Update defconfigs drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM powerpc/boot/dts: drop obsolete 'fsl5200-clocking' of: Remove nested function mpc5200: support for the MAN mpc5200 based board mucmc52 mpc5200: support for the MAN mpc5200 based board uc101
2009-10-298250_pci: add IBM Saturn serial cardBenjamin Herrenschmidt
The IBM Saturn serial card has only one port. Without that fixup, the kernel thinks it has two, which confuses userland setup and admin tools as well. [akpm@linux-foundation.org: fix pci-ids.h layout] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Michael Reed <mreed10@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29serial: add ADDI-DATA GmbH PCI-Express communication cards in 8250_pci.c and ↵Krauth.Julien
pci_ids.h Add support for ADDI-DATA GmbH PCI-Express communication cards: APCIe-7300 APCIe-7420 APCIe-7500 APCIe-7800 Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c Signed-off-by: Krauth Julien <Krauth.Julien@addi-data.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29atmel_serial: fix bad BUILD_BUG_ON() usageHaavard Skinnemoen
is_power_of_2() appears not to be constant enough for BUILD_BUG_ON() after the latest rework, so replace it with an open-coded test. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jan Beulich <jbeulich@novell.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-28Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-10-15drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEMJulia Lawall
As in the commit 9b4a1617772d6d5ab5eeda0cd95302fae119e359, use UPIO_MEM rather than SERIAL_IO_MEM. Both have the same value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @has_sc@ @@ #include <linux/serial_core.h> @depends on has_sc@ @@ - SERIAL_IO_MEM + UPIO_MEM // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-12tty, serial: Fix race and NULL check in uart_close()Linus Torvalds
Commit 46d57a449aa1 ("serial: use tty_port pointers in the core code") contained two bugs that causes (rare) crashes: - the rename typoed one site - a NULL check was missed Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) ethoc: limit the number of buffers to 128 ethoc: use system memory as buffer ethoc: align received packet to make IP header at word boundary ethoc: fix buffer address mapping ethoc: fix typo to compute number of tx descriptors au1000_eth: Duplicate test of RX_OVERLEN bit in update_rx_stats() netxen: Fix Unlikely(x) > y pasemi_mac: ethtool get settings fix add maintainer for network drop monitor kernel service tg3: Fix phylib locking strategy rndis_host: support ETHTOOL_GPERMADDR ipv4: arp_notify address list bug gigaset: add kerneldoc comments gigaset: correct debugging output selection gigaset: improve error recovery gigaset: fix device ERROR response handling gigaset: announce if built with debugging gigaset: handle isoc frame errors more gracefully gigaset: linearize skb gigaset: fix reject/hangup handling ...
2009-10-05pcnet_cs: add cis of National Semicondoctor's multifunction pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card, NE2K, tamarack ethernet card, and some serial card(COMpad2, COMpad4). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort() ARM: 5740/1: fix valid_phys_addr_range() range check ARM: 5739/1: ARM: allow empty ATAG_CORE ARM: 5735/1: sa1111: CodingStyle cleanups ARM: 5738/1: Correct TCM documentation ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs ARM: 5733/1: fix bcmring compile error ARM: 5732/1: remove redundant include file ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3 ARM: Ensure do_cache_op takes mmap_sem ARM: Fix __cpuexit section mismatch warnings ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast ARM: includecheck fix: mach-davinci, board-dm365-evm.c ARM: Remove unused CONFIG SA1100_H3XXX ARM: Fix warning: unused variable 'highmem' ARM: Fix warning: #warning syscall migrate_pages not implemented ARM: Fix SA11x0 clocksource warning ARM: Fix SA1100 Neponset serial section mismatch ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings ...
2009-10-01serial: add parameter to force skipping the test for the TXEN bugChuck Ebbert
Allow users to force skipping the TXEN test at init time. Applies to all serial ports. Intended for debugging only. There is a blacklist for devices where we need to skip the test but the list is not complete. This lets users force skipping the test so we can determine if they need to be added to the list. Some HP machines with weird serial consoles have this problem and there may be more. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01icom: convert space to tabsBreno Leitao
Convert spaces to tabs and remove wrong spaces Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <Scott.Kilau@digi.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01serial_txx9: use container_of() instead of direct castAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01uartlite: allow building for timberdale MFDRichard Röjfors
Some configurations of the Timberdale FPGA has the uartlite included. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-30MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-28ARM: Fix SA1100 Neponset serial section mismatchRussell King
WARNING: vmlinux.o(.devinit.text+0x524): Section mismatch in reference from the function neponset_probe() to the function .init.text:sa1100_register_uart_fns() The function __devinit neponset_probe() references a function __init sa1100_register_uart_fns(). If sa1100_register_uart_fns is only used by neponset_probe then annotate sa1100_register_uart_fns with a matching annotation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Fix build of cpm_uart due to core changes powerpc/8xx: Fix regression introduced by cache coherency rewrite powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx powerpc/mm: Fix 40x and 8xx vs. _PAGE_SPECIAL powerpc: Cleanup linker script using new linker script macros. powerpc: Fix ibm,client-architecture-support printout powerpc: Increase NODES_SHIFT on 64bit from 4 to 8 powerpc/perf_counter: Fix vdso detection powerpc: Move 64bit heap above 1TB on machines with 1TB segments powerpc: Change archdata dma_data to a union powerpc: Rename get_dma_direct_offset get_dma_offset powerpc/mm: Remove duplicated #include powerpc/book3e-64: Remove duplicated #include powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLE powerpc/pmc: Don't access lppaca on Book3E powerpc: kmalloc failure ignored in vio_build_iommu_table() hvc_console: Provide (un)locked version for hvc_resize()
2009-09-24Merge branch 'for-linus' of git://repo.or.cz/cris-mirrorLinus Torvalds
* 'for-linus' of git://repo.or.cz/cris-mirror: CRIS: Cleanup linker script using new linker script macros. ARRAY_SIZE changes CRIS: convert to asm-generic/hardirq.h CRISv10: Don't autonegotiate if autonegotiation is off CRIS: fix defconfig build failure CRIS: add pgprot_noncached
2009-09-24Merge branch 'origin' into for-linusRussell King
Conflicts: MAINTAINERS
2009-09-24Fix build of cpm_uart due to core changesBenjamin Herrenschmidt
Commit ebd2c8f6d2ec4012c267ecb95e72a57b8355a705 "serial: kill off uart_info" broke the build of this driver, this fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-23serial core: fix new kernel-doc warningsRandy Dunlap
Fix new kernel-doc warnings in serial_core.[hc] files. Warning(include/linux/serial_core.h:485): No description found for parameter 'uport' Warning(include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change' Warning(include/linux/serial_core.h:511): No description found for parameter 'uport' Warning(include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change' Warning(drivers/serial/serial_core.c:2437): No description found for parameter 'uport' Warning(drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port' Warning(drivers/serial/serial_core.c:2509): No description found for parameter 'uport' Warning(drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22Merge branch 'master' into for-linusRussell King
2009-09-21Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-09-19uartlite: support shared interrupt linesPeter Korsgaard
Adapt isr to work with shared interrupt lines. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Set proper console speed on resume if console suspend is disabledDeepak Saxena
Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC XO laptop. Basically what happens is that upon returning from resume, serial8250_resume_port() will reconfigure the port for high speed mode and all console output will be garbled, making debug of the resume path painful. This patch modifies uart_resume_port() to reset the port to the state it was in before we suspended. Original patch by Marcelo Tosatti Second patch by Deepak then reworked by Alan to fit with the tty changes before it got submitted. Also fixed the console path to set c_i/ospeed as some drivers require the termios fields are valid Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: introduce tty krefsAlan Cox
Initially just use the helper and thus krefs when we set and clear the port values. Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: kill USF_CLOSING_* definitionsAlan Cox
The serial layer for some reason uses different defines for the special case close delays and then conditionally switches to/from the normal ones in the ioctls. Remove this rather pointless abstraction Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move port users helperAlan Cox
This little helper is now tty_port specific and useful generally so move it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move delta_msr_wait into the tty_portAlan Cox
This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: replace the state mutex with the tty port mutexAlan Cox
They cover essentially the same stuff and we can therefore fold it into the tty_port one. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move the flags into the tty_port fieldAlan Cox
Fortunately the serial layer was designed to use the same flag values but with different names. It has its own SUSPENDED flag which is a free slot in the ASYNC flags so we allocate it in the ASYNC flags instead. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: move count into the tty_port versionAlan Cox
Remove more stuff from the serial special case code Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: use tty_port pointers in the core codeAlan Cox
Extract out a lot of the x.port. uses and also show up where there are things left to be isolated that prevent use using the port helpers in the serial layer at this point Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19serial: Fold closing_* fields into the tty_port onesAlan Cox
Remove some more serial specific use Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: kill off uart_infoAlan Cox
We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-198250: Now honours baud rate lower boundsAnton Vorontsov
A platform clock drives 8250 ports in most SOC systems, the clock might run at high frequencies, and so it's not always possible to downscale uart clock to a desired value. Currently the 8250 uart driver accepts not supported baud rates, and what is worse, it is doing this silently, and then passes not accepted values to a new termios, so userspace has no chance to catch this kind of errors (userspace verifies that settings were accepted by reading back and comparing the settings). This patch fixes the issue by passing minimum baud rate to the uart_get_baud_rate() call, the call should take care of all bounds, so userspace should now report: # stty -F /dev/ttyS0 speed 300 115200 stty: /dev/ttyS0: unable to perform all requested operations p.s. uart_get_baud_rate() falls back to 9600, which still might be too low for some 10 GHz platforms, but that's a separate issue, and we can wait with fixing this till we find such a platform. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: 8250: add IRQ trigger supportVikram Pandita
There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs) This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver Changes are backward compatible with boards passing UPF_SHARE_IRQ flag Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq [Moved new flag to end to fix bugs in the original with the old_serial array -- Alan] Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: icom: bit and/or confusion?Roel Kluin
Previously, if any bit other than CMD_SND_BREAK was set, CMD_SND_BREAK was not unset. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: serial/pcmcia: add ID for Advantech cardWolfram Sang
Add ID as reported in: http://lists.infradead.org/pipermail/linux-pcmcia/2009-May/006127.html Reported-by: Kenneth Moorman <KMoorman@transy.edu> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: bfin_5xx: fix building as module when early printk is enabledMike Frysinger
Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
2009-09-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Clean up linker script using standard macros. [IA64] Use standard macros for page-aligned data. [IA64] Use .ref.text, not .text.init for start_ap. [IA64] sgi-xp: fix printk format warnings [IA64] ioc4_serial: fix printk format warnings [IA64] mbcs: fix printk format warnings [IA64] pci_br, fix infinite loop in find_free_ate() [IA64] kdump: Short path to freeze CPUs [IA64] kdump: Try INIT regardless of [IA64] kdump: Mask INIT first in panic-kdump path [IA64] kdump: Don't return APs to SAL from kdump [IA64] kexec: Unregister MCA handler before kexec [IA64] kexec: Make INIT safe while transition to [IA64] kdump: Mask MCA/INIT on frozen cpus Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's suggestion.
2009-09-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) be2net: fix some cmds to use mccq instead of mbox atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA pkt_sched: Fix qstats.qlen updating in dump_stats ipv6: Log the affected address when DAD failure occurs wl12xx: Fix print_mac() conversion. af_iucv: fix race when queueing skbs on the backlog queue af_iucv: do not call iucv_sock_kill() twice af_iucv: handle non-accepted sockets after resuming from suspend af_iucv: fix race in __iucv_sock_wait() iucv: use correct output register in iucv_query_maxconn() iucv: fix iucv_buffer_cpumask check when calling IUCV functions iucv: suspend/resume error msg for left over pathes wl12xx: switch to %pM to print the mac address b44: the poll handler b44_poll must not enable IRQ unconditionally ipv6: Ignore route option with ROUTER_PREF_INVALID bonding: make ab_arp select active slaves as other modes cfg80211: fix SME connect rc80211_minstrel: fix contention window calculation ssb/sdio: fix printk format warnings p54usb: add Zcomax XG-705A usbid ...
2009-09-16Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-15[IA64] ioc4_serial: fix printk format warningsRandy Dunlap
drivers/serial/ioc4_serial.c:943: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Pat Gefre <pfg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-15pcnet_cs: add cis of Linksys multifunction pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of Linksys lan&modem mulitifunction pcmcia card and some modem card(MT5634ZLX, RS-COM-2P). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-12Merge branch 'master' into develRussell King
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-17 18:38:40 +0000