aboutsummaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2010-10-07Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: of/i2c: Fix module load order issue caused by of_i2c.c i2c: Fix checks which cause legacy suspend to never get called i2c-pca: Fix waitforcompletion() return value i2c: Fix for suspend/resume issue i2c: Remove obsolete cleanup for clientdata
2010-10-02regulator: max8649 - fix setting extclk_freqAxel Lin
The SYNC bits are BIT6 and BIT7 of MAX8649_SYNC register. pdata->extclk_freq could be [0|1|2]. (MAX8649_EXTCLK_26MHZ|MAX8649_EXTCLK_13MHZ|MAX8649_EXTCLK_19MHZ) It requires to left shift 6 bits to properly set extclk_freq. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02regulator: fix typo in current unitsCyril Chemparathy
This patch fixes a typo that incorrectly reports mA numbers as uA. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02regulator: fix device_register() error handlingVasiliy Kulikov
If device_register() fails then call put_device(). See comment to device_register. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-06regulator: wm8350-regulator - fix the logic of checking ↵Axel Lin
REGULATOR_MODE_STANDBY mode In wm8350_dcdc_set_mode(), we set DCx_SLEEP bit of WM8350_DCDC_SLEEP_OPTIONS register for REGULATOR_MODE_STANDBY mode. ( DCx_SLEEP bits: 0: Normal DC-DC operation 1: Select LDO mode ) In wm8350_dcdc_get_mode(), current logic to determinate REGULATOR_MODE_STANDBY mode is just reverse. ( sleep is set should mean REGULATOR_MODE_STANDBY mode. ) Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-06regulator: wm831x-ldo - fix the logic to set REGULATOR_MODE_IDLE and ↵Axel Lin
REGULATOR_MODE_STANDBY modes Problem description in current implementation: When setting REGULATOR_MODE_IDLE mode, current implementation set WM831X_LDO1_LP_MODE bit of ctrl_reg (which is wrong, it should clear the bit). But due to a missing break statement for case REGULATOR_MODE_IDLE, the code fall through to case REGULATOR_MODE_STANDBY and then clear WM831X_LDO1_LP_MODE bit. So it still looks OK when checking the status by wm831x_gp_ldo_get_mode(). When setting REGULATOR_MODE_STANDBY mode, it just does not work. wm831x_gp_ldo_get_mode() will still return REGULATOR_MODE_IDLE because the accordingly WM831X_LDO1_LP_MODE bit is clear. Correct behavior should be: Clear WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_IDLE mode. Set WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_STANDBY mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-05regulator: ab8500 - fix off-by-one value range checking for selectorAxel Lin
selector is used as array index of info->supported_voltages Thus the valid value range should be 0 .. info->voltages_len -1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-05regulator: 88pm8607 - fix value range checking for accessing info->vol_tableAxel Lin
In choose_voltage(), we use i as array index of info->vol_table. The valid value range for i should be 0 .. ARRAY_SIZE(info->vol_table) - 1. Take LDO1 as example, ARRAY_SIZE(LDO1_table) is 4, vol_nbits of LDO1 is 2. for (i = 0; i < (2 << info->vol_nbits); i++) is equivalent to for (i = 0; i < 8; i++) which is wrong. The same value range checking also applies for index in pm8607_list_voltage(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: isl6271a-regulator - fix regulator_desc parameter for ↵Axel Lin
regulator_register() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ad5398 - fix a memory leakAxel Lin
In current implementation, the address return from regulator_register() is different from the address for regulator_unregister(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: set max8998->dev to &pdev->dev.Axel Lin
max8998->dev is NULL in current implementation, set it to &pdev->dev. regulator_register() still return success if max8998->dev is NULL, but rdev->dev.parent will be set to NULL which is incorrect. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6586x-regulator - fix bit_mask parameter for tps6586x_set_bits()Axel Lin
The third parameter of tps6586x_set_bits() is the bit_mask, thus we should use (1 << ri->go_bit) instead of ri->go_bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6586x-regulator - fix value range checking for valAxel Lin
val is used as array index of ri->voltages. Thus the valid value range should be 0 .. ri->desc.n_voltages - 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max8998 - set max8998->num_regulatorsAxel Lin
Set max8998->num_regulators = pdata->num_regulators, otherwise it's default value is 0. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max8998 - fix memory allocation size for max8998->rdevAxel Lin
We only use max8998->rdev[0] .. max8998->rdev[pdata->num_regulators-1], max8998->rdev[pdata->num_regulators] is not used. Thus fix the memory allocation size. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: tps6507x - remove incorrect commentsAxel Lin
This driver is a platform driver, not a i2c driver. Thus remove incorrect tps6507x_remove comments. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: max1586 - improve the logic of choosing selectorAxel Lin
A little bit improvement in the logic of choosing selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ab8500 - fix the logic to remove already registered regulators in ↵Axel Lin
error path In current implementation, ab8500_regulator_info[0].regulator is not unregistered if the error happen at i > 0. This patch fixes the resource leak and also improves the readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator: ab3100 - fix the logic to remove already registered regulators in ↵Axel Lin
error path In current implementation, ab3100_regulators[0].rdev is not unregistered if the error happen at i > 0. This patch fixes the resource leak and also improves the readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-01regulator/ab8500: move dereference below the check for NULLDan Carpenter
I moved the dereference of "ab8500" below the check for NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: Remove default DEBUG define from TPS6586xMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probeAxel Lin
We should call platform_set_drvdata() before calling platform_get_drvdata(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()Axel Lin
i2c_smbus_write_byte_data() returns zero or negative value, therefore no need to check if ret is greater than zero or not. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: max8660 - fix a memory leak in max8660_remove()Axel Lin
In max8660_probe(), we allocate memory for max660. In max8660_remove(), current implementation only free rdev which is a member of struct max8660. Thus, there is a small memory leak when we unload the module. This patch fixes the memory leak by passing max660 to i2c clientdata, and properly kfree(max8660) in max8660_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: max1586 - fix a memory leak in max1586_pmic_remove()Axel Lin
In max1586_pmic_probe(), we allocate memory for max1586. In max1586_pmic_remove(), current implementation only free rdev which is a member of struct max1586_data. Thus, there is a small memory leak when we unload the module. This patch fixes the memory leak by passing max1586 to i2c clientdata, and properly kfree(max1586) in max1586_pmic_remove(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: Default GPIO controlled WM8994 regulators to disabledJoonyoung Shim
This ensures that if the GPIO was not enabled prior to the driver starting the regulator API will insert the required powerup ramp delay when it enables the regulator. The gpiolib API does not provide this information. [Rewrote changelog to describe the actual change -- broonie.] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write()Axel Lin
We already check count value before calling i2c_smbus_read_byte_data(), no need to check it again. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11max8998: fix off-by-one value range checkingAxel Lin
In max8998_list_voltage() and max8998_set_voltage(), we use ldo as array index of ldo_voltage_map. Thus the valid range should be 0 .. ARRAY_SIZE(ldo_voltage_map)-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6586x: fix millivolt return values and SM2 tableGary King
Hi Liam, Below are bugfixes for the tps6586x spotted by Gary King. Please add this patch to your regulator tree. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: tps6586x: add dependancy on MFD_TPS6585xMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: add TPS6586X regulator driverMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltageMyungJoo Ham
Two issues are addressed for max8998_set_voltage function. 1. Min/Max Voltage. max8998_set_voltage had been using the voltage value of min ( voltage[i] >= max_vol , i ) This is corrected to use: min ( voltage[i] >= min_vol , i ) 2. Ramp Up Delay. max8998_set_voltage should provide delay for BUCK1/2 if ENRAMP is on. It reads RAMP value from ONOFF4 register to determine RAMP delay length. However, when max8998_set_voltage's new voltage is lower than the previous, we don't care because it does not deteriorate the stability. Changes since v1: - rebased onto latest regulator-for-next tree Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: add support for regulators on the ab8500 MFDSundar R IYER
Hi Mark, > I think that's everything. Please find the updated patch set as below. >From f4bf7eec4d210db5075c0bce4521d9be6bc76c8c Mon Sep 17 00:00:00 2001 From: Sundar R Iyer <sundar.iyer@stericsson.com> Date: Sun, 6 Jun 2010 19:12:12 +0530 Subject: [PATCH v3 1/2] regulator: add support for regulators on the ab8500 MFD Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11tps65023: Allow registering similar TPS65021Marek Vasut
TPS65021 is an older model and is slightly weaker (can supply less current), otherwise is the same. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11drivers: regulators: depend on MFD_MAX8998Marek Szyprowski
The MAX8998-pmic driver requires a core driver for all io operations. Like other regulator driver make it depend of the required MFD io driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11drivers: regulator: add Maxim 8998 driverKyungmin Park
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11ISL6271A voltage regulator support.Marek Vasut
This device is very simple, it supports one buck and two LDOs. The LDOs are fixed-voltage. Only the buck is programable over the I2C bus to 16 possible voltages. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: make sure the regulator is available prior to the consumers.Sonic Zhang
Some systems are likely to want this to be subsys_initcall() to make sure the regulator is available prior to the consumers. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-11regulator: new drivers for AD5398 and AD5821Sonic Zhang
The AD5398 and AD5821 are single 10-bit DAC with 120 mA output current sink capability. They feature an internal reference and operates from a single 2.7 V to 5.5 V supply. This driver supports both the AD5398 and the AD5821. It adapts into the voltage and current framework. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-05regulator: Remove owner field from attribute initialization in regulator ↵Guenter Roeck
core driver Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH registerAnuj Aggarwal
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> In TPS6507x, depending on the status of DEFDCDC{2,3} pin either DEFDCDC{2,3}_LOW or DEFDCDC{2,3}_HIGH register needs to be read or programmed to change the output voltage. The current driver assumes DEFDCDC{2,3} pins are always tied low and thus operates only on DEFDCDC{2,3}_LOW register. This need not always be the case (as is found on OMAP-L138 EVM). Unfortunately, software cannot read the status of DEFDCDC{2,3} pins. So, this information is passed through platform data depending on how the board is wired. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27wm8350-regulator: fix wm8350_register_regulator error handlingAxel Lin
In the case of platform_device_add() fail, we should call platform_device_put() instead of platform_device_del() Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-07-27ab3100: fix off-by-one value range checking for voltage selectorAxel Lin
We use voltage selector as an array index for typ_voltages. Thus the valid range for voltage selector should be 0..voltages_len-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-06-03i2c: Remove all i2c_set_clientdata(client, NULL) in driversWolfram Sang
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b04de15f6b63da5ccdd373ffa3057a3681 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-28mfd: AB3100 register access change to abx500 APIMattias Wallin
The interface for the AB3100 is changed to make way for the ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson Analog Baseband chips. The register access functions are moved out to a separate struct abx500_ops. In this way the interface is moved from the implementation and the sub functionality drivers can keep their interface intact when chip infrastructure and communication mechanisms changes. We also define the AB3550 device IDs and the AB3550 platform data struct and convert the catenated 32bit event to an array of 3 x 8bits. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Renamed ab3100.h to abx500.hLinus Walleij
The goal here is to make way for a more general interface for the analog baseband chips ab3100 ab3550 ab550 and future chips. This patch have been divided into two parts since both changing name and content of a file is not recommended in git. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Add TPS6507x supportTodd Fischer
TPS6507x are multi function (PM, touchscreen) chipsets from TI. This commit also changes the corresponding regulator driver from being standalone to an MFD subdevice. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28regulator: tps6057x namespace cleanupTodd Fischer
Move from using tps or tsp6507x to tps6057x_pmic in a consistent manner. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-13 21:40:30 +0000