aboutsummaryrefslogtreecommitdiff
path: root/drivers/nfc
AgeCommit message (Collapse)Author
2012-11-20NFC: Fix pn533 target mode memory leakThierry Escande
In target mode, sent sk_buff were not freed in pn533_tm_send_complete Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20NFC: pn533: Fix mem leak in pn533_in_dep_link_upWaldemar Rymarkiewicz
cmd is allocated in pn533_dep_link_up and passed as an arg to pn533_send_cmd_frame_async together with a complete cb. arg is passed to the cb and must be kfreed there. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20NFC: pn533: Fix use after freeSzymon Janc
cmd was freed in pn533_dep_link_up regardless of pn533_send_cmd_frame_async return code. Cmd is passed as argument to pn533_in_dep_link_up_complete callback and should be freed there. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-20NFC: pn533: Fix missing lock while operating on commands listSzymon Janc
In pn533_wq_cmd command was removed from list without cmd_lock held (race with pn533_send_cmd_frame_async) which could lead to list corruption. Delete command from list before releasing lock. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Fix missing mutex unlock in pn533_send_cmd_frame_asyncSzymon Janc
If command allocation failed cmd_lock was not released and deadlock would occur. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: xmit from hci ops must return 0 or negativeWaldemar Rymarkiewicz
xmit callback provided by a driver encapsulates upper layers data and sends it to the hardware. So, HCI does not know the exact amount of data being sent and thus can't handle partially sent frames properly. Therefore, the driver must return 0 for completely sent frame or negative for failure. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Acked-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Remove the pn544 raw driverCong Wang
This was scheduled for 3.6, we're late. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Move the pn544_hci dereference below the NULL testWei Yongjun
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Move the nfcwilink dereference below the NULL testWei Yongjun
spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Changed HCI and PN544 HCI driver to use the new HCI LLC CoreEric Lapuyade
The previous shdlc HCI driver and its header are removed from the tree. PN544 now registers directly with HCI and passes the name of the llc it requires (shdlc). HCI instantiation now allocates the required llc instance. The llc is started when the HCI device is brought up. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Modified hci_transceive to become an asynchronous operationEric Lapuyade
This enables the completion callback to be called from a different context, preventing a possible deadlock if the callback resulted in the invocation of a nested call to the currently locked nfc_dev. This is also more in line with the im_transceive nfc_ops for NFC Core or NCI drivers which already behave asynchronously. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Remove crc generation from shdlc layerWaldemar Rymarkiewicz
Checksum is specific for a chip spcification and it varies (in size and type) between different hardware. It should be handled in the driver then. Moreover, shdlc spec doesn't mention crc as a part of the frame. Update pn544_hci driver as well. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Acked-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Set the IRQF_ONESHOT flag from the pn544_hci IRQ handler requestSamuel Ortiz
As we don't have a primary handler but only a threaded one, __setup_irq() ends up failing if we don't set this flag. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Don't use WQ_MEM_RECLAIM for pn533Tejun Heo
NFC driver doesn't sit in memory reclaim path and has no reason to use WQ_MEM_RECLAIM. Drop WQ_MEM_RECLAIM from pn533->wq and use alloc_ordered_workqueue() instead of WQ_UNBOUND w/ max_active == 1. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Use module_platform_driver macro for nfcwilink.cSyam Sidhardhan
Simplify the code by make use of module_platform_driver macro. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Queue pn533 commandsSamuel Ortiz
Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add ISO 14443 type B protocolSamuel Ortiz
Some devices (e.g. Sony's PaSoRi) can not do type B polling, so we have to make a distinction between ISO14443 type A and B poll modes. Cc: Eric Lapuyade <eric.lapuyade@intel.com> Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Use communicate thru only for PaSoRi when trying to read Felica tagsSamuel Ortiz
Otherwise DATA_EXCHANGE seems to be just fine. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Add initial Sony RC-S360 support to pn533Samuel Ortiz
Sony RC-S360 is also known as the Sony PaSoRi contactless reader. Only type 2, 3 and 4 tag reading is supported at the moment. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: Allow HCI driver to pre-open pipes to some gatesEric Lapuyade
Some NFC chips will statically create and open pipes for both standard and proprietary gates. The driver can now pass this information to HCI such that HCI will not attempt to create and open them, but will instead directly use the passed pipe ids. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09NFC: update PN544 HCI driver state when opened/closedEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Monitor pn533 target modeSamuel Ortiz
When receiving a DEP link down event, we should cancel all pending URBs if we're activated as a target or if we're an initiator. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Convert pn533 from semaphore to mutexSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Set the proper baud rate when trying to activate pn533 targetsSamuel Ortiz
We get the right baud rate from the last polled modulation. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Implement pn533 polling loopSamuel Ortiz
After going through all the modulations, the pn533 driver spends 2 seconds listening for targets. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Add type A and type F parameters for pn533 target modeSamuel Ortiz
Without those settings several devices will not activate pn533 as a target. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Add passive initiator data for pn533Samuel Ortiz
When trying to enable a DEP link as a passive initiator, pn533 needs to provide the polling request command payload. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Configure pn533 RF timingsSamuel Ortiz
Those define the ATR_RES response timeout after which the pn533 considers the target to be mute. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Unregister device if pn533 initial configuration failsSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Reset poll mod list when stopping pn533 pollSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Implement the pn533 target mode Tx opSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Implement the pn533 target mode data fetching routineSamuel Ortiz
This one needs to be called as soon as we are activated as a target, for the pn533 to receive the first SYMM and keep the LLCP link alive. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Introduce target mode tx opsSamuel Ortiz
And rename the initiator mode data exchange ops for consistency sake. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Add target mode activation netlink eventSamuel Ortiz
Userspace gets a netlink event upon target mode activation. The LLCP layer is also signaled when we get an ATR_REQ in order to get the remote general bytes. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Implement pn533 target mode polling loopSamuel Ortiz
We only want to support p2p target mode for now, no host card emulation. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-04NFC: Add target mode protocols to the polling loop startup routineSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-25NFC: potential integer overflow problem in check_crc()Dan Carpenter
If "buf[0]" is 255 then "len" gets set to 0. The call to "crc_ccitt(0xffff, buf, len - 2);" casts the "len - 2" to a high positive number which is ugly. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: HCI based pn544 driverEric Lapuyade
This is an NFC driver for NXP pn544. Unlike pn544.c, this one is based on the NFC HCI and SHDLC kernel layers. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Remove unneeded pn533 dev NULL checkDan Carpenter
container_of() works by subtracting the offset of the member. The math can't really return a zero here. Sometimes people check it when they actually meant to check something else but in this case we can just remove the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15NFC: Cache the core NFC active target pointer instead of its indexEric Lapuyade
The NFC Core now caches the active nfc target pointer, thereby avoiding the need to lookup the target table for each invocation of a driver ops. Consequently, pn533, HCI and NCI now directly receive an nfc_target pointer instead of a target index. Cc: Ilan Elias <ilane@ti.com> Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: pn533 Rx chaining supportSamuel Ortiz
When buffers on the receiption path exceed 262 bytes, the pn533 uses a chaining mechanism where the initiator has to send NULL data frames to fetch the remaining frames. We do that from a workqueue context while holding the cmd lock. Once the MI bit is gone, we aggregate the queued received skbs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Convert pn533 from tasklet to workqueuesSamuel Ortiz
There is no need for soft IRQ contexts, and workqueues are more flexible. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Remove the rf mode parameter from the DEP link up routineSamuel Ortiz
When calling nfc_dep_link_up, we implicitely are in initiator mode. Which means we also can provide the general bytes as a function argument, as all drivers will eventually request them. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export NFCID when detecting a p2p target with pn533Samuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export Jewel/Topaz ID from pn533Samuel Ortiz
The jewel ID is the NFCID1 for Topaz NFC tags. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export sensf from pn533Samuel Ortiz
sensf is the detection response for Felica NFC tags. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Clear pn533 target structureSamuel Ortiz
The polled target structure should be memset to 0 in order to avoid sel_res and sens_res garbage. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06NFC: Export NFCID1 from pn533Samuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Free sk_buff if nfcwilink_send failsIlan Elias
Free sk_buff if nfcwilink_send fails. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24NFC: Download TI NFC init scriptIlan Elias
Download TI NFC init script during nfcwilink open operation, after the NFC channel is registered with TI shared transport. TI NFC init script is written in BTS format. First, read the chip version via a special vendor specific command. Second, we request the relevant BTS file from the user space, and then send the BTS commands to the chip. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 20:48:03 +0000