aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-10-19bonding: fix wrong port enabling in 802.3adFlavio Leitner
The port shouldn't be enabled unless its current MUX state is DISTRIBUTING which is correctly handled by ad_mux_machine(), otherwise the packet sent can be lost because the other end may not be ready. The issue happens on every port initialization, but as the ports are expected to move quickly to DISTRIBUTING, it doesn't cause much problem. However, it does cause constant packet loss if the other peer has the port configured to stay in STANDBY (i.e. SYNC set to OFF). Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19r8169: fix wrong eee setting for rlt8111evlhayeswang
Correct the wrong parameter for setting EEE for RTL8111E-VL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19r8169: fix driver shutdown WoL regression.françois romieu
Due to commit 92fc43b4159b518f5baae57301f26d770b0834c9 ("r8169: modify the flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on RxConfig bits which are needed for WOL on some versions of the hardware. As these bits were formerly set from the r81{0x, 68}_pll_power_down methods, factor them out for use in the driver shutdown (rtl_shutdown) handler. I favored __rtl8169_get_wol() -hardware state indication- over RTL_FEATURE_WOL as the latter has become a good candidate for removal. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Tested-by: Marc Ballarin <ballarin.marc@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19phylib: Modify Vitesse RGMII skew settingsAndy Fleming
The Vitesse driver was using the RGMII_ID interface type to determine if skew was necessary. However, we want to move away from using that interface type, as it's really a property of the board's PHY connection. However, some boards depend on it, so we want to support it, while allowing new boards to use the more flexible "fixups" approach. To do this, we extract the code which adds skew into its own function, and call that function when RGMII_ID has been selected. Another side-effect of this change is that if your PHY has skew set already, it doesn't clear it. This way, the fixup code can modify the register without config_init then clearing it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19pptp: pptp_rcv_core() misses pskb_may_pull() callEric Dumazet
e1000e uses paged frags, so any layer incorrectly pulling bytes from skb can trigger a BUG in skb_pull() [951.142737] [<ffffffff813d2f36>] skb_pull+0x15/0x17 [951.142737] [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp] [951.152725] [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105 [951.163558] [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp] [951.165092] [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre] [951.165092] [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1 [951.177599] [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1 [951.177599] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.177599] [<ffffffff81410996>] ip_local_deliver+0x51/0x55 [951.177599] [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e [951.177599] [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e [951.204898] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.214651] [<ffffffff81410bb5>] ip_rcv+0x21b/0x246 pptp_rcv_core() is a nice example of a function assuming everything it needs is available in skb head. Reported-by: Bradley Peterson <despite@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Updating driver versionYevgeny Petrilin
Driver version updated to 1.5.4.2 Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Adding rxhash supportYevgeny Petrilin
Moving to Toeplitz function in RSS calculation. Reporting rxhash in skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Recording rx queue for gro packetsYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Checksum counters per ringYevgeny Petrilin
Not updating common counters from data path. The checksum counters are per ring, summarizing them when collecting statistics. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Controlling FCS header removalYevgeny Petrilin
Canceling FCS removal where FW allows for better alignment of incoming data. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4: Fix vlan table overflowYevgeny Petrilin
Prevent overflow when trying to register more Vlans then the Vlan table in HW is configured to. Need to take into acount that the first 2 entries are reserved. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added recovery check of CA wake status.Daniel Martensson
Added recovery check of CA wake status in case of wake up timeout. Added check of CA wake status in case of wake down timeout. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Added sanity check for length of CAIF framesDaniel Martensson
Added sanity check for length of CAIF frames, and tear down of CAIF link-layer device upon protocol error. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Make inactivity timeout configurable.Dmitry Tarnyagin
CAIF HSI uses a timer for inactivity. Upon timeout HSI-wake signaling is initiated to allow power-down of the HSI block. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: HSI-Platform device register and unregisters itselfDaniel Martensson
Platform device is no longer removed from caif_hsi at shutdown. The HSI-platform device must do it's own registration and unregistration. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Making read and writes asynchronous.Daniel Martensson
Some platforms do not allow to put HSI block into low-power mode when FIFO is not empty. The patch flushes (by reading) FIFO at wake down sequence. Asynchronous read and write is implemented for that. As a side effect this will also greatly improve performance. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Fix for wakeup condition problemDmitry Tarnyagin
Under stressed conditions a race could happen when del_timer_sync() was called from softirq context at the same time when mod_timer_pending() for the same timer was called from the workqueue. This leaded to a state mismatch in the CAIF HSI driver and following unexpected link wakeup procedure. The fix puts del_timer_sync() and mod_timer_pending() calls under a spin lock to protect against the race condition. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: Fixing a race condition in the caif_hsi codeDmitry Tarnyagin
cfhsi->tx_state was not protected by a spin lock. TX soft-irq could interrupt cfhsi_tx_done_work work leading to inconsistent state of the driver. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19caif-hsi: HSI Fix uninitialized data in HSI headersjur.brandeland@stericsson.com
CAIF HSI header may be uninitialized and cause last message to be repeated if transmit size is ~86 bytes long. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19pptp: fix skb leak in pptp_xmit()Eric Dumazet
In case we cant transmit skb, we must free it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19bonding: use local function pointer of bond->recv_probe in bond_handle_frameMitsuo Hayasaka
The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19smsc911x: Add support for SMSC LAN89218Phil Edworthy
LAN89218 is register compatible with LAN911x. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18tg3: negate USE_PHYLIB flag checkJiri Pirko
USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This results tg3_phy_fini->phy_disconnect is never called and when tg3 module is removed. In my case this resulted in panics in phy_state_machine calling function phydev->adjust_link. So correct this check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18netconsole: enable netconsole can make net_device refcnt incorrentGao feng
There is no check if netconsole is enabled current. so when exec echo 1 > enabled; the reference of net_device will increment always. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18net/phy: extra delay only for RGMII interfaces for IC+ IP 1001Giuseppe CAVALLARO
The extra delay of 2ns to adjust RX clock phase is actually needed in RGMII mode. Tested on the HDK7108 (STx7108c2). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18cs89x0: Move the driver into the Cirrus dirJeff Kirsher
The cs89x0 driver was initial placed in the apple/ when it should have been placed in the cirrus/. This resolves the issue by moving the dirver and fixing up the respective Kconfig(s) and Makefile(s). Thanks to Sascha for reporting the issue. -v2 Fix a config error that was introduced with v1 by removing the dependency on MACE for NET_VENDOR_APPLE. CC: Russell Nelson <nelson@crynwr.com> CC: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18macvlan: handle fragmented multicast framesEric Dumazet
Fragmented multicast frames are delivered to a single macvlan port, because ip defrag logic considers other samples are redundant. Implement a defrag step before trying to send the multicast frame. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller
2011-10-17ixgbe: change the eeprom version reported by ethtoolEmil Tantilov
Use 32bit value starting at offset 0x2d for displaying the firmware version in ethtool. This should work for all current ixgbe HW Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17can: remove references to berlios mailinglistMarc Kleine-Budde
The BerliOS project, which currently hosts our mailinglist, will close with the end of the year. Now take the chance and remove all occurrences of the mailinglist address from the source files. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove unused tcp_end field in send WQAnton Blanchard
The tcp_end field is not actually used by the hardware, so there is no need to set it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add GRO supportAnton Blanchard
Add GRO support to the ehea driver. v3: [cascardo] no need to enable GRO, since it's enabled by default [cascardo] vgrp was removed in the vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove LRO supportAnton Blanchard
In preparation for adding GRO to ehea, remove LRO. v3: [cascardo] fixed conflict with vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add 64bit statisticsAnton Blanchard
Switch to using ndo_get_stats64 to get 64bit statistics. v3: [cascardo] use rtnl_link_stats64 as port stats Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove some unused definitionsAnton Blanchard
The queue macros are many levels deep and it makes it harder to work your way through them when many of the versions are unused. Remove the unused versions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify type 3 transmit routineAnton Blanchard
If a nonlinear skb fits within the immediate area, use skb_copy_bits instead of copying the frags by hand. v3: [cascardo] fixed conflict with use of skb frag API Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Merge swqe2 TSO and non TSO pathsAnton Blanchard
write_swqe2_TSO and write_swqe2_nonTSO are almost identical. For TSO we have to set the TSO and mss bits in the wqe and we only put the header in the immediate area, no data. Collapse both functions into write_swqe2_immediate. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify ehea_xmit2 and ehea_xmit3Anton Blanchard
Based on a patch from Michael Ellerman, clean up a significant portion of the transmit path. There was a lot of duplication here. Even worse, we were always checksumming tx packets and ignoring the skb->ip_summed field. Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why it was enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Allocate large enough skbs to avoid partial cacheline DMA writesAnton Blanchard
The ehea adapter has a mode where it will avoid partial cacheline DMA writes on receive by always padding packets to fall on a cacheline boundary. Unfortunately we currently aren't allocating enough space for a full ethernet MTU packet to be rounded up, so this optimisation doesn't hit. It's unfortunate that the next largest packet size exposed by the hypervisor interface is 2kB, meaning our skb allocation comes out of a 4kB SLAB. However the performance increase due to this optimisation is quite large and my TCP stream numbers increase from 900MB to 1000MB/sec. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add vlan_featuresAnton Blanchard
We weren't enabling any VLAN features so we missed out on checksum offload and TSO when using VLANs. Enable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Dont check NETIF_F_TSO in TX pathAnton Blanchard
It seems like the ehea xmit routine and an ethtool change of TSO mode could race, resulting in corrupt packets. Checking gso_size is enough and we can use the helper function. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove num_tx_qps module optionAnton Blanchard
The num_tx_qps module option allows a user to configure a different number of tx and rx queues. Now the networking stack is multiqueue aware it makes little sense just to enable the tx queues and not the rx queues so remove the option. v3: [cascardo] fixed conflict with get_stats change Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove force_irq logic in napi poll routineAnton Blanchard
commit 18604c548545 (ehea: NAPI multi queue TX/RX path for SMP) added driver specific logic for exiting napi mode. I'm not sure what it was trying to solve and it should be up to the network stack to decide when we are done polling so remove it. v3: [cascardo] Fixed extra parentheses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Update multiqueue supportAnton Blanchard
The ehea driver had some multiqueue support but was missing the last few years of networking stack improvements: - Use skb_record_rx_queue to record which queue an skb came in on. - Remove the driver specific netif_queue lock and use the networking stack transmit lock instead. - Remove the driver specific transmit queue hashing and use skb_get_queue_mapping instead. - Use netif_tx_{start|stop|wake}_queue where appropriate. We can also remove pr->queue_stopped and just check the queue status directly. - Print all 16 queues in the ethtool stats. We now enable multiqueue by default since it is a clear win on all my testing so far. v3: [cascardo] fixed use_mcs parameter description [cascardo] set ehea_ethtool_stats_keys as const Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove NETIF_F_LLTXAnton Blanchard
Remove the deprecated NETIF_F_LLTX feature. Since the network stack now provides the locking we can remove the driver specific pr->xmit_lock. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem
2011-10-17ixgbe: allow eeprom writes via ethtoolEmil Tantilov
Implement support for ethtool -E Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17ixgbe: fix endianess when writing driver version to firmwareEmil Tantilov
This patch makes sure that register writes are in little endian and also converts the reads back to big-endian. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17igb: Check if subordinate VFs are assigned to virtual machinesGreg Rose
Kvm and the Xen pci-back driver will set a flag in the virtual function pci device dev_flags when the VF is assigned to a guest VM. Before destroying subordinate VFs check to see if the flag is set and if so skip the call to pci_disable_sriov() to avoid system crashes. Copy the maintainer for the Xen pci-back driver. Also CC'ing maintainers of all drivers found to call pci_disable_sriov(). V2 - Fix uninitialized variable warning Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: James Smart <james.smart@emulex.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 07:40:27 +0000