aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-01-17ath9k_hw: Fix signal strength / channel noise reportingFelix Fietkau
commit b7c0c238898d200e80487516e2b67aba2a522cc0 upstream. While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor for a chip measured in clean air, it refers to the lowest expected reading. Depending on the frequency, this measurement can vary by about 6db, thus causing a higher reported channel noise and signal strength. Factor in the 6db offset when converting internal noisefloor to channel noise. This patch makes the reported values more accurate for all chips without affecting NF calibration behavior. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath9k: ar9003: fix OTP register offsets for AR9340Gabor Juhos
commit b3cd8021379306c0be6932e4d3b4b01efc681769 upstream. Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Revert "ath9k_hw: Update AR9003 high_power tx gain table"Felix Fietkau
commit 9c170e068636deb3e3f96114034bb711675f0faa upstream. This reverts commit f74b9d365ddd33a375802b064f96a5d0e99af7c0. Turns out reverting commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd "ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to bring the tx power back to normal levels on devices like the Buffalo WZR-HP-G450H, this one needs to be reverted as well. This revert improves tx power by ~10 db on that device Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ath5k: fix tx path skb leaksFelix Fietkau
commit 596ab5ec3bf10a22be30d7cb1d903a4b83fd607c upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11can: Do not call dev_put if restart timer is running upon closeAlexander Stein
commit ab48b03ec9ae1840a1e427e2375bd0d9d554b4ed upstream. If the restart timer is running due to BUS-OFF and the device is disconnected an dev_put will decrease the usage counter to -1 thus blocking the interface removal, resulting in the following dmesg lines repeating every 10s: can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 unregister_netdevice: waiting for can0 to become free. Usage count = -1 Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11p54usb: add USBIDs for two more p54usb devicesChristian Lamparter
commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream. This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11p54usb: add USB ID for T-Com Sinus 154 data IITomasz Guszkowski
commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream. Added USB ID for T-Com Sinus 154 data II. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11rtlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msgJussi Kivilinna
commit 4c3de5920c486b8eefa6187ee6a181864c161100 upstream. Incorrect use of usb_alloc_coherent memory as input buffer to usb_control_msg can cause problems in arch DMA code, for example kernel BUG at 'arch/arm/include/asm/dma-mapping.h:321' on ARM (linux-3.4). Change _usb_writeN_sync use kmalloc'd buffer instead. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11b43: fix tx path skb leaksFelix Fietkau
commit 78f18df4b323d2ac14d6c82e2fc3c8dc4556bccc upstream. ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11b43legacy: Fix firmware loading when driver is built into the kernelLarry Finger
commit 576d28a7c73013717311cfcb514dbcae27c82eeb upstream. Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space times out. The original fix for b43legacy (commit a3ea2c7) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43legacy is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. The remaining firmware files are read synchronously. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb/ipheth: Add iPhone 5 supportJay Purohit
[ Upstream commit af1b85e49089f945deb46258b0fc4bc9910afb22 ] I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11irda: sir_dev: Fix copy/paste typoAlexander Shiyan
[ Upstream commit 2355a62bcbdcc4b567425bab036bfab6ade87eed ] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11ne2000: add the right platform deviceAlan Cox
[ Upstream commit da9da01d9199b5bb15289d0859053c9aa3a34ac0 ] Without this udev doesn't have a way to key the ne device to the platform device. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11bonding: fix race condition in bonding_store_slaves_activenikolay@redhat.com
[ Upstream commit e196c0e579902f42cf72414461fb034e5a1ffbf7 ] Race between bonding_store_slaves_active() and slave manipulation functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism. NULL pointer dereference is easy to reach. Fixed by acquiring the bond->lock for the slave walk. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11bonding: Bonding driver does not consider the gso_max_size/gso_max_segs ↵Sarveshwar Bandi
setting of slave devices. [ Upstream commit 0e376bd0b791ac6ac6bdb051492df0769c840848 ] Patch sets the lowest gso_max_size and gso_max_segs values of the slave devices during enslave and detach. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-10bnx2x: remove redundant warning logAriel Elior
commit 4a25417c20fac00b3afd58ce27408f964d19e708 upstream. fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03iwlwifi: fix 6000 series channel switch commandJohannes Berg
commit 8f7b8db6e0557c8437adf9371e020cd89a7e85dc upstream. The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx()Stanislav Yakovlev
commit bf11315eeda510ea4fc1a2bf972d8155d31d89b4 upstream. The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [<c152f90f>] error_code+0x67/0x6c [67607.676067] [<c142f831>] ? skb_put+0x91/0xa0 [67607.676067] [<f8cf5e5b>] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf5e5b>] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf899b>] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [<f8741c5a>] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [<c143d3e8>] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03ixgbe: add support for X540-AT1joshua.a.hay@intel.com
commit df376f0de167754da9b3ece4afdb5bb8bf3fbf3e upstream. This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Abdallah Chatila <Abdallah.Chatila@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03can: peak_usb: fix hwtstamp assignmentOliver Hartkopp
commit c9faaa09e2a1335678f09c70a0d0eda095564bab upstream. The skb->tstamp is set to the hardware timestamp when available in the USB urb message. This leads to user visible timestamps which contain the 'uptime' of the USB adapter - and not the usual system generated timestamp. Fix this wrong assignment by applying the available hardware timestamp to the skb_shared_hwtstamps data structure - which is intended for this purpose. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03mwifiex: fix system hang issue in cmd timeout error caseBing Zhao
commit b1a47aa5e1e159e2cb06d7dfcc17ef5149b09299 upstream. Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Reported-by: Tim Shepard <shep@laptop.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03mwifiex: report error to MMC core if we cannot suspendBing Zhao
commit dd321acddc3be1371263b8c9e6c6f2af89f63d57 upstream. When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03rtlwifi: rtl8192cu: Add new USB IDAlbert Pool
commit a485e827f07bfdd0762059386e6e787bed6e81ee upstream. This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by: Albert Pool <albertpool@solcon.nl> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03rtlwifi: rtl8192se: Fix gcc 4.7.x warningLarry Finger
commit f761b6947dde42890beea59b020e1be87491809e upstream. With gcc 4.7.x, the following warning is issued as the routine that sets the array has the possibility of not initializing the values: CC [M] drivers/net/wireless/rtlwifi/rtl8192se/phy.o drivers/net/wireless/rtlwifi/rtl8192se/phy.c: In function ‘rtl92s_phy_set_txpower’: drivers/net/wireless/rtlwifi/rtl8192se/phy.c:1268:23: warning: ‘ofdmpowerLevel[0]’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26sky2: Fix for interrupt handlerMirko Lindner
commit d663d181b9e92d80c2455e460e932d34e7a2a7ae upstream. Re-enable interrupts if it is not our interrupt Signed-off-by: Mirko Lindner <mlindner@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26r8169: allow multicast packets on sub-8168f chipset.Nathan Walp
commit 0481776b7a70f09acf7d9d97c288c3a8403fbfe4 upstream. RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp <faceprint@faceprint.com> Suggested-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26r8169: Fix WoL on RTL8168d/8111d.Cyril Brulebois
commit b00e69dee4ccbb3a19989e3d4f1385bc2e3406cd upstream. This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Hinted-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26r8169: use unlimited DMA burst for TXMichal Schmidt
commit aee77e4accbeb2c86b1d294cd84fec4a12dde3bd upstream. The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_freePeter Senna Tschudin
[ Upstream commit 57c10b61c84bfed68b1b317d6f507a392724b9c4 ] Based on commit b27393aecf66199f5ddad37c302d3e0cfadbe6c0 Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17net: usb: Fix memory leak on Tx data pathHemant Kumar
[ Upstream commit 39707c2a3ba5011038b363f84d37c8a98d2d9db1 ] Driver anchors the tx urbs and defers the urb submission if a transmit request comes when the interface is suspended. Anchoring urb increments the urb reference count. These deferred urbs are later accessed by calling usb_get_from_anchor() for submission during interface resume. usb_get_from_anchor() unanchors the urb but urb reference count remains same. This causes the urb reference count to remain non-zero after usb_free_urb() gets called and urb never gets freed. Hence call usb_put_urb() after anchoring the urb to properly balance the reference count for these deferred urbs. Also, unanchor these deferred urbs during disconnect, to free them up. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17rt2800: validate step value for temperature compensationStanislaw Gruszka
commit bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 upstream. Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ath9k: Test for TID only in BlockAcks while checking tx statusSven Eckelmann
commit 6fe7cc71bbf3a0bc28c9cec3c00bc11e81344412 upstream. The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case only one frame is currently available. The client will then answer using a normal Ack instead of a BlockAck. This acknowledgement has no TID stored and therefore the hardware is not able to provide us the corresponding TID. The TID set by the hardware in the tx status descriptor has to be seen as undefined and not as a valid TID value for normal acknowledgements. Doing otherwise results in a massive amount of retransmissions and stalls of connections. Users may experience low bandwidth and complete connection stalls in environments with transfers using multiple TIDs. This regression was introduced in b11b160defc48e4daa283f785192ea3a23a51f8e ("ath9k: validate the TID in the tx status information"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-17ath9k: fix stale pointers potentially causing access to free'd skbsFelix Fietkau
commit 8c6e30936a7893a85f6222084f0f26aceb81137a upstream. bf->bf_next is only while buffers are chained as part of an A-MPDU in the tx queue. When a tid queue is flushed (e.g. on tearing down an aggregation session), frames can be enqueued again as normal transmission, without bf_next being cleared. This can lead to the old pointer being dereferenced again later. This patch might fix crashes and "Failed to stop TX DMA!" messages. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-05b43: Fix oops on unload when firmware not foundLarry Finger
commit f89ff6441df06abc2d95f3ef67525923032d6283 upstream. When b43 fails to find firmware when loaded, a subsequent unload will oops due to calling ieee80211_unregister_hw() when the corresponding register call was never made. Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem for b43legacy. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Markus Kanet <dvmailing@gmx.eu> Cc: Markus Kanet <dvmailing@gmx.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"Felix Fietkau
commit 73b26df5fa1a6245d6fc982362518b620bc7c2fe upstream. This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd. This commit is reducing tx power by at least 10 db on some devices, e.g. the Buffalo WZR-HP-G450H. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-28skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboardGraham Gower
[ Upstream commit a2af139ff1cd85df586690ff626619ab1ee88b0a ] Marvell 88E8001 on an ASUS P5NSLI motherboard is unable to send/receive packets on a system with >4gb ram unless a 32bit DMA mask is used. This issue has been around for years and a fix was sent 3.5 years ago, but there was some debate as to whether it should instead be fixed as a PCI quirk. http://www.spinics.net/lists/netdev/msg88670.html However, 18 months later a similar workaround was introduced for another chipset exhibiting the same problem. http://www.spinics.net/lists/netdev/msg142287.html Signed-off-by: Graham Gower <graham.gower@gmail.com> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21e1000e: Change wthresh to 1 to avoid possible Tx stallsHiroaki SHIMODA
commit 8edc0e624db3756783233e464879eb2e3b904c13 upstream. This patch originated from Hiroaki SHIMODA but has been modified by Intel with some minor cleanups and additional commit log text. Denys Fedoryshchenko and others reported Tx stalls on e1000e with BQL enabled. Issue was root caused to hardware delays. They were introduced because some of the e1000e hardware with transmit writeback bursting enabled, waits until the driver does an explict flush OR there are WTHRESH descriptors to write back. Sometimes the delays in question were on the order of seconds, causing visible lag for ssh sessions and unacceptable tx completion latency, especially for BQL enabled kernels. To avoid possible Tx stalls, change WTHRESH back to 1. The current plan is to investigate a method for re-enabling WTHRESH while not harming BQL, but those patches will be later for net-next if they work. please enqueue for stable since v3.3 as this bug was introduced in commit 3f0cfa3bc11e7f00c9994e0f469cbc0e7da7b00c Author: Tom Herbert <therbert@google.com> Date: Mon Nov 28 16:33:16 2011 +0000 e1000e: Support for byte queue limits Changes to e1000e to use byte queue limits. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> CC: eric.dumazet@gmail.com CC: therbert@google.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21ath9k: use ieee80211_free_txskbFelix Fietkau
commit 249ee72249140fe5b9adc988f97298f0aa5db2fc upstream. Using ieee80211_free_txskb for tx frames is required, since mac80211 clones skbs for which socket tx status is requested. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13r8169: 8168c and later require bit 0x20 to be set in Config2 for PME signaling.Francois Romieu
commit d387b427c973974dd619a33549c070ac5d0e089f upstream. The new 84xx stopped flying below the radars. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13r8169: Config1 is read-only on 8168c and later.Francois Romieu
commit 851e60221926a53344b4227879858bef841b0477 upstream. Suggested by Hayes. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13pppoe: drop PPPOX_ZOMBIEs in pppoe_releaseXiaodong Xu
[ Upstream commit 2b018d57ff18e5405823e5cb59651a5b4d946d7b ] When PPPOE is running over a virtual ethernet interface (e.g., a bonding interface) and the user tries to delete the interface in case the PPPOE state is ZOMBIE, the kernel will loop forever while unregistering net_device for the reference count is not decreased to zero which should have been done with dev_put(). Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13sierra_net: Endianess bug fix.Lennart Sorensen
[ Upstream commit 2120c52da6fe741454a60644018ad2a6abd957ac ] I discovered I couldn't get sierra_net to work on a powerpc. Turns out the firmware attribute check assumes the system is little endian and hence fails because the attributes is a 16 bit value. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13netxen: check for root bus in netxen_mask_aer_correctableNikolay Aleksandrov
[ Upstream commit e4d1aa40e363ed3e0486aeeeb0d173f7f822737e ] Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13ixp4xx_hss: fix build failure due to missing linux/module.h inclusionFlorian Fainelli
[ Upstream commit 0b836ddde177bdd5790ade83772860940bd481ea ] Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h: dont include module.h from other includes) made the following build error on ixp4xx_hss pop up: CC [M] drivers/net/wan/ixp4xx_hss.o drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' before string constant make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 This was previously hidden because ixp4xx_hss includes linux/hdlc.h which includes linux/netdevice.h which includes linux/netprio_cgroup.h which used to include linux/module.h. The real issue was actually present since the initial commit that added this driver since it uses macros from linux/module.h without including this file. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13net: ethernet: davinci_cpdma: decrease the desc count when cleaning up the ↵htbegin
remaining packets [ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ] chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by: Tao Hou <hotforest@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13bnx2x: fix rx checksum validation for IPv6Michal Schmidt
[ Upstream commit e488921f44765e8ab6c48ca35e3f6b78df9819df ] Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-13rapidio/rionet: fix multicast packet transmit logicAlexandre Bounine
commit 7c4a6106d6451fc03c491e61df37c044505d843a upstream. Fix multicast packet transmit logic to account for repetitive transmission of single skb: - correct check for available buffers (this bug may produce NULL pointer crash dump in case of heavy traffic); - update skb user count (incorrect user counter causes a warning dump from net_tx_action routine during multicast transfers in systems with three or more rionet participants). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-07can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()Wei Yongjun
commit f61bd0585dfc7d99db4936d7467de4ca8e2f7ea0 upstream. In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-07ath9k: Disable ASPM only for AR9285Sujith Manoharan
commit 046b6802c8d3c8a57448485513bf7291633e0fa3 upstream. Currently, ASPM is disabled for all WLAN+BT combo chipsets when BTCOEX is enabled. This is incorrect since the workaround is required only for WB195, which is a AR9285+AR3011 combo solution. Fix this by checking for the HW version when enabling the workaround. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Tested-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-07b43legacy: Fix crash on unload when firmware not availableLarry Finger
commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 upstream. When b43legacy is loaded without the firmware being available, a following unload generates a kernel NULL pointer dereference BUG as follows: [ 214.330789] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 214.330997] IP: [<c104c395>] drain_workqueue+0x15/0x170 [ 214.331179] *pde = 00000000 [ 214.331311] Oops: 0000 [#1] SMP [ 214.331471] Modules linked in: b43legacy(-) ssb pcmcia mac80211 cfg80211 af_packet mperf arc4 ppdev sr_mod cdrom sg shpchp yenta_socket pcmcia_rsrc pci_hotplug pcmcia_core battery parport_pc parport floppy container ac button edd autofs4 ohci_hcd ehci_hcd usbcore usb_common thermal processor scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_dh fan thermal_sys hwmon ata_generic pata_ali libata [last unloaded: cfg80211] [ 214.333421] Pid: 3639, comm: modprobe Not tainted 3.6.0-rc6-wl+ #163 Source Technology VIC 9921/ALI Based Notebook [ 214.333580] EIP: 0060:[<c104c395>] EFLAGS: 00010246 CPU: 0 [ 214.333687] EIP is at drain_workqueue+0x15/0x170 [ 214.333788] EAX: c162ac40 EBX: cdfb8360 ECX: 0000002a EDX: 00002a2a [ 214.333890] ESI: 00000000 EDI: 00000000 EBP: cd767e7c ESP: cd767e5c [ 214.333957] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 214.333957] CR0: 8005003b CR2: 0000004c CR3: 0c96a000 CR4: 00000090 [ 214.333957] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 214.333957] DR6: ffff0ff0 DR7: 00000400 [ 214.333957] Process modprobe (pid: 3639, ti=cd766000 task=cf802e90 task.ti=cd766000) [ 214.333957] Stack: [ 214.333957] 00000292 cd767e74 c12c5e09 00000296 00000296 cdfb8360 cdfb9220 00000000 [ 214.333957] cd767e90 c104c4fd cdfb8360 cdfb9220 cd682800 cd767ea4 d0c10184 cd682800 [ 214.333957] cd767ea4 cba31064 cd767eb8 d0867908 cba31064 d087e09c cd96f034 cd767ec4 [ 214.333957] Call Trace: [ 214.333957] [<c12c5e09>] ? skb_dequeue+0x49/0x60 [ 214.333957] [<c104c4fd>] destroy_workqueue+0xd/0x150 [ 214.333957] [<d0c10184>] ieee80211_unregister_hw+0xc4/0x100 [mac80211] [ 214.333957] [<d0867908>] b43legacy_remove+0x78/0x80 [b43legacy] [ 214.333957] [<d083654d>] ssb_device_remove+0x1d/0x30 [ssb] [ 214.333957] [<c126f15a>] __device_release_driver+0x5a/0xb0 [ 214.333957] [<c126fb07>] driver_detach+0x87/0x90 [ 214.333957] [<c126ef4c>] bus_remove_driver+0x6c/0xe0 [ 214.333957] [<c1270120>] driver_unregister+0x40/0x70 [ 214.333957] [<d083686b>] ssb_driver_unregister+0xb/0x10 [ssb] [ 214.333957] [<d087c488>] b43legacy_exit+0xd/0xf [b43legacy] [ 214.333957] [<c1089dde>] sys_delete_module+0x14e/0x2b0 [ 214.333957] [<c110a4a7>] ? vfs_write+0xf7/0x150 [ 214.333957] [<c1240050>] ? tty_write_lock+0x50/0x50 [ 214.333957] [<c110a6f8>] ? sys_write+0x38/0x70 [ 214.333957] [<c1397c55>] syscall_call+0x7/0xb [ 214.333957] Code: bc 27 00 00 00 00 a1 74 61 56 c1 55 89 e5 e8 a3 fc ff ff 5d c3 90 55 89 e5 57 56 89 c6 53 b8 40 ac 62 c1 83 ec 14 e8 bb b7 34 00 <8b> 46 4c 8d 50 01 85 c0 89 56 4c 75 03 83 0e 40 80 05 40 ac 62 [ 214.333957] EIP: [<c104c395>] drain_workqueue+0x15/0x170 SS:ESP 0068:cd767e5c [ 214.333957] CR2: 000000000000004c [ 214.341110] ---[ end trace c7e90ec026d875a6 ]---Index: wireless-testing/drivers/net/wireless/b43legacy/main.c The problem is fixed by making certain that the ucode pointer is not NULL before deregistering the driver in mac80211. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-24 06:42:00 +0000