aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-04-08rt2x00: use rt2800_config_channel_rt3x for rt2872Helmut Schaa
rt2872 needs the same rf register setup as rt3070 and rt3090, hence use rt2800_config_channel_rt3x instead of rt2800_config_channel_rt2x. This change allows me to actually switch channels and hence scan all configured channels on the RT305x SoC platform (which uses a rt2872) here. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k: simplify AR9220 fixup code for AR_AN_TOP2 registerPavel Roskin
Don't modify ah->iniModes, it's supposed to be constant. Instead, apply the fixup when the data is written to the registers. Change ath9k_hw_init_eeprom_fix() to only determine whether the fixup is needed. This allows similteneous support for AR9220 cards that need AR_AN_TOP2 fixup (such as Ubiquiti SR71-12) and those that don't need it (D-Link DWA-552 rev A2). Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix HTC layer memleakSujith
Messages that are generated by the HTC layer don't have any TX callback endpoints assigned to them. Consequently, the allocated SKBs are never freed. Fix this issue by handling this case in the HTC layer itself. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Use anchors for REGOUT pipeSujith
hif_usb_regout_cb() frees the given URB, which is borked by design. Use an anchor to simplify URB management. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix module unloading issueSujith
The maximum number of packets in a single buffer in stream mode is 10. The driver currently uses 8 - which caused stack corruption, in the absence of any kind of OOB checking. Fixing this to the correct value of 10 fixes the module unload issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Fix RX URB reference countSujith
RX URBs are automatically freed when the reference count drops to zero - this currently doesn't happen when usb_kill_anchored_urbs() is called during unload. Fix this by dropping the reference count by one during initial submission. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08ath9k_htc: Protect RX stream variablesSujith
Use a spin lock to prevent concurrent access to variables dealing with RX stream mode handling. Currently, no protection is implemented - which causes problems in RX. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08rt2x00: Enable powersaving by default again on rt2500usb.Gertjan van Wingerde
Now that the powersave issues on rt2500usb have been tackled, powersave can be enabled by default again. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08wireless/ath: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into merge Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/iwlwifi/iwl-tx.c
2010-04-07ath9k_htc: Configure the beacon timers once the scan is completed.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k_htc: Add support for power save.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath9k: Add support for newer AR9285 chipsets.Vivek Natarajan
This patch adds support for a modified newer version of AR9285 chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07wl1251: use DRIVER_NAME macro in wl1251_spi_driverKalle Valo
Better use the macro for consistency, the content is the same anyway. Signed-off-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07ath5k: Adaptive Noise Immunity (ANI) ImplementationBruno Randolf
This is an Adaptive Noise Imunity (ANI) implementation for ath5k. I have looked at both ath9k and HAL sources (they are nearly the same), and even though i have implemented some things differently, the basic algorithm is practically the same, for now. I hope that this can serve as a clean start to improve the algorithm later. This also adds a possibility to manually control ANI settings, right now only thru a debugfs file: * set lowest sensitivity (=highest noise immunity): echo sens-low > /sys/kernel/debug/ath5k/phy0/ani * set highest sensitivity (=lowest noise immunity): echo sens-high > /sys/kernel/debug/ath5k/phy0/ani * automatically control immunity (default): echo ani-on > /sys/kernel/debug/ath5k/phy0/ani * to see the parameters in use and watch them change: cat /sys/kernel/debug/ath5k/phy0/ani Manually setting sensitivity will turn the automatic control off. You can also control each of the five immunity parameters (noise immunity, spur immunity, firstep, ofdm weak signal detection, cck weak signal detection) manually thru the debugfs file. This is tested on AR5414 and nearly doubles the thruput in a noisy 2GHz band. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06b43: N-PHY: fix copy&paste typoRafał Miłecki
Reported-by: Myhailo Danylenko <isbear@ukrpost.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix tx queue flushingJuuso Oikarinen
This patch modifies tx-queue flushing to correspond with tx-path - i.e. also frames for which no ack was requested are forwarded to the mac80211 for disposal. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix debug prints for beacon-loss and psm-entry-fail scenariosJuuso Oikarinen
Remove ERROR print from psm-entry-fail scenario, instead use an INFO print. Also, add INFO print to the beacon-loss scenario. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Configure a higher listen interval to AP upon associationJuuso Oikarinen
Increase the fixed listen-interval max value configured to the mac80211 on driver init. This value will allow a larger value to be configured to the AP, which means the AP will buffer our frames longer. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Configure rates for templatesJuuso Oikarinen
Configure meaningful rates to be used with the templates. For control frames, use the determined basic rates (currently the lowest rate for the band) and for data-frames (null-funcs) let the firmware use the current rate policy to determine the rate. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Use minimum rate for each band for control messagesJuuso Oikarinen
Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: Fix keep-alive related command errorJuuso Oikarinen
The firmware does not like the host configuring the keep-alive after it has been once configured after a join-operation. Instead, it will complain about invalid parameters, which do not break functionality, but do not look nice in the syslog either. This patch prevents the complaints by only configuring the keep-alive once for an association, after the first time join is performed with the correct bssid. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: added missing command header in wl1271_cmd_disconnectLuciano Coelho
The command header was missing in the wl1271_cmd_disconnect structure. It was working fine by sheer luck, because the parameters are not critical and because our wl1271_cmd_send() function was overwriting the rx_config_options with the actual header. This patch adds the header to the command structure. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06wl1271: fix sdio driver name in wl1271_sdio_driverLuciano Coelho
Our SPI driver is called "wl1271_spi" in the driver information structure. Let's use the same for SDIO so that things are aligned. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k_htc: Add TL-WN422G v2 product IDSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k_hw: Don't check devid for ath9k_htcSujith
For USB devices, this check is invalid. Remove the check so that new product IDs can be added. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath: Add a bus type fieldSujith
This can be used to store the bus types ( AHB/PCI/USB ). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: fix compile error without debug enabledFelix Fietkau
commits 8e6f5aa250d6013ec0d66f9f45f376678d3fc4ab and db1a052b73f7c97f9e8b21f3f19a92313ed2acb1 accidentally introduced compile errors that happens when ath9k debug is not enabled. This patch fixes the declaration of the inline stubs to resolve this. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: remove ah->mask_reg, it's never used properlyPavel Roskin
ah->mask_reg was used to hold different data throughout the driver. ath9k_hw_init_interrupt_masks() used it to save the value written to AR_IMR. ath9k_hw_set_interrupts() used it to hold the interrupt mask as defined in enum ath9k_int. Those masks differ in many bits. Use ah->imask instead of ah->mask_reg in ath9k_hw_set_interrupts() and ath9k_hw_updatetxtriglevel(). That's what the code was meant to do. ah->imask is initialized in ath9k_start(), so we don't need to initialize it from ah->mask_reg. Once it's done, ah->mask_reg becomes write-only, so it's replaced with a local variable in ath9k_hw_init_interrupt_masks(). Signed-off-by: Pavel Roskin <proski@gnu.org> Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: move imask from sc to ahPavel Roskin
Add ah variable in the functions that didn't have it and used sc->imask. Replace sc->sc_ah with ah in those functions. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: rename symbols in enum ath9k_internal_frame_type to avoid confusionPavel Roskin
Symbols starting with "ATH9K_INT" are also used for interrupt mask. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath: fix coding style/readability in ath/ar9170Luis de Bethencourt
This is a patch to files in ath/ar9170 that fixes a set of warnings found by checkpatch.pl tool. A line over 80 characters, a few empty spaces before tab and a few empty characters before a new line. Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06rt2x00: Add wakeup interrupt handler to rt2800pci.Gertjan van Wingerde
This is needed to wake up the device automatically for receiving beacons, and is required for proper powersave handling. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06rt2x00: Add wakeup interrupt handler to rt61pci.Gertjan van Wingerde
This is needed to wake up the device automatically for receiving beacons, and is required for proper powersave handling. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06rt2x00: Disable auto wakeup before waking up device.Gertjan van Wingerde
In all drivers ensure that auto wakeup is disabled before waking up the device. This is needed to prevent connection stability issues and problems in waking up the device. Based upon a patch from Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06libertas/sdio: 8686: set ECSI bit for 1-bit transfersDaniel Mack
When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line. However, the 8686 will only drive this line when the ECSI bit is set in the CCCR_IF register. Thanks to Alagu Sankar for pointing me in the right direction. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alagu Sankar <alagusankar@embwise.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Dan Williams <dcbw@redhat.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Bing Zhao <bzhao@marvell.com> Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: linux-mmc@vger.kernel.org Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath: fix code readability in regd.cLuis de Bethencourt
This is a patch to the ath/regd.c file that fixes two code readability issues. A space between to separate two defines and the indentation inside the ath_redg_is_eeprom_valid function. Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06Net: wireless: ath: fix macros coding style issue in hw.cLuis de Bethencourt
This is a patch to the ath/hw.c file that fixes up a warning about macros found by the checkpatch.pl tool, that said that complex values should be enclosed in parenthesis. Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-04-06ath9k: fix double calls to ath_radio_enableFelix Fietkau
With the enable_radio being uninitialized, ath_radio_enable() might be called twice, which can leave some hardware in an undefined state. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-03rt2x00: remove MCU requests for SoC platformsLuis Correia
The ralink SoC platforms do not have an MCU. Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
2010-04-02iwlwifi: remove trailing space in messagesFrans Pop
Includes minor improvements in debugging messages in iwl-4965.c, function iwl4965_is_temp_calib_needed(). Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: code cleanup for generic definesWey-Yi Guy
Some defines used by all agn devices, but the definitions were in iwl-4965-hw.h, move those to iwl-agn-hw.h which is the better place for those. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: clear rxq->queue in queue resetZhu Yi
In iwl_rx_queue_reset(), we didn't clear the rxq->queue[]. This might cause the same rxb appears on multiple places in rxq->queue. Although this won't cause any problem because of the read and write pointers protection in rxq, we'd better clear it to avoid misleading. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: remove irrelevant commentsWey-Yi Guy
Removing irrelevant comments from iwl-agn.c Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: merge module parameters into single placeWey-Yi Guy
Module parameters used to be defined in both iwl-5000.c and iwl-4965.c, after the code re-structure, merge into iwl-agn.c for easy to read and maintenance. Number of module parameters are deprecated after this merge. These are also scheduled for removal by 2.6.40. The current supported parameters are: parm: debug50:50XX debug output mask (deprecated) (uint) parm: debug:debug output mask (uint) parm: swcrypto50:using crypto in software (default 0 [hardware]) (deprecated) (bool) parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: queues_num50:number of hw queues in 50xx series (deprecated) (int) parm: queues_num:number of hw queues. (int) parm: 11n_disable50:disable 50XX 11n functionality (deprecated) (int) parm: 11n_disable:disable 11n functionality (int) parm: amsdu_size_8K50:enable 8K amsdu size in 50XX series (deprecated) (int) parm: amsdu_size_8K:enable 8K amsdu size (int) parm: fw_restart50:restart firmware in case of error (deprecated) (int) parm: fw_restart:restart firmware in case of error (int) parm: disable_hw_scan:disable hardware scanning (default 0) (int) Remove "antenna" module parameter, it is not being used in "agn" driver. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: avoid Tx queue memory allocation in interface downZhu Yi
We used to free all the Tx queues memory when interface is brought down and reallocate them again in interface up. This requires order-4 allocation for txq->cmd[]. In situations like s2ram, this usually leads to allocation failure in the memory subsystem. The patch fixed this problem by allocating the Tx queues memory only at the first time. Later iwl_down/iwl_up only initialize but don't free and reallocate them. The memory is freed at the device removal time. BTW, we have already done this for the Rx queue. This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15551 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: use consistent table for tx data collectShanyu Zhao
When collecting tx data for non-aggregation packets in rate scaling, if the tx data matches "other table", it still uses current table to update the stats and calculate average throughput in function rs_collect_tx_data(). This can mess up the rate scaling data structure and cause a kernel panic in a BUG_ON statement in rs_rate_scale_perform(). To fix this bug, we pass table pointer instead of window pointer (pointed to by table pointer) to function rs_collect_tx_data() so that the table being used is consistent. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Henry Zhang <hongx.c.zhang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02iwlwifi: fix DMA allocation warningsZhu Yi
Below warning is triggered sometimes at module removal time when CONFIG_DMA_API_DEBUG is enabled. This should be caused by we didn't unmap pending commands (enqueued, but no complete notification received) for the Tx command queue. [ 1583.107469] ------------[ cut here ]------------ [ 1583.107539] WARNING: at lib/dma-debug.c:688 dma_debug_device_change+0x13c/0x180() [ 1583.107617] Hardware name: ... [ 1583.107664] pci 0000:04:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] [ 1583.107713] Modules linked in: ... [ 1583.111661] Pid: 16970, comm: modprobe Tainted: G W 2.6.34-rc1-wl #33 [ 1583.111727] Call Trace: [ 1583.111779] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111833] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.111908] [<c0138e11>] warn_slowpath_common+0x71/0xd0 [ 1583.111963] [<c02a281c>] ? dma_debug_device_change+0x13c/0x180 [ 1583.112016] [<c0138ebb>] warn_slowpath_fmt+0x2b/0x30 [ 1583.112086] [<c02a281c>] dma_debug_device_change+0x13c/0x180 [ 1583.112142] [<c03e6c33>] notifier_call_chain+0x53/0x90 [ 1583.112198] [<c03e1ebe>] ? down_read+0x6e/0x90 [ 1583.112271] [<c015b229>] __blocking_notifier_call_chain+0x49/0x70 [ 1583.112326] [<c015b26f>] blocking_notifier_call_chain+0x1f/0x30 [ 1583.112380] [<c031931c>] __device_release_driver+0x8c/0xa0 [ 1583.112451] [<c03193bf>] driver_detach+0x8f/0xa0 [ 1583.112538] [<c0318382>] bus_remove_driver+0x82/0x100 [ 1583.112595] [<c0319ad9>] driver_unregister+0x49/0x80 [ 1583.112671] [<c024feb2>] ? sysfs_remove_file+0x12/0x20 [ 1583.112727] [<c02aa292>] pci_unregister_driver+0x32/0x80 [ 1583.112791] [<fc13a3c1>] iwl_exit+0x12/0x19 [iwlagn] [ 1583.112848] [<c017940a>] sys_delete_module+0x15a/0x210 [ 1583.112870] [<c015a5db>] ? up_read+0x1b/0x30 [ 1583.112893] [<c029600c>] ? trace_hardirqs_off_thunk+0xc/0x10 [ 1583.112924] [<c0295ffc>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 1583.112947] [<c03e6a1f>] ? do_page_fault+0x1ff/0x3c0 [ 1583.112978] [<c03e36f6>] ? restore_all_notrace+0x0/0x18 [ 1583.113002] [<c016aa70>] ? trace_hardirqs_on_caller+0x20/0x190 [ 1583.113025] [<c0102d58>] sysenter_do_call+0x12/0x38 [ 1583.113054] ---[ end trace fc23e059cc4c2ced ]--- Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-31wireless/ipw2x00: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-29 10:31:53 +0000