aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-06-16slcan: Port write_wakeup deadlock fix from slipTyler Hall
The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-16slip: Fix deadlock in write_wakeupTyler Hall
Use schedule_work() to avoid potentially taking the spinlock in interrupt context. Commit cc9fa74e2a ("slip/slcan: added locking in wakeup function") added necessary locking to the wakeup function and 367525c8c2/ddcde142be ("can: slcan: Fix spinlock variant") converted it to spin_lock_bh() because the lock is also taken in timers. Disabling softirqs is not sufficient, however, as tty drivers may call write_wakeup from interrupt context. This driver calls tty->ops->write() with its spinlock held, which may immediately cause an interrupt on the same CPU and subsequent spin_bug(). Simply converting to spin_lock_irq/irqsave() prevents this deadlock, but causes lockdep to point out a possible circular locking dependency between these locks: (&(&sl->lock)->rlock){-.....}, at: slip_write_wakeup (&port_lock_key){-.....}, at: serial8250_handle_irq.part.13 The slip transmit is holding the slip spinlock when calling the tty write. This grabs the port lock. On an interrupt, the handler grabs the port lock and calls write_wakeup which grabs the slip lock. This could be a problem if a serial interrupt occurs on another CPU during the slip transmit. To deal with these issues, don't grab the lock in the wakeup function by deferring the writeout to a workqueue. Also hold the lock during close when de-assigning the tty pointer to safely disarm the worker and timers. This bug is easily reproducible on the first transmit when slip is used with the standard 8250 serial driver. [<c0410b7c>] (spin_bug+0x0/0x38) from [<c006109c>] (do_raw_spin_lock+0x60/0x1d0) r5:eab27000 r4:ec02754c [<c006103c>] (do_raw_spin_lock+0x0/0x1d0) from [<c04185c0>] (_raw_spin_lock+0x28/0x2c) r10:0000001f r9:eabb814c r8:eabb8140 r7:40070193 r6:ec02754c r5:eab27000 r4:ec02754c r3:00000000 [<c0418598>] (_raw_spin_lock+0x0/0x2c) from [<bf3a0220>] (slip_write_wakeup+0x50/0xe0 [slip]) r4:ec027540 r3:00000003 [<bf3a01d0>] (slip_write_wakeup+0x0/0xe0 [slip]) from [<c026e420>] (tty_wakeup+0x48/0x68) r6:00000000 r5:ea80c480 r4:eab27000 r3:bf3a01d0 [<c026e3d8>] (tty_wakeup+0x0/0x68) from [<c028a8ec>] (uart_write_wakeup+0x2c/0x30) r5:ed68ea90 r4:c06790d8 [<c028a8c0>] (uart_write_wakeup+0x0/0x30) from [<c028dc44>] (serial8250_tx_chars+0x114/0x170) [<c028db30>] (serial8250_tx_chars+0x0/0x170) from [<c028dffc>] (serial8250_handle_irq+0xa0/0xbc) r6:000000c2 r5:00000060 r4:c06790d8 r3:00000000 [<c028df5c>] (serial8250_handle_irq+0x0/0xbc) from [<c02933a4>] (dw8250_handle_irq+0x38/0x64) r7:00000000 r6:edd2f390 r5:000000c2 r4:c06790d8 [<c029336c>] (dw8250_handle_irq+0x0/0x64) from [<c028d2f4>] (serial8250_interrupt+0x44/0xc4) r6:00000000 r5:00000000 r4:c06791c4 r3:c029336c [<c028d2b0>] (serial8250_interrupt+0x0/0xc4) from [<c0067fe4>] (handle_irq_event_percpu+0xb4/0x2b0) r10:c06790d8 r9:eab27000 r8:00000000 r7:00000000 r6:0000001f r5:edd52980 r4:ec53b6c0 r3:c028d2b0 [<c0067f30>] (handle_irq_event_percpu+0x0/0x2b0) from [<c006822c>] (handle_irq_event+0x4c/0x6c) r10:c06790d8 r9:eab27000 r8:c0673ae0 r7:c05c2020 r6:ec53b6c0 r5:edd529d4 r4:edd52980 [<c00681e0>] (handle_irq_event+0x0/0x6c) from [<c006b140>] (handle_level_irq+0xe8/0x100) r6:00000000 r5:edd529d4 r4:edd52980 r3:00022000 [<c006b058>] (handle_level_irq+0x0/0x100) from [<c00676f8>] (generic_handle_irq+0x30/0x40) r5:0000001f r4:0000001f [<c00676c8>] (generic_handle_irq+0x0/0x40) from [<c000f57c>] (handle_IRQ+0xd0/0x13c) r4:ea997b18 r3:000000e0 [<c000f4ac>] (handle_IRQ+0x0/0x13c) from [<c00086c4>] (armada_370_xp_handle_irq+0x4c/0x118) r8:000003ff r7:ea997b18 r6:ffffffff r5:60070013 r4:c0674dc0 [<c0008678>] (armada_370_xp_handle_irq+0x0/0x118) from [<c0013840>] (__irq_svc+0x40/0x70) Exception stack(0xea997b18 to 0xea997b60) 7b00: 00000001 20070013 7b20: 00000000 0000000b 20070013 eab27000 20070013 00000000 ed10103e eab27000 7b40: c06790d8 ea997b74 ea997b60 ea997b60 c04186c0 c04186c8 60070013 ffffffff r9:eab27000 r8:ed10103e r7:ea997b4c r6:ffffffff r5:60070013 r4:c04186c8 [<c04186a4>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<c0288fc0>] (uart_start+0x40/0x44) r4:c06790d8 r3:c028ddd8 [<c0288f80>] (uart_start+0x0/0x44) from [<c028982c>] (uart_write+0xe4/0xf4) r6:0000003e r5:00000000 r4:ed68ea90 r3:0000003e [<c0289748>] (uart_write+0x0/0xf4) from [<bf3a0d20>] (sl_xmit+0x1c4/0x228 [slip]) r10:ed388e60 r9:0000003c r8:ffffffdd r7:0000003e r6:ec02754c r5:ea717eb8 r4:ec027000 [<bf3a0b5c>] (sl_xmit+0x0/0x228 [slip]) from [<c0368d74>] (dev_hard_start_xmit+0x39c/0x6d0) r8:eaf163c0 r7:ec027000 r6:ea717eb8 r5:00000000 r4:00000000 Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-16vmxnet3: adjust ring sizes when interface is downNeil Horman
If ethtool is used to update ring sizes on a vmxnet3 interface that isn't running, the change isn't stored, meaning the ring update is effectively is ignored and lost without any indication to the user. Other network drivers store the ring size update so that ring allocation uses the new sizes next time the interface is brought up. This patch modifies vmxnet3 to behave this way as well Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-16b43: fix typo in Kconfig (make B43_BUSES_BCMA_AND_SSB the default for real)Rafał Miłecki
Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16rt2x00: disable TKIP on USBStanislaw Gruszka
On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Cc: stable@vger.kernel.org Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16mwifiex: fix tx_info/rx_info overlap with PCIe dma_mappingChin-Ran Lo
On PCIe Tx data path, network interface specific tx_info parameters such as bss_num and bss_type are saved at "skb->cb + sizeof(dma_addr_t)" (returned by MWIFIEX_SKB_TXCB). Later mwifiex_map_pci_memory() called from mwifiex_pcie_send_data() will memcpy sizeof(struct mwifiex_dma_mapping) bytes to save PCIe DMA address and length information at beginning of skb->cb. This accidently overwrites bss_num and bss_type saved in skb->cb previously because bss_num/bss_type and mwifiex_dma_mapping data overlap. Similarly, on PCIe Rx data path, rx_info parameters overlaps with PCIe DMA address and length information too. Fix it by defining mwifiex_cb structure and having MWIFIEX_SKB_TXCB and MWIFIEX_SKB_RXCB return the correct address of tx_info/rx_info using the structure members. Also add a BUILD_BUG_ON to maks sure that mwifiex_cb structure doesn't exceed the size of skb->cb. Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: disable 5 GHz on G-PHYRafał Miłecki
This fixes regression introduced by adding some G-PHY devices to the list of dual band devices. There is simply no support for 5 GHz on G-PHY devices in b43. It results in: WARNING: CPU: 0 PID: 79 at drivers/net/wireless/b43/phy_g.c:75 b43_gphy_channel_switch+0x125/0x130 [b43]() b43-phy1 ERROR: PHY init: Channel switch to default failed Regression was introduced by the following commit: commit 773cfc508f4d64c14547ff8751b5cbd473124364 Author: Rafał Miłecki <zajec5@gmail.com> Date: Mon May 19 23:18:55 2014 +0200 b43: add more devices to the bands database Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-15vxlan: Checksum fixesTom Herbert
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-13vxlan: use dev->needed_headroom instead of dev->hard_header_lenCong Wang
When we mirror packets from a vxlan tunnel to other device, the mirror device should see the same packets (that is, without outer header). Because vxlan tunnel sets dev->hard_header_len, tcf_mirred() resets mac header back to outer mac, the mirror device actually sees packets with outer headers Vxlan tunnel should set dev->needed_headroom instead of dev->hard_header_len, like what other ip tunnels do. This fixes the above problem. Cc: "David S. Miller" <davem@davemloft.net> Cc: stephen hemminger <stephen@networkplumber.org> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12net: fec: Add software TSO supportNimrod Andy
Add software TSO support for FEC. This feature allows to improve outbound throughput performance. Tested on imx6dl sabresd board, running iperf tcp tests shows: - 16.2% improvement comparing with FEC SG patch - 82% improvement comparing with NO SG & TSO patch $ ethtool -K eth0 tso on $ iperf -c 10.192.242.167 -t 3 & [ 3] local 10.192.242.108 port 35388 connected with 10.192.242.167 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 181 MBytes 506 Mbits/sec During the testing, CPU loading is 30%. Since imx6dl FEC Bandwidth is limited to SOC system bus bandwidth, the performance with SW TSO is a milestone. CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Li Frank <B20596@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Add Scatter/gather supportNimrod Andy
Add Scatter/gather support for FEC. This feature allows to improve outbound throughput performance. Tested on imx6dl sabresd board: Running iperf tests shows a 55.4% improvement. $ ethtool -K eth0 sg off $ iperf -c 10.192.242.167 -t 3 & [ 3] local 10.192.242.108 port 52618 connected with 10.192.242.167 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 99.5 MBytes 278 Mbits/sec $ ethtool -K eth0 sg on $ iperf -c 10.192.242.167 -t 3 & [ 3] local 10.192.242.108 port 52617 connected with 10.192.242.167 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 154 MBytes 432 Mbits/sec CC: Li Frank <B20596@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Increase buffer descriptor entry numberNimrod Andy
In order to support SG, software TSO, let's increase BD entry number. CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Factorize feature settingNimrod Andy
In order to enhance the code readable, let's factorize the feature list. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Enable IP header hardware checksumNimrod Andy
IP header checksum is calcalated by network layer in default. To support software TSO, it is better to use HW calculate the IP header checksum. FEC hw checksum feature request the checksum field in frame is zero, otherwise the calculative CRC is not correct. For segmentated TCP packet, HW calculate the IP header checksum again, it doesn't bring any impact. For SW TSO, HW calculated checksum bring better performance. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12net: fec: Factorize the .xmit transmit functionNimrod Andy
Make the code more readable and easy to support other features like SG, TSO, moving the common transmit function to one api. And the patch also factorize the getting BD index to it own function. CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12via-rhine: fix full-duplex with autoneg disableFrançois Cachereul
With some specific configuration (VT6105M on Soekris 5510 and depending on the device at the other end), fragmented packets were not transmitted when forcing 100 full-duplex with autoneg disable. This fix now write full-duplex chips register when forcing full or half-duplex not only when autoneg is enable. Signed-off-by: François Cachereul <f.cachereul@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Enlarge the dorq threshold for VFsAriel Elior
A malicious VF might try to starve the other VFs & PF by creating contineous doorbell floods. In order to negate this, HW has a threshold of doorbells per client, which will stop the client doorbells from arriving if crossed. The threshold currently configured for VFs is too low - under extreme traffic scenarios, it's possible for a VF to reach the threshold and thus for its fastpath to stop working. Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Check for UNDI in uncommon branchYuval Mintz
If L2FW utilized by the UNDI driver has the same version number as that of the regular FW, a driver loading after UNDI and receiving an uncommon answer from management will mistakenly assume the loaded FW matches its own requirement and try to exist the flow via FLR. Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Fix 1G-baseT linkYaniv Rosner
Set the phy access mode even in case of link-flap avoidance. Signed-off-by: Yaniv Rosner <yaniv.rosner@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12bnx2x: Fix link for KR with swapped polarity laneYaniv Rosner
This avoids clearing the RX polarity setting in KR mode when polarity lane is swapped, as otherwise this will result in failed link. Signed-off-by: Yaniv Rosner <yaniv.rosner@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: Ariel Elior <ariel.elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/fsl: xgmac_mdio is dependent on OF_MDIOAndy Fleming
Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/fsl: Make xgmac_mdio read error message usefulShruti Kanetkar
Print the device address, the register number and the PHY ID for which the MDIO read operation failed Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: Add skb_gro_postpull_rcsum to udp and vxlanTom Herbert
Need to gro_postpull_rcsum for GRO to work with checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Update version to 5.3.60Shahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Optimize ring count validationsShahed Shaikh
- Check interrupt mode at the start of qlcnic_set_channels(). - Do not validate ring count if they are not going to change. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Pre-allocate DMA buffer used for minidump collectionShahed Shaikh
Pre-allocate the physically contiguous DMA buffer used for minidump collection at driver load time, rather than at run time, to minimize allocation failures. Driver will allocate the buffer at load time if PEX DMA support capability is indicated by the adapter. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11drivers: net: davinci_cpdma: double free on errorDan Carpenter
We recently change the kzalloc() to devm_kzalloc() so freeing "ctlr" here could lead to a double free. Fixes: e194312854ed ('drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11amd-xgbe: unwind on error in xgbe_mdio_register()Dan Carpenter
There is a typo here so we return directly instead of unwinding. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11mrf24j40: add device managed APIsVarka Bhadram
adds the device managed APIs so that no need worry about freeing the resources. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11sfc: PIO:Restrict to 64bit arch and use 64-bit writes.Jon Cooper
Fixes:ee45fd92c739 ("sfc: Use TX PIO for sufficiently small packets") The linux net driver uses memcpy_toio() in order to copy into the PIO buffers. Even on a 64bit machine this causes 32bit accesses to a write- combined memory region. There are hardware limitations that mean that only 64bit naturally aligned accesses are safe in all cases. Due to being write-combined memory region two 32bit accesses may be coalesced to form a 64bit non 64bit aligned access. Solution was to open-code the memory copy routines using pointers and to only enable PIO for x86_64 machines. Not tested on platforms other than x86_64 because this patch disables the PIO feature on other platforms. Compile-tested on x86 to ensure that works. The WARN_ON_ONCE() code in the previous version of this patch has been moved into the internal sfc debug driver as the assertion was unnecessary in the upstream kernel code. This bug fix applies to v3.13 and v3.14 stable branches. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: xen-netback: include linux/vmalloc.h againArnd Bergmann
commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct") added a use of vzalloc/vfree to interface.c, but removed the #include <linux/vmalloc.h> statement at the same time, which causes this build error: drivers/net/xen-netback/interface.c: In function 'xenvif_free': drivers/net/xen-netback/interface.c:754:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] vfree(vif->queues); ^ cc1: some warnings being treated as errors Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Andrew J. Bennieston <andrew.bennieston@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: phy: realtek: register/unregister multiple drivers properlyJongsung Kim
Using phy_drivers_register/_unregister functions is proper way to handle multiple PHY drivers registration. For Realtek PHY drivers module, it fixes incomplete current error-handlings up and adds missed unregistration for the RTL8201CP driver. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix timing of RACT setting in sh_eth_rx()Yoshihiro Shimoda
This patch fixes an issue that we cannot use nfs rootfs correctly on r8a7790 when the command below runs on a host PC. $ sudo ping -f -l 8 $BOARD_IP_ADDR Since the driver sets the RACT to 1 in the first while loop of sh_eth_rx(), the controller accepts a next frame into the next RX descriptor during the while loop. But, in the first while loop doesn't allocate a next skb. So, this patch removes the RACT setting in the first while loop of sh_eth_rx(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix receive packet "exceeded" condition in sh_eth_rx()Yoshihiro Shimoda
This patch fixes the packet "exceeded" condition in sh_eth_rx() when RACT in an RX descriptor is not set and the "quota" is 0. Otherwise, kernel panic happens because the "&n->poll_list" is deleted twice in sh_eth_poll() which calls napi_complete() and net_rx_action(). Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sxgbe: remove duplicate SXGBE_CORE_L34_ADDCTL_REG defineDan Carpenter
The SXGBE_CORE_L34_ADDCTL_REG define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: remove duplicate QLC_83XX_GET_LSO_CAPABILITY defineDan Carpenter
The QLC_83XX_GET_LSO_CAPABILITY define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-06-11 This series contains updates to igb, i40e and i40evf. Todd makes a change to igb to un-hide invariant returns by getting rid of the E1000_SUCCESS define and converting those returns to return 0. Jacob separates the hardware logic from the set function, so that we can re-use it during a ptp_reset in igb. This enables the reset to return functionality to the last know timestamp mode, rather than resetting the value. Ashish implements context flags for headwb and headwb_addr so that we do not have to keep them always enabled. Shannon updates the admin queue API for the new firmware, which adds set_pf_content, nvm_config_read/write, replaces set_phy_reset with set_phy_debug and removes nvm_read/write_reg_se. Cleans up the driver to use the stored base_queue value since there is no need to read the PCI register for the PF's base queue on every single transmit queue enable and disable as we already have the value stored from reading the capability features at startup. Anjali changes the notion of source and destination for FD_SB in ethtool to align i40e with other drivers. Adds flow director statistics to the PF stats. Fixes a bug in ethtool for flow director drop packet filter where the drop action comes down as a ring_cookie value, so allow it as a special value that can be used to configure destination control. Mitch fixes the i40evf to keep the driver from going down when it is already in a down state. This prevents a CPU soft lock in napi_disable(). Also change the i40evf to check the admin queue error bits since the firmware can indicate any admin queue error states to the driver via some bits in the length registers. Neerav separates out the DCB capability and enabled flags because currently if the firmware reports DCB capability the driver enables I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver inserts a tag when transmitting a packet from the port even if there are no DCB traffic classes configured at the port. So by adding the additional flag, I40E_FLAG_DCB_CAPABLE, that will be set when the DCB capability is present and the existing enabled flag will only be set if there are more than one traffic classes configured at the port. Greg fixes the i40e driver to not automatically accept tagged packets by default so that the system must request a VLAN tag packet filter to get packets with that tag. Greg also converts i40e to use the in-kernel ether_addr_copy() instead of mempcy(). Jesse removes the FTYPE field from the receive descriptor to match the hardware implementation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11i40e/i40evf: Bump i40e to version 0.4.10 and i40evf to 0.9.34Catherine Sullivan
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: use stored base_queue valueShannon Nelson
No need to read the PCI register for the PF's base queue on every single Tx queue enable and disable as we already have the value stored from reading the capability features at startup. Change-ID: Ic02fb622757742f43cb8269369c3d972d4f66555 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: Fix a bug in ethtool for FD drop packet filter actionAnjali Singhai Jain
A drop action comes down as a ring_cookie value, so allow it as a special value that can be used to configure destination control. Also fix the output to filter read command accordingly. Change-ID: I9956723cee42f3194885403317dd21ed4a151144 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Add Flow director stats to PF statsAnjali Singhai Jain
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: remove FTYPEJesse Brandeburg
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: check admin queue error bitsMitch Williams
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: User ether_addr_copy instead of memcpyGreg Rose
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: Do not accept tagged packets by defaultGreg Rose
Remove the filter created by the firmware with the default MAC address it reads out of the NVM storage and a promiscuous VLAN tag and replace it with a filter that will not accept tagged packets by default. The system must request a VLAN tag packet filter to get packets with that tag. Change-ID: I119e6c3603a039bd68282ba31bf26f33a575490a Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: Separate out DCB capability and enabled flagsNeerav Parikh
Currently if the firmware reports DCB capability the driver enables I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver inserts a tag when transmitting a packet from the port even if there are no DCB traffic classes configured at the port. This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set when the DCB capability is present and the existing flag I40E_FLAG_DCB_ENABLED will be set only if there are more than one traffic classes configured at the port. Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: don't go further downMitch Williams
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-29 13:16:14 +0000