aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2012-03-15ath9k: Remove aggregation flagsSujith Manoharan
SC_OP_TXAGGR and SC_OP_RXAGGR are not really needed. The HT capabilities of the station and HW can be used instead. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: Cleanup FastChannelChangeSujith Manoharan
The logic to determine whether to use FCC is a bit convoluted. Use a small helper function to decide whether FCC is to be used. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove 'other' VIF countSujith Manoharan
It is not needed and will not be used anyway since unsupported interfaces are not allowed to be created. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove unused variablesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove unnecessary initializationSujith Manoharan
There is no need to mask out SWBA/BMISS from the interrupt mask in start(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: Set IEEE80211_HW_REPORTS_TX_ACK_STATUS in rt2800Helmut Schaa
rt2800 already reports the tx ack status of each frame back to mac80211. Advertise this by setting IEEE80211_HW_REPORTS_TX_ACK_STATUS for rt2800. This allows some mac80211 features like frame loss notifications to work with rt2800. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: correction in structure name passed to sizeof()Amitkumar Karwar
"hscfg" is declared as struct mwifiex_ds_hs_cfg. Use same structure name for calculating it's size. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 9Yogesh Ashok Powar
For files sta_rx.c, sta_tx.c, txrx.c, util.c and wmm.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 8Yogesh Ashok Powar
For files sta_event.c and sta_ioctl.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 7Yogesh Ashok Powar
For sta_cmd.c and sta_cmdresp.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 6Yogesh Ashok Powar
For file sdio.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 5Yogesh Ashok Powar
For file scan.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 4Yogesh Ashok Powar
For files main.c, main.h and pcie.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 3Yogesh Ashok Powar
For files fw.h, init.c and join.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 2Yogesh Ashok Powar
For files cfg80211.c, cfp.c, and cmdevt.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-14mwifiex: fix checkpatch --strict warnings/errors Part 1Yogesh Ashok Powar
For files 11n.c, 11n.h, 11n_aggr.c, 11n_rxreorder.c Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: rename bss_conf timestamp to last_tsfJohannes Berg
This value is not really very useful by itself, yet some drivers (including iwlwifi until I can figure out what it should do) use it. At least rename it to "last_tsf" to indicate the meaning and add a note that it may be really old. I suspect the value may become useful combined with the rx_status->mactime, but we don't (yet) store that value and pass it to the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13brmc80211: dont use jiffies for BSS TSFJohannes Berg
The cfg80211_inform_bss() timestamp argument is intended to be the TSF, not any form of host timestamp. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rename fuctions and variables for better readabilityYogesh Ashok Powar
Renaming the long fuctions and variable names from 11n_rxreoder.c file to shorter ones for better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rearrange if and else blocks to avoid extra indentationYogesh Ashok Powar
This adds better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: use usleep_range instead of udelayYogesh Ashok Powar
For the delay of 10 uSec or more usleep_range is prefered. Unlike udelay, sleep_range avoids large number of undesired interrupts. Ref Documentation/timers/timers-howto.txt Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: merge functions to derive cfp by chan & freq in oneYogesh Ashok Powar
There exist different functions with very long names to derive the channel frequency and power tripplet based on band and channel/freq. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rearrange switch statementYogesh Ashok Powar
Fixing coding style by rearranging the switch statement Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rename long function names to shorter onesYogesh Ashok Powar
This saves some space and adds better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13b43: Load firmware from a work queue and not from the probe routineLarry Finger
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43 has such a structure, it must be changed. As this driver loads more than 1 firmware file, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13b43legacy: Load firmware from work queue instead of from probe routineLarry Finger
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43legacy has such a structure, it must be changed. As this driver loads 3 or 4 firmware files, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a work queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2012-03-13ath6kl: fix debug.c file modeKalle Valo
Commit 7504a3e1 ("ath6kl: add padding to firmware log records") accidentally changed debug.c mode from 100644 to 100755. Revert that back to original. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: use max_t() in ath6kl_cfg80211_connect()Kalle Valo
ath6kl/cfg80211.c:589: WARNING: max() should probably be max_t(u16, vif->listen_intvl_t, ATH6KL_MAX_WOW_LISTEN_INTL) Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: fix open parenthesis alignment in ath6kl_sdio_suspend()Kalle Valo
ath6kl/sdio.c:875: CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: replace strict_strtoul() with kstrtoul()Kalle Valo
Recommended by checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: fix regression in ath6kl_upload_board_file()Kalle Valo
My patch 24fc32b3 ("ath6kl: add ath6kl_bmi_write_hi32()") caused a regression in ath6kl_upload_board_file() and the board_address variable was not properly initialised in some cases: ath6kl/init.c:1068:6: warning: ‘board_address’ may be used uninitialized in this function Most likely this broke ar6004 support but I can't test that right now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-12iwlwifi: Add bool mvm_ucode to iwl_fwDavid Spinadel
mvm_ucode is true when mvm TLVs arive. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: change struct iwl_fwDavid Spinadel
Change iwl_fw struct to hold an array of fw_img instead of three separated instances. Change fw_img to hold an array of fw_desc instead of two separate descriptors for instructions and data. Change load_given_ucode, load_section, verification functions etc. to support this structure. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: Add TLVs and fields for 16.0 uCodeDavid Spinadel
New TLVs for ucode sections that are not known as instruction or data. New TLVs for phy-configuration and default calibrations. Add default calib and phy config fields to iwl_fw. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: more modularity in fw images and sectionsDavid Spinadel
Changed iwl_firmware_pieces structure to support an array of separate images, and an array of sections for each image. In fw_sec and fw_desc structures, added a field for offset from the HW address, to support 16.0 uCode that provides an offset instead of any other data about the section. This field is filled with default values when parsing instruction or data section. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: explicitly track whether INIT uCode was runDavid Spinadel
Remove IWL_UCODE_NONE from enum iwl_ucode_type which, by being the default value in 0-initialized memory, implicitly allowed us to track whether any uCode had ever been loaded successfully (which would have been the INIT uCode) and instead explicitly track whether or not INIT uCode has been run. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: avoid some operations if no uCode loadedDavid Spinadel
Printing the SRAM and similar testmode operations could be triggered when no uCode is loaded; prevent those invalid operations by tracking whether uCode is loaded. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: move wait_command_queue from shared to transMeenakshi Venkataraman
This wait queue really belongs to the transport layer, as it is used for sending synchronous commands to the HW. However, only op_mode knows about errors and exceptional conditions, so make this queue accessible by the op_mode. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: convert bad state message into warningJohannes Berg
Looking at logs, I see that we did get the bad state message a few times for some reason, but it doesn't indicate why or where it came from, so make it a warning in order to identify it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: abstract out missing SEQ_RX_FRAME workaroundJohannes Berg
Mohammed Shafi ran into [1] the SEQ_RX_FRAME workaround warning with a statistics notification, this means we can't just remove it as we'd hoped. Abstract it out so that the higher layer can configure this as a kind of "filter" in the transport. [1] http://mid.gmane.org/CAD2nsn1_DzbRHuSbS_1rFNzuux_9pW1-pABEasQ01_y7-ndO5w@mail.gmail.com Reported-by: Mohammed Shafi <shafi.wireless@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwlwifi: remove TX hex debugJohannes Berg
Tracing is much better for this, so remove the hex printk debug for the TX command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: fix going to full-sleep on PS idleFelix Fietkau
The check for PS_WAIT_FOR_TX_ACK was inverted, the hardware should only go to full sleep if no tx is pending. Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: Fix mactime from being clobbered in rx_statusAshok Nagarajan
mactime was being overwritten by the function ath9k_rx_skb_preprocess. Fixed by memsetting rx_status in ath_rx_tasklet. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: configure bss info at assoc notificationRajkumar Manoharan
The proper place to configure bss info is at assoc notification. So that ath9k continues to work if the supirous bssid notification will be removed in future. Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12rt2x00: Fix beacon skew in rt2800pciHelmut Schaa
rt2800pci is suffering from beacon skew in AP mode. Some powersaving clients (like VOIP phones) are getting into trouble after some time when the beacon skew is getting too big. The ralink legacy drivers contain a function that indicates that the beacon timer is off by 1us per tbtt. And this function works around that by reducing the beacon interval for every 64th beacon transmission by 64us (the smallest possible value). Do the same in rt2800pci. This allows proper powersaving when rt2800pci is used in AP mode. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k_hw: Fix enabling of MCI and RTTMohammed Shafi Shajakhan
tested in AR9462 Rev:2, both hardware capability flag are set Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12net/wireless: ipw2x00: remove unused definitions for regulatory domainStanislav Yakovlev
ipw2200 driver does not use these defines, it uses geo struct instead. Therefore remove them from its header. Note: we keep them in the ipw2100 driver's header, because the driver still uses them. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: Add wiphy name to log messages.Ben Greear
On systems with multiple NICs, it's nice to know which one is producing warnings. Here is an example of the new ouput: ath: wiphy0: Failed to stop TX DMA, queues=0x005! Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211_hwsim: Fix set mactime on receiver hwsim radioAshok Nagarajan
The patch "mac80211_hwsim: Add tsf to beacons, probe responses and radiotap header" was setting the mactime on wrong hwsim radio. This patch fixes it. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-25 15:48:53 +0000