aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex
AgeCommit message (Collapse)Author
2013-05-19mwifiex: fix setting of multicast filterDaniel Drake
commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream. A small bug in this code was causing the ALLMULTI filter to be set when in fact we were just wanting to program a selective multicast list to the hardware. Fix that bug and remove a redundant if condition in the code that follows. This fixes wakeup behaviour when multicast WOL is enabled. Previously, all multicast packets would wake up the system. Now, only those that the host intended to receive trigger wakeups. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-19mwifiex: fix memory leak issue when driver unloadAmitkumar Karwar
commit f16fdc9d2dc1e5b270e9a08377587e831e0d36ac upstream. After unregister_netdevice() call the request is queued and reg_state is changed to NETREG_UNREGISTERING. As we check for NETREG_UNREGISTERED state, free_netdev() never gets executed causing memory leak. Initialize "dev->destructor" to free_netdev() to free device data after unregistration. Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-19mwifiex: clear is_suspended flag when interrupt is received earlyBing Zhao
commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream. When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN mwifiex is often flooded with "not allowed while suspended" messages and the interface is unusable. [ 202.171609] int: sdio_ireg = 0x1 [ 202.180700] info: mwifiex_process_hs_config: auto cancelling host sleep since there is interrupt from the firmware [ 202.201880] event: wakeup device... [ 202.211452] event: hs_deactivated [ 202.514638] info: --- Rx: Data packet --- [ 202.514753] data: 4294957544 BSS(0-0): Data <= kernel [ 202.514825] PREP_CMD: device in suspended state [ 202.514839] data: dequeuing the packet ec7248c0 ec4869c0 [ 202.514886] mwifiex_write_data_sync: not allowed while suspended [ 202.514886] host_to_card, write iomem (1) failed: -1 [ 202.514917] mwifiex_write_data_sync: not allowed while suspended [ 202.514936] host_to_card, write iomem (2) failed: -1 [ 202.514949] mwifiex_write_data_sync: not allowed while suspended [ 202.514965] host_to_card, write iomem (3) failed: -1 [ 202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF This can be readily reproduced when putting the XO-4 in a loop where it goes to sleep due to inactivity, but then wakes up due to an incoming ping. The error is hit within an hour or two. This issue happens when an interrupt comes in early while host sleep is still activated. Driver handles this case by auto cancelling host sleep. However is_suspended flag is still set which prevents any cmd or data from being sent to firmware. Fix it by clearing is_suspended flag in this path. Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07mwifiex: Call pci_release_region after calling pci_disable_deviceYogesh Ashok Powar
commit 5b0d9b218b74042ff72bf4bfda6eeb2e4bf98397 upstream. "drivers should call pci_release_region() AFTER calling pci_disable_device()" Please refer section 3.2 Request MMIO/IOP resources in Documentation/PCI/pci.txt Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07mwifiex: Use pci_release_region() instead of a pci_release_regions()Yogesh Ashok Powar
commit c380aafb77b7435d010698fe3ca6d3e1cd745fde upstream. PCI regions are associated with the device using pci_request_region() call. Hence use pci_release_region() instead of pci_release_regions(). Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03mwifiex: complete last internal scanBing Zhao
We are waiting on first scan command of internal scan request before association, so we should complete on last internal scan command response. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-01mwifiex: limit channel number not to overflow memoryStone Piao
Limit the channel number in scan request, or the driver scan config structure memory will be overflowed. Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mwifiex: reset skb->data after processing PCIe sleep confirm cmd resposeAvinash Patil
This patch is a bug fix for an issue wherein power save was not working for PCIe. This happens because for processing power save sleep confirm command we pull skb so that skb->data points ahead of interface header. We use same skb to get other cmda responses as well. So if we don't push skb after processing cmd response, it results into reduction in skb->len and finally skb->len reaches zero. This causes failure in processing sleep command response. Fix this by pushing skb by INTF_HEADER_LEN at the end of command response processing. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cancel cmd timer and free curr_cmd in shutdown processBing Zhao
curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: skip pending commands after function shutdownBing Zhao
During rmmod mwifiex_sdio processing FUNC_SHUTDOWN command is sent to firmware. Firmware expcets only FUNC_INIT once WLAN function is shut down. Any command pending in the command queue should be ignored and freed. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: fix race when queuing commandsAmitkumar Karwar
Running the following script repeatedly on XO-4 with SD8787 produces command timeout and system lockup. insmod mwifiex_sdio.ko sleep 1 ifconfig eth0 up iwlist eth0 scan & sleep 0.5 rmmod mwifiex_sdio mwifiex_send_cmd_async() is called for sync as well as async commands. (mwifiex_send_cmd_sync() internally calls it for sync command.) "adapter->cmd_queued" gets filled inside mwifiex_send_cmd_async() routine for both types of commands. But it is used only for sync commands in mwifiex_wait_queue_complete(). This could lead to a race when two threads try to queue a sync command with another sync/async command simultaneously. Get rid of global variable and pass command node as a parameter to mwifiex_wait_queue_complete() to fix the problem. Cc: <stable@vger.kernel.org> # 3.8 Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-08mwifiex: fix potential out-of-boundary access to ibss rate tableBing Zhao
smatch found this error: CHECK drivers/net/wireless/mwifiex/join.c drivers/net/wireless/mwifiex/join.c:1121 mwifiex_cmd_802_11_ad_hoc_join() error: testing array offset 'i' after use. Cc: <stable@vger.kernel.org> # 3.0+ Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-27mwifiex: correct sleep delay counterAvinash Patil
Maximum delay for waking up card is 50 ms. Because of typo in counter, this delay goes to 500ms. This patch fixes the bug. Cc: <stable@vger.kernel.org> # 3.2+ Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-22mwifiex: fix system freeze while reloading driverAvinash Patil
Unload sequence for mwifiex PCIE driver is as follows: 1. Invoking cleanup module from kernel results into pci_unregister_driver 2. Kernel invokes PCIE remove() handler which disconnects all interfaces. 3. One step during disconnect is to clean PCIE TX rings. During this we read txbd_rdptr from FW. While loading driver next time, we see pci_enable_device() results into system freeze. This may have happened because we accessed PCI device after unregistering from bus driver. Removing this ioread() operation resolves this bug. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-22mwifiex: don't drop carrier flag over suspendDaniel Drake
If the system suspends with mwifiex wifi powered on, and is then woken by an ICMP ping packet, the ping response is discarded by the kernel because the kernel incorrectly thinks there is no carrier. I can't see any valid reason to want to report loss of carrier here, so remove the offending code. Fixes http://dev.laptop.org/ticket/12554 Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking update from David Miller: 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP timestamp offset. From Andrey Vagin. 2) VMWARE VM VSOCK layer, from Andy King. 3) Much improved support for virtual functions and SR-IOV in bnx2x, from Ariel ELior. 4) All protocols on ipv4 and ipv6 are now network namespace aware, and all the compatability checks for initial-namespace-only protocols is removed. Thanks to Tom Parkin for helping deal with the last major holdout, L2TP. 5) IPV6 support in netpoll and network namespace support in pktgen, from Cong Wang. 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP) support, from David Ward. 7) Compute packet lengths more accurately in the packet scheduler, from Eric Dumazet. 8) Use per-task page fragment allocator in skb_append_datato_frags(), also from Eric Dumazet. 9) Add support for connection tracking labels in netfilter, from Florian Westphal. 10) Fix default multicast group joining on ipv6, and add anti-spoofing checks to 6to4 and 6rd. From Hannes Frederic Sowa. 11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern times, rearrange inet frag datastructures for better cacheline locality, and move more operations outside of locking. From Jesper Dangaard Brouer. 12) Instead of strict master <--> slave relationships, allow arbitrary scenerios with "upper device lists". From Jiri Pirko. 13) Improve rate limiting accuracy in TBF and act_police, also from Jiri Pirko. 14) Add a BPF filter netfilter match target, from Willem de Bruijn. 15) Orphan and delete a bunch of pre-historic networking drivers from Paul Gortmaker. 16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although this still needs some minor bug fixing before it's %100 correct in all cases. 17) Handle unresolved IPSEC states like ARP, with a resolution packet queue. From Steffen Klassert. 18) Remove TCP Appropriate Byte Count support (ABC), from Stephen Hemminger. This was long overdue. 19) Support SO_REUSEPORT, from Tom Herbert. 20) Allow locking a socket BPF filter, so that it cannot change after a process drops capabilities. 21) Add VLAN filtering to bridge, from Vlad Yasevich. 22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in the ipv6 routes, from YOSHIFUJI Hideaki. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits) ipv6: fix race condition regarding dst->expires and dst->from. net: fix a wrong assignment in skb_split() ip_gre: remove an extra dst_release() ppp: set qdisc_tx_busylock to avoid LOCKDEP splat atl1c: restore buffer state net: fix a build failure when !CONFIG_PROC_FS net: ipv4: fix waring -Wunused-variable net: proc: fix build failed when procfs is not configured Revert "xen: netback: remove redundant xenvif_put" net: move procfs code to net/core/net-procfs.c qmi_wwan, cdc-ether: add ADU960S bonding: set sysfs device_type to 'bond' bonding: fix bond_release_all inconsistencies b44: use netdev_alloc_skb_ip_align() xen: netback: remove redundant xenvif_put net: fec: Do a sanity check on the gpio number ip_gre: propogate target device GSO capability to the tunnel device ip_gre: allow CSUM capable devices to handle packets bonding: Fix initialize after use for 3ad machine state spinlock bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate() ...
2013-02-19Merge branch 'for-3.9-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo: "This is part of on-going cleanups to remove / minimize usages of workqueue interfaces which are deprecated and/or misleading. This round drops a number of usages of [delayed_]work_pending(), which are dangerous as they lack any form of synchronization and thus often lead to buggy / unnecessary code. There are a couple legitimate use cases in kernel. Hopefully, they can be converted and [delayed_]work_pending() can be removed completely. Even if not, removing most of misuses should make it more difficult to find examples of misuses and thus slow down growth of them. These changes are independent from other workqueue changes." * 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: wimax/i2400m: fix i2400m->wake_tx_skb handling kprobes: fix wait_for_kprobe_optimizer() ipw2x00: simplify scan_event handling video/exynos: don't use [delayed_]work_pending() tty/max3100: don't use [delayed_]work_pending() x86/mce: don't use [delayed_]work_pending() rfkill: don't use [delayed_]work_pending() wl1251: don't use [delayed_]work_pending() thinkpad_acpi: don't use [delayed_]work_pending() mwifiex: don't use [delayed_]work_pending() sja1000: don't use [delayed_]work_pending()
2013-02-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-18mwifiex: add 802.11AC supportYogesh Ashok Powar
For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: coding style cleanup in bss parameter updateYogesh Ashok Powar
They all can make one line. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: fix empty TX ring check for PCIe8897 while unloading driverAvinash Patil
While unloading driver, we free all pending TX packets by flushing TX ring. There is unhandled case for PCIE8897 while checking for ring empty condition. This patch adds the handling by calling mwifiex_pcie_txbd_empty(). Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-14mwifiex: device specific sleep cookie handling for PCIeAvinash Patil
This patch adds support for handling of PCIe sleep cookie depending upon device properties. Some PCIe devices need sleep cookie probing before accessing HW while some others don't. A new sleep_cookie variable is defined as part of mwifiex_pcie_card_reg strcture and set/reset as per device capability. Sleep cookie is allocated/accessed/freed only when flag sleep_cookie for this particular device is enabled. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-14Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c
2013-02-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-02-11mwifiex: add PCIe8897 supportAvinash Patil
This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: define generic data type for PCIe ring buffersAvinash Patil
This patch defines PCIe ring buffer array pointer as void instead of mwifiex_pcie_buf_desc. This will enable us to use same pointers for ring operations instead of new structures if buffer descriptor structure changes. Also split out event buffer descriptor structure from struct mwifiex_pcie_buf_desc. For PCIe8766 TX/RX buffer descriptor is same as evevt buffer descriptor. Newer chips could use different TX/RX buffer descriptor while event descriptor remains the same. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: separate ring initialization and ring creation routinesAvinash Patil
This patch separates PCIe ring initialization from ring creation routines. This modularizes ring creation(TXBD, RXBD and event rings) functions. Readability has been improved while moving the code around. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11mwifiex: store card specific data in PCI device table entryAvinash Patil
This patch adds support for storing PCIe device specific data into driver_data structure of pci_device_id. When a device with known device_id is probed, we use this driver_data to populate card specific structres in driver. This enables to remove device specific defines for scratch registers, firmware name, FW download block size, etc. from source code. This will make addition of support for new chipsets a lot easier. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-11cfg80211: move TSF into IEsJohannes Berg
While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: remove scan ies NULL checkJohannes Berg
There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/ethtool.c drivers/net/vmxnet3/vmxnet3_drv.c drivers/net/wireless/iwlwifi/dvm/tx.c net/ipv6/route.c The ipv6 route.c conflict is simple, just ignore the 'net' side change as we fixed the same problem in 'net-next' by eliminating cached neighbours from ipv6 routes. The e1000e conflict is an addition of a new statistic in the ethtool code, trivial. The vmxnet3 conflict is about one change in 'net' removing a guarding conditional, whilst in 'net-next' we had a netdev_info() conversion. The iwlwifi conflict is dealing with a WARN_ON() conversion in 'net-next' vs. a revert happening in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04wireless: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Remove now unused variables. Remove unnecessary memset after kzalloc->kcalloc. Whitespace cleanups for these changes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-01mwifiex: remove max_tx_buf_sizeBing Zhao
max_tx_buf_size is not used any more after reconfiguration of tx buffer size has been removed. Also add missing curr_tx_buf_size update while dumping debug info via debugfs. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-01mwifiex: do not reconfigure tx buffer size in firmware while associatingBing Zhao
It's observed that reconfiguration of tx buffer size before association can cause data path failure in firmware after associated. Although this is only found with PCIe cards, but potentially it could happen with any other interfaces as well. The tx buffer reconfiguration is not really useful in firmware. Let's remove it for all interfaces. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: avoid out of bounds access in mwifiex_get_common_rates.Cyril Roelandt
Check that the array indexes are in-bounds before accessing the rate2 and tmp arrays. Found with the following semantic patch: <smpl> @@ identifier t; identifier idx; expression E; statement S; @@ * for (... ; <+... t[idx] ...+> && idx < E ; ...) S </smpl> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: do not overwrite error code from lower layer driverBing Zhao
Instead of converting it to a bogus error code -1, we should return the original error code from lower layer driver. This error code will be printed so it may give user some clues on what has happened. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: don't return zero on failure paths in mwifiex_pcie_init()Alexey Khoroshilov
If pci_iomap() fails in mwifiex_pcie_init(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: fix invalid access of PCIe RxBD ring buffer descriptorAvinash Patil
This patch fixes invalid access of RxBD ring buffer descriptor's length and flag inside PCIe send_data_complete() routine. We are supposed to modify TxBD buffer descriptor's length and flag here. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: fix incomplete scan in case of IE parsing errorBing Zhao
A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Cc: "3.6+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-22mwifiex: correction in status codes used for association failureAmitkumar Karwar
When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-01-22mwifiex: fix typo in PCIe adapter NULL checkAvinash Patil
Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" <stable@vger.kernel.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-28 10:11:40 +0000