aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211
AgeCommit message (Collapse)Author
2013-02-03brcmsmac: increase timer reference count for new timers onlyPiotr Haber
commit a1fe52801a992e590cdaee2fb47a94bac9b5da90 upstream. On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02brcmfmac: Fix big endian host configuration data.Hante Meuleman
commit e020a83d0942a5aceac35986500c9834efc8707d upstream. Fixes big endian host configuration parameters. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02brcmfmac: fix big endian bug in i-scan.Hante Meuleman
commit ed205b361956c96e0d8c09a8c9135a6a79cd9541 upstream. ssid len is 32 bit and needs endian conversion for big endian systems. Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02brcmfmac: fix a double spin_unlock_irqrestore issue in dpcFranky Lin
dpc_tl_lock is not acquired in the error handle code for bus down. But it's unlocked using spin_unlock_irqrestore after finishing task list walk down. Grab the lock before breaking the loop to avoid a double unlock. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27brcm80211: fmac: fix missing completion events issueFranky Lin
dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27brcm80211: fmac: fix SDIO function 0 register r/w issueFranky Lin
SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23brcmsmac: "INTERMEDIATE but not AMPDU" only when tracingEldad Zack
I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Acked-by: Franky Lin<frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13brcm80211: smac: resume transmit fifo upon receiving framesArend van Spriel
There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211. This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3. Cc: stable@vger.kernel.org Tested-by: Francesco Saverio Schiavarelli <fschiava@libero.it> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/hw.c
2012-03-13brmc80211: dont use jiffies for BSS TSFJohannes Berg
The cfg80211_inform_bss() timestamp argument is intended to be the TSF, not any form of host timestamp. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-03-05brcm80211: smac: cleanup couple of debug output statementsArend van Spriel
Tidying up some debug statements in brcms_c_ampdu_dotxstatus_complete() that got broken strings to satisfy checkpatch, but the rules changed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: smac: remove firmware requests from init_module syscallArend van Spriel
As indicated in [1] on netdev mailing list drivers should not block on the init_module() syscall. This patch defers the actual driver registration to a workqueue so the init_module() syscall can complete without delay. [1] http://article.gmane.org/gmane.linux.network/217729/ Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: fmac: remove firmware requests from init_module syscallArend van Spriel
As indicated in [1] on netdev mailing list drivers should not block on the init_module() syscall. This patch defers the actual driver registration to a workqueue so the init_module() syscall can complete without delay. [1] http://article.gmane.org/gmane.linux.network/217729/ Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: fmac: initialize host interface drivers regardless resultArend van Spriel
The module init function of brcmfmac calls init functions for SDIO and USB doing driver registration. This patch removes terminating the module init when a driver registration for one host interface fails. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: fmac: use counters in brcmf_bus structureArend van Spriel
The usb code defines a structure for counting statistics. However, it should use the statistics entry provided in brcmf_bus as that is exposed to the net_device. The usb private statistics counter only remains with counters for control packets between driver and usb device. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: fmac: remove brcmf_usb_attrib structureArend van Spriel
Several fields in this structure are only written once or not used at all. Remaining two fields have been moved and brcmf_usb_attrib definition has been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Kan Yan <kanyan@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05brcm80211: fmac: remove unnecessary NULL pointer checkArend van Spriel
In brcmf_usb_up() the variable devinfo was checked for being a NULL pointer, but this can not happen. Also the check was done after dereferencing the pointer. This patch removes the check. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Kan Yan <kanyan@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/tg3.c Conflicts in the statistics regression bug fix from 'net', but happily Matt Carlson originally posted the fix against 'net-next' so I used that to resolve this. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-02-27brcm80211: fmac: use correct firmware filenameRafał Miłecki
Also don't use so generic BRCMF_USB_FW_NAME as we may need different firmwares in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27brcm80211: fmac: fix a couple checking after dereference bugsDan Carpenter
There were two dereferencing before checking for NULL static checker complaints in this new file. The list cursor is never NULL so that check can be removed. I moved the other dereference after the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-23brcm80211: smac: only print block-ack timeout message at trace levelArend van Spriel
In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-23brcm80211: smac: fix endless retry of A-MPDU transmissionsArend van Spriel
The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7e6f69c0f0a576554df3df5b1b519c479 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: make sdio firmware filename specificArend van Spriel
The sdio driver part uses firmware name brcmfmac.bin. With addition of usb this name is too generic. This patch renames the filename to brcmfmac-sdio.bin. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: add USB support for bcm43235/6/8 chipsetsArend van Spriel
This patch extends the use of the brcmfmac driver with support for chipsets with a USB host interface. The first chipsets supported are the bcm43235, bcm43236, and bcm43238 for which firmware has been submitted. This driver change has been successfully built for x86, x86_64, ppc64, arm_le, and mips_be. It has been tested successfully on x86 and x86_64. Cc: M. Lambert <lambertm@westman.wave.ca> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Kan Yan <kanyan@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: use spinlock calls saving irq flags in brcmf_enq_event()Arend van Spriel
This function is executed within irq context. The call spin_unlock_irq does enable interrupts which is not desired in the irq context. This patch replaces them using the spin_loc_irqsave and spin_unlock_irqrestore functions. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Kan Yan <kanyan@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: change allocation flag in brcmf_enq_event() functionArend van Spriel
As the function is called from atomic context it should not do the kzalloc call with GFP_KERNEL. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Kan Yan <kanyan@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: update bus state in common driver partArend van Spriel
The bus state is updated in the sdio bus init function, but it is better to do it when the brcmf_bus_start() function is completed successfully. The brcmf_netdev_open() function will return -EAGAIN until the state is updated instead of calling brcmf_bus_start() to avoid reentering that function. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: only return success in brcmf_sdbrcm_bus_init() when trueArend van Spriel
The function brcmf_sdbrcm_bus_init() always returned success except for firmware download failure. However, also when enabling SDIO function 2 is failing the function should return failure. This patch fixes that. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: move module entry points to dhd_linux.cArend van Spriel
The module_init/exit functions are moved to dhd_linux.c to prepare for supporting multiple host interface types. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: use specific types in struct brcmf_busArend van Spriel
The fields bus_priv and drvr are defined as void pointer. It is preferred to have specific types for compiler type checking. To prepare for other bus types the bus_priv field is defined as a union containing the sdio bus private structure reference. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: make sure cancel_work_sync only called after INIT_WORKFranky Lin
INIT_WORK only gets called after brcmf_proto_attach returns success. This dependency should be annotated in brcmf_detach to avoid any error. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: fmac: resolve smatch issues in brcmfmac codeArend van Spriel
This patch resolves the following smatch issues: wl_cfg80211.c +1377 brcmf_cfg80211_connect(65) warn: min_t truncates here '(sme->ssid_len)' (4294967295 vs 9223372036854775807) dhd_sdio.c +1275 brcmf_sdbrcm_rxglom(156) warn: min_t truncates here '(pfirst->len)' (2147483647 vs 4294967295) dhd_sdio.c +1457 brcmf_sdbrcm_rxglom(338) warn: min_t truncates here '(pfirst->len)' (2147483647 vs 4294967295) bcmsdh_sdmmc.c +300 brcmf_sdioh_request_buffer(10) warn: variable dereferenced before check 'pkt' (see line 295) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: smac: remove smatch warnings from brcmsmac codeArend van Spriel
The patch fixes following smatch warnings: main.c +2902 brcms_b_read_objmem(11) info: ignoring unreachable code. mac80211_if.c +1146 brcms_suspend(8) error: we previously assumed 'wl' could be null (see line 1145) srom.c +641 _initvars_srom_pci(16) error: potential null dereference 'entry'. (kzalloc returns null) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: smac: fix endless retry of A-MPDU transmissionsArend van Spriel
The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7e6f69c0f0a576554df3df5b1b519c479 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: smac: remove redundant assignments from txpwrctrl_pwr_setup_nphyArend van Spriel
The function wlc_phy_txpwrctrl_pwr_setup_nphy() does assign a local variable target_pwr_qtrdbm in several code paths, but in the end all code paths are coming to an assignment of that variable which does override all previous. So those early and redundant assignments have been removed. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-22brcm80211: smac: fix unintended fallthru in wlc_phy_radio_init_2057()Arend van Spriel
The radio initialization for 2057 rev 5 was using the incorrect register table for the initialization. This patch fixes that. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-13drivers/net: Remove boolean comparisons to true/falseJoe Perches
Booleans should not be compared to true or false but be directly tested or tested with !. Done via cocci script: @@ bool t; @@ - t == true + t @@ bool t; @@ - t != true + !t @@ bool t; @@ - t == false + !t @@ bool t; @@ - t != false + t Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rtlwifi/rtl8192se/sw.c
2012-02-01Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-24brcmfmac: Trivial typo of "couldn" to "could" fixJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use pr_fmt and pr_<level>Joe Perches
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use brcmu_dbg_hex_dumpJoe Perches
Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches
Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcmfmac: Remove useless #ifdef DEBUGJoe Perches
This doesn't do anything anymore. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Add and use brcmX_dbg_dump_hexJoe Perches
Reduce the number of #ifdef DEBUG uses by adding a dbg_hex_dump routine which has the appropriate #ifdef DEBUG test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcmfmac: Convert printk(KERN_DEBUG to pr_debugJoe Perches
Allow dynamic debugging. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24brcm80211: Use normal DEBUG defineJoe Perches
Current CONFIG_BRCMDBG flag when enabled does not necessarily enable proper pr_debug output when DEBUG is not also enabled. Remove BCMDBG define and just use DEBUG instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-24 23:50:39 +0000