aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2013-11-27ath10k: decouple ath10k_pci_start_ce()Michal Kazior
The function did a couple of things: it allocated CE completions, registered CE callbacks and enabled CE interrupts through HW registers. This cannot be so. Split the function into one that allocates CE completions and the other one that starts off CE operation. This is required for future legacy shared interrupt handling. This also fixes possible memory leak if post rx failed. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-27ath10k: don't use interrupts for BMIMichal Kazior
It's not really necessary for interrupts to be used for BMI. BMI already assumes there's only one caller at a time and it works directly with CE. Make BMI poll for CE completions instead of waiting for interrupts. This makes disabling interrupts during early boot possible. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-27ath10k: split up pci irq codeMichal Kazior
Hardware waits until host signals whether it has chosen MSI(-X) or shared legacy interrupts. It is not required for the driver to register interrupt handlers immediately. This patch prepares the pci irq code for more changes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-27ath10k: don't consume other's shared interruptsMichal Kazior
ath10k assumed all interrupts were directed to it. This isn't the case for legacy shared interrupts. ath10k consumed interrupts for other devices. Check device irq status and return IRQ_NONE when appropriate. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-25cfg80211: add flags to define country IE processing rulesLuis R. Rodriguez
802.11 cards may have different country IE parsing behavioural preferences and vendors may want to support these. These preferences were managed by the REGULATORY_CUSTOM_REG and the REGULATORY_STRICT_REG flags and their combination. Instead of using this existing notation, split out the country IE behavioural preferences as a new flag. This will allow us to add more customizations easily and make the code more maintainable. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up conflicts] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-11-20ath10k: show hardware and firmware info prints only onceKalle Valo
This makes ath10k a lot less spammy by default. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-20ath10k: make core boot messages more compactKalle Valo
We can show the same amount of information in one line. And then it's easier to show this information only during first firmware boot (see next patch). For UART printouts there's already a message when they are enabled so no need to have a print when they are disabled, that's the default anyway. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-20ath10k: don't show MSI registration warningsKalle Valo
Convert the MSI failure warnings to a debug message to make them less spammy. Also convert the irq mode printout to a single print to make it easier to show it only once. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-20ath10k: add debugfs file to control radar events blockingMarek Puzyniak
Sometimes for DFS testing is required to stay on current channel even after radar detected. This patch allows to enable/disable radar detected event to be passed to mac80211. By default radar detected event in not blocked. To block it: echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/dfs_block_radar_events To unblock again: echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/dfs_block_radar_events Inform about blocking radar detected event even when logs are disabled for throughput/performance reasons. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-20ath10k: introduce DFS implementationMarek Puzyniak
Configure interface combination for AP running on channels where radar detection is required. It allows only one type of interface - AP on DFS channel and limits number of AP interfaces to 8. Setup WMI channel flags accordingly to mac channel configuration. CAC based on additional monitor vdev is started if required for current channel. kvalo: dropped ATH10K_DFS_CERTIFIED config option as this the DFS still depends on few mac80211 and cfg80211 patches which are on mac80211-next.git right now. The config option will be added later once all dependencies are available. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-20ath10k: add phyerr/dfs handlingJanusz Dziedzic
Handle phyerr, dfs event, radar_report and fft_report. Add also debugfs dfs_simulate_radar and dfs_stats files. Use ath dfs pattern detector. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-15ath9k: Fix issue with MCS15Sujith Manoharan
On some boards which are based on AR9300, AR9580 or AR9550, MCS15 usage is problematic. This is because these boards use a "frequency doubler", which doubles the refclk to get better EVM, but causes spurs. Handle this properly in the driver to recover throughput. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath9k: Update AR9462 2.1 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath: fix dynamic user regulatory settingsLuis R. Rodriguez
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15ath10k: clear tx status before submitting to mac80211Michal Kazior
Garbage was reported in ieee80211_tx_info. This led to a WARN_ON in cfg80211_calculate_bitrate(). This also fixes some random tx bitrate values reported through `iw` command. Reported-By: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-15ath10k: expand the wmi mgmt queue limit to 128Bartosz Markowski
It was obseverd many times the short queue limit can be easily exceeded in case of AP multiple BSSID scenarios. "ath10k: wmi mgmt_tx queue limit reached." This was leading to TX packets drops. This patch expands the queue limit to 128. After many stress experiments (high traffic and lot of management frames in the air) the new value seems to fix the problem on platforms with limited resources. Reported-By: Tomasz Skapski <tomasz.skapski@tieto.com> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-15ath10k: remove htt rx amsdu clear retry bit hackKalle Valo
With commit 0cfcefef1 ("mac80211: support reporting A-MSDU subframes individually") there's no need to have the hack to clear the retry bit in ath10k_htt_rx_amsdu(), mac80211 can handle this properly now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-15ath10k: allow dynamic bandwidth in hw rate controlMichal Kazior
Frames were never retransmitted with different/lower bandwidths, e.g. only 80MHz bandwidth was used when dealing with a VHT80 peer. Allow HW rate control to try out different bandwidths when retransmitting. This increases robustness. Also, document the parameter properly. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12ath10k: fix core init failpathMichal Kazior
HIF was not stopped properly in ath10k_core_start() upon failure. This could cause memory leaks of CE completions entries and possibly other issues as well. Move the HIF start/stop out of ath10k_htc_wait_target(). The ctl_resp completion is already prepared in ath10k_htc_init. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: reset device upon stopping/power downMichal Kazior
This should make sure the device won't issue any interrupts nor access any memory after the driver is stopped/freed thus avoid memory corruption in some cases. Reported-By: Ben Greear <greearb@candelatech.com> Reported-By: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: add and fix some PCI printsMichal Kazior
Add missing error reporting and adjust other prints to make everything more consistent. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: re-arrange PCI init codeMichal Kazior
This patch moves irq registering after necessary structures have been allocated and initialized. This should prevent interrupts from causing tasklet access invalid memory pointers. Reported-By: Ben Greear <greearb@candelatech.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: guard against CE corruption from firmwareMichal Kazior
In case firmware crashes it may report CE completions for entries that were never submitted/filled with meaningful data. This in turn led to NULL dereferences. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: propagate ath10k_ce_disable_interrupts() errorsMichal Kazior
This shouldn't be silenced. This will be necessary for PCI init code reordering. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: use ath10k_do_pci_wake/sleepMichal Kazior
This removes some remaining direct use of the wake register which could interfere with power state tracking of the target device. This will allow initialization code reordering. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: remove meaningless checkMichal Kazior
The check doesn't make much sense. If the address were to be 0x0000 the check would fail. In this case a 0 address isn't wrong. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: fix ath10k_ce_init() failpathMichal Kazior
Make sure to put target back to sleep. This was a minor issue as it didn't really matter if we put target back to sleep at this point. It just looked wrong. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: make sure to mask all CE irqsMichal Kazior
CE error interrupts were not disabled. This could lead to invalid memory accesses / memory corruption. Also make sure CE watermark interrupts are also disabled. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: rename ath10k_pci_reset_target()Michal Kazior
What the function does is to actually wait for the firmware indication bit to be set. Prerequisite for this is having interrupts registered. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: split tasklet killing functionMichal Kazior
The function will soon be called from more than 1 place. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: don't forget to kill fw error taskletMichal Kazior
It was possible for FW error tasklet to be executed during teardown. This could lead to system crashes and/or memory corruption. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: remove ar_pci->ce_countMichal Kazior
It wasn't really useful to have it to begin with. This makes it a little simpler to re-arrange PCI init code as some function depended on ar_pci->ce_count being set. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-12ath10k: add logging to better determine some VIF/STA creation failuresBen Greear
Not all errors were properly notified, fix that. kvalo: use ath10k_warn() for all messages, cosmetic changes to some of the messages Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-11wcn36xx: missing unlocks on error pathsDan Carpenter
There are several places which are missing unlocks. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11wcn36xx: Add missing unlock before returnWei Yongjun
Add the missing unlock before return from function wcn36xx_smd_update_proberesp_tmpl() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan
Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11wcn36xx: harmless memory corruption bug in debugfsDan Carpenter
On 64 bit systems we write past the end of the arg[] array. Fixes: 8e84c2582169 ('wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: dfs_debug fix possible NULL dereferenceJanusz Dziedzic
Fix possible NULL (sc->dfs_detector) pointer dereference. Detected by Smatch: drivers/net/wireless/ath/ath9k/dfs_debug.c:67 read_file_dfs() error: we previously assumed 'sc->dfs_detector' could be null (see line 47) Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11ath9k: DFS radar use correct width enumJanusz Dziedzic
Use correct width enums when setup radar_detect_widths for DFS. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-11-08ath10k: Fix un-initialized debug objects.Ben Greear
If the 'ar' registration fails early, the debug objects were not initialized, and trouble ensued when the object was later destroyed and the un-initialized objects were accessed. Per Kalle's suggestion, move the debug_destroy to the core_unregister method. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-07ath9k: enable DFS for IBSS modeSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-06ath10k: fix possible memory leak in ath10k_pci_probe()Wei Yongjun
memory is malloced in ath10k_pci_probe() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-09-24 11:53:42 +0000