aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
AgeCommit message (Collapse)Author
2012-09-30Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24ath9k_hw: Add a HW callback to set diversitySujith Manoharan
This patch adds a new callback to handle WLAN RX diversity for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-24ath9k_hw: Use HW cap ATH9K_HW_CAP_ANT_DIV_COMBSujith Manoharan
Instead of trying to determine whether antenna diversity is enabled by parsing eeprom data, use ATH9K_HW_CAP_ANT_DIV_COMB which is already filled at init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Rename antenna diversity macrosSujith Manoharan
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 HW supportSujith Manoharan
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and configure thermocal for AR9462Rajkumar Manoharan
Read and configure thermometer calibration results read from OTP card. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and apply thermometer settings from EEPROMRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-10ath9k: make PA linearization optional, disabled by default and fix checksFelix Fietkau
Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: fix indentation in ar9003_hw_set_power_per_rate_tableGabor Juhos
The current indentation is off by one tab. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: optimize power level initialization for CTL_[25]GHT20Gabor Juhos
The first part of the power array is initialized in a loop and the last two values are initialized separately. Extend the loop to cover the last two items, and remove the separate initialization. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-17ath9k_hw: fix SREV checks for applying tuning caps from EEPROMFelix Fietkau
AR9485, AR9330 and AR9340 are the chips that this is *NOT* supposed to be applied on. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: apply XLNA bias settings from EEPROMFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: clean up AR9003 EEPROM codeFelix Fietkau
- add an inline function for getting the correct modal EEPROM struct - remove unnecessary indirection through ath9k_hw_ar9300_get_eeprom access the relevant fields directly Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: apply XPA timing control values from EEPROMFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-17ath9k_hw: fall back to OTP ROM when platform data has no valid eeprom dataFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-07-09ath9k: skip internal regulator configuration for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix antenna control configuration for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-09ath9k: fix XPABIASLEVEL settings for AR9550Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-06-06ath9k_hw: program BT to control SPDTRajkumar Manoharan
program BT to control SPDT everytime while loading switch table from eeprom. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-06wireless: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p Neatened the mwifiex_deauthenticate_infra function which was doing odd things with array pointers and not using is_zero_ether_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-05ath9k: Fix modal EEPROM dumpMohammed Shafi Shajakhan
we provide excess buffer size for 'simple_read_from_buffer' for modal EEPROM dump. This results in trailing NULL bytes at the end of EEPROM dump, fix this. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Holger Schurig <holgerschurig@googlemail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by: Holger Schurig <holgerschurig@gogglemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k_hw: apply internal regulator settings on AR933xFelix Fietkau
On AR933x, the internal regulator settings need to be applied before the PLL init to avoid stability issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-23ath9k: fix TX power reporting on AR9003 chipsGabor Juhos
The current code unconditionally reads the target power values for all modes from the EEPROM. However In 'ar9003_hw_set_power_per_rate_table' the regulatory caps are applied only on a mode specific subset of the power values. The reported TX power level is calculated from the maximum of the power values. Because some of these values are uncapped in certain cases, the reported TX power will be wrong. On the older chipset, we don't have such problems because only the mode specific subset of the power levels are retrieved from the EEPROM on those. Do the same for the AR9003 chips to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: use ath9k_hw_fbin2freq instead of FBIN2FREQGabor Juhos
The FBIN2FREQ macro and the ath9k_hw_fbin2freq function does the same thing. Remove the macro, and use the inline function instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: move ath9k_hw_fbin2freq function to eeprom.hGabor Juhos
Both eeprom.c and ar9003_eeprom.c has an indentical 'ath9k_hw_fbin2freq' function. Move the function to a common place and remove the duplicates. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17ath9k: remove unused PWRINC_*_TO_*_CHAIN definesGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: introduce ath9k_hw_get_scaled_power helperGabor Juhos
The computation of the scaled power value in various eeprom files uses identical code. Move that code into a helper function and use that instead of code duplication. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-16ath9k: use consistent value for REDUCE_SCALED_POWER_BY_THREE_CHAINGabor Juhos
The REDUCE_SCALED_POWER_BY_THREE_CHAIN symbol is defined in different eeprom files, and the value varies between the different files. In eeprom_def.c and in ar9003_eeprom.c the value of the symbol is 9, however the comments in these files indicates the value should be 10*log10(3)*2 which is 9.54242509439325. Replace the the value to 10 in these files. Also add comments to eeprom_9287.c. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: remove dead codeZefir Kurtisi
Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove AR9462 v1.0 supportSujith Manoharan
v1.0 chips are not available in the market. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04ath9k_hw: fix sparse complaint on ar9003_switch_com_spdt_get()Luis R. Rodriguez
This fixes this sparse complaint: make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/ CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: got restricted __le16 [usertype] switchcomspdt drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: expected restricted __le32 [usertype] val drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: got restricted __le16 [usertype] switchcomspdt The eep->modalHeader5G.switchcomspdt is a le16 and we return u16, so just return le16_to_cpu(). Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28ath9k_hw: Fix minimum CTL power for each runtime modeRajkumar Manoharan
The conformance test limits (CTL) for each regulatory domains (FCC/ETSI/MKK) are programmed for each runtime modes (11B,11G, HT20 and HT40) in EEPROM. The lowest ctledge power value of a particular running mode should not be used while computing ctledge power for a different running mode.(i.e 11G's min ctledge power should not be used while computing ctledge power for HT20). Currently, the code does not handle this properly which would result in incorrect txpowers in certain cases. So reset the twiceMaxEdgePower to the default while computing min ctlegepower for every mode. Cc: David Quan <dquan@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11ath9k_hw: Fix tx power settings for AR9003Rajkumar Manoharan
Retriving tx power for 2x2 and 3x3 chainmask is not handled properly. While calculating tx power for 2x2, 3 dBm was reduced and for 3x3, 5 dBm was reduced which should be added back when retriving. Cc: Paul Stewart <pstew@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11ath9k_hw: Fix channel list of CalFreqPeir for AR938xRajkumar Manoharan
This patch sync up CalFreqPeir channel list and paprd rate mask of AR938x templates to the latest received from Systems team. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11ath9k_hw: Read and configure xpa timing fieldRajkumar Manoharan
Configure xpa timing field while loading boad defaults to fix 11b CCK spur issue that was observed in EMI testing. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-11ath9k_hw: Read and configure quick drop for AR9003Rajkumar Manoharan
Read and configure quick drop feild from AR9003 eeprom inorder to help with strong signal. This patch also removes obsolate parameters ob, db_stage2, db_stage_3, db_stage4 from the eeprom templates. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14ath9k: Rename AR9480 into AR9462Rajkumar Manoharan
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: remove EEP_REG_1Felix Fietkau
It was previously used for current_rd_ext Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: clean up tx power handlingFelix Fietkau
The code for handling various restrictions concerning regulatory limits, antenna gain, etc. is very convoluted and duplicated across various EEPROM parsing implementations, making it hard to review. This patch partially cleans up the mess by unifying regulatory limit handling in one function and simplifying handling of antenna gain. It also removes unused transmit power scaling arrays from the EEPROM code, which belonged to an unimplemented API that isn't supposed to be in the driver anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-16ath9k_hw: move register definitions to header filesSenthil Balasubramanian
Move the register macros to appropriate header files to be in sync with other register definitions and also a single place to refer everything. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16ath9k_hw: Add support for AR946/8x chipsets.Senthil Balasubramanian
This patch adds support for AR946/8x chipets. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29ath9k: Fix a smatch warningsLarry Finger
Smatch shows the following warnings: CHECK drivers/net/wireless/ath/ath9k/htc_drv_main.c drivers/net/wireless/ath/ath9k/htc_drv_main.c +1315 ath9k_htc_configure_filter(27) warn: inconsistent returns mutex:&priv->mutex: locked (1303) unlocked (1315) CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +3321 ar9300_eeprom_restore_internal(20) warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC addressSenthil Balasubramanian
Due to some recent optimization done in the way the mac address bytes are written into the OTP memory, some AR9485 chipsets were forced to use the first byte from the eeprom template and the remaining bytes are read from OTP. AR9485 happens to use generic eeprom template which has 0x1 as the first byte causes issues in bringing up the card. So fixed the eeprom template accordingly to address the issue. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-08-21 06:01:04 +0000