aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/reset.c
AgeCommit message (Collapse)Author
2012-02-22ath5k:Remove __raw_read and __raw_writeJonathan Bither
By swithing from our __raw_read and __raw_write functions to ioread32 and iowrite32, benchmarks on my desk with iperf went from 11MBps to 18.1MBps using the AHB bus on an EnGenius ECB3500 running OpenWRT. Signed-off-by: Jonathan Bither <jonbither@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28ath5k: Cleanups v2 + add kerneldoc on all hw functionsNick Kossifidis
No functional changes Add kernel doc for all ath5k_hw_* functions and strcucts. Also do some cleanup, rename ath5k_hw_init_beacon to ath5k_hw_init_beacon_timers, remove an unused variable from ath5k_hw_pcu_init and a few obsolete macros, mostly related to XR. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28ath5k: Use usleep_range where possibleNick Kossifidis
Use usleep_range where possible to reduce busy waits Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath5k: clean up base.h and its usePavel Roskin
Remove unnecessary includes from base.h. Add includes to other files as necessary. Don't include base.h unless needed. Move declarations for functions in base.c from ath5k.h to base.h. Use a better named define to protect base.h against double inclusion. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath5k: eliminate CHANNEL_* macros, use AR5K_MODE_* in channel->hw_valuePavel Roskin
When checking for the band, use channel->band. Change ath5k_hw_nic_wakeup() and ath5k_channel_ok() to take ieee80211_channel. Change ath5k_hw_radio_revision() to take ieee80211_band. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath5k: remove most references to XRPavel Roskin
XR is a proprietary feature of the chipset. It's not supported and should not be supported. Signed-off-by: Pavel Roskin <proski@gnu.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-20ath5k: merge ath5k_hw and ath5k_softcPavel Roskin
Both ath5k_hw and ath5k_softc represent one instance of the hardware. This duplication is historical and is not needed anymore. Keep the name "ath5k_hw" for the merged structure and "ah" for the variable pointing to it. "ath5k_hw" is shorter than "ath5k_softc", more descriptive and more widely used. Put the combined structure to ath5k.h where the old ath5k_softc used to be. Move some code from base.h to ath5k.h as needed. Remove memory allocation for struct ath5k_hw and the corresponding error handling. Merge iobase and ah_iobase fields. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: disable 32KHz sleep clock operation by defaultFelix Fietkau
While 32 KHz sleep clock might provide some power saving benefits, it is also a major source of stability issues, on OpenWrt it produced some reproducible data bus errors on register accesses on several different MIPS platforms. All the Atheros drivers that I can find do not enable this feature, so it makes sense to leave it disabled in ath5k as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13ath5k: fix reference clock usec duration setting restoreFelix Fietkau
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling it didn't restore it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11ath5k: fix typos, bad comment formatting and GHz in place of MHzPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix formatting errors found by checkpatch.plPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: don't use volatile, it's not neededPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> The reg variable is only used by __raw_writel() and __raw_readl(), which should guarantee memory access in the right order. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: replace spaces with tabs as suggested by checkpatch.plPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17ath5k: annotate reg in ath5k_hw_nic_reset() as __iomemPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03ath5k: Disable fast channel switching by defaultNick Kossifidis
Disable fast channel change by default on AR2413/AR5413 due to some bug reports (it still works for me but it's better to be safe). Add a module parameter "fastchanswitch" in case anyone wants to enable it and play with it. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath5k: fix uninitialized var warning for txf2txsJohn W. Linville
CC [M] drivers/net/wireless/ath/ath5k/reset.o drivers/net/wireless/ath/ath5k/reset.c: In function ‘ath5k_hw_init_core_clock’: drivers/net/wireless/ath/ath5k/reset.c:100:51: warning: ‘txf2txs’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath5k: Use helper function to get eeprom mode from channelBruno Randolf
Introduce a helper function to get the EEPROM mode from channel and remove multiple similar switch statements. Also since it's now easy to get the EEPROM mode from the channel, use them inside the functions which need it, instead of passing a redundant ee_mode parameter. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath5k: Remove ATH5K_INI_RFGAIN defines, use band insteadBruno Randolf
Remove redundant defines. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22ath5k: Use pci_is_pcie()Hauke Mehrtens
Use function pci_is_pcie() instead of accessing struct member directly. CC: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Fix reset and interrupts for AHB type of devices.Felix Fietkau
On WiSoc we cannot access mac register before it is resetted. It will crash hardware otherwise. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ath5k: Check if pci pdev struct is initialized in common functions.Felix Fietkau
To be able to support other busses than PCI check if pci device structure is initialized. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Cleanup turbo channel flagsNick Kossifidis
* Clean up CHANNEL_T(URBO), use AR5K_BWMODE_40MHZ instead Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: No need to save/restore staid flags on resetNick Kossifidis
* Since we set antenna flags on phy init and ack bitrate mode on pcu init, there is no need to save/restore sta_id flags on ath5k_hw_reset. Also we don't need to re-set our mac address because it's not affected by resets. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Support synth-only channel change for AR2413/AR5413Nick Kossifidis
* Add synth-only channel change for AR2413/5413. When we call ath5k_reset with a channel ath5k_hw_reset will first try to set channel on PHY while PHY is running instead of doing a normal full reset. To do this phy_init has to change to implement this functionality. * Clean up change_channel flag, what it really did was skip PCU registers when setting initvals. This is done because on reset PCU registers are not affected (except the registers we set in pcu init and -due to hw problems- TSF). Use a new skip_pcu flag that's not misleading instead. In the future we might use that to also skip PCU reset and save us the TSF etc problems (needs testing because standard practice is to reset everything). * Use fast channel change only when setting channel, and set skip_pcu to false only on init. When we reset the card due to DMA or PHY problems skip pcu but never do a fast channel change. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Update PLL programming for turbo/half/quarterNick Kossifidis
* Set correct PLL settings for each bwmode Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Increase PHY settling parameters for turo modeNick Kossifidis
* On turbo mode increase PHY settling times, note that we only increase switch settling time on AR5212 as indicated by initvals. * A few cleanups: Move frame control settings for AR5210 from reset_tx_queue to tweak_initvals and remove phy_scal settings from tweak_initvals (we tweak them alread on set_sleep_clock). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Small cleanup on tweak_initvalsNick Kossifidis
* Now that we properly set rx/tx latencies for AR5311 remove that old buggy part of code left inside ath5k_hw_tweak_initval_settings that was never executed (you can't have an RF5112 radio on a mac older than AR5212). Also use a magic value for 5311 PHY_SCAL value. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Put core clock initialization on a new functionNick Kossifidis
* Handle all usec parameters in one function. It's much cleaner this way. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Stop PCU on resetNick Kossifidis
* Stop PCU receive logic (DRU) durring reset We need to be sure pcu is not active when trying to stop rx dma right now this is done on ath5k_reset (base.c) but later we are going to clean it up. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Add new function to stop rx/tx DMANick Kossifidis
* Add a new function to stop rx/tx dma and use in when reset starts Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Reset cleanup and generic cleanupNick Kossifidis
* No functional changes * Clean up reset: Introduce init functions for each unit and call them instead of having everything inside ath5k_hw_reset (it's just c/p for now so nothing changes except calling order -I tested it with various cards and it's ok-) * Further cleanups: ofdm_timings belongs to phy.c rate_duration belongs to pcu.c clock functions are general and belong to reset.c (more to follow) * Reorder functions for better organization: We start with helpers and other functions follow in categories, init functions are last Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05ath5k: Allow ath5k to support virtual STA and AP interfaces.Ben Greear
Support up to 4 virtual APs and as many virtual STA interfaces as desired. This patch is ported forward from a patch that Patrick McHardy did for me against 2.6.31. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25ath5k: trivial spelling fixesBob Copeland
Fix some comments: s/transmition/transmission/ s/puting/putting/ Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: clean up some commentsBob Copeland
This fixes a few misspellings, word repetitions, and some grammar nits in ath5k comments. No code changes. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: rename ath5k_hw_set_associd to _set_bssidNick Kossifidis
Although the named function also sets the aid, its main purpose is configuring the bssid and we use that everywhere else. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: no need to save/restore the default antennaBruno Randolf
Since ath5k_hw_set_antenna_mode() always writes the default antenna register and is called at the end of reset, there is no need to separately save and restore the default antenna. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-08ath5k: new function for setting the antenna switch tableBruno Randolf
Collect all pieces concering the antenna switch table into one function. Previously it was split up between ath5k_hw_reset() and ath5k_hw_commit_eeprom_settings(). Also we need to set the antenna switch table when ath5k_hw_set_antenna_mode() is called manually (by "iw phy0 antenna set", for example). I'm not sure if we need to set the switchtable at the same place in ath5k_hw_reset() as it was before - it is set later thru ath5k_hw_set_antenna_mode() anyways - but i leave it there to avoid problems(?). Plus print switchtable registers in the debugfs file. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: add sysfs files for ANI parametersBruno Randolf
/sys/class/ieee80211/phy0/device/ani/ani_mode /sys/class/ieee80211/phy0/device/ani/noise_immunity_level /sys/class/ieee80211/phy0/device/ani/spur_level /sys/class/ieee80211/phy0/device/ani/firstep_level /sys/class/ieee80211/phy0/device/ani/ofdm_weak_signal_detection /sys/class/ieee80211/phy0/device/ani/cck_weak_signal_detection /sys/class/ieee80211/phy0/device/ani/noise_immunity_level_max /sys/class/ieee80211/phy0/device/ani/spur_level_max /sys/class/ieee80211/phy0/device/ani/firstep_level_max sysfs has a lot of symlinks, so you can find the files also in other locations, like (by PCI ID) /sys/devices/pci0000:00/0000:00:11.0/ani and others. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: clarify logic when to enable spur mitigation filterBruno Randolf
The old code logically did not make sense and seems to have been confused by the fact that we could have newer EEPROMs on older hardware. In any case the spur mitigation filter was set if the srev was >= AR5K_SREV_AR5424. Spur info is available only from EEPROM versions bigger than 5.3 but but the EEPOM routines will use static values for older versions, so that should be o.k. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: remove ATH_TRACE macroBruno Randolf
Now that we have ftrace, it is not needed any more. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c
2010-03-10ath5k: remove double opmode definitionBruno Randolf
opmode (operating mode) was defined in struct ath5k_hw and struct ath5k_softc. remove it from ath5k_hw and use only from ath5k_softc (sc->opmode). (btw: what's the meaning of opmode when we have multiple interfaces?) Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: read eeprom IQ calibration values correctly for G modeBruno Randolf
we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix TSF resetBruno Randolf
to reset the TSF, AR5K_BEACON_RESET_TSF has to be 1, not 0. also we have a function for that so use it. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09ath5k: move ath5k_hw_register_timeout() into reset.cPavel Roskin
ath5k_hw_register_timeout() was duplicated between phy.c and reset.c. Since it is too big and too much used to be an inline function, move it away from the ath5k.h header into reset.c. Remove _ATH5K_RESET and _ATH5K_PHY defines. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09ath5k: remove stale function declarations, make some functions staticPavel Roskin
Remove all unnecessary function declarations from ath5k.h. Comment out unused functions. Remove ath5k_hw_get_tsf32(), which is too trivial to be commented out. Make functions static if suggested by sparse. Make ath5k_pm_ops static. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22ath5k: dont use external sleep clock in AP modeBob Copeland
When using the external sleep clock in AP mode, the TSF increments too quickly, causing beacon interval to be much lower than it is supposed to be, resulting in lots of beacon-not-ready interrupts. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14802. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath5k: Implement mac80211 callback set_coverage_classLukáš Turek
The callback sets slot time as specified in IEEE 802.11-2007 section 17.3.8.6 (for 20MHz channels only for now) and raises ACK and CTS timeouts accordingly. The values are persistent, they are restored after device reset. Signed-off-by: Lukas Turek <8an@praha12.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-28 20:53:53 +0000