aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/tg3.c
AgeCommit message (Collapse)Author
2011-04-13tg3: Automatically size stat/test string arraysMatt Carlson
This patch reimplements the size preprocessor constants of the stats and ethtool test string arrays. The size is calculated at compile time rather than using static constants. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13tg3: Dump registers when status block shows errorsMatt Carlson
This patch monitors the error bit of the status word within the status block. If it is set, the driver will dump the driver state after validating the error and then reset the chip. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13tg3: Provide full regdump on tx timeoutMatt Carlson
The current amount of information provided in the output of a tx timeout is insufficient to determine a root cause. This patch replaces the terse, four-register status output with a more complete body of information. For PCIe devices, the full register space is dumped. For other devices, select registers are dumped instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smsc911x.c
2011-04-07net: tg3: convert to hw_featuresMichał Mirosław
Cleanup hint: Some features are calculated in tg3_get_invariants() and the rest in its caller --- tg3_init_one(). This is not changed here. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: implement ethtool set_phys_idstephen hemminger
Implement control of LED via set_phys_id. Note: since PHY is powered off if device is down, this board only allows blinking if device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Support 4mb flash sizes for 5717 and 5719Matt Carlson
If a 5717 or 5719 NVRAM part is manually strapped and is 2mb in size, the driver needs to look at the NVRAM size field rather than infer it from the strapping itself. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Enable 5720 supportMatt Carlson
This patch adds the 5720 device ID to the PCI table, thus enabling 5720 support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 PHY IDMatt Carlson
This patch adds the 5720 PHY ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 H2BMC supportMatt Carlson
This patch adds support for the new Host to BMC feature. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 NVRAM decodingMatt Carlson
The 5720 implements its own NVRAM pin strapping scheme. This patch adds the required support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 ASIC revMatt Carlson
This patch adds support for the 5720 ASIC rev. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Reintroduce 5717_PLUSMatt Carlson
This patch reintroduces the TG3_FLG3_5717_PLUS to identify 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: 5717_PLUS => 57765_PLUSMatt Carlson
The 57765 arrived before the 5717 and has a subset of the features supported by the 5717. This patch renames the 5717_PLUS flag so that it can be reintroduced to designate only 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Cleanup extended rx ring size codeMatt Carlson
Hardcoded values are used in multiple places to describe the maximum rx ring sizes. This patch replaces those values with preprocessor constants. This patch also introduces a new TG3_FLG3_LRG_PROD_RING_CAP to determine if the device is capable of supporting larger ring sizes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30drivers/net: Remove IRQF_SAMPLE_RANDOM flag from network driversJavier Martinez Canillas
The IRQF_SAMPLE_RANDOM flag is marked as deprecated and will be removed. Every input point to the kernel's entropy pool have to better document the type of entropy source it is. drivers/char/random.c now implements a set of interfaces that can be used for devices to collect enviromental noise. IRQF_SAMPLE_RANDOM will be replaced with these add_*_randomness exported functions. Network drivers are not a good source of entropy. They use as a source of entropy essentially a remote host. Which means that the source of entropy can be potentially controlled by an attacker. Also, with heavy workloads the entropy decreases due to less hardware interrupts happening thanks to irq mitigation and NAPI. If a system relies in its network interface as a entropy source it has a false sense of security. Systems that don't have devices whose drivers are good sources of entropy, should either use a hardware random number generator or feed the kernel's entropy pool from userspace using other sources of entropy such as EGD, video_entropyd, timer_entropyd and audio-entropyd. Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27tg3: Fix inline keyword usageJavier Martinez Canillas
The correct usage is "static inline void" not "static void inline". Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and ↵Javier Martinez Canillas
<asm/uaccess.h> It is proper style to include linux/foo.h instead asm/foo.h if both exist Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Remove 5750 PCI codeMatt Carlson
The 5750 ASIC rev was never released as a PCI device. It only exists as a PCIe device. This patch removes the code that supports the former configuration. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Move tg3_init_link_config to tg3_phy_probeMatt Carlson
This patch moves the function that initializes the link configuration closer to the place where the rest of the phy code is initialized. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Refine VAux decision processMatt Carlson
In the near future, the VAux switching decision process is going to get more complicated. This patch refines and consolidates the existing algorithm in anticipation of the new scheme. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: cleanup pci device table varsMatt Carlson
Commit 895950c2a6565d9eefda4a38b00fa28537e39fcb, entitled "tg3: Use DEFINE_PCI_DEVICE_TABLE" moved two pci device tables into the global address space, but didn't declare them static and didn't prefix them with "tg3_". This patch fixes those problems. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Add code to verify RODATA checksum of VPDMatt Carlson
This patch adds code to verify the checksum stored in the "RV" info keyword of the RODATA VPD section. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Fix NVRAM selftestMatt Carlson
The tg3 NVRAM selftest actually fails when validating the checksum of the legacy NVRAM format. However, the test still reported success because the last update of the return code was a success from the NVRAM reads. This patch fixes the code so that the error return code defaults to a failure status. Then the patch fixes the reason why the checsum validation failed. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tg3: Add missed 5719 workaround changeMatt Carlson
Commit 2866d956fe0ad8fc8d8a7c54104ccc879b49406d, entitled "tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all revisions of the chip. There was a change that should have been a part of that patch that was missed. This patch adds the missing piece. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11tg3: Avoid setting power.can_wakeup for devices that cannot wake upRafael J. Wysocki
The tg3 driver uses device_init_wakeup() in such a way that the device's power.can_wakeup flag may be set even though the PCI subsystem cleared it before, in which case the device cannot wake up the system from sleep states. Modify the driver to only change the power.can_wakeup flag if the device is not capable of generating wakeup signals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-10tg3: Expand 5719 workaroundMatt Carlson
As a precautionary measure, expand the fix submitted in commit 4d163b75e979833979cc401ae433cb1d7743d57e entitled "tg3: Fix 5719 A0 tx completion bug" to apply to all 5719 revisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Update copyrights and update version to 3.117Matt Carlson
This patch updates copyrights and updates the tg3 version to 3.117. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix eee preprocessor namingMatt Carlson
This patch fixes a preprocessor naming bug for one of the EEE registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix EEE interoperability issueMatt Carlson
This patch fixes a problem where EEE will fail to work in certain environments. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable EEE during loopback testsMatt Carlson
EEE interferes with the hardware's ability to loop a packet back to the host. This patch disables the feature for the duration of the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable MAC loopback test for CPMU devicesMatt Carlson
On CPMU devices, the MAC loopback test does not test any important paths the phy loopback test doesn't also test. The phy loopback test is the more comprehensive test. This patch disables the MAC loopback test for these devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix loopback testsMatt Carlson
The half-duplex bit in the MAC MODE register will be set during the loopback test if the external link is in half-duplex mode. This will cause the loopback test to fail on newer devices. This patch turns the half-duplex bit off for the test. Also, newer devices fail the internal phy loopback test because the phy link takes a little while to come up. This patch adds code to wait for the link before proceeding with the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Restrict phy ioctl accessMatt Carlson
If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable multivec mode for 1 MSIX vectorMatt Carlson
For single vector MSI-X allocations, we do not want to enable multivector modes. This patch makes the necessary corrections. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Use new VLAN codeMatt Carlson
This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix 5719 A0 tx completion bugMatt Carlson
The 5719 A0 has a bug that manifests itself as if the chipset were reordering memory writes. The best known way to solve this problem is to turn off LSO and jumbo frames. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Revise 5719 internal FIFO overflow solutionMatt Carlson
Commit cf79003d598b1f82a4caa0564107283b4f560e14, entitled "tg3: Fix 5719 internal FIFO overflow problem", proposed a way to solve an internal FIFO overflow problem. We have since discovered a slightly better way to solve the problem. This patch changes the code so that the problem is contained closer to the problem source. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-01tg3: fix warningsEric Dumazet
In case CONFIG_PM_SLEEP is disabled, we dont need tg3_suspend() and tg3_resume(). drivers/net/tg3.c:15056: warning: ‘tg3_suspend’ defined but not used drivers/net/tg3.c:15110: warning: ‘tg3_resume’ defined but not used Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Michael Chan <mchan@broadcom.com> Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31tg3: fix return value check in tg3_read_vpd()David Sterba
Besides -ETIMEDOUT and -EINTR, pci_read_vpd may return other error values like -ENODEV or -EINVAL which are ignored due to the buggy check, but the data are not read from VPD anyway and this is checked subsequently with at most 3 needless loop iterations. This does not show up as a runtime bug. CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31tg3: Do not use legacy PCI power managementRafael J. Wysocki
The tg3 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. Convert tg3 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested on HP nx6325 with a NetXtreme BCM5788 adapter. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21tg3: Use DEFINE_PCI_DEVICE_TABLEJoe Perches
Moves the PCI tables to the right read-only section. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-12drivers/net: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
2010-12-06tg3: Update version to 3.116Matt Carlson
This patch updates the tg3 version to 3.116. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06tg3: Relax EEE thresholdsMatt Carlson
The hardware defaults to fairly aggressive EEE thresholds. While there appear to be no ill effects, this patch relaxes them, just as a precaution. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06tg3: Minor EEE code tweaksMatt Carlson
The first hunk of this patch makes sure that the driver checks for the appropriate preconditions before checking if EEE negotiation succeeded. More specifically the link needs to be full duplex for EEE to be enabled. The second and third hunks of this patch fix a bug where the eee advertisement register would be programmed with extra bits set. The fourth hunk of this patch makes sure the EEE capability flag is not set for 5718 A0 devices and that the device is not a serdes device. None of these modifications are strictly necessary. The driver / hardware still does the right thing. They are submitted primarily for correctness. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06tg3: Fix 57765 EEE supportMatt Carlson
EEE support in the 57765 internal phy will not enable after a phy reset unless it sees that EEE is supported in the MAC. This patch moves the code that programs the CPMU EEE registers to a place before the phy reset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06tg3: Move EEE definitions into mdio.hMatt Carlson
In commit 52b02d04c801fff51ca49ad033210846d1713253 entitled "tg3: Add EEE support", Ben Hutchings had commented that the EEE advertisement register will be in a standard location. This patch moves that definition into mdio.h and changes the code to use it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-01-05 22:57:06 +0000