aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/s2io-regs.h
AgeCommit message (Collapse)Author
2009-04-29s2io: Use generic MDIO definitionsBen Hutchings
Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-22S2io: Added napi support when MSIX is enabled.Sreenivasa Honnur
- Added napi support when MSIX is enabled. - Moved test_msi function from s2io_open to probe function. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28[S2IO]: Support for add/delete/store/restore ethernet addressesSreenivasa Honnur
- Support to add/delete/store/restore 64 and 128 Ethernet addresses for Xframe I and Xframe II respectively. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-07S2io: Check for register initialization completion before accesing device ↵Sreenivasa Honnur
registers - Making sure register initialisation is complete before proceeding further. The driver must wait until initialization is complete before attempting to access any other device registers. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-19s2io, rename BIT macroJiri Slaby
s2io, rename BIT macro BIT macro will be global definiton of (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ramkrishna Vepa <ram.vepa@neterion.com> Cc: Rastapur Santosh <santosh.rastapur@neterion.com> Cc: Sivakumar Subramani <sivakumar.subramani@neterion.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10S2io: Enable all the error and alarm indicationsSivakumar Subramani
- Added support to unmask entire set of device errors and alarams. Alarm interrupts are generated for a myriad of purposes, ranging from illegal operations or requests to internal state machine errors and uncorrectable data corruption errors. In several cases the adapter can recover gracefully from unexpected events; however, in some cases, a device reset may be necessary. This patch handles alarms generated by all the blocks within the device. The adapter generates the following types of alarms: 1. Link state transitions (local/remote fault) or other link-related problems. 2. Problems with any device peripherals, including the EEPROM, FLASH, etc. 3. Correctable ECC errors (single-bit errors) on internal data structures or frame data. 4. Uncorrectable ECC errors (multi-bit errors) on internal data structures or frame data. 5. State machine errors, which indicate that internal control structures have become corrupted. 6. PCI related errors, including parity errors or illegal transactions. 7. Other unexpected events. - Implemented Jeff's review comments to use do_s2io_write_bits function to avoid duplicate codes. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[S2IO]: Making MSIX as default intr_typeSivakumar Subramani
- Making MSIX as default intr_type - Driver will test MSI-X by issuing test MSI-X vector and if fails it will fallback to INTA Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30S2io: Mask spurious interruptsRamkrishna Vepa
- Mask single and double bit ETQ ecc errors to inhibit spurious interrupts. (Resending; Removed HTML sections in the patch) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28S2io: Remove unused variablesRamkrishna Vepa
- Remove unused variables from s2io_nic structure - Changed the memory failure printk messages to print only in debug mode - Updated the copyright messages (Resending; due to patch being corrupted) Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27S2IO: Added a loadable parameter to enable or disable vlan stripping in frame.Sivakumar Subramani
- Added code to not to strip vlan tag when driver is in promiscuous mode - Added module loadable parameter 'vlan_tag_strip" through which user can enable or disable vlan stripping irrespective of mode ( promiscuous or non-promiscuous ). Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05s2io: De-typedef driver.Ralf Baechle
Removed namespace collisions due to usage of nic_t as per Ralf's patch Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05S2IO: Fixes for reset and link handling.Sivakumar Subramani
1. Fix for reset and link handling. 2. Allow for promiscuos mode and multicast state be maintained through ifconfig up and down. 3. Support to print adapter serial number. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02[PATCH] s2io: additional statsAnanda Raju
Hi, This patch contains additional statistics counters added to s2io driver these statistics are very much usefull in debugging the driver. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02[PATCH] s2io: performance improvementsAnanda Raju
hi, This patch contains all the changes that were done to improve performance of s2io driver. one line description of the changes are 1. For Non NAPI case the rx interrupt handler is being called unconditionally 2. code optimization and adding prefetch skb->data 3. Remove modulo operations in fast path 4. Enable Group Reads and set backoff interval to 0x1000 5. correct PIC_CNTL_SHARED_SPLITS macro definition, and reduce pause parameter 6. Corrected logic of identifying rx buffer level in rx_buffer_level() 7. fix DMA map and unmap done with different sizes in 1-buf mode 8. Removed forcible disabling of ERO 9. Send up the packets with transfer code = 0x5 Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2005-10-18[PATCH] S2io: Offline diagnostics fixesravinandan.arakali@neterion.com
This patch fixes the following bugs with offline diagnostics code(run with "ethtool -t"). 1. After running offline diagnostics, adapter would report corrupted packets on receive. This was because of adapter not being brought out of "RLDRAM test mode". 2. Current EEPROM test works only for Xframe I. Since Xframe II uses different interface(SPI), support for this interface has been added. Also, since SPI supports write access to all areas of EEPROM, negative testing is done only for Xframe I. 3. Return values from subfunctions of offline diagnostics have been corrected. 4. In register test, expected value from rx_queue_cfg register is made to depend on adapter type. 5. After the test, need to restore values at EEPROM offsets 0x4F0 and 0x7F0. These locations were modified as part of test. 6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl register. Also, couple of unnecessary writes to mc_rldram_test_ctrl have been removed. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-06[PATCH] S2io: Hardware and miscellaneous fixesravinandan.arakali@neterion.com
Hi, This patch contains the following hardware related fixes and other miscellaneous bug fixes. 1. Updated the definition of single and double-bit ECC errors 2. Earlier we were allocating Transmit descriptors equal to MAX_SKB_FRAGS. This was causing a boundary condition failure. Need to allocate MAX_SKB_FRAGS+1 descriptors. 3. On some platforms(like PPC), pci_alloc_consistent() can return a zero DMA address. Since the NIC cannot handle zero-addresses, a workaround has been provided. Basically, we don't use such that page. We reallocate. 4. If list_info allocation failed during driver load, check for it during driver exit and return instead of trying to dereference NULL pointer. 5. Increase the debug level of few non-critical debug messages. 6. Reset the card on critical ECC double errors only in case of XframeI since XframeII can recover from such errors. 7. Print copyright message on driver load. 8. Bumped up the driver version no. to 2.0.8.1 Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] S2io: New link handling scheme for Xframe IIraghavendra.koushik@neterion.com
Hi, The below patch implements a new "Link state change handling" scheme supported by the Xframe II adapter. It also bumps up the driver version to 2.0.2.0. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] S2io: Support for Xframe II NICraghavendra.koushik@neterion.com
Hi, This patch provides basic support for the Xframe II adapter. Includes the following changes: 1. New values to program XAUI interface. 2. Print the PCI/PCI-X mode(bus frequency, width). 3. Remove EOI from reset during intialization. 4. Enable all 8 PCCs if Xframe II adapter. 5. Programs the RLDRAM size depending on the device. (Note: RLDRAM size on XFARME-I is 64Mb whereas on XFRAME-II it's 32 Mb). 6. Enable extended(64-bit) statistics counters. 7. Program timer interrupt duration based on PCI/PCI-X clock speed. 8. Not required to save/restore PCI config space before/after reset. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] S2io: Hardware fixesraghavendra.koushik@neterion.com
Hi, Below patch addresses few h/w specific issues. 1. Check for additional ownership bit on Rx path before starting Rx processing. 2. Enable only 4 PCCs(Per Context Controller) for Xframe I revisions less than 4. 3. Program Rx and Tx round robin registers depending on no. of rings/FIFOs. 4. Tx continous interrupts is now a loadable parameter. 5. Reset the card if we get double-bit ECC errors. 6. A soft reset of XGXS being done to force a link state change has been eliminated. 7. After a reset, clear "parity error detected" bit, PCI-X ECC status register, and PCI_STATUS bit in tx_pic_int register. 8. The error in the disabling allmulticast implementation has been rectified. 9. Leave the PCI-X parameters MMRBC, OST etc. at their BIOS/system defaults. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[PATCH] S2io: Code cleanupraghavendra.koushik@neterion.com
Hi, We are submitting a series of 13 patches to support our Xframe I and Xframe II line of products. The patches can be categorized as follows: Patches 1-8 : Changes applicable to both Xframe I and II Patches 9-11: Xframe II specific features Patch 12: Addresses issues found during testing cycle. Patch 13: Incorpoates mostly the review comments from community and some last moment bug fixes. Please review the patches and let us know your comments. Starting with patch 1 below. This patch involves cosmetic changes(tabs and indentation, regrouping of transmit and receive data structures, typecasting, code cleanup). Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!