aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2012-01-03net: fsl: fec: fix build for mx23-only kernelWolfram Sang
If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30skge: restore rx multicast filter on resume and after config changesFlorian Zumbiehl
Restore skge hardware registers for multicast filtering to their appropriate values after system resume and after hardware restarts that are done when changing certain settings. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30mlx4_en: nullify cq->vector field when closing completion queueYevgeny Petrilin
Caused loss of connectivity when changing ring size. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19davinci-cpdma: fix locking issue in cpdma_chan_stopIlya Yanok
Free the channel lock before calling __cpdma_chan_process to prevent dead lock. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19r8169: fix Config2 MSIEnable bit setting.françois romieu
The MSIEnable bit is only available for the 8169. Avoid Config2 writes for the post-8169 8168 and 810x. Reported-by: Su Kang Yin <cantona@cantona.net> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: Check dest prefix length on original route not copied one in rt6_alloc_cow(). sch_gred: should not use GFP_KERNEL while holding a spinlock ipip, sit: copy parms.name after register_netdevice ipv6: Fix for adding multicast route for loopback device automatically. ssb: fix init regression with SoCs rtl8192{ce,cu,de,se}: avoid problems because of possible ERFOFF -> ERFSLEEP transition mac80211: fix another race in aggregation start fsl_pq_mdio: Clean up tbi address configuration ppp: fix pptp double release_sock in pptp_bind() net/fec: fix the use of pdev->id ath9k: fix check for antenna diversity support batman-adv: delete global entry in case of roaming batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM Bluetooth: Correct version check in hci_setup btusb: fix a memory leak in btusb_send_frame() Bluetooth: bnep: Fix module reference Bluetooth: cmtp: Fix module reference Bluetooth: btmrvl: support Marvell Bluetooth device SD8797
2011-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: use new generic {enable,disable}_percpu_irq() routines drivers/net/ethernet/tile: use skb_frag_page() API asm-generic/unistd.h: support new process_vm_{readv,write} syscalls arch/tile: fix double-free bug in homecache_free_pages() arch/tile: add a few #includes and an EXPORT to catch up with kernel changes.
2011-12-07fsl_pq_mdio: Clean up tbi address configurationAndy Fleming
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07net/fec: fix the use of pdev->idShawn Guo
The pdev->id is used in several places for different purpose. All these uses assume it's always the id of fec device which is >= 0. However this is only true for non-DT case. When DT plays, pdev->id is always -1, which will break these pdev->id users. Instead of fixing all these users one by one, this patch introduces a new member 'dev_id' to 'struct fec_enet_private' for holding the correct fec device id, and replaces all the existing uses of pdev->id with this dev_id. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06pasemi_mac: Fix building as moduleBen Hutchings
Commit ded19addf9c937d83b9bfb4d73a836732569041b ('pasemic_mac*: Move the PA Semi driver') inadvertently split pasemi_mac into two separate modules with unresolved symbols. Change it back into a single module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.françois romieu
Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up resetting Rx and Tx indexes and thus racing with the NAPI handler via -> rtl8169_hw_reset -> rtl_hw_reset -> rtl8169_init_ring_indexes What about returning to the original state ? rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one. The latter does not need rtl8169_init_ring_indexes because the indexes still contain their original values from the newly allocated network device private data area (i.e. 0). rtl8169_hw_reset is used by: 1. rtl8169_down Helper for rtl8169_close. rtl8169_open explicitely inits the indexes anyway. 2. rtl8169_pcierr_interrupt Indexes are set by rtl8169_reinit_task. 3. rtl8169_interrupt rtl8169_hw_reset is needed when the device goes down. See 1. 4. rtl_shutdown System shutdown handler. Indexes are irrelevant. 5. rtl8169_reset_task Indexes must be set before rtl_hw_start is called. 6. rtl8169_tx_timeout Indexes should not be set. This is the job of rtl8169_reset_task anyway. The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in rtl8169_reset_task do not change the analysis. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05r8169: Rx FIFO overflow fixes.françois romieu
Realtek has specified that the post 8168c gigabit chips and the post 8105e fast ethernet chips recover automatically from a Rx FIFO overflow. The driver does not need to clear the RxFIFOOver bit of IntrStatus and it should rather avoid messing it. The implementation deserves some explanation: 1. events outside of the intr_event bit mask are now ignored. It enforces a no-processing policy for the events that either should not be there or should be ignored. 2. RxFIFOOver was already ignored in rtl_cfg_infos[RTL_CFG_1] for the whole 8168 line of chips with two exceptions: - RTL_GIGA_MAC_VER_22 since b5ba6d12bdac21bc0620a5089e0f24e362645efd ("use RxFIFO overflow workaround for 8168c chipset."). This one should now be correctly handled. - RTL_GIGA_MAC_VER_11 (8168b) which requires a different Rx FIFO overflow processing. Though it does not conform to Realtek suggestion above, the updated driver includes no change for RTL_GIGA_MAC_VER_12 and RTL_GIGA_MAC_VER_17. Both are 8168b. RTL_GIGA_MAC_VER_12 is common and a bit old so I'd rather wait for experimental evidence that the change suggested by Realtek really helps or does not hurt in unexpected ways. Removed case statements in rtl8169_interrupt are only 8168 relevant. 3. RxFIFOOver is masked for post 8105e 810x chips, namely the sole 8105e (RTL_GIGA_MAC_VER_30) itself. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03arch/tile: use new generic {enable,disable}_percpu_irq() routinesChris Metcalf
We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-12-03drivers/net/ethernet/tile: use skb_frag_page() APIChris Metcalf
This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net>
2011-11-30net: fec: Select the FEC driver by default for i.MX SoCsFabio Estevam
Since commit 230dec6 (net/fec: add imx6q enet support) the FEC driver is no longer built by default for i.MX SoCs. Let the FEC driver be built by default again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27jme: PHY configuration for compatible issueAries Lee
To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee <AriesLee@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26dm9000: Fix check for disabled wake on LANMark Brown
We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23ehea: Use round_jiffies_relative to align workqueueAnton Blanchard
Use round_jiffies_relative to align the ehea workqueue and avoid extra wakeups. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23ehea: Reduce memory usage in buffer poolsAnton Blanchard
Now that we enable multiqueue by default the ehea driver is using quite a lot of memory for its buffer pools. With 4 queues we consume 64MB in the jumbo packet ring, 16MB in the medium packet ring and 16MB in the tiny packet ring. We should only fill the jumbo ring once the MTU is increased but for now halve it's size so it consumes 32MB. Also reduce the tiny packet ring, with 4 queues we had 16k entries which is overkill. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23qlge: fix size of external list for TX address descriptorsThadeu Lima de Souza Cascardo
When transmiting a fragmented skb, qlge fills a descriptor with the fragment addresses, after DMA-mapping them. If there are more than eight fragments, it will use the eighth descriptor as a pointer to an external list. After mapping this external list, called OAL to a structure containing more descriptors, it fills it with the extra fragments. However, considering that systems with pages larger than 8KiB would have less than 8 fragments, which was true before commit a715dea3c8e, it defined a macro for the OAL size as 0 in those cases. Now, if a skb with more than 8 fragments (counting skb->data as one fragment), this would start overwriting the list of addresses already mapped and would make the driver fail to properly unmap the right addresses on architectures with pages larger than 8KiB. Besides that, the list of mappings was one size too small, since it must have a mapping for the maxinum number of skb fragments plus one for skb->data and another for the OAL. So, even on architectures with page sizes 4KiB and 8KiB, a skb with the maximum number of fragments would make the driver overwrite its counter for the number of mappings, which, again, would make it fail to unmap the mapped DMA addresses. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23bnx2x: Fix 5461x LEDYaniv Rosner
Fix port identify test on 5461x PHY by driving LEDs through MDIO. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23b44: Use dev_kfree_skb_irq() in b44_tx()Xander Hover
Reported issues when using dev_kfree_skb() on UP systems and systems with low numbers of cores. dev_kfree_skb_irq() will properly save IRQ state before freeing the skb. Tested on 3.1.1 and 3.2_rc2 Example of reproducible trace of kernel 3.1.1 ------------[ cut here ]------------ WARNING: at kernel/softirq.c:159 local_bh_enable+0x32/0x79() ... Pid: 0, comm: swapper Not tainted 3.1.1-gentoo #1 Call Trace: [<c1022970>] warn_slowpath_common+0x65/0x7a [<c102699e>] ? local_bh_enable+0x32/0x79 [<c1022994>] warn_slowpath_null+0xf/0x13 [<c102699e>] local_bh_enable+0x32/0x79 [<c134bfd8>] destroy_conntrack+0x7c/0x9b [<c134890b>] nf_conntrack_destroy+0x1f/0x26 [<c132e3a6>] skb_release_head_state+0x74/0x83 [<c132e286>] __kfree_skb+0xb/0x6b [<c132e30a>] consume_skb+0x24/0x26 [<c127c925>] b44_poll+0xaa/0x449 [<c1333ca1>] net_rx_action+0x3f/0xea [<c1026a44>] __do_softirq+0x5f/0xd5 [<c10269e5>] ? local_bh_enable+0x79/0x79 <IRQ> [<c1026c32>] ? irq_exit+0x34/0x8d [<c1003628>] ? do_IRQ+0x74/0x87 [<c13f5329>] ? common_interrupt+0x29/0x30 [<c1006e18>] ? default_idle+0x29/0x3e [<c10015a7>] ? cpu_idle+0x2f/0x5d [<c13e91c5>] ? rest_init+0x79/0x7b [<c15c66a9>] ? start_kernel+0x297/0x29c [<c15c60b0>] ? i386_start_kernel+0xb0/0xb7 ---[ end trace 583f33bb1aa207a9 ]--- Signed-off-by: Xander Hover <LKML@hover.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21stmmac: mask mmc interruptsGiuseppe CAVALLARO
We need to mask the MMC irq otherwise if we raise the mmc interrupts that are not handled the driver loops in the handler. In fact, by default all mmc counters (only used for stats) are managed in SW and registers are cleared on each READ. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21iseries_veth: Fix wrong parameter given to sizeof callThomas Jarosch
"remote_list" is of type struct dma_chunk remote_list[VETH_MAX_FRAMES_PER_MSG]; Probably a copy'n'paste error. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17sky2: fix hang in napi_disablestephen hemminger
If IRQ was never initialized, then calling napi_disable() would hang. Add more bookkeeping to track whether IRQ was ever initialized. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17sky2: enforce minimum ring sizestephen hemminger
The hardware has a restriction that the minimum ring size possible is 128. The number of elements used is controlled by tx_pending and the overall number of elements in the ring tx_ring_size, therefore it is okay to limit the number of elements in use to a small value (63) but still provide a bigger ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: fix pm functions avoiding sleep on spinlockFrancesco Virlinzi
This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: remove spin_lock in stmmac_ioctl.Srinivas Kandagatla
This patch removes un-needed spin_lock in stmmac_ioctl while reading and writing mdio registers. While holding spin_lock the code must be atomic, which is not true in this case as both mdiobus_read and writes have mutex locks. Without this patch reading mdio registers via mii-tool results in below BUG: mii-tool -vvv eth0" Using SIOCGMIIPHY=0x8947 BUG: sleeping function called from invalid context at kernel/mutex.c:287 in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool 2 locks held by mii-tool/614: #0: (rtnl_mutex){......}, at: [<c01fd80c>] dev_ioctl+0x550/0x674 #1: (&priv->lock){......}, at: [<c01b34ec>] stmmac_ioctl+0x4c/0x78 [<c002ea14>] (unwind_backtrace+0x0/0xcc) from [<c0272c38>] (mutex_lock_nested+0x24/0x35c) [<c0272c38>] (mutex_lock_nested+0x24/0x35c) from [<c01b237c>] (mdiobus_read+0x44/0x70) [<c01b237c>] (mdiobus_read+0x44/0x70) from [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) from [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) from [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) from [<c01fd81c>] (dev_ioctl+0x560/0x674) [<c01fd81c>] (dev_ioctl+0x560/0x674) from [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) from [<c00c4130>] (do_vfs_ioctl+0x530/0x578) [<c00c4130>] (do_vfs_ioctl+0x530/0x578) from [<c00c41ac>] (sys_ioctl+0x34/0x54) [<c00c41ac>] (sys_ioctl+0x34/0x54) from [<c0028aa0>] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: parameters auto-tuning through HW cap regGiuseppe CAVALLARO
New GMAC devices (newer than the databook 3.50a) have the HW capability register that provides which features are actually supported by the hardware. On old devices many information have to be passed through the platform, for example: enhanced descriptor structure, TX COE etc. These are mandatory to properly configure the driver. This remains still valid because the driver has to support old Synopsys devices but now it's also able to override them using the values from the HW capability register if supported. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: fix advertising 1000Base capabilties for non GMII ifaceSrinivas Kandagatla
This patch fixes the way to stop the 1000Base advertising capabilties for non GMII interfaces. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17stmmac: use mdelay on timeout of sw resetFrancesco Virlinzi
This patch uses an mdelay to manage the timeout on sw reset to be independant of cpu_clk. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: version 1.30stephen hemminger
Update version number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: used fixed RSS keystephen hemminger
Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: reduce default Tx ring sizestephen hemminger
The default Tx ring size for the sky2 driver is quite large and could cause excess buffer bloat for many users. The minimum ring size possible and still allow handling the worst case packet on 64bit platforms is 38 which gets rounded up to a power of 2. But most packets only require a couple of ring elements. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: rename up/down functionsstephen hemminger
The code is clearer if the up/down functions are renamed to open/close like other drivers. Purely syntax change. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: pci posting issuesstephen hemminger
A couple of the reset and setup paths have possible PCI posting issues. When setting registers, a read is necessary to force the writes to complete. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16sky2: fix hang on shutdown (and other irq issues)stephen hemminger
There are several problems with recent change to how IRQ's are setup. * synchronize_irq in sky2_shutdown would hang because there was no IRQ setup. * when device was set to down, some IRQ bits left enabled so a hardware error would produce IRQ with no handler * quick link on Optima chip set was enabled without handler * suspend/resume would leave IRQ on with no handler if device was down Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16r6040: fix check against MCRO_HASHEN bit in r6040_multicast_listFlorian Fainelli
We are checking whether the MCR0_HASHEN bit is set using a logical and instead of bitwise and, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16pch_gbe: Move #include of module.hJoe Perches
The first #include must be pch_gbe.h as it does a #define of pr_fmt. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16bnx2x: cache-in compressed fw imageDmitry Kravkov
Re-request fw from fs may fail for different reasons, once the fw was loaded we won't release it until driver is removed. This also resolves the boot problem when initial fw is located on initrd, but rootfs is still unavailable, in this case device reset will fail due to absence of fw files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net/cadence: enable by default NET_ATMELJean-Christophe PLAGNIOL-VILLARD
so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14NET: MIPS: lantiq: fix etop compile errorJohn Crispin
The Lantiq ETOP ethernet driver fails to build in 3.2-rc1 due to 2 missing header files. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14mlx4_en: Remove FCS bytes from packet length.Yevgeny Petrilin
When HW doesn't remove FCS bytes they are reported in the completion byte count, we don't need to take them to skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net/smsc911x: Always wait for the chip to be readyRobert Marklund
Wait for the chip to be ready before any access to it. On the Snowball platform we need to enable an external regulator before the chip comes online, and then it happens that the device is not yet ready at probe time, so let's wait for it. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14forcedeth: fix stats on hardware without extended stats supportdavid decotigny
This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163b2) - "forcedeth: Improve stats counters" (0bdfea8ba8) - "forcedeth: remove unneeded stats updates" (4687f3f364) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09net/ll_temac: FIX : Wait for indirect wait to endRicardo Ribalda
While tracing down a connectivity problem on the temac I connected a probe to the Cross bar irq, and it was triggered when doing ifdown->ifup. This is fixed once waiting for the indirect write to end. Since it is not on the hot path there is no performance loss. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09net/temac: FIX segfault when process old irqsRicardo Ribalda
Do not enable the irq until the scatter gather registers are ready to handle the data. Otherwise an irq from a packet send/received before last close can lead to an access to an invalid memory region on the irq handler. Also, stop the dma engine on close. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sunhme: Allow usage on SBI based SBus systemsoftedal
To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08r8169: increase the delay parameter of pm_schedule_suspendhayeswang
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 20:44:29 +0000