aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2013-01-11can: Do not call dev_put if restart timer is running upon closeAlexander Stein
commit ab48b03ec9ae1840a1e427e2375bd0d9d554b4ed upstream. If the restart timer is running due to BUS-OFF and the device is disconnected an dev_put will decrease the usage counter to -1 thus blocking the interface removal, resulting in the following dmesg lines repeating every 10s: can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 can: notifier: receive list not found for dev can0 unregister_netdevice: waiting for can0 to become free. Usage count = -1 Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26can: peak_usb: fix hwtstamp assignmentOliver Hartkopp
The skb->tstamp is set to the hardware timestamp when available in the USB urb message. This leads to user visible timestamps which contain the 'uptime' of the USB adapter - and not the usual system generated timestamp. Fix this wrong assignment by applying the available hardware timestamp to the skb_shared_hwtstamps data structure - which is intended for this purpose. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-24can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boardsStephane Grosjean
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23can: flexcan: disable bus error interrupts for the i.MX6qWolfgang Grandegger
This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang <jason77.wang@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking changes from David Miller: "The most important bit in here is the fix for input route caching from Eric Dumazet, it's a shame we couldn't fully analyze this in time for 3.6 as it's a 3.6 regression introduced by the routing cache removal. Anyways, will send quickly to -stable after you pull this in. Other changes of note: 1) Fix lockdep splats in team and bonding, from Eric Dumazet. 2) IPV6 adds link local route even when there is no link local address, from Nicolas Dichtel. 3) Fix ixgbe PTP implementation, from Jacob Keller. 4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya. 5) MAC length computed improperly in VLAN demux, from Antonio Quartulli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt Remove noisy printks from llcp_sock_connect tipc: prevent dropped connections due to rcvbuf overflow silence some noisy printks in irda team: set qdisc_tx_busylock to avoid LOCKDEP splat bonding: set qdisc_tx_busylock to avoid LOCKDEP splat sctp: check src addr when processing SACK to update transport state sctp: fix a typo in prototype of __sctp_rcv_lookup() ipv4: add a fib_type to fib_info can: mpc5xxx_can: fix section type conflict can: peak_pcmcia: fix error return code can: peak_pci: fix error return code cxgb4: Fix build error due to missing linux/vmalloc.h include. bnx2x: fix ring size for 10G functions cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params() ixgbe: add support for X540-AT1 ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit ixgbe: fix PTP ethtool timestamping function ixgbe: (PTP) Fix PPS interrupt code ixgbe: Fix PTP X540 SDP alignment code for PPS signal ...
2012-10-06sections: fix section conflicts in drivers/netAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04can: mpc5xxx_can: fix section type conflictMarc Kleine-Budde
Since commit: 6d99c4c can: mpc5xxx_can: make data used as *of_device_id.data const both "struct mpc5xxx_can_data mpc5200_can_data" and "mpc5121_can_data" are marked as "const" but also as "__devinitdata". This leads to the following compile error: drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict This patch changes the "__devinitdata" to "__devinitconst" and marks the "struct of_device_id mpc5xxx_can_table" as "const" and "__devinitconst", too. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-04can: peak_pcmcia: fix error return codePeter Senna Tschudin
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-04can: peak_pci: fix error return codePeter Senna Tschudin
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-01Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-10-01flexcan: disable bus error interrupts for the i.MX28Wolfgang Grandegger
Due to a bug in most Flexcan cores, the bus error interrupt needs to be enabled. Otherwise we don't get any error warning or passive interrupts. This is _not_ necessary for the i.MX28 and this patch disables bus error interrupts if "berr-reporting" is not requested. This avoids bus error flooding, which might harm, especially on low-end systems. To handle such quirks of the Flexcan cores, a hardware feature flag has been introduced, also replacing the "hw_ver" variable. So far nobody could tell what Flexcan core version is available on what Freescale SOC, apart from the i.MX6Q and P1010, and which bugs or features are present on the various "hw_rev". CC: Hui Wang <jason77.wang@gmail.com> CC: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this pull request is for net-next, for the v3.7 release cycle. AnilKumar Ch contributed a fix for a segfault in the c_can driver, which is triggered by an earlier commit [1] in net-next (so no backport is needed). ... [1] 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27can: c_can: fix segfault during rmmodAnilKumar Ch
This patch fixes an oops which occurs during unloading the driver. unregister_c_can_dev() is doing c_can/d_can module interrupts disable, which requires module clock enable. c_can/d_can interrupts enable/disable is handled properly in c_can_start and c_can_stop, so removing from unregister_c_can_dev(). The problem was triggered by adding runtime PM support to the c_can driver by this commit: 4cdd34b can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-22can: sja1000: Add support for listen-only mode and one-shot modeAndreas Larsson
One-shot mode uses the TCS bit of the status register to discern whether a transmission was successful or not. On a failed transmission, the frame is not echoed back. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21Merge branch 'v3.7-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical A few non-critical fixes/cleanups for samsung platforms. * 'v3.7-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name + sync to 3.6-rc6
2012-09-21can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Cc: stable <stable@vger.kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: usb: peak: rename peak_usb dump_mem functionRandy Dunlap
Rename generic-sounding function dump_mem() to pcan_dump_mem() so that it does not conflict with the dump_mem() function in arch/sh/include/asm/kdebug.h. drivers/net/can/usb/peak_usb/pcan_usb_core.c: error: conflicting types for 'dump_mem': => 56:6 drivers/net/can/usb/peak_usb/pcan_usb_core.h: error: conflicting types for 'dump_mem': => 134:6 Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> [mkl: convert all users of dump_mem(), too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Adopt pinctrl supportAnilKumar Ch
Adopt pinctrl support to c_can driver based on c_can device pointer, pinctrl driver configure SoC pins to d_can mode according to definitions provided in .dts file. In device specific device tree file 'pinctrl-names = "default";' and 'pinctrl-0 = <&d_can1_pins>;' needs to add to configure pins from c_can driver. d_can1_pins node contains the pinmux/config details of d_can L/H pins. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add d_can suspend resume supportAnilKumar Ch
Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controllerAnilKumar Ch
Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM APIs control clocks for C_CAN/D_CAN IP and prevent access to the register of C_CAN/D_CAN IP when clock is turned off. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Add device tree support to Bosch C_CAN/D_CAN controllerAnilKumar Ch
Add device tree support to C_CAN/D_CAN controller and usage details are added to device tree documentation. Driver was tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> For the of binding doc: Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: c_can: Modify c_can device namesAnilKumar Ch
Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make use of same names for array indexes in c_can_id_table[] as well as device names. This patch also add indexes to c_can_id_table array. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: ti_hecc: fix oops during rmmodMarc Kleine-Budde
This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [<bf00c768>] lr : [<c033be58>] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [<bf00c768>] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [<c033be58>] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [<c033c098>] (rollback_registered_many+0xc0/0x2a0) from [<c033c2f8>] (rollback_registered+0x20/0x30) [ 172.994750] [<c033c2f8>] (rollback_registered+0x20/0x30) from [<c033c370>] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [<c033c370>] (unregister_netdevice_queue+0x68/0x98) from [<c033c3b8>] (unregister_netdev+0x18/0x20) [ 173.015899] [<c033c3b8>] (unregister_netdev+0x18/0x20) from [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [<c02842dc>] (platform_drv_remove+0x14/0x18) [ 173.036712] [<c02842dc>] (platform_drv_remove+0x14/0x18) from [<c0282f90>] (__device_release_driver+0x7c/0xbc) Cc: stable <stable@vger.kernel.org> Cc: Anant Gole <anantgole@ti.com> Tested-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: janz-ican3: fix support for older hardware revisionsIra W. Snyder
The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable <stable@vger.kernel.org> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-11can: mpc5xxx_can: make data used as *of_device_id.data constArnd Bergmann
Since of_device_id.data is declared as a pointer to const data a few more consts can be added in this driver. [ukl: split Arnd's patch by driver] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-03can: mcp251x: avoid repeated frame bugBenoît Locher
The MCP2515 has a silicon bug causing repeated frame transmission, see section 5 of MCP2515 Rev. B Silicon Errata Revision G (March 2007). Basically, setting TXBnCTRL.TXREQ in either SPI mode (00 or 11) will eventually cause the bug. The workaround proposed by Microchip is to use mode 00 and send a RTS command on the SPI bus to initiate the transmission. Cc: <stable@vger.kernel.org> Signed-off-by: Benoît Locher <Benoit.Locher@skf.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-08-24can: sja1000_platform: fix wrong flag IRQF_SHARED for interrupt sharingSven Schmitt
The sja1000 platform driver wrongly assumes that a shared IRQ is indicated with the IRQF_SHARED flag in irq resource flags. This patch changes the driver to handle the correct flag IORESOURCE_IRQ_SHAREABLE instead. There are no mainline users of the platform driver which wrongly make use of IRQF_SHARED. Signed-off-by: Sven Schmitt <sven.schmitt@volkswagen.de> Acked-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-08-24can: softing: Fix potential memory leak in softing_load_fw()Alexey Khoroshilov
Do not leak memory by updating pointer with potentially NULL realloc return value. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-30net/c_can: remove conditional compilation of clk codeViresh Kumar
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-20can: janz-ican3: add support for one shot modeIra W. Snyder
The Janz VMOD-ICAN3 hardware has support for one shot packet transmission. This means that a packet will be attempted to be sent once, with no automatic retries. The SocketCAN core has a controller-wide setting for this mode: CAN_CTRLMODE_ONE_SHOT. The Janz VMOD-ICAN3 hardware supports this flag on a per-packet level, but the SocketCAN core does not. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: avoid firmware lockup caused by infinite bus error quotaIra W. Snyder
If the bus error quota is set to infinite and the host CPU cannot keep up, the Janz VMOD-ICAN3 firmware will stop responding to control messages until the controller is reset. The firmware will automatically stop sending bus error messages when the quota is reached, and will only resume sending bus error messages when the quota is re-set to a positive value. This limitation is worked around by setting the bus error quota to one message, and then re-setting the quota to one message every time a bus error message is received. By doing this, the firmware never stops responding to control messages. The CAN bus can be reset without a hard-reset of the controller card. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: fix support for CAN_RAW_RECV_OWN_MSGSIra W. Snyder
The Janz VMOD-ICAN3 firmware does not support any sort of TX-done notification or interrupt. The driver previously used the hardware loopback to attempt to work around this deficiency, but this caused all sockets to receive all messages, even if CAN_RAW_RECV_OWN_MSGS is off. Using the new function ican3_cmp_echo_skb(), we can drop the loopback messages and return the original skbs. This fixes the issues with CAN_RAW_RECV_OWN_MSGS. A private skb queue is used to store the echo skbs. This avoids the need for any index management. Due to a lack of TX-error interrupts, bus errors are permanently enabled, and are used as a TX-error notification. This is used to drop an echo skb when transmission fails. Bus error packets are not generated if the user has not enabled bus error reporting. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: fix error and byte countersIra W. Snyder
The error and byte counter statistics were being incremented incorrectly. For example, a TX error would be counted both in tx_errors and rx_errors. This corrects the problem so that tx_errors and rx_errors are only incremented for errors caused by packets sent to the bus. Error packets generated by the driver are not counted. The byte counters are only increased for packets which are actually transmitted or received from the bus. Error packets generated by the driver are not counted. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: cleanup of ican3_to_can_frame and can_frame_to_ican3Marc Kleine-Budde
This patch cleans up the ICAN3 to Linux CAN frame and vice versa conversion functions: - RX: Use get_can_dlc() to limit the dlc value. - RX+TX: Don't copy the whole frame, only copy the amount of bytes specified in cf->can_dlc. Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Tested-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: drop invalid skbsIra W. Snyder
The commit which added the janz-ican3 driver and commit 3ccd4c61 "can: Unify droping of invalid tx skbs and netdev stats" were committed into mainline Linux during the same merge window. Therefore, the addition of this code to the janz-ican3 driver was forgotten. This patch adds the expected code. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: janz-ican3: remove dead codeIra W. Snyder
The code which used this variable was removed during review, before the driver was added to mainline Linux. It is now dead code, and can be removed. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: flexcan: add 2nd clock to support imx53 and newerSteffen Trumtrar
This patch adds support for a second clock to the flexcan driver. On modern freescale ARM cores like the imx53 and imx6q two clocks ("ipg" and "per") must be enabled in order to access the CAN core. In the original driver, the clock was requested without specifying the connection id, further all mainline ARM archs with flexcan support (imx28, imx25, imx35) register their flexcan clock without a connection id, too. This patch first renames the existing clk variable to clk_ipg and converts it to devm for easier error handling. The connection id "ipg" is added to the devm_clk_get() call. Then a second clock "per" is requested. As all archs don't specify a connection id, both clk_get return the same clock. This ensures compatibility to existing flexcan support and adds support for imx53 at the same time. After this patch hits mainline, the archs may give their existing flexcan clock the "ipg" connection id and implement a dummy "per" clock. This patch has been tested on imx28 (unmodified clk tree) and on imx53 with a seperate "ipg" and "per" clock. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-20can: mark bittiming_const pointer in struct can_priv as constMarc Kleine-Budde
This patch marks the bittiming_const pointer as in the struct can_pric as "const". This allows us to mark the struct can_bittiming_const in the CAN drivers as "const", too. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-17can: softing: softing_main: ensure a consistent return value in error caseJulia Lawall
Typically, the return value desired for the failure of a function with an integer return value is a negative integer. In these cases, the return value is sometimes a negative integer and sometimes 0, due to a subsequent initialization of the return variable within the loop. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) //<smpl> @r exists@ identifier ret; position p; constant C; expression e1,e3,e4; statement S; @@ ret = -C ... when != ret = e3 when any if@p (...) S ... when any if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; } ... when != ret = e3 when any *if@p (...) { ... when != ret = e4 return ret; } //</smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-17can: mpc5xxx_can: make data in mpc5xxx_can_probe constMarc Kleine-Budde
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-17can: flexcan: make flexcan_priv.devtype_data member point to const dataMarc Kleine-Budde
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-03can: flexcan: add hardware controller version supportHui Wang
At least in the i.MX series, the flexcan contrller divides into ver_3 and ver_10, current driver is for ver_3 controller. i.MX6 has ver_10 controller, it has more reigsters than ver_3 has. The rxfgmask (Rx FIFO Global Mask) register is one of the new added. Its reset value is 0xffffffff, this means ID Filter Table must be checked when receive a packet, but the driver is designed to accept everything during the chip start, we need to clear this register to follow this design. Use the data entry of the struct of_device_id to point chip specific info, we can set hardware version for each platform. Cc: linux-can@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> [mkl: add id_table support] Tested-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-02can: flexcan: use of_property_read_u32 to get DT entry valueHui Wang
of_property_read_u32() can auto handle endian problems, use this function can make code clean and simple. No need to check return value here since the following got value check will handle this. Cc: linux-can@vger.kernel.org Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-02can: dev: fix sparse warning for can_restartMarc Kleine-Budde
Make can_restart static to fix the following sparse warning: drivers/net/can/dev.c:371:6: warning: symbol 'can_restart' was not declared. Should it be static? Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-02can: cc770: fix sparse warning for cc770_interruptMarc Kleine-Budde
Make cc770_interrupt static to fix the following sparse warning: drivers/net/can/cc770/cc770.c:699:13: warning: symbol 'cc770_interrupt' was not declared. Should it be static? Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/caif/caif_hsi.c drivers/net/usb/qmi_wwan.c The qmi_wwan merge was trivial. The caif_hsi.c, on the other hand, was not. It's a conflict between 1c385f1fdf6f9c66d982802cd74349c040980b50 ("caif-hsi: Replace platform device with ops structure.") in the net-next tree and commit 39abbaef19cd0a30be93794aa4773c779c3eb1f3 ("caif-hsi: Postpone init of HIS until open()") in the net tree. I did my best with that one and will ask Sjur to check it out. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang
The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <stable@vger.kernel.org> # v3.2+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 23:30:44 +0000