aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bonding/bond_main.c
AgeCommit message (Collapse)Author
2010-10-27bonding: Fix lockdep warning after bond_vlan_rx_register()Jarek Poplawski
Fix lockdep warning: [ 52.991402] ====================================================== [ 52.991511] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 52.991569] 2.6.36-04573-g4b60626-dirty #65 [ 52.991622] ------------------------------------------------------ [ 52.991696] ip/4842 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: [ 52.991758] (&bond->lock){++++..}, at: [<efe4d300>] bond_set_multicast_list+0x60/0x2c0 [bonding] [ 52.991966] [ 52.991967] and this task is already holding: [ 52.992008] (&bonding_netdev_addr_lock_key){+.....}, at: [<c04e5530>] dev_mc_sync+0x50/0xa0 [ 52.992008] which would create a new lock dependency: [ 52.992008] (&bonding_netdev_addr_lock_key){+.....} -> (&bond->lock){++++..} [ 52.992008] [ 52.992008] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 52.992008] (&(&mc->mca_lock)->rlock){+.-...} [ 52.992008] ... which became SOFTIRQ-irq-safe at: [ 52.992008] [<c0272beb>] __lock_acquire+0x96b/0x1960 [ 52.992008] [<c027415e>] lock_acquire+0x7e/0xf0 [ 52.992008] [<c05f356d>] _raw_spin_lock_bh+0x3d/0x50 [ 52.992008] [<c0584e40>] mld_ifc_timer_expire+0xf0/0x280 [ 52.992008] [<c024cee6>] run_timer_softirq+0x146/0x310 [ 52.992008] [<c024591d>] __do_softirq+0xad/0x1c0 [ 52.992008] [ 52.992008] to a SOFTIRQ-irq-unsafe lock: [ 52.992008] (&bond->lock){++++..} [ 52.992008] ... which became SOFTIRQ-irq-unsafe at: [ 52.992008] ... [<c0272c3b>] __lock_acquire+0x9bb/0x1960 [ 52.992008] [<c027415e>] lock_acquire+0x7e/0xf0 [ 52.992008] [<c05f36b8>] _raw_write_lock+0x38/0x50 [ 52.992008] [<efe4cbe4>] bond_vlan_rx_register+0x24/0x70 [bonding] [ 52.992008] [<c0598010>] register_vlan_dev+0xc0/0x280 [ 52.992008] [<c0599f3a>] vlan_newlink+0xaa/0xd0 [ 52.992008] [<c04ed4b4>] rtnl_newlink+0x404/0x490 [ 52.992008] [<c04ece35>] rtnetlink_rcv_msg+0x1e5/0x220 [ 52.992008] [<c050424e>] netlink_rcv_skb+0x8e/0xb0 [ 52.992008] [<c04ecbac>] rtnetlink_rcv+0x1c/0x30 [ 52.992008] [<c0503bfb>] netlink_unicast+0x24b/0x290 [ 52.992008] [<c0503e37>] netlink_sendmsg+0x1f7/0x310 [ 52.992008] [<c04cd41c>] sock_sendmsg+0xac/0xe0 [ 52.992008] [<c04ceb80>] sys_sendmsg+0x130/0x230 [ 52.992008] [<c04cf04e>] sys_socketcall+0xde/0x280 [ 52.992008] [<c0202d10>] sysenter_do_call+0x12/0x36 [ 52.992008] [ 52.992008] other info that might help us debug this: ... [ Full info at netdev: Wed, 27 Oct 2010 12:24:30 +0200 Subject: [BUG net-2.6 vlan/bonding] lockdep splats ] Use BH variant of write_lock(&bond->lock) (as elsewhere in bond_main) to prevent this dependency. Fixes commit f35188faa0fbabefac476536994f4b6f3677380f [v2.6.36] Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Vosburgh <fubar@us.ibm.com>
2010-10-21bonding: make release_and_destroy staticstephen hemminger
Only used in main file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bonding: make bond_resend_igmp_join_requests_delayed staticstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20netpoll: Remove netpoll blocking from uninit pathNeil Horman
Some recent testing in netpoll with bonding showed this backtrace ------------[ cut here ]------------ kernel BUG at drivers/net/bonding/bonding.h:134! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb7/devnum CPU 0 Pid: 1876, comm: rmmod Not tainted 2.6.36-rc3+ #10 D26928/ RIP: 0010:[<ffffffffa0514ba4>] [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 RSP: 0018:ffff88003b1b5d58 EFLAGS: 00010296 RAX: ffff88003b9b6200 RBX: ffff8800373e8e00 RCX: 00000000000f4240 RDX: 00000000ffffffff RSI: 0000000000000286 RDI: 0000000000000286 RBP: ffff88003b1b5dc8 R08: 0000000000000000 R09: 00000001af7de920 R10: 0000000000000000 R11: ffff880002495e98 R12: ffff880037922700 R13: ffff880038c31000 R14: ffff880037922730 R15: 0000000000000286 FS: 00007f90e6d72700(0000) GS:ffff880002400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000346f0d9ad0 CR3: 000000003b263000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 1876, threadinfo ffff88003b1b4000, task ffff88003b36aa80) Stack: 00000000ffffffff ffff88003b1b5d7a ffff8800379221e8 ffff880037922000 <0> ffff88003b1b5dc8 ffffffff813eb5fb ffff88003b1b5da8 0000000031b177a3 <0> ffff88003b1b5da8 ffff880037922000 ffff88003b1b5e48 ffff88003b1b5e48 Call Trace: [<ffffffff813eb5fb>] ? rtmsg_ifinfo+0xcb/0xf0 [<ffffffff813daad8>] rollback_registered_many+0x168/0x280 [<ffffffff813dac09>] unregister_netdevice_many+0x19/0x80 [<ffffffff813e97b3>] __rtnl_kill_links+0x63/0x90 [<ffffffff813e980b>] __rtnl_link_unregister+0x2b/0x60 [<ffffffff813e9bde>] rtnl_link_unregister+0x1e/0x30 [<ffffffffa052124b>] bonding_exit+0x37/0x51 [bonding] [<ffffffff81098b2e>] sys_delete_module+0x19e/0x270 [<ffffffff810bb2b2>] ? audit_syscall_entry+0x252/0x280 [<ffffffff8100b0b2>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 [bonding] RSP <ffff88003b1b5d58> ---[ end trace 1395ad691cea24d1 ]--- It occurs because of my recent netpoll blocking patches, which I added to avoid recursive deadlock in the bonding driver. It relies on some per cpu bits, but the shutdown path forces some rescheduling as we cancel workqueues for the driver and wait for some device refcounts. If after the forced reschedule, we wind up on a different cpu we trigger the bughalt in unblock_netpoll_tx. The fix is to remove the netpoll block/unblock calls from bond_release_all. This is safe to do because bond_uninit, which is called via ndo_uninit in rollback_registered_many, doesn't occur until we send a NETDEV_UNREGISTER event, which triggers netconsole to remove us as a netpoll client, so we are guaranteed not to recurse into our own tx path here. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Re-enable netpoll over bondingNeil Horman
With the inclusion of previous fixup patches, netpoll over bonding apears to work reliably with failover conditions. This reverts Gospos previous commit c22d7ac844f1cb9c6a5fd20f89ebadc2feef891b, and allows access again to the netpoll functionality in the bonding driver. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix deadlock in bonding driver resulting from internal locking when ↵Neil Horman
using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix bonding drivers improper modification of netpoll structureNeil Horman
The bonding driver currently modifies the netpoll structure in its xmit path while sending frames from netpoll. This is racy, as other cpus can access the netpoll structure in parallel. Since the bonding driver points np->dev to a slave device, other cpus can inadvertently attempt to send data directly to slave devices, leading to improper locking with the bonding master, lost frames, and deadlocks. This patch fixes that up. This patch also removes the real_dev pointer from the netpoll structure as that data is really only used by bonding in the poll_controller, and we can emulate its behavior by check each slave for IS_UP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
2010-10-06bonding: add Speed/Duplex information to /proc/net/bonding/bondKrzysztof Oledzki
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: reread information about speed and duplex when interface goes upKrzysztof Piotr Oledzki
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: print information about speed and duplex seen by the driverKrzysztof Piotr Oledzki
before: bonding: bond0: link status definitely up for interface eth5 bonding: bond0: link status definitely up for interface eth0 after: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05bonding: add retransmit membership reports tunableFlavio Leitner
Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05bonding: rejoin multicast groups on VLANsFlavio Leitner
During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05bonding: fix WARN_ON when writing to bond_master sysfs fileNeil Horman
Fix a WARN_ON failure in bond_masters sysfs file Got a report of this warning recently bonding: bond0 is being created... ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:590 proc_register+0x14d/0x185() Hardware name: ProLiant BL465c G1 proc_dir_entry 'bonding/bond0' already registered Modules linked in: bonding ipv6 tg3 bnx2 shpchp amd64_edac_mod edac_core ipmi_si ipmi_msghandler serio_raw i2c_piix4 k8temp edac_mce_amd hpwdt microcode hpsa cc iss radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wai t_scan] Pid: 935, comm: ifup-eth Not tainted 2.6.33.5-124.fc13.x86_64 #1 Call Trace: [<ffffffff8104b54c>] warn_slowpath_common+0x77/0x8f [<ffffffff8104b5b1>] warn_slowpath_fmt+0x3c/0x3e [<ffffffff8114bf0b>] proc_register+0x14d/0x185 [<ffffffff8114c20c>] proc_create_data+0x87/0xa1 [<ffffffffa0211e9b>] bond_create_proc_entry+0x55/0x95 [bonding] [<ffffffffa0215e5d>] bond_init+0x95/0xd0 [bonding] [<ffffffff8138cd97>] register_netdevice+0xdd/0x29e [<ffffffffa021240b>] bond_create+0x8e/0xb8 [bonding] [<ffffffffa021c4be>] bonding_store_bonds+0xb3/0x1c1 [bonding] [<ffffffff812aec85>] class_attr_store+0x27/0x29 [<ffffffff8115423d>] sysfs_write_file+0x10f/0x14b [<ffffffff81101acf>] vfs_write+0xa9/0x106 [<ffffffff81101be2>] sys_write+0x45/0x69 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b ---[ end trace a677c3f7f8b16b1e ]--- bonding: Bond creation failed. It happens because a user space writer to bond_master can try to register an already existing bond interface name. Fix it by teaching bond_create to check for the existance of devices with that name first in cases where a non-NULL name parameter has been passed in Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17bonding: enable gro by defaultEric Dumazet
gro can be enabled by default on bonding devices. Actual support depends on the lower devices. One can still use ethtool to switch off GRO if needed. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07bonding: Fix jiffies overflow problems (again)Jiri Bohac
The time_before_eq()/time_after_eq() functions operate on unsigned long and only work if the difference between the two compared values is smaller than half the range of unsigned long (31 bits on i386). Some of the variables (slave->jiffies, dev->trans_start, dev->last_rx) used by bonding store a copy of jiffies and may not be updated for a long time. With HZ=1000, time_before_eq()/time_after_eq() will start giving bad results after ~25 days. jiffies will never be before slave->jiffies, dev->trans_start, dev->last_rx by more than possibly a couple ticks caused by preemption of this code. This allows us to detect/prevent these overflows by replacing time_before_eq()/time_after_eq() with time_in_range(). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22bonding: don't lock when copying/clearing VLAN list on slaveJay Vosburgh
When copying VLAN information to or removing from a slave during slave addition or removal, the bonding code currently holds the bond->lock for write to prevent concurrent modification of the vlan_list / vlgrp. This is unnecessary, as all of these operations occur under RTNL. Holding the bond->lock also caused might_sleep issues for some drivers' ndo_vlan_* functions. This patch removes the extra locking. Problem reported by Michael Chan <mchan@broadcom.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-22bonding: change test for presence of VLANsJay Vosburgh
After commit ad1afb00393915a51c21b1ae8704562bf036855f ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") it is now regular practice for a VLAN "add vid" for VLAN 0 to arrive prior to any VLAN registration or creation of a vlan_group. This patch updates the bonding code that tests for the presence of VLANs configured above bonding. The new logic tests for bond->vlgrp to determine if a registration has occured, instead of testing that bonding's internal vlan_list is empty. The old code would panic when vlan_list was not empty, but vlgrp was still NULL (because only an "add vid" for VLAN 0 had occured). Bonding still adds VLAN 0 to its internal list so that 802.1p frames are handled correctly on transmit when non-VLAN accelerated slaves are members of the bond. The test against bond->vlan_list remains in bond_dev_queue_xmit for this reason. Modification to the bond->vlgrp now occurs under lock (in addition to RTNL), because not all inspections of it occur under RTNL. Additionally, because 8021q will never issue a "kill vid" for VLAN 0, there is now logic in bond_uninit to release any remaining entries from vlan_list. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Cc: Pedro Garcia <pedro.netdev@dondevamos.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bonding: avoid a warningEric Dumazet
drivers/net/bonding/bond_main.c:179:12: warning: ‘disable_netpoll’ defined but not used Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-07-07net: fix 64 bit counters on 32 bit archesEric Dumazet
There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28bonding: prevent netpoll over bonded interfacesAndy Gospodarek
Support for netpoll over bonded interfaces was added here: commit f6dc31a85cd46a959bdd987adad14c3b645e03c1 Author: WANG Cong <amwang@redhat.com> Date: Thu May 6 00:48:51 2010 -0700 bonding: make bonding support netpoll but it is bad enough that we should probably just disable netpoll over bonding until some of the locking logic in the bonding driver is changed or converted completely to RCU. Simple actions like changing the active slave in active-backup mode will hang the box if a high enough printk debugging level is enabled. Keeping the old code around will be good for anyone that wants to work on it (and for after the RCU conversion), so I propose this small patch rather than ripping it all out. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-12net: Enable 64-bit net device statistics on 32-bit architecturesBen Hutchings
Use struct rtnl_link_stats64 as the statistics structure. On 32-bit architectures, insert 32 bits of padding after/before each field of struct net_device_stats to make its layout compatible with struct rtnl_link_stats64. Add an anonymous union in net_device; move stats into the union and add struct rtnl_link_stats64 stats64. Add net_device_ops::ndo_get_stats64, implementations of which will return a pointer to struct rtnl_link_stats64. Drivers that implement this operation must not update the structure asynchronously. Change dev_get_stats() to call ndo_get_stats64 if available, and to return a pointer to struct rtnl_link_stats64. Change callers of dev_get_stats() accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net-next: remove useless union keywordChangli Gao
remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05bonding: allow user-controlled output slave selectionAndy Gospodarek
v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05bonding: add all_slaves_active parameterAndy Gospodarek
v2: changed parameter name from 'keep_all' to 'all_slaves_active' and skipped setting slaves to inactive rather than creating a new flag at Jay's suggestion. In an effort to suppress duplicate frames on certain bonding modes (specifically the modes that do not require additional configuration on the switch or switches connected to the host), code was added in the generic receive patch in 2.6.16. The current behavior works quite well for most users, but there are some times it would be nice to restore old functionality and allow all frames to make their way up the stack. This patch adds support for a new module option and sysfs file called 'all_slaves_active' that will restore pre-2.6.16 functionality if the user desires. The default value is '0' and retains existing behavior, but the user can set it to '1' and allow all frames up if desired. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bonding: remove unused original_flags struct slave memberJiri Pirko
This is stored but never restored. So remove this as it is useless. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bonding: move dev_addr cpy to bond_enslaveJiri Pirko
Move the code that copies slave's mac address in case that's the first slave into bond_enslave. Ifenslave app does this also but that's not a problem. This is something that should be done in bond_enslave, and it shound not matter from where is it called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bonding: move slave MTU handling from sysfs V2Jiri Pirko
V1->V2: corrected res/ret use For some reason, MTU handling (storing, and restoring) is taking place in bond_sysfs. The correct place for this code is in bond_enslave, bond_release. So move it there. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bonding: make bonding support netpollWANG Cong
Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: move address list functions to a separate fileJiri Pirko
+little renaming of unicast functions to be smooth with multicast ones Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01bonding: fix potential deadlock in bond_uninit()Amerigo Wang
bond_uninit() is invoked with rtnl_lock held, when it does destroy_workqueue() which will potentially flush all works in this workqueue, if we hold rtnl_lock again in the work function, it will deadlock. So move destroy_workqueue() to destructor where rtnl_lock is not held any more, suggested by Eric. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31bonding: bond_xmit_roundrobin() fixEric Dumazet
Commit a2fd940f (bonding: fix broken multicast with round-robin mode) added a problem on litle endian machines. drivers/net/bonding/bond_main.c:4159: warning: comparison is always false due to limited range of data type Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27bonding: fix broken multicast with round-robin modeAndy Gospodarek
Round-robin (mode 0) does nothing to ensure that any multicast traffic originally destined for the host will continue to arrive at the host when the link that sent the IGMP join or membership report goes down. One of the benefits of absolute round-robin transmit. Keeping track of subscribed multicast groups for each slave did not seem like a good use of resources, so I decided to simply send on the curr_active slave of the bond (typically the first enslaved device that is up). This makes failover management simple as IGMP membership reports only need to be sent when the curr_active_slave changes. I tested this patch and it appears to work as expected. Originally reported by Lon Hohberger <lhh@redhat.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Lon Hohberger <lhh@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-24net/various: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21bonding: flush unicast and multicast lists when changing typeJiri Pirko
After the type change, addresses in unicast and multicast lists wouldn't make sense, not to mention possible different lenghts. So flush both lists here. Note "dev_addr_discard" will be very soon replaced by "dev_mc_flush" (once mc_list conversion will be done). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18bonding: check return value of nofitier when changing typeJiri Pirko
This patch adds the possibility to refuse the bonding type change for other subsystems (such as for example bridge, vlan, etc.) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18net: rename notifier defines for netdev type changeJiri Pirko
Since generally there could be more netdevices changing type other than bonding, making this event type name "bonding-unrelated" Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27bonding: fix device leak on error in bond_create()Patrick McHardy
When the register_netdevice() call fails, the newly allocated device is not freed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03bonding: Remove net_device_stats from bonding structAjit Khaparde
There is no need to maintain stats in the bonding structure. Use the instance of net_device_stats in netdevice. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-28bonding: bond_open error return valuestephen hemminger
The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17net: spread __net_init, __net_exitAlexey Dobriyan
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-03bonding: allow arp_ip_targets on separate vlans to use arp validationAndy Gospodarek
This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13drivers/net/bonding/: : use pr_fmtJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME from pr_<level>s Consolidate long format strings Remove some extra tab indents Remove some unnecessary ()s from pr_<level>s arguments Align pr_<level> arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-01net: Simplify the bond drivers pernet operations.Eric W. Biederman
Take advantage of the new pernet automatic storage management, and stop using compatibility network namespace functions. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18netns: net_identifiers should be read_mostlyEric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-24 02:38:23 +0000