aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/benet
AgeCommit message (Collapse)Author
2009-08-17be2net: destroy mcc queue before tx queuesSathya Perla
As mcc queue uses the tx event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17be2net: refactor be_msix_(un)register() code.Sathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17be2net: Set mac addr in hw regardless of netif_running()Sathya Perla
be_mac_addr_set() currently is broken when netif_running() is false. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13be2net:Creating/destroying queues regardless of netif_running() in ↵Sarveshwar Bandi
suspend/resume path Signed-off-by: sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12be2net: clear & notify residual events before destroying event queuesSathya Perla
Any events rcvd after interrupts are disabled (in the driver unload path), must be cleared and notified before the event queues are destroyed Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12be2net: fix bad queue traversal in be_rx_q_clean()Sathya Perla
Using "for(tail != head)" to traverse a queue from tail to head fails in the case of a fully filled queue. Use "for(used != 0)" instead. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12be2net: Clear pending tx completions before destroying tx queueSathya Perla
Clear pending tx completions in be_close() (ndo.stop method) so that after unregister_netdev() calls be_close(), all tx skbs are freed and there are no more tx completions when txq is destroyed. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05be2net: Patch to perform function reset at initializationsarveshwarb
This patch is a bug fix to avoid system going into a bad state when driver is loaded in context of kdump kernel. The patch fixes the issue by performing a soft reset of pci function at probe time. Signed-off-by: sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: delete unnecessary code from be_cmd_POST()Sathya Perla
When the driver loads the POST stage of the card is expected to be POST_STAGE_ARMFW_RDY. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: some name changes for consistencySathya Perla
be_mbox_db_ring() has been changed to be_mbox_notify() (to be consistent with be_mcc_notify()) and struct be_mcc_cq_entry changed to be_mcc_compl to be consistent with rx/tx_compl. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: replace some printks with dev_err()/dev_warn()Sathya Perla
And get rid of some unnecessary printks. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: remove pci_func field from be_adapter structSathya Perla
pci function is available as PCI_FUNC(pdev->devfn); no need for a separate field. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-01be2net: get rid of be_ctrl_info struct/abstractionSathya Perla
Currently only the be_ctrl_info struct ptr (instead of adapter) is passed to all the routines in be_cmds.c. Instead pass be_adapter ptr to allow access to all its fields. Merge the contents of struct be_ctrl_info into be_adapter. The resulting code is simpler. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwmc3200wifi/netdev.c net/wireless/scan.c
2009-07-23be2net: Add GRO support to the be2net driver. LRO is not supported anymore.Ajit Khaparde
This patch removes support for INET_LRO and switches over to GRO. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-22be2net: Bug fix in the non-lro path. Size of received packet was not updated ↵Ajit Khaparde
in statistics properly. This patch fixes a bug in the non-lro path. Wrong size of received packet was being passed for updating receive statistics. This patch is against the net-2.6 git. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-28be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames.Ajit Khaparde
While testing the driver on PPC, we ran into a crash with LRO, Jumbo frames. With CONFIG_PPC_64K_PAGES configured (a default in PPC), MAX_SKB_FRAGS drops to 3 and we were crossing the array limits on skb_shinfo(skb)->frags[]. Now we coalesce the frags from the same physical page into one slot in skb_shinfo(skb)->frags[] and go to the next index when the frag is from different physical page. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: receive asynchronous link status notifications from BESathya Perla
Rcv and process ansync link status notifications from BE instead of polling for link status in the be_worker thread. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: cleanup multicast_set cmd to avoid mc_list copySathya Perla
Cleanup multicast_set method to avoid an extra copy of mc_list and unwanted promiscuos sets to BE. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: Use MCC queue for cmds that may be called in BH contextSathya Perla
Currenlty multicast_set and promiscuous_config cmds -- that may be called in BH context -- use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. So, these two cmds in BH context must use the MCC queue to post cmds. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19be2net: Add MCC queue mechanism for BE cmdsSathya Perla
Currenlty all cmds use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. Instead cmds that may be called in BH context must use the MCC queue to post cmds. The cmd completions are rcvd in a separate completion queue and the events are placed in the tx-event queue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11be2net: Fix be_tx_q_clean() being called on freed queuesSathya Perla
In the tx queue destroy path, be_tx_q_clean() is currently called after the tx queues are freed; it must be called before. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11be2net: Fix early reset of rx-completionSathya Perla
be_rx_compl_get() must not reset(via the valid word) the rx_compl as the rx_compl is not processed yet; it must be reset after it is processed. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11be2net: Fix rx stats updation in non-lro pathSathya Perla
rx stats are not getting updated when an rx_compl with only one frag is rcvd in non-lro path. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11be2net: fix netdev stats rx_errors and rx_droppedSathya Perla
Fix netdev stat rx_errors to cover length related errors and checksum errors and rx_dropped to the pkts dropped due to lack of buffers Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11be2net: Use cancel_delayed_work_sync instead of cancel_delayed_work()Sathya Perla
Use cancel_delayed_work_sycn instead of cancel_delayed_work() to reliably kill be_worker() as it rearms itself. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09be2net: Remove unnecessary frag list traversing.David S. Miller
This driver does not indicate support for frag lists. Furthermore, even if it did, the code is walking the frag lists incorrectly. The idiom is: for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) but it's doing: for (iter = skb_shinfo(skb)->frag_list; iter; iter = skb_shinfo(iter)->frag_list) which would never work. And this proves that this driver never saw an SKB with active frag lists. So just remove the code altogether and the driver TX path becomes much simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_start in 10GB driversEric Dumazet
Followup of commits 9d21493b4beb8f918ba248032fefa393074a5e2b and 08baf561083bc27a953aa087dd8a664bb2b88e8e (net: tx scalability works : trans_start) (net: txq_trans_update() helper) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Multi queue drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers (vxge & tehuti) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-18be2net: add two new pci device ids to pci device tableAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (64 commits) phylib: Fix delay argument of schedule_delayed_work NET/ixgbe: Fix powering off during shutdown NET/e1000e: Fix powering off during shutdown NET/e1000: Fix powering off during shutdown packet: avoid warnings when high-order page allocation fails gianfar: stop send queue before resetting gianfar myr10ge: again fix lro_gen_skb() alignment declance: convert to net_device_ops bfin_mac: convert to net_device_ops au1000: convert to net_device_ops atarilance: convert to net_device_ops a2065: convert to net_device_ops ixgbe: update real_num_tx_queues on changing num_rx_queues ixgbe: fix tx queue index Revert "rose: zero length frame filtering in af_rose.c" sfc: Use correct macro to set event bitfield sfc: Match calls to netif_napi_add() and netif_napi_del() bonding: Remove debug printk e1000/e1000: fix compile warning ehea: Fix incomplete conversion to net_device_ops ...
2009-04-13be2net: fix for default setting of pause auto-negotiationAjit Khaparde
This patch fixes the default value of pause auto-negotiation supported by PCS. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-13be2net: changes for checksum and segmentation offloadAjit Khaparde
- Enables Rx checksum feature by default. - Disables support for ipv6 tso. - Changes in Rx path to handle Rx completions with various checksum options. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27benet: use do_div() for 64 bit divideStephen Hemminger
The benet driver is doing a 64 bit divide, which is not supported in Linux kernel on 32 bit architectures. The correct way to do this is to use do_div(). Compile tested on i386 only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24be2net: cleanup rx/tx rate calculationsSathya Perla
Hi, Pls accept this patch to cleanup rx/tx rate calculations as follows: - check for jiffies wraparound - remove typecast of a denominator - do rate calculation only in workqueue context periodically Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycleSathya Perla
This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-19be2net: replenish when posting to rx-queue is starved in out of mem conditionsSathya Perla
This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-11net: Add be2net driver.Sathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-27 06:18:51 +0000