aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2011-05-25mtd: sst25l: fix section markingsMike Frysinger
The previous section mismatch fix for this driver wasn't entirely correct. The sst25l_flash_info array is now used in the devinit probe func, but is marked as initdata, so building results in the warning: WARNING: drivers/mtd/devices/sst25l.o(.devinit.text): Section mismatch in reference from the function sst25l_probe() to the variable .init.data:sst25l_flash_info Further, the remove func should be devexit rather than exit to match the probe func. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: m25p80: Add Spansion S25FL512S, S70FL01GSKevin Cernekee
S25FL512S = 64MiB single die, same family as S25FL256S S70FL01GS = 2x S25FL512S dies in one package (separate chip selects) These devices are not sampling yet, but they are expected to be very similar to S25FL256S, which has been tested. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: m25p80: Add Spansion S25FL256SKevin Cernekee
These are 32MiB parts which use a slightly different 4-byte enable sequence from Macronix. Default to the Spansion 4-byte scheme in set_4byte(), as it is more likely to be copied by other vendors. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: m25p80: Clean up JEDEC manufacturer checksKevin Cernekee
Use the manufacturer ID names from cfi.h instead of hard-coding hex constants. Introduce a JEDEC_MFR macro for clarity. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: m25p80: Add Numonyx m25px32 familyKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: denali: detect the number of banksJamie Iles
Not all configurations of the Denali controller support 4 banks. The controller can support between 1 and 16 banks. Detect this from the design features register. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: denali: remove nearly-duplicated register definitionsJamie Iles
The controller has interrupt enable/status register pairs for each bank (along with ECC and status registers) that differ only in address offset. Rather than providing definitions for each register, make the address a macro so that it scales for devices with different numbers of banks. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: denali: convert to generic DMA APIJamie Iles
Rather than using the PCI specific DMA API, convert to the generic DMA API so that we can use the Denali NAND controller on other bus types. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: onenand: add missing checkjohn.maxin@nokia.com
Coverity has reported that inside the function "onenand_block_by_block_erase()" in onenand_base.c, we should add a check to prevent the incrementing of possible NULL value for "region" Signed-off-by: Maxin B. John <john.maxin@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: return badblockbits backArtem Bityutskiy
In commit c7b28e25cb9beb943aead770ff14551b55fa8c79 the initialization of the backblockbits was accidentally removed. This patch returns it back, because otherwise some NAND drivers are broken. This problem was reported by "Saxena, Parth <parth.saxena@ti.com>" here: http://lists.infradead.org/pipermail/linux-mtd/2011-April/035221.html Reported-by: Saxena, Parth <parth.saxena@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Tested-by: Saxena, Parth <parth.saxena@ti.com> Acked-by: Saxena, Parth <parth.saxena@ti.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Cc: stable@kernel.org [2.6.36+] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: nand: ndfc: add multiple chip select supportFelix Radensky
This patch extends NDFC driver to support all 4 chip selects available in NDFC NAND controller. Tested on custom 460EX board with 2 chip select NAND device. Artem: white-space cleanups Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: mtdchar: retry large buffer allocationsGrant Erickson
Replace direct call to kmalloc for a potentially large, contiguous buffer allocation with one to mtd_kmalloc_up_to which helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Signed-off-by: Grant Erickson <marathon96@gmail.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: create function to perform large allocationsGrant Erickson
Introduce a common function to handle large, contiguous kmalloc buffer allocations by exponentially backing off on the size of the requested kernel transfer buffer until it succeeds or until the requested transfer buffer size falls below the page size. This helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Artem: so this patch solves the problem that the kernel tries to kmalloc too large buffers, which (a) may fail and does fail - people complain about this, and (b) slows down the system in case of high memory fragmentation, because the kernel starts dropping caches, writing back, swapping, etc. But we do not really have to allocate a lot of memory to do the I/O, we may do this even with as little as one min. I/O unit (NAND page) of RAM. So the idea of this patch is that if the user asks to read or write a lot, we try to kmalloc a lot, with GFP flags which make the kernel _not_ drop caches, etc. If we can allocate it - good, if not - we try to allocate twice as less, and so on, until we reach the min. I/O unit size, which is our last resort allocation and use the normal GFP_KERNEL flag. Artem: re-write the allocation function so that it makes sure the allocated buffer is aligned to the min. I/O size of the flash. Signed-off-by: Grant Erickson <marathon96@gmail.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: mtdconcat: fix NAND OOB writeFelix Radensky
Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: omap2: mtd split nand_scan in ident and tailJan Weitzel
nand_scan calls nand_scan_tail and here we got a ecc.layout and calculate oobavail for this layout. After calling nand_scan, we change the layout pointer if OMAP_ECC_HAMMING_CODE_HW_ROMCODE is set. This results in not calcluated oobavail. Mountig as jffs2 is not possible. To fix that nand_scan has to split up in nand_scan_ident and nand_scan_tail setting ecc.layout between these calls. So nand_scan_tail calculates oobvail for the used layout. This is also done in serveral other platforms. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Reviewed-by: Vimal Singh <vimal.newwork@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: mtd_blkdevs: fix error path in blktrans_openArtem Bityutskiy
The 'blktrans_open()' does not handle possible '__get_mtd_device()' failures because it does not check the error code. Moreover, the 'dev->tr->open()' failures are not handled correctly because in this case the function just goes ahead and gets the mtd device, then returns an error. But Instead, it should _not_ try to get the mtd device, then it should put back the module and the kref. This patch fixes the issue. Note, I only compile-tested it. This patch was inspired by a bug report about a similar issue in 2.6.34 kernels sent by Mike Turner <admin@islandsoftware.co.uk> to the MTD mailing list: http://lists.infradead.org/pipermail/linux-mtd/2011-April/034980.html Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: atmel_nand: add missing include of linux/dmaengine.hHans-Christian Egtvedt
Including linux/dmaengine.h fixes the missing definition of the enum dma_ctrl_flags type used in atmel_nand_dma_op function. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: nand: remove doubled chip deselection on (un)lockJiri Pinkava
Chip deselection is already done in nand_release_device. So only duplicate code. Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: nand: fix S3C NAND clock stopJiri Pinkava
Current implementation of s3c2410_nand_select_chip call clk_disable every time when chip = -1 (de-select). This happend multiple times even if chip was already de-selected. This causes disabling clock even if they are already disabled and due to nature of clock subsytem implementation this causes nand clock to be disabled and newer enabled again. Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: cmdset_0002: add CFI 1.5 support for S29GL-SGernot Hoyler
This patch adds CFI 1.5 support for the new Spansion S29GL-S device family. For details, see the data sheet on the Spansion web site: http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf Signed-off-by: Gernot Hoyler <Gernot.Hoyler@spansion.com> Acked-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: onenand: add ecclayout and subpage_sft for non-flex 4KiB page onenandRoman Tereshonkov
So as the ecclayout and suppage size for 4KiB page Flex- and none-Flex OneNAND are different the new values for none-Flex 4KiB page OneNAND memory are added. The introduced ecclayout and suppage size are based on specification 4Gib M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010 For eccpos we expose only 64 bytes out of 72, for oobfree the spare area fields marked as "Managed by internal ECC logic for Logical Sector Number area" are used. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: denali: drop __TIME__ usageMichal Marek
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: nand: dynamic allocation of flash-based BBT structsBrian Norris
It is nicer to dynamically create our badblock patterns than to statically define them. The nand_create_default_bbt_descr() function does a sufficient job of handling various bad block scanning options for either flash-based or non-flash-based BBTs, so we might as well use the function for both cases. This patch simplifies and shortens our code (and removes a TODO that I left a few months ago). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: m25p80: add support for the MX25L1606E chipGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: mxc_nand: add support for multiple chips on V21 devicesBaruch Siach
Do the following to add support for up to 4 chips on V21 devices (i.MX25 and i.MX35): * implement .select_chip for V21 * adjust existing NFC_V1_V2_BUF_ADDR writes to take chip select into account * unlock all chip selects at preset_v1_v2() * scan up to 4 devices at .probe This has been tested on i.MX25 with two attached NAND chip (on one die). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-24Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: switch to dynamic printks UBI: turn some macros into static inline UBI: improve checking in debugging prints UBI: fix typo in a message UBI: fix minor stylistic issues UBI: use __packed instead of __attribute__((packed)) UBI: cleanup comments around volume properties UBI: re-name set volume properties ioctl UBI: make the control character device non-seekable
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', ↵Russell King
'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
2011-05-20ARM: 6910/1: MTD: physmap: let set_vpp() pass a platform_device instead of a ↵Marc Zyngier
map_info The set_vpp() method provided by physmap passes a map_info back to the platform code, which has little relevance as far as the platform is concerned (this parameter is completely unused). Instead, pass the platform_device, which can be used in the pismo driver to retrieve some important information in a nicer way, instead of the hack that was in place. The empty set_vpp function in board-at572d940hf_ek.c is left untouched, as the board/SoC is scheduled for removal. Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6906/1: MTD: Remove integrator-flashMarc Zyngier
As there is now no in-tree user of integrator-flash, remove it completely. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20ARM: 6904/1: MTD: Add integrator-flash feature to physmapMarc Zyngier
In the process of moving platforms away from integrator-flash (aka armflash), add to physmap the few features that make armflash unique: - optionnal probing for the AFS partition type - init() and exit() methods, used by Integrator to control write access to the various onboard programmable components Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-20UBI: switch to dynamic printksArtem Bityutskiy
Remove custom dynamic prints and the module parameter to toggle them and use the generic kernel dynamic printk infrastructure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20UBI: turn some macros into static inlineArtem Bityutskiy
Similarly as we have done for UBIFS in 1dcffad74183bb00e8129ba1c5bb2c9931d31bd7, turn the debugging macros into static inline functions, for the same reasons: to avoid gcc 4.5 warnings. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20UBI: improve checking in debugging printsArtem Bityutskiy
When debugging is disabled, define debugging prints as if (0) printk() to make sure that the compiler still the format string in debugging messages even if debugging is disabled. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-19MIPS: Alchemy: Clean up GPIO registers and accessorsManuel Lauss
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register addresses and fix the fallout in all boards and drivers. This also fixes a bug in the mtx-1_wdt driver which was introduced by commit 6ea8115bb6f359df4f45152f2b40e1d4d1891392 ("Convert mtx1 wdt to be a platform device and use generic GPIO API") before this patch mtx-1_wdt only modified GPIO215, the patch then used the gpio resource information as bit index into the GPIO2 register but the conversion to the GPIO API didn't realize that. With this patch the drivers original behaviour is restored and GPIO15 is left alone. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Florian Fainelli <florian@openwrt.org> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-watchdog@vger.kernel.org Cc: Wim Van Sebroeck <wim@iguana.be> Patchwork: https://patchwork.linux-mips.org/patch/2381/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19MIPS: Lantiq: Add NOR flash supportJohn Crispin
This patch adds the driver/map for NOR devices attached to the SoC via the External Bus Unit (EBU). Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/2285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-06pcmcia: Convert pcmcia_device_id declarations to constJoe Perches
Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-04-26Revert wrong fixes for common misspellingsLucas De Marchi
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-14UBI: fix typo in a messageArtem Bityutskiy
When a PEB passes the torture test, UBI prints "do not mark it a bad", but should print "do not mark it as bad". This patch corrects the typo. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: fix minor stylistic issuesArtem Bityutskiy
Fix checkpatch.pl errors and warnings: * space before tab * line over 80 characters * include linux/ioctl.h instead of asm/ioctl.h Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: use __packed instead of __attribute__((packed))Artem Bityutskiy
There was an attempt to standartize various "__attribute__" and other macros in order to have potentially portable and more consistent code, see commit 82ddcb040570411fc2d421d96b3e69711c670328. Note, that commit refers Rober Love's blog post, but the URL is broken, the valid URL is: http://blog.rlove.org/2005/10/with-little-help-from-your-compiler.html Moreover, nowadays checkpatch.pl warns about using __attribute__((packed)): "WARNING: __packed is preferred over __attribute__((packed))" It is not a big deal for UBI to use __packed, so let's do it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: re-name set volume properties ioctlArtem Bityutskiy
Rename the ioctl which sets volume properties from 'UBI_IOCSETPROP' to 'UBI_IOCSETVOLPROP' to reflect the fact that this ioctl is about volume properties, not device properties. This is also consistent with the other volume ioctl name - 'UBI_IOCVOLUP'. The main motivation for the re-name, however, is that we are going to introduce the per-UBI device "set properties" ioctl, so we need good and logical naming. At the same time, re-name the "set volume properties request" data structure from 'struct ubi_set_prop_req' to 'struct ubi_set_vol_prop_req'. And re-name 'UBI_PROP_DIRECT_WRITE' to 'UBI_VOL_PROP_DIRECT_WRITE'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-14UBI: make the control character device non-seekableArtem Bityutskiy
This patch makes the UBI control device (/dev/ubi_ctrl) non-seekable. The seek operation does is not applicable to this file, so it is cleaner to explicitly return error (which the added 'no_llseek()') does than trying to change the position (which the removed 'default_llseek()' does). This is an API break, but the only known user of this interface is mtd-utils which does not need the seeking functionality. And any app which relies on this is broken, but I'm not aware of such apps. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region mtd: atmel_nand: modify test case for using DMA operations mtd: atmel_nand: fix support for CPUs that do not support DMA access mtd: atmel_nand: trivial: change DMA usage information trace mtd: mtdswap: fix printk format warning
2011-04-07Merge branch 'for-linus' of git://git.infradead.org/ubifs-2.6Linus Torvalds
* 'for-linus' of git://git.infradead.org/ubifs-2.6: UBI: do not select KALLSYMS_ALL UBI: do not compare array with NULL UBI: check if we are in RO mode in the erase routine UBIFS: fix debugging failure in dbg_check_space_info UBIFS: fix error path in dbg_debugfs_init_fs UBIFS: unify error path dbg_debugfs_init_fs UBIFS: do not select KALLSYMS_ALL UBIFS: fix assertion warnings UBIFS: fix oops on error path in read_pnode UBIFS: do not read flash unnecessarily
2011-04-05UBI: do not select KALLSYMS_ALLArtem Bityutskiy
All UBI needs is to make sure we stacktraces when UBI debugging is enabled. It is enough to select KALLSYMS for this, KALLSYMS_ALL is not necessary. And the current Kconfig line we have: select KALLSYMS_ALL if KALLSYMS && DEBUG_KERNEL is just too complex to be sane and right. But this "if" part there is needed to prevent "unmet direct dependency" warnings, because KALLSYMS_ALL depends on KALLSYMS and DEBUG_KERNEL, so we cannot just select KALLSYMS_ALL. Anyway, this feels messy, and we do not seem to really need KALLSYMS_ALL, so select KALLSYMS instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-04-05UBI: do not compare array with NULLArtem Bityutskiy
Coverity spotted that UBI debugging code tries to compare an array and NULL, which obviously makes little sense. Kill this check. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-05UBI: check if we are in RO mode in the erase routineArtem Bityutskiy
'do_sync_erase()' has to check whether we are in R/O mode before erasing the PEB. This patch adds the check and while on it, adds an assertion which validates the 'pnum' argument, as well as removes a check which is always true because it has already been done few lines before. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-01mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) regionHong Xu
The previous way of dealing with vmalloc(ed) region by walking though the pages can not work well actually. We just fall back to CPU I/O when the buffer address is higher than `high_memory'. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-01 12:27:04 +0000