aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2014-05-12mmc: mmci: Enable MMC_CAP_CMD23Ulf Hansson
This is pure software configuration, which mmci has been supporting for a while. Let's enable it as default so we can take benefit from it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Use the common mmc DT parserUlf Hansson
Let mmci DT parser only handle the specific bindings related to mmci and extend the DT support by converting to the common mmc DT parser. While both DT and platform data exist, DT takes precedence. If there are supplied DT data, the card detect and write protect GPIOS are enforced to be provided through it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for feedback clock pinUlf Hansson
The ST Micro variant supports the option of using a feedback clock signal in favor of the clockout pin when latching incoming signals on the data bus. Since this is matter of how pins are being routed we need to provide a new DT binding to be able to configure this through DT. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Add DT bindings for signal directionUlf Hansson
Some variants have support for indicating the bus signal directions, which currently are configured through platform data. Add corresponding DT bindings to enable us to move away from using the platform data. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-12mmc: mmci: Convert to devm functionsUlf Hansson
Converting to devm functions to simplify error handling in ->probe() and to cleanup ->remove(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Convert to the mmc gpio APIUlf Hansson
To avoid duplication of code while handling card detect and write protect GPIO pins/irqs, let's convert to use the mmc gpio API. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Put the device into low power state at system suspendUlf Hansson
For CONFIG_PM_SLEEP, the device were always left in full power state after system suspend. We solely relied on a power domain to put it into low power state, which is an unreasonable requirement to put on SOCs to implement. Especially for those SOCs not supporting power domains at all. Use pm_runtime_force_suspend|resume() as the system suspend callbacks, to resolve the issue. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Let runtime PM callbacks be available for CONFIG_PMUlf Hansson
Convert to the SET_PM_RUNTIME_PM macro while defining the runtime PM callbacks. This means the callbacks becomes available for both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME, which is needed to handle the combinations of these scenarios. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mmci: Mask IRQs for all variants during runtime suspendUlf Hansson
In runtime suspended state, we are not expecting IRQs and thus we can safely mask them, not only for pwrreg_nopower variants but for all. Obviously we then also need to make sure we restore the IRQ mask while becoming runtime resumed. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-08mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"Micky Ching
This reverts commit c42deffd5b53c9e583d83c7964854ede2f12410d. commit <mmc: rtsx: add support for pre_req and post_req> did use mutex_unlock() in tasklet, but mutex_unlock() can't be used in tasklet(atomic context). The driver needs to use mutex to avoid concurrency, so we can't use tasklet here, the patch need to be removed. The spinlock host->lock and pcr->lock may deadlock, one way to solve the deadlock is remove host->lock in sd_isr_done_transfer(), but if using workqueue the we can avoid using the spinlock and also avoid the problem. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28mmc: Add realtek USB sdmmc host driverRoger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek USB card reader MFD driver. Signed-off-by: Roger Tseng <rogerable@realtek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-22mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching
a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: core: Invoke sdio func driver's PM callbacks from the sdio busUlf Hansson
The sdio func device is added to the driver model after the card device. This means the sdio func device will be suspend before the card device and thus resumed after. The consequence are the mmc core don't explicity need to protect itself from receiving sdio requests in suspended state. Instead that can be handled from the sdio bus, which is thus invokes the PM callbacks instead of old dummy function. In the case were the sdio func driver don't implement the PM callbacks the mmc core will in the early phase of system suspend, remove the card from the driver model and thus power off it. Cc: Aaron Lu <aaron.lu@intel.com> Cc: NeilBrown <neilb@suse.de> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Tested-by: xiaoming wang <xiaoming.wang@intel.com> Tested-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: core: Use maximum timeout values in case TACC field is zeroStefan Wahren
When plugging a specific micro SD card at MMC socket of a custom i.MX28 board, we get the following kernel warning: WARNING: CPU: 0 PID: 30 at drivers/mmc/host/mxs-mmc.c:342 mxs_mmc_start_cmd+0x34c/0x378() Modules linked in: CPU: 0 PID: 30 Comm: kworker/u2:1 Not tainted 3.14.0-rc5 #8 Workqueue: kmmcd mmc_rescan [<c0015420>] (unwind_backtrace) from [<c0012cb0>] (show_stack+0x10/0x14) [<c0012cb0>] (show_stack) from [<c001daf8>] (warn_slowpath_common+0x6c/0x8c) [<c001daf8>] (warn_slowpath_common) from [<c001db34>] (warn_slowpath_null+0x1c/0x24) [<c001db34>] (warn_slowpath_null) from [<c0349478>] (mxs_mmc_start_cmd+0x34c/0x378) [<c0349478>] (mxs_mmc_start_cmd) from [<c0338fa0>] (mmc_start_request+0xc4/0xf4) [<c0338fa0>] (mmc_start_request) from [<c03390b4>] (mmc_wait_for_req+0x50/0x164) [<c03390b4>] (mmc_wait_for_req) from [<c03405b8>] (mmc_app_send_scr+0x158/0x1c8) [<c03405b8>] (mmc_app_send_scr) from [<c033ee1c>] (mmc_sd_setup_card+0x80/0x3c8) [<c033ee1c>] (mmc_sd_setup_card) from [<c033f788>] (mmc_sd_init_card+0x124/0x66c) [<c033f788>] (mmc_sd_init_card) from [<c033fd7c>] (mmc_attach_sd+0xac/0x174) [<c033fd7c>] (mmc_attach_sd) from [<c033a658>] (mmc_rescan+0x25c/0x2d8) [<c033a658>] (mmc_rescan) from [<c003597c>] (process_one_work+0x1b4/0x4ec) [<c003597c>] (process_one_work) from [<c0035de4>] (worker_thread+0x130/0x464) [<c0035de4>] (worker_thread) from [<c003c824>] (kthread+0xb4/0xd0) [<c003c824>] (kthread) from [<c000f420>] (ret_from_fork+0x14/0x34) The error is due to an invalid value in CSD register of a specific 2GB micro SD card. The CSD version of this card is 1.0 but the TACC field has the invalid value 0. cid:0000005553442020000000000000583f csd:00000032535a83bfedb7ffbf1680003f date:08/2005 erase_size:512 fwrev:0x0 hwrev:0x0 manfid:0x000000 name:USD oemid:0x0000 preferred_erase_size:4194304 scr:0225000000000000 serial:0x00000000 type:SD Since the kernel is making use of this TACC field to calculate the SD card timeout, an invalid value 0 leads to a warning at mxs_ns_to_ssp_ticks() and later the following misleading error message appears in a loop: mxs-mmc 80010000.ssp: card claims to support voltages below defined range mxs-mmc 80010000.ssp: no support for card's volts mmc0: error -22 whilst initialising MMC card This error is only found on this 2GB SD card on mxs platform. On x86 this card works without any problems. The following patch based on the work of Peter Chan and Otavio Salvador. It catches the case that the determined timeout is still 0 and sets it to a valid value. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: Convert to use ATTRIBUTE_GROUPSAxel Lin
Use new ATTRIBUTE_GROUPS macro to declare attribute groups. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-22mmc: Delay the card_event callback into the mmc_rescan workerMarkus Mayer
This change removes the callback from atomic context which it doesn't need to be in, and puts it in line with the debounced rescan. This code is based on these e-mail threads with Christian Daudt: https://lkml.org/lkml/2013/8/19/539 https://lkml.org/lkml/2014/3/19/79 Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: dw_mmc: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Replaced UHS_DDR50 with MMC_DDR52. And MMC_CAP_UHS_DDR50 is removed because of non-implementation of UHS signaling. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: rtsx: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Added MMC_DDR52 as eMMC's DDR mode is distinguished from SD-UHS. CC: Wei WANG <wei_wang@realsil.com.cn> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: sh_mmcif: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Replaced UHS_DDR50 with MMC_DDR52. CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: omap: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Replaced UHS_DDR50 with MMC_DDR52. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: mmci: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
Added MMC_DDR52 as eMMC's DDR mode distinguished from SD-UHS. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-20mmc: clarify DDR timing mode between SD-UHS and eMMCSeungwon Jeon
This change distinguishes DDR timing mode of current mixed usage to clarify device type. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-09Merge tag 'mmc-updates-for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.15: Core: - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V - Add GPIO descriptor based slot-gpio card detect API Drivers: - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c - mmci: Support HW busy detection on ux500 - omap: Support MMC_ERASE - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23 - rtsx: Support pre-req/post-req async - sdhci: Add support for Realtek RTS5250 controllers - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs" * tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits) mmc: sdhci-acpi: Intel SDIO has broken card detect mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller mmc: sdhci-msm: Add platform_execute_tuning implementation mmc: sdhci-msm: Initial support for Qualcomm chipsets mmc: sdhci-msm: Qualcomm SDHCI binding documentation sdhci: only reprogram retuning timer when flag is set mmc: rename ARCH_BCM to ARCH_BCM_MOBILE mmc: sdhci: Allow for irq being shared mmc: sdhci-acpi: Add device id 80860F16 mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14 mmc: slot-gpio: Add GPIO descriptor based CD GPIO API mmc: slot-gpio: Split out CD IRQ request into a separate function mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform" mmc: sdhci-spear: use generic card detection gpio support mmc: sdhci-spear: remove support for power gpio mmc: sdhci-spear: simplify resource handling mmc: sdhci-spear: fix platform_data usage mmc: sdhci-spear: fix error handling paths for DT mmc: sdhci-bcm-kona: fix build errors when built-in ...
2014-04-07mmc: sdhci-acpi: Intel SDIO has broken card detectAdrian Hunter
Intel SDIO has broken card detect so add a quirk to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-04-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
2014-04-04Merge branches 'amba', 'fixes', 'misc', 'mmci', 'unstable/omap-dma' and ↵Russell King
'unstable/sa11x0' into for-next
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
2014-03-29mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controllerMarcin Wojtas
The SDHCI unit used on the Armada 380 and 385 Marvell SoC is similar to the PXAv3 unit. The only difference is that on Armada 38x, the PXAv3 unit accesses memory through MBus windows which must be configured prior to using the device. Without this, DMA would not work. In order to achieve this, the sdhci-pxav3 driver is extended with an additional compatible string "marvell,armada-380-sdhci". When this compatible string is used, the MBus windows are initialized in a way that is identical to what all other DMA-capable drivers for Marvell EBU platforms do. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-29workqueue: remove deprecated WQ_NON_REENTRANTZhangZhen
Tejun Heo has made WQ_NON_REENTRANT useless in the dbf2576e37 ("workqueue: make all workqueues non-reentrant"). So remove its usages and definition. This patch doesn't introduce any behavior changes. tj: minor description updates. Signed-off-by: ZhangZhen <zhenzhang.zhang@huawei.com> Sigend-off-by: Tejun Heo <tj@kernel.org> Acked-by: James Chapman <jchapman@katalix.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-03-26mmc: sdhci-msm: Add platform_execute_tuning implementationGeorgi Djakov
This patch adds implementation for platform specific tuning in order to support HS200 bus speed mode on Qualcomm SDHCI controller. Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-26mmc: sdhci-msm: Initial support for Qualcomm chipsetsGeorgi Djakov
This platform driver adds the initial support of Secure Digital Host Controller Interface compliant controller found in Qualcomm chipsets. Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-25sdhci: only reprogram retuning timer when flag is setArend van Spriel
When the host->tuning_count is zero it means that the retuning is disabled. This is checked on the first run of sdhci_execute_tuning() by the if statement below: if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && (host->tuning_mode == SDHCI_TUNING_MODE_1)) { So only when tuning_count is non-zero it will set the host flag SDHCI_USING_RETUNING_TIMER. The else statement is only for re-programming the timer, which means that flag must be set. Because that is not checked the else statement is executed in the first run when tuning_count is zero. This was seen on a host controller which indicated SDHCI_TUNING_MODE_1 (0) and tuning_count being zero. Suspect that (one of) these registers is not properly set. Signed-off-by: Arend van Spriel <arend@broadcom.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-24mmc: rename ARCH_BCM to ARCH_BCM_MOBILEChristian Daudt
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: sdhci: Allow for irq being sharedAdrian Hunter
If the SDHCI irq is shared with another device then the interrupt handler can get called while SDHCI is runtime suspended. That is harmless but the warning message is not useful so remove it. Also returning IRQ_NONE is more appropriate. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: sdhci-acpi: Add device id 80860F16Adrian Hunter
Add ACPI HID 80860F16 as a host controller for a SD card. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14Adrian Hunter
Some 80860F14 devices do not support card detect and must rely completely on GPIO. Presently the card detect GPIO is used only to wake-up from runtime suspend. Change to using mmc_gpioid_request_cd() which will cause the SDHCI driver to prefer the GPIO to the host controller's native card detect. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: slot-gpio: Add GPIO descriptor based CD GPIO APIAdrian Hunter
Add functions to request a CD GPIO using the GPIO descriptor API. Note that the new request function is paired with mmc_gpiod_free_cd() not mmc_gpio_free_cd(). Note also that it must be called prior to mmc_add_host() otherwise the caller must also call mmc_gpiod_request_cd_irq(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: slot-gpio: Split out CD IRQ request into a separate functionAdrian Hunter
In preparation for adding a descriptor-based CD GPIO API, split out CD IRQ request into a separate function. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-17mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbersAdrian Hunter
In preparation for adding a descriptor-based CD GPIO API, switch from recording GPIO numbers to recording GPIO descriptors. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-10mmc: core: typo fix in printk specifierAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-04mmc: sdhci-spear: use generic card detection gpio supportRussell King
sdhci has support for using GPIOs for card detection. If we have a GPIO specified, we can use that directly, without needing our own interrupt handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-spear: remove support for power gpioRussell King
None of this code is currently used: there are no definitions of struct sdhci_plat_data in arch/arm, neither are there any DT properties which use card_power_gpio/power_active_high/power_always_enb. In any case, slot power control should be rigged up via vmmc and the regulator subsystem in the DT case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-spear: simplify resource handlingRussell King
Use devm_ioremap_resource() to simplify iomem resource handling in the probe path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-spear: fix platform_data usageRussell King
sdhci-spear is unsafe should a probe fail or defer, since it overwrites the platform_data with its own driver-private data. It's trivial to fix as SDHCI allows for driver-private data to be appended to its own structure - we just need to arrange the code to allow this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-spear: fix error handling paths for DTRussell King
Fix the error handling paths for DT and simplify using the devm_* API for clk_get(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: sdhci-bcm-kona: fix build errors when built-inRussell King
`sdhci_bcm_kona_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Fixes: 058feb53666f ("mmc: sdhci-bcm-kona: make linker-section warning go away") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Matt Porter <mporter@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: omap_hsmmc: add autocmd23 supportBalaji T K
Add support for autocmd23 support Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: omap_hsmmc: add cmd23 supportBalaji T K
Add set block count command support for close ended multiblock read/write. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04mmc: omap_hsmmc: split dma setupBalaji T K
split start dma function into setup and start dma to keep track of host_cookie when cmd23 support is enabled along with async request. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <chris@printf.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-03 14:03:48 +0000