aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2012-04-13mmc: atmel-mci: correct data timeout computationLudovic Desroches
commit 66292ad92c6d3f2f1c137a1c826b331ca8595dfd upstream. The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-13mmc: sdhci-dove: Fix compile error by including module.hAlf Høgemark
commit 8c2fc8e413ecc2c96b696e28d4eb1bc6cee8dc84 upstream. This patch fixes a compile error in drivers/mmc/host/sdhci-dove.c by including the linux/module.h file. Signed-off-by: Alf Høgemark <alf@i100.no> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5Sascha Hauer
commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream. On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12mmc: atmel-mci: don't use dma features when using DMA with no chan availableLudovic Desroches
commit ef8781989a1bcd05aa47e853917c37df44917194 upstream. Some callbacks are set too early -- i.e. we can have dma capabilities but we can't get a dma channel. So wait to get the dma channel before setting callbacks and change logs consequently. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29mmc: core: check for zero length ioctl dataJohan Rudholm
commit 4d6144de8ba263eb3691a737c547e5b2fdc45287 upstream. If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-20mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon
commit f9c2a0dc42a6938ff2a80e55ca2bbd1d5581c72e upstream. Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-20mmc: atmel-mci: save and restore sdioirq when soft reset is performedLudovic Desroches
commit 18ee684b8ab666329e0a0a72d8b70f16fb0e2243 upstream. Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-25mmc: sd: Fix SDR12 timing regressionAlexander Elbs
commit dd8df17fe83483d7ea06ff229895e35a42071599 upstream. This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu
commit c6ced0db08010ed75df221a2946c5228454b38d5 upstream. When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25mmc: core: Fix voltage select in DDR modeGirish K S
commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-30Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7237/1: PL330: Fix driver freeze ARM: 7197/1: errata: Remove SMP dependency for erratum 751472 ARM: 7196/1: errata: Remove SMP dependency for erratum 720789 ARM: 7220/1: mmc: mmci: Fixup error handling for dma ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
2011-12-19mmc: vub300: fix type of firmware_rom_wait_states module parameterRusty Russell
You didn't mean this to be a bool. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tony Olech <tony.olech@elandigitalsystems.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19Revert "mmc: enable runtime PM by default"Ohad Ben-Cohen
When SDIO runtime PM was originally introduced, we immediately faced two regressions with two different chipsets, and in response decided not to enable it by default. With the recent work on the 8686 we hoped we found all the gotchas, so 08da834 did make sense (at least experimentally). Unfortunately we now see that some setups out there still refuse to work when SDIO runtime PM is enabled by default (see http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously we can't live with these kind of regressions. This reverts commit 08da834a24312157f512224691ad1fddd11c1073. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19mmc: sdhci: remove "state" argument from sdhci_suspend_hostManuel Lauss
Drop the "state" argument from sdhci_suspend_host. Its only user is the PCI glue; this allows to move all SDHCI glues to use dev_pm_ops instead. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-18ARM: 7220/1: mmc: mmci: Fixup error handling for dmaUlf Hansson
When getting a cmd irq during an ongoing data transfer with dma, the dma job were never terminated. This is now corrected. Cc: <stable@vger.kernel.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERRUlf Hansson
The interrupt was previously enabled and then correctly cleared. Now we also handle it correctly. Cc: <stable@vger.kernel.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-10mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not definedSujit Reddy Thumma
mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: sdhci-s3c: Remove old and misprototyped suspend operationsMark Brown
Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: tmio: fix clock gating on platforms with a .set_pwr() methodGuennadi Liakhovetski
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() methodGuennadi Liakhovetski
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix typo at mmc_card_sleepKyungmin Park
Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix power_off_notify during suspendGirish K S
The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Fix setting power notify state variable for non-eMMCGirish K S
This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: core: Add quirk for long data read timeStefan Nilsson XK
Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: Add module.h include to sdhci-cns3xxx.cChris Ball
Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: mxcmmc: fix falling back to PIOSascha Hauer
When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-07mmc: omap_hsmmc: DMA unmap only once in case of MMC errorPer Forlin
Reported by Russell King: mmcblk0: error -84 transferring data, sector 149201, nr 64, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read WARNING: at lib/dma-debug.c:811 check_unmap omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000080933000] [size=20480 bytes] In case of an error dma_unmap() is issued in omap_hsmmc_dma_cleanup() and then again in omap_hsmmc_post_req(). Resolve this by clearing the host_cookie to indicate there is no DMA mapped memory to unmap. Signed-off-by: Per Forlin <per.forlin@linaro.org> Tested-by: Balaji T K <balajitk@ti.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-11arm/imx: fix imx6q mmc error when mounting rootfsShawn Guo
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock: add MAINTAINERS entries hwspinlock/omap: omap_hwspinlock_remove should be __devexit hwspinlock/u8500: add hwspinlock driver hwspinlock/core: register a bank of hwspinlocks in a single API call hwspinlock/core: remove stubs for register/unregister hwspinlock/core: use a mutex to protect the radix tree hwspinlock/core/omap: fix id issues on multiple hwspinlock devices hwspinlock/omap: simplify allocation scheme hwspinlock/core: simplify 'owner' handling hwspinlock/core: simplify Kconfig Fix up trivial conflicts (addition of omap_hwspinlock_pdata, removal of omap_spinlock_latency) in arch/arm/mach-omap2/hwspinlock.c Also, do an "evil merge" to fix a compile error in omap_hsmmc.c which for some reason was reported in the same email thread as the "please pull hwspinlock changes".
2011-11-01Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h
2011-11-01Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
2011-10-31mmc: Fix implicit use of stat.h header in associated filesPaul Gortmaker
Once the implicit use of module.h is prevented, these files will fail to find the stat.h header content. Fix up the implicit usage expectations in advance of the cleanup. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31mmc: Add export.h for EXPORT_SYMBOL/THIS_MODULE as requiredPaul Gortmaker
These two basic defines were everywhere, simply because module.h was also everywhere. But we are cleaning up the latter. So make the exporters actually call out their need for the include. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31mmc: Add module.h to drivers/mmc users assuming implicit presence.Paul Gortmaker
We are cleaning up the implicit presence of module.h; these guys are some of the people who just assume it will be there. Call it out explitly for those that really need it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Merge branch 'depends/rmk/gpio' into next/develArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31Merge branch 'next/fixes' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-mxs/include/mach/gpio.h arch/arm/plat-mxc/include/mach/gpio.h drivers/video/omap/lcd_apollon.c drivers/video/omap/lcd_ldp.c drivers/video/omap/lcd_overo.c
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits) mmc: fix compile error when CONFIG_BLOCK is not enabled mmc: core: Cleanup eMMC4.5 conditionals mmc: omap_hsmmc: if multiblock reads are broken, disable them mmc: core: add workaround for controllers with broken multiblock reads mmc: core: Prevent too long response times for suspend mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00 mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode mmc: core: support HPI send command mmc: core: Add cache control for eMMC4.5 device mmc: core: Modify the timeout value for writing power class mmc: core: new discard feature support at eMMC v4.5 mmc: core: mmc sanitize feature support for v4.5 mmc: dw_mmc: modify DATA register offset mmc: sdhci-pci: add flag for devices that can support runtime PM mmc: omap_hsmmc: ensure pbias configuration is always done mmc: core: Add Power Off Notify Feature eMMC 4.5 mmc: sdhci-s3c: fix potential NULL dereference mmc: replace printk with appropriate display macro mmc: core: Add default timeout value for CMD6 mmc: sdhci-pci: add runtime pm support ...
2011-10-27mmc: core: Cleanup eMMC4.5 conditionalsSeungwon Jeon
Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27mmc: omap_hsmmc: if multiblock reads are broken, disable themPaul Walmsley
When device data indicates that multiple block reads are not supported on a given HSMMC controller instance, log a message to the console, and pass the appropriate MMC capability flag to the MMC core. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Tested-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27mmc: core: add workaround for controllers with broken multiblock readsPaul Walmsley
Due to hardware bugs, some MMC host controllers don't support multiple-block reads[1]. To resolve, add a new MMC capability flag, MMC_CAP2_NO_MULTI_READ, which can be set by affected host controller drivers. When this capability is set, all reads will be issued one sector at a time. 1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ Revision F (October 2010) (SPRZ278F), available from http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Tested-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27Merge branch 'clk' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'amba' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7079/1: spi: Fix builderror in spi-pl022.c PM: add runtime PM support to MMCI PM: add runtime PM support to core Primecell driver
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-26mmc: core: Prevent too long response times for suspendUlf Hansson
While trying to suspend the mmc host there could still be ongoing requests that we need to wait for. At the same time a device driver must respond to a suspend request rather quickly. Instead of potentially wait "forever" by claiming the host we now "try" to claim the host instead. If it fails, -EBUSY is returned. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00Bing Zhao
Table 6-2: CCCR bit Definitions, address 00h. Part E1 SDIO Simplified Specification Version 3.00, Feb. 25, 2011. This patch has been tested with Marvell WLAN device SD8797. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed modeSubhash Jadavani
Here is Essential conditions to indicate Version 3.00 Card (SD_SPEC=2 and SD_SPEC3=1) : (1) The card shall support CMD6 (2) The card shall support CMD8 (3) The card shall support CMD42 (4) User area capacity shall be up to 2GB (SDSC) or 32GB (SDHC) User area capacity shall be more than or equal to 32GB and up to 2TB (SDXC) (5) Speed Class shall be supported (SDHC or SDXC) So even if SD card doesn't support any of the newly defined UHS-I bus speed mode, it can advertise itself as SD3.0 cards as long as it supports all the essential conditions of SD3.0 cards. Given this, these type of cards should atleast run in High Speed mode @50MHZ if it supports HS. But current initialization sequence for SD3.0 cards is such that these non-UHS-I SD3.0 cards runs in Default Speed mode @25MHz. This patch makes sure that these non-UHS-I SD3.0 cards run in High Speed Mode @50MHz. Tested this patch with SanDisk Extreme SDHC 8GB Class 10 card. Reported-by: "Hiremath, Vaibhav" <hvaibhav@ti.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-03-27 15:49:25 +0000