aboutsummaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2013-03-15VMCI: Fix process-to-process DRGAMs.Andy King
When sending between processes, we always schedule a work item. Our work info struct has the message embedded in the middle, which means that we end up overwriting subsequent fields when we copy the (variable-length) message into it. Move it to the end of the struct. Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15mei: ME hardware reset needs to be synchronizedTomas Winkler
This fixes failure during initialization on Lynx Point LP devices. ME driver needs to release the device from the reset only after the FW has completed its flow and indicated it by delivering an interrupt to the host. This is the correct behavior for all the ME devices yet the the previous versions are less susceptive to the implementation that ignored FW reset completion indication. We add mei_me_hw_reset_release function which is called after reset from the interrupt thread or directly from mei_reset during power down. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15mei: add mei_stop function to stop mei deviceTomas Winkler
mei_stop calls mei_reset with disabling the interrupts. It will have the same effect as the open code it replaces in the mei_remove. The reset sequence on remove is required for the Lynx Point LP devices to clean the reset state. mei_stop is called from mei_pci_suspend and mei_remove functions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-03fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-02Merge tag 'for_linux-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "For a change we removed more code than we added. If people aren't using it we shouldn't be carrying it. :-) Cleanups: - Remove kdb ssb command - there is no in kernel disassembler to support it - Remove kdb ll command - Always caused a kernel oops and there were no bug reports so no one was using this command - Use kernel ARRAY_SIZE macro instead of array computations Fixes: - Stop oops in kdb if user executes kdb_defcmd with args - kdb help command truncated text - ppc64 support for kgdbts - Add missing kconfig option from original kdb port for dealing with catastrophic kernel crashes such that you can reboot automatically on continue from kdb" * tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Remove unhandled ssb command kdb: Prevent kernel oops with kdb_defcmd kdb: Remove the ll command kdb_main: fix help print kdb: Fix overlap in buffers with strcpy Fixed dead ifdef block by adding missing Kconfig option. kdb: Setup basic kdb state before invoking commands via kgdb kdb: use ARRAY_SIZE where possible kgdb/kgdbts: support ppc64 kdb: A fix for kdb command table expansion
2013-03-02kgdb/kgdbts: support ppc64Tiejun Chen
We can't look up the address of the entry point of the function simply via that function symbol for all architectures. For PPC64 ABI, actually there is a function descriptors structure. A function descriptor is a three doubleword data structure that contains the following values: * The first doubleword contains the address of the entry point of the function. * The second doubleword contains the TOC base address for the function. * The third doubleword contains the environment pointer for languages such as Pascal and PL/1. So we should call a wapperred dereference_function_descriptor() to get the address of the entry point of the function. Note this is also safe for other architecture after refer to "include/asm-generic/sections.h" since: dereference_function_descriptor(p) always is (p) if without arched definition. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27misc/tifm_core: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27misc/c2port: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21Merge tag 'sound-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The biggest change in this update is the unification of HD-audio codec parsers. Now the HD-audio codec is parsed in a generic parser code which is invoked by each HD-audio codec driver. Some background information is found in David Henningsson's blog entry: http://voices.canonical.com/david.henningsson/2013/01/18/upcoming-changes-to-the-intel-hda-drivers/ Other than that, some random updates/fixes like USB-audio and a bunch of small AoC updates as usual. Highlights: - Unification of HD-audio parser code (aka generic parser) - Support of new Intel HD-audio controller, new IDT codecs - Fixes for HD-audio HDMI audio hotplug - Haswell HDMI audio fixup - Support of Creative CA0132 DSP code - A few fixes of HDSP driver - USB-audio fix for Roland A-PRO, M-Audio FT C600 - Support PM for aloop driver (and fixes Oops) - Compress API updates for gapless playback support For ASoC part: - Support for a wider range of hardware in the compressed stream code - The ability to mute capture streams as well as playback streams while inactive - DT support for AK4642, FSI, Samsung I2S and WM8962 - AC'97 support for Tegra - New driver for max98090, replacing the stub which was there - A new driver from Dialog Note that due to dependencies, DTification of DMA support for Samsung platforms (used only by the and I2S driver and SPI) is merged here as well." Fix up trivial conflict in drivers/spi/spi-s3c64xx.c due to removed code being changed. * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (453 commits) ALSA: usb: Fix Processing Unit Descriptor parsers ALSA: hda - hdmi: Notify userspace when ELD control changes ALSA: hda - hdmi: Protect ELD buffer ALSA: hda - hdmi: Refactor hdmi_eld into parsed_hdmi_eld ALSA: hda - hdmi: Do not expose eld data when eld is invalid ALSA: hda - hdmi: ELD shouldn't be valid after unplug ALSA: hda - Fix the silent speaker output on Fujitsu S7020 laptop ALSA: hda - add quirks for mute LED on two HP machines ALSA: usb/quirks, fix out-of-bounds access ASoC: codecs: Add da7213 codec ALSA: au88x0 - Define channel map for au88x0 ALSA: compress: add support for gapless playback ALSA: hda - Remove speaker clicks on CX20549 ALSA: hda - Disable runtime PM for Intel 5 Series/3400 ALSA: hda - Increase badness for missing multi-io ASoC: arizona: Automatically manage input mutes ALSA: hda - Fix broken workaround for HDMI/SPDIF conflicts ALSA: hda/ca0132 - Add missing \n to debug prints ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESS ALSA: hda - update documentation for no-primary-hp fixup ...
2013-02-11x86, uv, uv3: Check current gru hub support for SGI UV3Mike Travis
This patch checks current hub support to avoid panicing the system until all the GRU changes for UV3+ are in place. Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194509.035828372@gulag1.americas.sgi.com Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-11Merge remote-tracking branch 'asoc/topic/atmel' into asoc-nextMark Brown
2013-02-08drivers/misc/cb710: add missing GENERIC_HARDIRQS dependencyHeiko Carstens
CB710_CORE (drivers/misc/cb710/core.c) calls devm_request_irq() and therefore needs a GENERIC_HARDIRQS dependency to prevent a link error on s390. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-07mei: fix undefined wd symbols when MEI_ME is not setTomas Winkler
Currently watchdog client is compiled with MEI and not with MEI_ME Fixes error: When CONFIG_WATCHDOG is not enabled: ERROR: "watchdog_unregister_device" [drivers/misc/mei/mei.ko] undefined! ERROR: "watchdog_register_device" [drivers/misc/mei/mei.ko] undefined Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: move clients cleanup code from init.c to client.cTomas Winkler
during reset we clean up client data structures we move that code into wrappers in client and call the wrappers Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: rename to mei_host_buffer_is_empty to hbuf_is_readyTomas Winkler
we rename the mei_host_buffer_is_empty to keep naming convention of hbuf and also make the query more generic to be correct also for other under laying hardware Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: move interrupt handlers to be me hw specificTomas Winkler
interrupt handler are platform specifics so we move them to hw-mei.c. For sake of that we need to export write, read, and complete handlers from the interrupt.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: separate compilation of the ME hardware specificsTomas Winkler
We add struct mei_hw_ops to virtualize access to hw specific configurations. This allows us to separate the compilation of the ME interface from the ME hardware specifics Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: initial extract of ME hw specifics from mei_deviceTomas Winkler
This is initial step of move the ME hw specifics out of mei_device structure into mei_me_hw Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06mei: sperate interface and pci code into two filesTomas Winkler
leave misc file operations in the main and move PCI related code into pci-me Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-28drivers: misc: at24: mention other supported types in KconfigLars Poeschel
As the at24 driver is able handle a bunch of serial storage chips other than EEPROMs this is now mentioned in Kconfig. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25drivers, vmci: Fix build errorDavid Rientjes
We can't rely on vmalloc.h being included by other included files because under some configs it is possible for the build to fail: drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_free_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:270: error: implicit declaration of function 'vunmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:277: error: implicit declaration of function 'vfree' drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_alloc_queue': drivers/misc/vmw_vmci/vmci_queue_pair.c:302: error: implicit declaration of function 'vmalloc' drivers/misc/vmw_vmci/vmci_queue_pair.c:302: warning: assignment makes pointer from integer without a cast drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: implicit declaration of function 'vmap' drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: 'VM_MAP' undeclared (first use in this function) drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: (Each undeclared identifier is reported only once drivers/misc/vmw_vmci/vmci_queue_pair.c:324: error: for each function it appears in.) drivers/misc/vmw_vmci/vmci_queue_pair.c: In function 'qp_host_map_queues': drivers/misc/vmw_vmci/vmci_queue_pair.c:843: error: 'VM_MAP' undeclared (first use in this function) Fix the build by directly including vmalloc.h. Signed-off-by: David Rientjes <rientjes@google.com> Cc: George Zhang <georgezhang@vmware.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22misc: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22VMCI: Fix broken context ID retrievalAndy King
I'm an idiot. The context ID can be a really large unsigned number, which means it'll appear negative as an int. So actually the right fix here is just to set it regardless of the returned value (but only for this particular hypercall; normally we would check it). Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18Merge 3.8-rc4 into char-misc-nextGreg Kroah-Hartman
This brings in all of the mei and other fixes that are needed to continue development in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: include slab.h into files using kmalloc/kfreeDmitry Torokhov
Do not rely on implicit header dependencies as they are known to break. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: rename PPNset to ppn_set to avoid camel caseDmitry Torokhov
Acked-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Fix "always true condition"Andy King
vmci_send_datagram() returns an int, with negative values indicating failure. But we store it locally in a u32, which makes comparison of >= 0 useless. Fixed to use an int. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Fix deref before NULL-check of queuepair ptrAndy King
Check for a valid queuepair ptr before trying to lock the queuepair (which will deref it). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Remove dependency on BLOCK I/OAndy King
No need to bring in dm-mapper.h and along with it a dependency on BLOCK I/O just to use dm_div_up(). Just use the existing DIV_ROUND_UP(). Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17VMCI: Add PCI as a dependencyAndy King
Add PCI as a dependency to our build, since we always compile in the guest-side PCI device support. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mei: Fix some more kernel-doc typos in hw-me.cSedat Dilek
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: lattice-ecp3-config.c: remove __dev* markingsGreg Kroah-Hartman
These are now removed from the kernel, so remove them to allow the driver to build properly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: Add Lattice ECP3 FPGA configuration via SPIStefan Roese
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus. Here an example on my custom MPC5200 based board: $ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading leads to these messages: lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured! Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17misc: st_core: Error triggered by convert "char" to "int"channing
When st driver decodes protocol index received from raw data, it does a value convert from "char" to "int". Because it's sign extension from bit8 to bit32, the "int" value maybe minus, in another word, the protocol index might be minus, but driver doesn't filter such case and may continue access memory pointed by this minus index. This patch is to change the variable type of index from "int" to "unsigned char", so that it avoids do such kind of type conversion. cc: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: channing <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16Merge tag 'sound-3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull second round of sound fixes from Takashi Iwai: "Yet a few more fixes popped up in this week. The biggest change here is the addition of pinctrl support for Atmel, which turned out to be almost mandatory to make things working. The rest are a few fixes for M-Audio usb-audio device and a fix for regression of HD-audio HDMI codecs with alsactl in the recent kernel." * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi - Work around "alsactl restore" errors ALSA: usb-audio: selector map for M-Audio FT C400 ALSA: usb-audio: M-Audio FT C400 skip packet quirk ALSA: usb-audio: correct M-Audio C400 clock source quirk ALSA: usb - fix race in creation of M-Audio Fast track pro driver ASoC: atmel-ssc: add pinctrl selection to driver ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-14mei: drop the warning when cl is not initialized during unlinkingTomas Winkler
On systems where wd and amthif is not initialized we will hit cl->dev == NULL. This condition is okay so we don't need to be laud about it. Fixes the follwing warning during suspend [ 137.061985] WARNING: at drivers/misc/mei/client.c:315 mei_cl_unlink+0x86/0x90 [mei]() [ 137.061986] Hardware name: 530U3BI/530U4BI/530U4BH [ 137.062140] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek joydev coretemp kvm_intel snd_hda_intel snd_hda_codec kvm arc4 iwldvm snd_hwdep i915 snd_pcm mac80211 ghash_clmulni_intel snd_page_alloc aesni_intel snd_seq_midi xts snd_seq_midi_event aes_x86_64 rfcomm snd_rawmidi parport_pc bnep lrw snd_seq uvcvideo i2c_algo_bit ppdev gf128mul iwlwifi snd_timer drm_kms_helper ablk_helper cryptd drm snd_seq_device videobuf2_vmalloc psmouse videobuf2_memops snd cfg80211 btusb videobuf2_core soundcore videodev lp bluetooth samsung_laptop wmi microcode mei serio_raw mac_hid video hid_generic lpc_ich parport usbhid hid r8169 [ 137.062143] Pid: 2706, comm: kworker/u:15 Tainted: G D W 3.8.0-rc2-next20130109-1-iniza-generic #1 [ 137.062144] Call Trace: [ 137.062156] [<ffffffff8105860f>] warn_slowpath_common+0x7f/0xc0 [ 137.062159] [<ffffffff8135b1ea>] ? ioread32+0x3a/0x40 [ 137.062162] [<ffffffff8105866a>] warn_slowpath_null+0x1a/0x20 [ 137.062168] [<ffffffffa0076be6>] mei_cl_unlink+0x86/0x90 [mei] [ 137.062173] [<ffffffffa0071325>] mei_reset+0xc5/0x240 [mei] [ 137.062178] [<ffffffffa0073703>] mei_pci_resume+0xa3/0x110 [mei] [ 137.062183] [<ffffffff81379cae>] pci_pm_resume+0x7e/0xe0 [ 137.062185] [<ffffffff81379c30>] ? pci_pm_thaw+0x80/0x80 [ 137.062189] [<ffffffff8145a415>] dpm_run_callback.isra.6+0x25/0x50 [ 137.062192] [<ffffffff8145a6cf>] device_resume+0x9f/0x140 [ 137.062194] [<ffffffff8145a791>] async_resume+0x21/0x50 [ 137.062200] [<ffffffff810858b0>] async_run_entry_fn+0x90/0x1c0 [ 137.062203] [<ffffffff810778e5>] process_one_work+0x155/0x460 [ 137.062207] [<ffffffff81078578>] worker_thread+0x168/0x400 [ 137.062210] [<ffffffff81078410>] ? manage_workers+0x2b0/0x2b0 [ 137.062214] [<ffffffff8107d9f0>] kthread+0xc0/0xd0 [ 137.062218] [<ffffffff8107d930>] ? flush_kthread_worker+0xb0/0xb0 [ 137.062222] [<ffffffff816bac6c>] ret_from_fork+0x7c/0xb0 [ 137.062228] [<ffffffff8107d930>] ? flush_kthread_worker+0xb0/0xb0 Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12ASoC: atmel-ssc: add pinctrl selection to driverBo Shen
Add default pinctrl selection to atmel-ssc driver. The pinctrl is mandatory. Signed-off-by: Bo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08mei: move work initialization to mei_device_initTomas Winkler
Let mei_device_init initialize all the software constructs. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08mei: make host csr and me csr internal to hw-meTomas Winkler
Move csr reading into me hardware functional calls. Since we gave up on registers caching we remove some of the unnecessary queries in mei_hw_init ane mei_reset functions. We add mei_hw_config function to wrap up host buffer depth configuration. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>