aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2012-05-23Merge tag 'regmap-domain-deps' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull a regmap kconfig dependency fix from Mark Brown: "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core Fixes a missing select from the Palmas driver a bit more throoughly." * tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Use select .. if to get IRQ_DOMAIN enabled
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-23regmap: Use select .. if to get IRQ_DOMAIN enabledMark Brown
Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN select automatically. Don't just do the select from REGMAP_IRQ to ensure that the select actually gets noticed. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-21Merge tag 'regulator-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
2012-05-19mfd: tpx6586x: Depend on regulatorMark Brown
Some of the OF binding stuff is done in the MFD. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mfd: palmas PMIC device support KconfigGraeme Gregory
Add the new palmas MFD to Kconfig and Makefile Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mfd: palmas PMIC device supportGraeme Gregory
Palmas is a PMIC from Texas Instruments and this is the MFD part of the driver for this chip. The PMIC has SMPS and LDO regulators, a general purpose ADC, GPIO, USB OTG mode detection, watchdog and RTC features. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18mfd: mc13xxx: add codec platform dataPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15mfd: wm8994: Update to fully use irq_domainMark Brown
Take advantage of the new regmap irq_domain support to dynamically allocate interrupts, using regmap_irq_get_virq() rather than irq_base to look up the interrupts. This means that most users should not need to specify an irq_base at all. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-13regmap: Convert regmap_irq to use irq_domainMark Brown
This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge branches 'regmap-core', 'regmap-stride', 'regmap-mmio' and ↵Mark Brown
'regmap-irq' into regmap-next
2012-05-13mfd: da9052: Fix genirq abuseMark Brown
Rather than using the pointer passed back by the regmap API (or complaining because that wasn't actually being set) the da9052 driver was having some fun and games peering through genirq and regmap internals. Fix the driver to use the API as expected. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge remote-tracking branch 'regulator/topic/drivers' into regulator-nextMark Brown
Conflicts: drivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)
2012-05-12Merge remote-tracking branches 'regulator/topic/core', ↵Mark Brown
'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next
2012-05-09Merge tag 'v3.4-rc6' into next/cleanupOlof Johansson
Linux 3.4-rc6 Resolve conflict where an u5500 file had a bugfix go in, but was deleted in the branch staged for next merge window. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09mfd: twl: define all feature flags in one place.NeilBrown
twl-regulator has a collection of feature flags, some defined in twl-core.c and one defined in i2c/twl.h. This is confusing for anyone adding a new feature flag. So collect them together and place them in twl.h immediately after the structure in which they are initially set. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-04tps6586x: Add device tree supportThierry Reding
This commit adds device tree support for the TPS6586x regulator. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-02mfd/ab5500: delete AB5500 supportLinus Walleij
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02mfd/db5500-prcmu: delete DB5500 PRCMU supportLinus Walleij
This platform has been obsoleted and was only available inside of ST-Ericsson, no users of this code are left in the world. This deletes the core U5500 support entirely in the same manner as the obsoleted U8500 silicon was previously deleted. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-01mfd: Fix build breakage in omap-usb-host.cRuss Dill
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-18regulator: tps65090: Use generic regmap enable/disable operationsAxel Lin
This patch converts tps65090 regulator driver to use generic regmap enable/disable operations. Also move struct tps65090 to include/linux/mfd/tps65090.h because the regulator driver needs to access the rmap field of struct tps65090. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-17mfd: Revert "mfd: add irq domain support for max8997 interrupts"Mark Brown
This reverts commit 98d8618af37728f6e18e84110ddb99987b47dd12 as it breaks the build of the muic driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16mfd: Fix modular builds of rc5t583 regulator supportPaul Gortmaker
The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 "mfd: Add support for RICOH PMIC RC5T583" and commit 6ffc3270210efa2bea526953a142ffc908f5bd86 "regulator: Add support for RICOH PMIC RC5T583 regulator" are causing the i386 allmodconfig builds to fail with this: ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined! and this: ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined! For the 1st four, make the simple ops static inline, instead of polluting the namespace with trivial exports. For the last one, add an EXPORT_SYMBOL. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16mfd: add irq domain support for max8997 interruptsThomas Abraham
Add irq domain support for max8997 interrupts. The reverse mapping method used is linear mapping since the sub-drivers of max8997 such as regulator and charger drivers can use the max8997 irq_domain to get the linux irq number for max8997 interrupts. All uses of irq_base in platform data and max8997 driver private data are removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-16mfd: Fix asic3_gpio_to_irqDmitry Artamonow
Assumption that irq numbers of asic3 gpios start at IRQ_BOARD_START is certainly wrong - driver may as well use any other base for its irqs (consider for example the imaginary case of two ASIC3 chips onboard) Furthermore, some platforms even don't have IRQ_BOARD_START defined, so driver will fail to build on them: ------------------------------------------------------- drivers/mfd/asic3.c: In function 'asic3_gpio_to_irq': drivers/mfd/asic3.c:530: error: 'IRQ_BOARD_START' undeclared (first use in this function) drivers/mfd/asic3.c:530: error: (Each undeclared identifier is reported only once drivers/mfd/asic3.c:530: error: for each function it appears in.) ------------------------------------------------------- Fix it by using irq_base from driver data. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issueKeshava Munegowda
It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Reviewed-by: Partha Basak <parthab@india.ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16Fix typo in various Kconfig fileMasanari Iida
Correct spelling typo in various Kconfig file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-13ARM: 7366/3: amba: Remove AMBA level regulator supportMark Brown
The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-08Merge branch 'master' into for-nextJiri Kosina
Merge with latest Linus' tree, as I have incoming patches that fix code that is newer than current HEAD of for-next. Conflicts: drivers/net/ethernet/realtek/r8169.c
2012-04-05Fix typo milivolt => millivoltThomas Weber
Signed-off-by: Thomas Weber <thomas@tweber.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge tag 'mfd_3.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-25Merge branch 'sa11x0-mcp' into sa11x0Russell King
Conflicts: arch/arm/mach-sa1100/assabet.c arch/arm/mach-sa1100/collie.c arch/arm/mach-sa1100/generic.c arch/arm/mach-sa1100/lart.c arch/arm/mach-sa1100/shannon.c
2012-03-24Merge tag 'device-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/device.h> avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit <linux/device.h> users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)
2012-03-22Merge tag 'regmap-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Things are really quieting down with the regmap API, while we're still seeing a trickle of new features coming in they're getting much smaller than they were. It's also nice to have some features which support other subsystems building infrastructure on top of regmap. Highlights include: - Support for padding between the register and the value when interacting with the device, sometimes needed for fast interfaces. - Support for applying register updates to the device when restoring the register state. This is intended to be used to apply updates supplied by manufacturers for tuning the performance of the device (many of which are to undocumented registers which aren't otherwise covered). - Support for multi-register operations on cached registers. - Support for syncing only part of the register cache. - Stubs and parameter query functions intended to make it easier for other subsystems to build infrastructure on top of the regmap API. plus a few driver updates making use of the new features which it was easier to merge via this tree." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits) regmap: Fix future missing prototype of devres_alloc() and friends regmap: Rejig struct declarations for stubbed API regmap: Fix rbtree block base in sync regcache: Make sure we sync register 0 in an rbtree cache regmap: delete unused module.h from drivers/base/regmap files regmap: Add stub for regcache_sync_region() mfd: Improve performance of later WM1811 revisions regmap: Fix x86_64 breakage regmap: Allow drivers to sync only part of the register cache regmap: Supply ranges to the sync operations regmap: Add tracepoints for cache only and cache bypass regmap: Mark the cache as clean after a successful sync regmap: Remove default cache sync implementation regmap: Skip hardware defaults for LZO caches regmap: Expose the driver name in debugfs mfd: wm8400: Convert to devm_regmap_init_i2c() mfd: wm831x: Convert to devm_regmap_init() mfd: wm8994: Convert to devm_regmap_init() mfd/ASoC: Convert WM8994 driver to use regmap patches mfd: Add __devinit and __devexit annotations in wm8994 ...
2012-03-22mfd: Detach twl6040 from the pmic mfd driverPeter Ujfalusi
On OMAP4 platform audio has separate IC, it is no longer part of the pmic chip. Prevent twl-core to claim the 0x4b address, which belongs to the twl6040 audio IC. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanupsBenoit Cousson
Since a structure device is available now, use the dev_ macros instead of the pr_ ones. Clean some badly formatted comments. Remove some unused variables. Move some variable to the place they belong. Clean some badly wrapped lines. Align variable definition Add missing braces in if-then-else block. Add blank line for better readability. Move stuff here and there... Conflicts: drivers/mfd/twl-core.c Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Micro-optimization on twl4030 IRQ handlerFelipe Balbi
__ffs() will be far faster than the for loop used. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Make twl4030 SIH SPARSE_IRQ capableBenoit Cousson
twl4030 is using a two level irq controllers infrastruture. So far, only the first level was using dynamic irq_desc allocation to be able to have irq_domain support for device tree. There is a need to allocate separate irq_descs for the SIH too to avoid hacking the first level with interrupts from the second level. Add an irq_base parameter to allow the caller to provide the base from pdata or from dynamic allocation. Affect TWL4030_NR_IRQS to the twl-core IRQs only. Moreover that will allow the extraction of the of_node pointer for further Device Tree conversion. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq filesBenoit Cousson
During DT adaptation, the irq_alloc_desc was added into twl-core, but due to the rather different and weird IRQ management required by the twl4030, it is much better to have a different approach for it. The issue is that twl4030 uses a two level IRQ mechanism but handles all the PWR interrupts as part of the twl-core interrupt range. It ends up with a range of 16 interrupts total for CORE and PWR. The other twl4030 functionalities already have a dedicated driver and thus their IRQs and irqdomain can and should be defined localy. twl6030 is using a single level IRQ controller and thus does not require any trick. Move the irq_alloc_desc and irq_domain_add_legacy in twl4030-irq and twl6030-irq. Allocate together CORE and PWR IRQs for twl4030-irq. Conflicts: drivers/mfd/twl-core.c Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Remove references already defineid in header file from twl-coreBenoit Cousson
The twl-core exported functions are already declared in twl-core.h Include the header file instead or re-declaring the functions. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Remove unneeded header from twl-coreFelipe Balbi
This driver doesn't really need <plat/cpu.h>, so remove it. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-22mfd: Make twl-core not depend on pdata->irq_base/endFelipe Balbi
With sparse IRQs the driver shouldn't depend at all on any IRQ values coming from board-file. Remove every occurences of pdata->irq_base/end. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>