aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ams_delta_serio - include linux/module.h Input: elantech - adjust hw_version detection logic Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
2011-11-09Input: ams_delta_serio - include linux/module.hAaro Koskinen
Fix the following compilation failure with v3.2-rc1 by including module.h: CC drivers/input/serio/ams_delta_serio.o drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init': drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function) drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-09Input: elantech - adjust hw_version detection logicJJ Ding
This patch fixes some v3 hardware (fw_version: 0x150500) wrongly detected as v2 hardware. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Tested-By: Marc Dietrich <marvin24@gmx.de> Acked-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-05Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklistsTomas Miljenović
Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic <TomasM@tomasm.tk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-03Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
2011-11-02Merge branch 'for-linus' of git://github.com/richardweinberger/linuxLinus Torvalds
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits) um: fix ubd cow size um: Fix kmalloc argument order in um/vdso/vma.c um: switch to use of drivers/Kconfig UserModeLinux-HOWTO.txt: fix a typo UserModeLinux-HOWTO.txt: remove ^H characters um: we need sys/user.h only on i386 um: merge delay_{32,64}.c um: distribute exports to where exported stuff is defined um: kill system-um.h um: generic ftrace.h will do... um: segment.h is x86-only and needed only there um: asm/pda.h is not needed anymore um: hw_irq.h can go generic as well um: switch to generic-y um: clean Kconfig up a bit um: a couple of missing dependencies... um: kill useless argument of free_chan() and free_one_chan() um: unify ptrace_user.h um: unify KSTK_... um: fix gcov build breakage ...
2011-11-02um: switch to use of drivers/KconfigAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-10-31drivers/input: add export.h to symbol exporting files.Paul Gortmaker
These files are not modules but are exporting symbols and/or making use of THIS_MODULE macro. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31drivers/input: Add module.h to modular drivers implicitly using itPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in input dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits) [media] pctv452e: Remove bogus code [media] adv7175: Make use of media bus pixel codes [media] media: vb2: fix incorrect return value [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES [media] cx23885: Stop the risc video fifo before reconfiguring it [media] cx23885: Avoid incorrect error handling and reporting [media] cx23885: Avoid stopping the risc engine during buffer timeout [media] cx23885: Removed a spurious function cx23885_set_scale() [media] cx23885: v4l2 api compliance, set the audioset field correctly [media] cx23885: hook the audio selection functions into the main driver [media] cx23885: add generic functions for dealing with audio input selection [media] cx23885: fixes related to maximum number of inputs and range checking [media] cx23885: Initial support for the MPX-885 mini-card [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use [media] cx23885: Enable audio line in support from the back panel [media] cx23885: Allow the audio mux config to be specified on a per input basis [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs [media] cx23885: Name an internal i2c part and declare a bitfield by name [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming [media] cx23885: remove channel dump diagnostics when a vbi buffer times out ... Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header file rename vs add)
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (68 commits) Input: adp5589-keys - add support for the ADP5585 derivatives Input: imx_keypad - add pm suspend and resume support Input: force feedback - potential integer wrap in input_ff_create() Input: tsc2007 - make sure that X plate resistance is specified Input: serio_raw - fix memory leak when closing char device Input: serio_raw - kick clients when disconnecting port Input: serio_raw - explicitly mark disconnected ports as dead Input: serio_raw - fix coding style issues Input: serio_raw - use dev_*() for messages Input: serio_raw - use bool for boolean data Input: serio_raw - perform proper locking when adding clients to list Input: serio_raw - rename serio_raw_list to serio_raw_client Input: serio_raw - use kref instead of rolling out its own refcounting Input: psmouse - switch to using dev_*() for messages Input: wacom - correct max Y value on medium bamboos Input: wacom - add ABS_DISTANCE to Bamboo Pen reports Input: wacom - remove unneeded touch pressure initialization Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEP Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEP ...
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-26Merge branch 'next' into for-linusDmitry Torokhov
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24input: Add power button support for mc13783Philippe Rétornaz
This adds support for the power-on buttons of MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24input: Convert mc13783-ts to mc13xxx APIUwe Kleine-König
This is the first step to also support the touch interface of the mc13892 pmic chip. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-18Input: adp5589-keys - add support for the ADP5585 derivativesMichael Hennerich
The ADP5585 family keypad decoder and IO expander is similar to the ADP5589, however it features less IO pins, and lacks hardware assisted key-lock functionality. Unfortunately the register addresses are different, as well as the event codes and bit organization within the port related registers. Move ADP5589 Register defines from the header file into the main source file. Add new defines while making sure we don't break existing platform_data. Add register address translation, and turn device specific defines into variables. Introduce some helper functions and disable functions that doesn't exist on the added devices. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-12Input: imx_keypad - add pm suspend and resume supportHui Wang
The imx_keypad driver was indicating that it was wakeup capable in imx_keypad_probe(), but it didn't implement suspend or resume methods. According to the i.MX series MCU Reference Manual, the kpp (keypad port) is a major wake up source which can detect any key press even in low power mode and even when there is no clock. Signed-off-by: Hui Wang <jason77.wang@gmail.com> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-12Input: force feedback - potential integer wrap in input_ff_create()Dan Carpenter
The problem here is that max_effects can wrap on 32 bits systems. We'd allocate a smaller amount of data than sizeof(struct ff_device). The call to kcalloc() on the next line would fail but it would write the NULL return outside of the memory we just allocated causing data corruption. The call path is that uinput_setup_device() get ->ff_effects_max from the user and sets the value in the ->private_data struct. From there it is: -> uinput_ioctl_handler() -> uinput_create_device() -> input_ff_create(dev, udev->ff_effects_max); I've also changed ff_effects_max so it's an unsigned int instead of a signed int as a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-12Input: twl6040-vibra: Check the selected path for vibraPeter Ujfalusi
The VIBSELL/R bit in the VIBCTLL/R register tells the source of the data, which is going to be used to drive the attached motor(s). Do not allow effect execution if any of the channels are set to receive audio data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12Input: twl6040: Simplify vibra regsiter definitionsPeter Ujfalusi
The bits within the two control registers (for left and right channel) are identical. Use common names for the bits acros the two register. Also add the missing definition for the path selection bit. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11Input: tsc2007 - make sure that X plate resistance is specifiedPhilip Rakity
Abort driver initialization if X plate resistance was not specified in platform data as it will cause pressure to be always calculated as 0, and making userspace ignore touch coordinates. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - fix memory leak when closing char deviceDmitry Torokhov
Apparently we never freed memory allocated when users open our char devices nor removed old users from the list of connected clients. Also unregister misc device immediately upon disconnecting the port instead of waiting until last user drops off (refcounting in misc device code will make sure needed pieces stay around while they are needed) and make sure we are not holing holding serio_raw_mutex when registering/unregistering misc device. This should fix potential deadlock between serio_raw and misc device code uncovered by lockdep and reported by Thomas Tuttle. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - kick clients when disconnecting portDmitry Torokhov
Send SIGIO/POLL_HUP and otherwise wake up waiters when corresponding serio port is being disconnected. Also check if port is dead in serio_raw_poll and signal POLLHUP|POLLERR. This should speed up process of releasing dead devices by userspace applications. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - explicitly mark disconnected ports as deadDmitry Torokhov
Instead of relying on setting serio_raw->serio to NULL upon disconnecting ports mark them explicitly as "dead". Also take and carry reference to underlying serio port to make sure it does not go away until we are done with it. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - fix coding style issuesDmitry Torokhov
This makes checkpatch.pl happy with the driver Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - use dev_*() for messagesDmitry Torokhov
This will ensure our reporting is consistent with the rest of the system. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - use bool for boolean dataDmitry Torokhov
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - perform proper locking when adding clients to listDmitry Torokhov
Make sure we hold serio lock when adding clients to client list so that we do not race with serio_raw_release() removing clients from the same list. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - rename serio_raw_list to serio_raw_clientDmitry Torokhov
'serio_raw_list' and 'list' names do not accurately represent their objects and are extremely confusing when reading the code. Let's use better suited names. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: serio_raw - use kref instead of rolling out its own refcountingDmitry Torokhov
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: psmouse - switch to using dev_*() for messagesDmitry Torokhov
This will ensure our reporting is consistent with the rest of the system and we do not refer to obsolete source file names. Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: JJ Ding <dgdunix@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: wacom - correct max Y value on medium bamboosChris Bagwell
Medium size Bamboo P&T driver reused max X/Y form older Bamboo 1 medium size tablets and never updated to real value. Actual active area of tablet is slightly larger in Y direction. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: wacom - add ABS_DISTANCE to Bamboo Pen reportsChris Bagwell
Tablet reports a distance of 0 right at highest point possible to be in proximity and distance_max when touching tablet. Inverse the distance since user land has no way of knowing ABS_DISTANCE is not distance from tablet. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10Input: wacom - remove unneeded touch pressure initializationChris Bagwell
These were left in during removal of touch pressure reports but not needed now. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEPDmitry Torokhov
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): lm8323.c: warning: 'lm8323_resume' defined but not used Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEPDmitry Torokhov
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in the context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): ad7879-i2c.c: warning: 'ad7879_i2c_resume' defined but not used Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEPDmitry Torokhov
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined, however suspend and resume methods are only valid in context of CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following warning (courtesy of Geerts randconfig builds): synaptics_i2c.c: warning: 'synaptics_i2c_resume' defined but not used Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: mma8450 - silence some 'uninitialized variable' warningsDmitry Torokhov
Sometimes GCC is not smart enough to recognize that x, y and z are always used properly initialized in mma8450_poll(). Let's rearrange the code a bit to help GCC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06Input: atmel_mxt_ts - use snprintf for sysfs attribute show methodDaniel Kurtz
Sysfs attribute show methods are always passed a buffer of length PAGE_SIZE. To keep from overwriting this buffer and causing havoc, use snprintf() to guarantee we never write more than the buffer can hold. In addition, at least for my touchscreen, the number and size of objects was far too big to fit in a single 4K page. Therefore, this patch also trims some redundant framing text to leave more room for actual data. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05Merge branch 'for-linus' of git://github.com/dtor/inputLinus Torvalds
* 'for-linus' of git://github.com/dtor/input: Input: wacom - revert "Cintiq 21UX2 does not have menu strips"
2011-10-05Input: wacom - make LED status readable through sysfsPing Cheng
Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at> Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05Input: wacom - add LED support for Cintiq 21ux2Ping Cheng
Cintiq 21ux2 has two sets of four LEDs on right and left side of the tablet, respectively. Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at> Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05Input: wacom - don't expose LED inactive optionPing Cheng
The LED also indicates the status of the tablet. Don't turn it off. Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at> Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05Input: wacom - lower the LED luminancePing Cheng
The LED luminance level is normally lower when no button is pressed. Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at> Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-04Input: wacom - revert "Cintiq 21UX2 does not have menu strips"Jason Gerecke
This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2. The 21UX2 does have touchstrips, but they are in a somewhat- hidden location. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28Input: add a driver for TSC-40 serial touchscreenSebastian Andrzej Siewior
This patch adds the TSC-40 serial touchscreen driver and should be compatible with TSC-10 and TSC-25. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>