aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2011-03-31Input: spear-keyboard - fix inverted condition in interrupt handlerRajeev Kumar
We should return IRQ_NONE from interrupt handler in case keyboard does not report DATA_AVAIL condition. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-18Merge branch 'next' into for-linusDmitry Torokhov
2011-03-15Input: tc3589x-keypad - fix 'double const' warningDmitry Torokhov
Also rearrange driver structure initializer a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-15Input: tca6416-keypad - suspend/resume wakeup supportMagnus Damm
Extend the tca6416 driver to use enable_irq_wake() and disable_irq_wake() in the suspend/resume hooks. This makes it possible to wake up from suspend-to-ram using a tca6416 key on the sh7372 mackerel board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-13Input: add Atmel AT42QT1070 keypad driverBo Shen
The AT42QT1070 QTouch sensor supports up to 7 keys. The driver has been tested on Atmel AT91SAM9M10-G45-EK board, and it should work fine on other platforms. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: mcs_touchkey - add shutdown handlerHeungJun Kim
The MCS50XX series has a HW bug that requires explicit chip power down. If chip is not powered down before shutting the system down the control pins (powerup, interrupt) are pulled up and residue current continues flowing into the chips making them continue consuming power. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: mcs_touchkey - add support for suspend/resumeHeungjun Kim
This adds support for system-level suspend/resume to the driver. Signed-off-by: Heungjun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: omap4-keypad - wire up runtime PM handlingAbraham Arce
Enable Runtime PM functionality in OMAP4 driver based on the following assumptions: - keyboard controller in wakeup domain so it is always on and power impact is minimal; - in OMAP4 the device control is at module/device level and ick/fclk level control is difficult so cutting of clocks will prevent interrupts. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: max7359 - convert to dev_pm_opsMark Brown
There is a general move to convert drivers to use dev_pm_ops rather than bus specific ops to facilitate core work. Do this conversion for max7359. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: lm8323 - convert to dev_pm_opsMark Brown
There is a general move away from bus specific PM operations to using dev_pm_ops in order to facilicate core improvements. Update lm8323 to the new model. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-18Input: tegra-kbc - add function keymapRakesh Iyer
Add Fn keymap support to allow for internal processing of Fn keys. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - retry failed resets when reconnecting Input: synaptics - fix reconnect logic on MT devices Input: tegra-kbc - fix keymap entry for LeftMeta key Input: tegra-kbc - fix build error
2011-01-28Input: tegra-kbc - fix keymap entry for LeftMeta keyRakesh Iyer
Correct key mapping for Left Meta key. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-28Input: tegra-kbc - fix build errorRakesh Iyer
Fix build error introduced by variable name change. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - pass touch resolution to clients through input_absinfo Input: wacom - add 2 Bamboo Pen and touch models Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup Input: tegra-kbc - add tegra keyboard driver Input: gpio_keys - switch to using request_any_context_irq Input: serio - allow registered drivers to get status flag Input: ct82710c - return proper error code for ct82c710_open Input: bu21013_ts - added regulator support Input: bu21013_ts - remove duplicate resolution parameters Input: tnetv107x-ts - don't treat NULL clk as an error Input: tnetv107x-keypad - don't treat NULL clk as an error Fix up trivial conflicts in drivers/input/keyboard/Makefile due to additions of tc3589x/Tegra drivers
2011-01-20Input: tegra-kbc - add tegra keyboard driverRakesh Iyer
This patch adds support for the internal matrix keyboard controller for Nvidia Tegra platforms. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-20Input: gpio_keys - switch to using request_any_context_irqPhilippe Langlais
The driver does not require hardirq context and can work with threaded interrupts as well, so let's switch to request_any_context_irq which will select the context that is available for us. Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Input: tnetv107x-keypad - don't treat NULL clk as an errorJamie Iles
We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add SW_ROTATE_LOCK switch type Input: fix force feedback capability query example Input: wacom_w8001 - add single-touch support Input: add Austria Microsystem AS5011 joystick driver Input: remove aaed2000 keyboard driver Input: i8042 - introduce 'notimeout' blacklist for Dell Vostro V13 Input: cy8ctmg110_ts - Convert to dev_pm_ops Input: migor_ts - convert to dev_pm_ops Input: mcs5000_ts - convert to dev_pm_ops Input: eeti_ts - convert to dev_pm_ops Input: ad7879 - convert I2C to dev_pm_ops
2011-01-11Merge branch 'next' into for-linusDmitry Torokhov
2011-01-08Input: remove aaed2000 keyboard driverJamie Iles
The only platform using this driver (mach-aaec2000) is no longer in the kernel so remove the driver. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits) Input: wacom_w8001 - support pen or touch only devices Input: wacom_w8001 - use __set_bit to set keybits Input: bu21013_ts - fix misuse of logical operation in place of bitop Input: i8042 - add Acer Aspire 5100 to the Dritek list Input: wacom - add support for digitizer in Lenovo W700 Input: psmouse - disable the synaptics extension on OLPC machines Input: psmouse - fix up Synaptics comment Input: synaptics - ignore bogus mt packet Input: synaptics - add multi-finger and semi-mt support Input: synaptics - report clickpad property input: mt: Document interface updates Input: fix double equality sign in uevent Input: introduce device properties hid: egalax: Add support for Wetab (726b) Input: include MT library as source for kerneldoc MAINTAINERS: Update input-mt entry hid: egalax: Add support for Samsung NB30 netbook hid: egalax: Document the new devices in Kconfig hid: egalax: Add support for Wetab hid: egalax: Convert to MT slots ... Fixed up trivial conflict in drivers/input/keyboard/Kconfig
2011-01-07input/tc3589x: fix compile errorDan Carpenter
There was a semi-colon missing and it broke the compile. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-06Merge branch 'next' into for-linusDmitry Torokhov
Conflicts: include/linux/input.h
2011-01-06Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-03Merge branch 'ux500-core' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
2010-12-29input/tc3589x: add tc3589x keypad supportSundar Iyer
Add support for the keypad controller module found on the TC3589X devices. This driver default adds the support for TC35893 device. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> [Some minor fixups for compilation] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-22Keyboard: omap-keypad: use matrix_keypad.hJanusz Krzysztofik
Most keypad drivers make use of the <linux/input/matrix_keypad.h> defined macros, structures and inline functions. Convert omap-keypad driver to use those as well, as suggested by a compile time warning, hardcoded into the OMAP <palt/keypad.h>. Created against linux-2.6.37-rc5. Tested on Amstrad Delta. Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to board-h4. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07Input: tca6416-keypad - add support for tca6408aTony SIM
Support 8-bit tca6408a I/O expander as a keypad. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-06Input: add input driver for polled GPIO buttonsGabor Juhos
The existing gpio-keys driver can be usable only for GPIO lines with interrupt support. Several devices have buttons connected to a GPIO line which is not capable to generate interrupts. This patch adds a new input driver using the generic GPIO layer and the input-polldev to support such buttons. [Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more of the original gpio_keys infrastructure; cleanups and other improvements.] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-19Input: add support for keyboards on ST SPEAr platformRajeev Kumar
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04Input: atkbd - add 'terminal' parameter for IBM Terminal keyboardsBenjamin LaHaise
Many of the IBM Terminal keyboards from the 1980s and early 1990s communicate using a protocol similar, but not identical to the AT keyboard protocol. (Models known to be like this include 6110344, 6110668, 1390876, 1386887, and possibly others.) When the connector is rewired or adapter to an AT-DIN or PS/2 connector, they can be connected to a standard PC, with three caveats: a) They can only use scancode set 3; requests to use anything else are quietly ignored. b) The AT Command to request Make, Break and Repeat codes is not properly interpreted. c) The top function keys on a 122 key keyboard, and the arrow/edit keys in the middle of the board send non-standard scancodes. C) is easily taken care of in userspace, by use of setkeycodes B) can be taken care of by a userspace hack (that makes the kernel complain in dmesg) A) is fixable in theory, but on the keyboard i tested on (6110668), it seems to be detected unoverridably as Set 2, causing userspace oddities that make it harder to fix C). Enclosed is a small patch to the kernel that fixes A) and B) in the kernel, making it much easier to fix C) in userspace. It adds a single kernel command line parameter that overrides the detection that sets these boards as set 2, and instead of sending the Make-break-repeat command to the keyboard, it sends the make-break command, which is properly recognized by these keyboards. Software level key repeating seems to make up for the lack of hardware repeat codes perfectly. Without manually setting the command line parameter (tentatively named atkbd.terminal), this code has no effect, and the driver works exactly as before. See also: http://www.seasip.info/VintagePC/ibm_1390876.html http://www.seasip.info/VintagePC/ibm_6110344.html http://geekhack.org/showwiki.php?title=Island:7306 Signed-off-by: Erika Quinn <erikas.aubade@gmail.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-03Input: adp5588-keys - unify common header definesMichael Hennerich
Unify adp5588-gpio and adp5588-keys common header defines (as per Andrew Morton request). For consistency, move remaining defines and prefix accordingly. No functional changes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-27input: jornada680_kbd: ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-21Merge branch 'davinci-next' into davinci-for-linusKevin Hilman
Conflicts: arch/arm/mach-davinci/board-da830-evm.c arch/arm/mach-davinci/board-da850-evm.c
2010-10-18Input: adp5588-keys - use more obvious i2c_device_id name stringMichael Hennerich
KBUILD_MODNAME normalizes "-" to "_". This is non-obvious and results in the id name for ADP5588 being "adp5588_keys" while the other supported id is "adp5587-keys". So avoid this define and use an explicit string as the id name. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - wake-up on events & long pressesMike Turquette
Program keyboard controller to generate a wake-up request on events and on long key presses. It will not generate wake-up requests on timeouts since driver code does not handle them. This allows keyboard to wake-up OMAP from suspend. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - fix interrupt line configurationAbraham Arce
Select correct interrupt line behaviour. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - SYSCONFIG register configurationAbraham Arce
Remove SYSCONFIG register configuration, omap hwmod framework will use internal API to modify as required. Other minor updates: - Change a variable name from DEF to VAL, this represents a value - Break line width to 80 characters Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - use platform device helpersAbraham Arce
Get mem and irq resources using platform helpers - platform_get_base - platform_get_irq Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: add support for Nomadik SKE keypad controllerSundar Iyer
Add support for the keypad controller in the Scroll Key Encoder (SKE) module on the Nomadik family and the DB8500 SoC. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: twl4030_keypad - fix error handling pathDmitry Torokhov
We should not try to call free_irq() when request_irq() failed. Reported-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: hil_kbd - add missing MODULE_DEVICE_TABLE()Dzianis Kahanovich
Signed-off-by: Dzianis Kahanovich <mahatma@eu.by> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-09ARM: pxa27x_keypad: added wakeup event handler for keypad interruptsMark F. Brown
mach-mmp needs to clear wake event in order to clear the keypad interrupt Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa168: added keypad supportMark F. Brown
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09ARM: pxa: moved pxa27x_keypad.h to platform pxa directoryMark F. Brown
mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-24input: add driver for tnetv107x on-chip keypad controllerCyril Chemparathy
This patch adds support for tnetv107x's on-chip keypad controller. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-17 03:05:46 +0000