aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2014-01-07drivers: gpu: Mark function as static in radeon_object.cRashika Kheria
Mark function radeon_bo_clear_va() as static in drm/radeon/radeon_object.c because it is not used outside this file. This eliminates the following warning in drm/radeon/radeon_object.c: drivers/gpu/drm/radeon/radeon_object.c:49:6: warning: no previous prototype for ‘radeon_bo_clear_va’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-07drm/radeon: warn users when hw_i2c is enabled (v2)Alex Deucher
The hw i2c engines are disabled by default as the current implementation is still experimental. Print a warning when users enable it so that it's obvious when the option is enabled. v2: check for non-0 rather than 1 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-01-07drm/i915: avoid unclaimed registers when capturing the error statePaulo Zanoni
We're iterating over the CPU transcoders, so check for the correct power domain. This fixes many "unclaimed register" error messages. This can be reproduced by the IGT test mentioned below, but we still get a FAIL when we run it. Testcase: igt/kms_lip/flip-vs-panning-vs-hang Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Flush outstanding requests before allocating new seqnoChris Wilson
In very rare cases (such as a memory failure stress test) it is possible to fill the entire ring without emitting a request. Under this circumstance, the outstanding request is flushed and waited upon. After space on the ring is cleared, we return to emitting the new command - except that we just cleared the seqno allocated for this operation and trigger the sanity check that a request is only ever emitted with a valid seqno. The fix is to rearrange the code to make sure the allocation of the seqno for this operation is after any required flushes of outstanding operations. The bug exists since the preallocation was introduced in commit 9d7730914f4cd496e356acfab95b41075aa8eae8 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:52 2012 +0000 drm/i915: Preallocate next seqno before touching the ring Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: remove duplicate MODULE_LICENSE definitionJani Nikula
Multiple definitions show up multiple times in modinfo output. There's already an identical one in i915_drv.c along with other MODULE_* definitions, so drop the lone one in intel_fbdev.c. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/exynos: fix build error caused by removed drm core macrosSeung-Woo Kim
DRM_HZ and DRM_WAKEUP macros are removed, but they still remained. So this patch fixes build errors by replacing the macros. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-01-07drm/exynos: use a new anon file for exynos gem mmaperInki Dae
This patch resolves potential deadlock issue that can be incurred by changing file->f_op and filp->private_data to exynos specific mapper ops and gem object temporarily. To resolve this issue, this patch creates a new anon file dedicated to exynos specific mmaper, and making it used instead of existing one. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2014-01-07drm/i915/ppgtt: Fix ioctl errno for "no such context"Ben Widawsky
Without this fix the ioctls silently succeeded (but actually did nothing). It makes all the code which calls into this function way too confusing. v2: Fix destroy IOCTL as well v3: Clarify the other two callers of i915_gem_context_get() to never check for NULL. (Mika) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72903 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Testcase: igt/gem_ctx_exec/basic [danvet: Fix up the commit message and actually bother to mention the testcase this fixes.] Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Avoid dereference past end of page array in ↵Chris Wilson
gen8_ppgtt_insert_entries() The bug from gen6_ppgtt_insert_entries() was replicated into gen8_ppgtt_insert_entries(). This applies the fix for the OOPS from the previous patch to the gen8 routine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Avoid dereference past end of page array in ↵Chris Wilson
gen6_ppgtt_insert_entries() [ 89.237347] BUG: unable to handle kernel paging request at ffff880096326000 [ 89.237369] IP: [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237382] PGD 2272067 PUD 25df0e067 PMD 25de5c067 PTE 8000000096326060 [ 89.237394] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 89.237404] CPU: 1 PID: 1981 Comm: gem_concurrent_ Not tainted 3.13.0-rc4+ #639 [ 89.237411] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012 [ 89.237420] task: ffff88024c038030 ti: ffff88024b130000 task.ti: ffff88024b130000 [ 89.237425] RIP: 0010:[<ffffffff81347227>] [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237435] RSP: 0018:ffff88024b131ae0 EFLAGS: 00010286 [ 89.237440] RAX: ffff880096325000 RBX: 0000000000000400 RCX: 0000000000001000 [ 89.237445] RDX: 0000000000000200 RSI: 0000000000000001 RDI: 0000000000000010 [ 89.237451] RBP: ffff88024b131b30 R08: ffff88024cc3aef0 R09: 0000000000000000 [ 89.237456] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88024cc3ae00 [ 89.237462] R13: ffff88024a578000 R14: 0000000000000001 R15: ffff88024a578ffc [ 89.237469] FS: 00007ff5475d8900(0000) GS:ffff88025d020000(0000) knlGS:0000000000000000 [ 89.237475] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.237480] CR2: ffff880096326000 CR3: 000000024d531000 CR4: 00000000001407e0 [ 89.237485] Stack: [ 89.237488] ffff880000000000 0000020000000000 ffff88024b23f2c0 0000000100000000 [ 89.237499] 0000000000000001 000000000007ffff ffff8801e7bf5ac0 ffff8801e7bf5ac0 [ 89.237510] ffff88024cc3ae00 ffff880248a2ee40 ffff88024b131b58 ffffffff813455ed [ 89.237521] Call Trace: [ 89.237528] [<ffffffff813455ed>] ppgtt_bind_vma+0x3d/0x60 [ 89.237534] [<ffffffff8133d8dc>] i915_gem_object_pin+0x55c/0x6a0 [ 89.237541] [<ffffffff8134275b>] i915_gem_execbuffer_reserve_vma.isra.14+0x5b/0x110 [ 89.237548] [<ffffffff81342a88>] i915_gem_execbuffer_reserve+0x278/0x2c0 [ 89.237555] [<ffffffff81343d29>] i915_gem_do_execbuffer.isra.22+0x699/0x1250 [ 89.237562] [<ffffffff81344d91>] ? i915_gem_execbuffer2+0x51/0x290 [ 89.237569] [<ffffffff81344de6>] i915_gem_execbuffer2+0xa6/0x290 [ 89.237575] [<ffffffff813014f2>] drm_ioctl+0x4d2/0x610 [ 89.237582] [<ffffffff81080bf1>] ? cpuacct_account_field+0xa1/0xc0 [ 89.237588] [<ffffffff81080b55>] ? cpuacct_account_field+0x5/0xc0 [ 89.237597] [<ffffffff811371c0>] do_vfs_ioctl+0x300/0x520 [ 89.237603] [<ffffffff810757a1>] ? vtime_account_user+0x91/0xa0 [ 89.237610] [<ffffffff810e40eb>] ? context_tracking_user_exit+0x9b/0xe0 [ 89.237617] [<ffffffff81083d7d>] ? trace_hardirqs_on+0xd/0x10 [ 89.237623] [<ffffffff81137425>] SyS_ioctl+0x45/0x80 [ 89.237630] [<ffffffff815afffa>] tracesys+0xd4/0xd9 [ 89.237634] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 83 45 bc 01 49 8b 84 24 78 01 00 00 65 ff 0c 25 e0 b8 00 00 8b 55 bc <4c> 8b 2c d0 65 ff 04 25 e0 b8 00 00 49 8b 45 00 48 c1 e8 2d 48 [ 89.237741] RIP [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170 [ 89.237749] RSP <ffff88024b131ae0> [ 89.237753] CR2: ffff880096326000 [ 89.237758] ---[ end trace 27416ba8b18d496c ]--- This bug dates back to the original introduction of the gen6_ppgtt_insert_entries() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Dropped cc: stable since without full ppgtt there's no way we'll access the last page directory with this function since that range is occupied (only in the allocator) with the ppgtt pdes. Without aliasing we can start to use that range and blow up.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/i915: Mention when we enable the Ironlake iommu workaroundsChris Wilson
The iommu and gfx on Ironlake do not like each other and require a big hammer to prevent hard machine hangs. In commit 5c0422878fcdc279ae9a8e8b66972a15b5efb67f Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 17 15:51:55 2011 -0700 drm/i915: ILK + VT-d workaround we added the workaround, but never emitted any debug message that it was active. Doing so should help identify known performance regressions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07drm/nouveau: return offset of allocated notifierBob Gleitsmann
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nouveau/bios: make jump conditionalIlia Mirkin
This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943 Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org
2014-01-07drm/nvce/mc: fix msi rearm on GF114Sid Boyce
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nvc0/gr: fix mthd data submissionKelly Doran
If the initial data element is 0, it will never be written, even though the value from the previous method may be there. Signed-off-by: Kelly Doran <kel.p.doran@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-07drm/nouveau: populate master subdev pointer only when fully constructedBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-01-06drivers: gpu: Mark function as static in cdv_intel_dp.cRashika Kheria
Mark function cdv_intel_fixed_panel_mode() as static in drm/gma500/cdv_intel_dp.c because it is not used outside this file. This eliminates the following warning in drm/gma500/cdv_intel_dp.c: drivers/gpu/drm/gma500/cdv_intel_dp.c:680:6: warning: no previous prototype for ‘cdv_intel_fixed_panel_mode’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-01-06Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM"Alexander van Heukelum
My Acer 8510TZ stops displaying anything when X starts with Linus' current tree. I bisected it down to commit ee1452d74584. This patch reverts commit ee1452d74584. After the revert, everything works as before. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Reported-by: Dylan Borg <borgdylan@hotmail.com> (for a Acer Extensa 5635Z) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-06drm/i915/bdw: Flush system agent on gen8 alsoBen Widawsky
gem_gtt_cpu_tlb seems to indicate that it is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72869 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-06drm/i915: Fix refcount leak and possible NULL pointerdereference.Tetsuo Handa
Since get_pid_task() grabs a reference on the task_struct, we have to drop the refcount after reading that task's comm name. Use pid_task() with RCU instead. Also, avoid directly reading like pid_task()->comm because pid_task() will return NULL if the task have already exit()ed. This patch fixes both problems. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-05ACPI / nouveau: replace open-coded _DSM code with helper functionsJiang Liu
Use helper functions to simplify _DSM related code in nouveau driver. After analyzing the ACPI _DSM related code, I changed nouveau_optimus_dsm() to expect a buffer and nouveau_dsm() to expect an integer only. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-05nouveau / ACPI: fix memory leak in ACPI _DSM related codeJiang Liu
Fix memory leak in function nouveau_optimus_dsm() and nouveau_dsm(). Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-05ACPI / i915: replace open-coded _DSM code with helper functionsJiang Liu
Use helper functions to simplify _DSM related code in i915 driver. Function intel_dsm() is used to check functions supported by ACPI _DSM method, but it has strange check for special value 0x80000002. After digging into nouveau driver, I think the check is copied from nouveau driver and is useless for i915 driver, so remove it. Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-03Merge tag 'pm+acpi-3.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PM fixes and new device IDs from Rafael Wysocki: "These commits, except for one, are regression fixes and the remaining one fixes a divide error leading to a kernel panic. The majority of the regressions fixed here were introduced during the 3.12 cycle, one of them is from this cycle and one is older. Specifics: - VGA switcheroo was broken for some users as a result of the ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some previously ignored hotplug events started to be handled. The fix causes them to be ignored again. - There are two more issues related to cpufreq's suspend/resume handling changes from the 3.12 cycle addressed by Viresh Kumar's fixes. - intel_pstate triggers a divide error in a timer function if the P-state information it needs is missing during initialization. This leads to kernel panics on nested KVM clients and is fixed by failing the initialization cleanly in those cases. - PCI initalization code changes during the 3.9 cycle uncovered BIOS issues related to ACPI wakeup notifications (some BIOSes send them for devices that aren't supposed to support ACPI wakeup). Work around them by installing an ACPI wakeup notify handler for all PCI devices with ACPI support. - The Calxeda cpuilde driver's probe function is tagged as __init, which is incorrect and causes a section mismatch to occur during build. Fix from Andre Przywara removes the __init tag from there. - During the 3.12 cycle ACPIPHP started to print warnings about missing _ADR for devices that legitimately don't have it. Fix from Toshi Kani makes it only print the warnings where they make sense" * tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug intel_pstate: Fail initialization if P-state information is missing ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI cpufreq: preserve user_policy across suspend/resume cpufreq: Clean up after a failing light-weight initialization ACPI / PCI / hotplug: Avoid warning when _ADR not present
2014-01-03drm/radeon: fix pptable.h portabilityAlex Deucher
The following isn't compatible with gcc 2.x: pragma pack(push, 1) ... pragma pack(pop) replace with: pragma pack(1) ... pragma pack() bug: https://bugzilla.kernel.org/show_bug.cgi?id=67961 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-31Merge branches 'acpi-pci-pm' and 'acpi-pci-hotplug'Rafael J. Wysocki
* acpi-pci-pm: PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI * acpi-pci-hotplug: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug ACPI / PCI / hotplug: Avoid warning when _ADR not present
2013-12-31ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplugRafael J. Wysocki
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
2013-12-26Merge tag 'tegra-for-3.14-dmas-resets-rework' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup From Stephen Warren: ARM: tegra: implement common DMA and resets DT bindings This series converts the Tegra DTs and drivers to use the common/ standard DMA and reset bindings, rather than custom bindings. It also adds complete documentation for the Tegra clock bindings without actually changing any binding definitions. This conversion relies on a few sets of patches in branches from outside the Tegra tree: 1) A patch to add an DMA channel request API which allows deferred probe to be implemented. 2) A patch to implement a common part of the of_xlate function for DMA controllers. 3) Some ASoC patches (which in turn rely on (1) above), which support deferred probe during DMA channel allocation. 4) The Tegra clock driver changes for 3.14. Consequently, this branch is based on a merge of all of those external branches. In turn, this branch is or will be pulled into a few places that either rely on features introduced here, or would otherwise conflict with the patches: a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid conflicts. b) The DRM tree, which introduces new code that relies on the reset controller framework introduced in this branch, and to avoid conflicts. * tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-24drm/radeon: remove generic rptr/wptr functions (v2)Alex Deucher
Fill in asic family specific versions rather than using the generic version. This lets us handle asic specific differences more easily. In this case, we disable sw swapping of the rtpr writeback value on r6xx+ since the hw does it for us. Fixes bogus rptr readback on BE systems. v2: remove missed cpu_to_le32(), add comments Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: enable dpm by default on CI APUsAlex Deucher
Dynamic power mangement works reliably now, so enable it by default. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: enable dpm by default on CI dGPUsAlex Deucher
Dynamic power mangement works reliably now, so enable it by default. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: enable gfx cgcg on CIK APUsAlex Deucher
Enable coarse grained clockgating. This works properly now that smc is initialized earlier than the rlc and cp. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: enable gfx cgcg on CIK dGPUsAlex Deucher
Enable coarse grained clockgating on CIK dGPUs. This works properly now that smc is initialized earlier than the rlc and cp. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/pm: move pm handling into the asic specific codeAlex Deucher
We need more control over the ordering of dpm init with respect to the rest of the asic. Specifically, the SMC has to be initialized before the rlc and cg/pg. The pm code currently initializes late in the driver, but we need it to happen much earlier so move pm handling into the asic specific callbacks. This makes dpm more reliable and makes clockgating work properly on CIK parts and should help on SI parts as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: switch on new late_enable callbackAlex Deucher
Right now it's called right after enable, but after reworking the dpm init order, it will get called later to accomodate loading the smc early, but enabling thermal interrupts and block powergating later after the ring tests are complete. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for KB/KVAlex Deucher
Make sure interrupts are enabled before we enable thermal interrupts. Also, don't powergate uvd, etc. until after the ring tests. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for CIAlex Deucher
Make sure interrupts are enabled before we enable thermal interrupts. Also, don't powergate uvd until after the ring tests. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for SIAlex Deucher
Make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for trinityAlex Deucher
Need to wait to enable cg and pg until after ring tests. Also make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for sumoAlex Deucher
Need to wait to enable cg and pg until after ring tests. Also make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for rv7xx-NIAlex Deucher
Make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add late_enable for rs780/rs880/rv6xxAlex Deucher
Make sure interrupts are enabled before we enable thermal interrupts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: add a late enable callbackAlex Deucher
Certain features need to be enabled after ring tests (e.g., powergating, etc.). Add a function pointer to split out late enable features. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: re-order firmware loading in preparation for dpm reworkAlex Deucher
We need to reorder the driver init sequence to better accomodate dpm which needs to be loaded earlier in the init sequence. Move fw init up so that it's available for dpm init. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/cik: drop cg_update from dpm codeAlex Deucher
I'm not entirely sure this is required and it won't work with the dpm restructing anyway. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/si: drop cg_update from dpm codeAlex Deucher
I'm not entirely sure this is required and it won't work with the dpm restructing anyway. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon/dpm: remove unnecessary checks in dpm_initAlex Deucher
No need to check rdev->pm.num_power_states; this is a vestige of the old pm code. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: add GART debugfs access v3Christian König
v2: add default_llseek v3: set inode size in the open callback Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: add VRAM debugfs access v3Christian König
Not very fast, but makes it possible to access even the normally inaccessible parts of VRAM from userspace. v2: use MM_INDEX_HI for >2GB mem access, add default_llseek v3: set inode size in the open callback Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-24drm/radeon: cleanup radeon_ttm debugfs handlingChristian König
Otherwise we not necessary export the right information. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2026-04-02 11:50:16 +0000